Search results

The purpose of this study is to investigate the effect of panel connections on the hygrothermal performance of facade panels using a coupled, transient heat and moisture transfer analysis.

A coupled, transient heat and moisture transfer analysis has been conducted to investigate the effect of panel connections in the hygrothermal behavior of facade panels. Governing partial differential equations for the coupled heat and moisture transfer were formulated. Four panel connections proposed by pre-cast/pre-stressed concrete institute were modeled for the ultra-high performance fiber-reinforced concrete facade panel as illustrations and a finite element method was used to solve the numerical models.

The results of heat transfer analysis showed that steel connections could significantly reduce the thermal resistivity of facade panels by converging heat fluxes and acting as thermal bridges within facade panels. The results also showed that the maximum heat flux in the steel connector of the panel to foundation connection was 10 times higher compared to the other connections. Also, the results of moisture transfer showed that air gaps between the panels had higher moisture flux compared to the other layers in the models. The results show the significant importance of panel connections in the energy performance analysis of facade systems. They also highlight the importance of devising novel connection designs and materials that consider the transient, coupled heat and moisture transfer in the connections to effectively exploit the potential opportunities provided by innovative facade systems to improve building energy efficiency.

This paper, for the first time, investigates the effect of panel connections in the hygrothermal performance of building facade systems using a coupled, transient heat and moisture transfer analysis.

The purpose of this paper is to present a numerical model of coupled heat, moisture transfer and their effects on the mechanical deformations of wood during the drying process.

Coupling among heat, moisture, and mechanical deformations is solved consecutively by use of sparse solver of MATLAB. The weighted residual of the equilibrium equations of drying process of wood, based on finite element method, is investigated. The stress and plastic strain increments can be solved with Newton's method.

The numerical model is applied to a plain strain problem of a long wood board taken from the outer region of the wood log. Numerical simulation reveals the stress reversal during the drying process. The mechanical deformations and the principle stresses of a three‐dimensional wood board in consideration of the orthotropic properties are presented.

Plane strain and plane stress are analysed. The tangential modulus is derived. The transformation of the stress and strain tensors between the local coordinate system resulting from the cylindrical properties of wood and the global one is evaluated. Selection of element type for temperature, moisture content and displacement is discussed.

The purpose of this paper is to provide the details of developments to researchers in test apparatus and evaluation methods to rate the thermal protective performance (TPP) of firefighters’ clothing under high-temperature and high-humidity condition.

This review paper describes the influence laws of moisture on thermal protection and the moisture distribution in actual fire environment. Different evaluation methods used for assessing the effect of moisture on the TPP were investigated, with an emphasis on test devices, evaluation indexes as well as their relationship and limitations.

The moisture from the ambient, clothing and human perspiration plays an important role in determining the TPP of firefighter protective clothing. It is obvious that research on moisture-driven heat transfer in firefighter’s clothing system are comparatively little, primarily focussing on pre-wetted methods of multi-layer fabric. Further studies should be conducted to develop more standardized moistening systems and improve the current calculation methods for evaluating the performance of protective clothing. New explorations for heat and moisture transfer mechanism in protective clothing should be investigated.

Protective clothing is the efficient way to provide fire-fighting occupational safety. To accurately evaluate the TPP of protective clothing under high-temperature and high-humidity condition will help to optimize the clothing performance and choose the proper clothing for providing firefighters with the best protection under multiple thermal hazards.

This paper is offered as a concise reference for scientific community further research in the area of the TPP evaluation methods under high-temperature and high-humidity condition.

Computational results for the microwave heating of a porous material are presented in this paper. Combined finite difference time domain and finite volume methods were used to solve equations that describe the electromagnetic field and heat and mass transfer in porous media. The coupling between the two schemes is through a change in dielectric properties which were assumed to be dependent on both temperature and moisture content. The model was able to reflect the evolution of both temperature and moisture fields as well as energy penetration as the moisture in the porous medium evaporates. Moisture movement results from internal pressure gradients produced by the internal heating and phase change.

The purpose of this paper is to study heat and steam transfer in a vertical air gap and improve thermal protective performance of protective clothing under thermal radiation and hot steam.

An experiment-based model was introduced to analyze heat and moisture transfer in the vertical air gap between the protective clothing and human body. A developed test apparatus was used to simulate different air gap sizes (3, 6, 9, 12, 15, 18, 21 and 24 mm). The protective clothing with different air gap sizes was subjected to dry and wet heat exposures.

The increase of the air gap size reduced the heat and moisture transfer from the protective clothing to the skin surface under both heat exposures. The minimum air gap size for the initiation of natural convection in the dry heat exposure was between 6 and 9 mm, while the air gap size for the occurrence of natural convection was increased in the wet heat exposure. In addition, the steam mass flux presented a sharp decrease with the rising of the air gap size, followed by a stable state, mainly depending on the molecular diffusion and the convection mass transfer.

This research provides a better understanding of the optimum air gap under the protective clothing, which contributes to the design of optimum air gap size that provided higher thermal protection against dry and wet heat exposures.

The purpose of this paper is to provide the details of developments to research works in the distribution characteristics of the air gaps within firefighters’ clothing and research methods to evaluate the effect of air gaps on the thermal protective performance of firefighters’ clothing.

In this paper, the distribution of air gaps within firefighters’ clothing was first analyzed, and the air gaps characteristics were summarized as thickness, location, heterogeneity, orientation and dynamics. Then, the evaluation of the air gap on the thermal protective performance of fighters’ clothing was reviewed for both experimental and numerical studies.

The air gaps within clothing layers and between clothing and skin play an important role in determining the thermal protective performance of firefighters’ protective clothing. It is obvious that research works on the effects of actual air gaps entrapped in firefighters’ clothing on thermal protection are comparatively few in number, primarily focusing on static and uniform air gaps at the fabric level. Further studies should be conducted to define the characteristic of air gap, deepen the understand of mechanism of heat transfer and numerically simulate the 3D dynamic heat transfer in clothing to improve the evaluation of thermal protective performance provided by the firefighters’ clothing.

Air gaps within thermal protective clothing play a crucial role in the protective performance of clothing and provide an efficient way to provide fire-fighting occupational safety. To accurately characterize the distribution of air gaps in firefighters’ clothing under high heat exposure, the paper will provide guidelines for clothing engineers to design clothing for fighters and optimize the clothing performance.

This paper is offered as a concise reference for researchers’ further research in the area of the effect of air gaps within firefighters’ clothing under thermal exposure.

The purpose of this paper is to investigate the effect of air and vapor permeability of jacket materials on ventilation, heat and moisture transfer.

Clothing ventilation (V), thermal insulation (I) and vapor resistance (R _e ) of three jackets made of different materials (normal textile, PVC and “breathable” membrane coated textile), worn on an articulated thermal manikin in a controlled climate chamber, were measured under various conditions, respectively. The various conditions of microenvironment ventilation were created by making the manikin stand and walk, combined with three wind speeds of <0.2, 0.4 and 2.0 m/s, respectively.

In the condition without any forced convection, the air permeability makes no big difference to dry and evaporative heat transfer among the jackets, while the vapor permeability plays a big role in the evaporative heat loss. In the condition with forced convection, the dry heat diffusion is strongly coupled to the evaporative heat transfer in air and vapor permeable textile material.

The effects of ventilation on heat and moisture transfer varies because of different ways of ventilation arising: penetration through the fabric is proven to be the most effective way in vapor transfer although it does not seem as helpful for dry heat diffusion.

The achievements in this paper deepens the understanding of the process of the dry and evaporative heat transfer through clothing, provides clothing designer guidance to choose proper materials for a garment, especially work clothing.

A three‐dimensional numerical analysis was carried out to study in detail the combined heat and mass transfer processes between a moist air flow and a cooled surface when film condensation occurs. A cross‐flow was considered between the air flow and the film flow. A turbulent flow was modelled using the Wilcox k−ω turbulence model. The shape of the interface between the air and the film was treated as a moving boundary, and it was calculated with the assumptions that the interface ways remain an interface, the stress at the interface is continuous and that there is no slip at the interface. Numerical results were obtained by solving simultaneous coupled equations of the air, film and solid. The results show that the condensate film flow has a significant effect on the extended surface temperature distribution and consequently on its efficiency. It is shown that the simultaneous influence of gravity and the air flow on the condensate film results in an asymmetric velocity profile in the film as well as in the asymmetric shape of the film.

A numerical study is carried out to investigate the influence of multistage drying regimes on the drying kinematics of a porous material. In particular the effects of varying the conditions of the drying medium are studied. The drying model for the solid is developed based on the continuum approach. A series of simulations of the drying behaviour of a rectangular brick with varying temperature, heat transfer coefficient and relative humidity of the drying medium are undertaken. It is found that the total drying time is mainly dependent on the relative humidity of the drying medium. Also condensation is predicted on the surface of the brick, with the quantity of condensation being directly linked to the relative humidity and temperature of the drying medium. Overall it is concluded that multistage drying regimes are useful in reducing the overall drying time whilst avoiding detrimental shrinkage during the constant drying period.

A fully coupled numerical model to simulate the complex behaviour of soil deformation, water flow, airflow, and heat flow in porous media is developed. The following thermal effects are taken into account: heat transfer through conduction and convection, flow, as well as viscosity and density variation of the fluids due to temperature gradients. The governing equations in terms of soil displacements, water and air pressures, and temperature are coupled non‐linear partial differential equations and are solved by the finite element method. Two examples are presented to demonstrate the model performances.