Search results

Construction industry is a vital sector for economic and national development. However, the industry suffers buildability problems. Improving construction projects buildability is the duty of every key stakeholder. Thus, this study aims to identify and evaluate the project designers’ roles in improving construction projects buildability in Nigeria.

This study adopted quantitative research method. A purposive sampling approach was used in identifying the representative sample for the administration of the questionnaire survey. A total of 122 questionnaires were distributed to the targeted construction professionals, out of which 93 questionnaires were sufficiently filled and returned, representing a response rate of 76%. This study used descriptive and inferential statistics for data analyses.

The results from factors analysis show that the roles of project designers in improving construction projects buildability in Nigeria can be categorised into two constructs: “discuss fully the design objectives with builders” and “prepare cost effective and buildable designs”.

This study contributed to more effective buildability studies by highlighting the roles of project designers in improving construction projects buildability in the construction industry. An understanding of these roles is vital for reducing buildability problems as well as for improving and embedding buildability as a practice in construction management.

Nanosensors have a wide range of applications because of their high sensitivity, selectivity and specificity. In the past decade, extensive and pervasive research related to nanosensors has led to significant progress in diverse fields, such as biomedicine, environmental monitoring and industrial process control. This led to better and more efficient detection and monitoring of physical and chemical properties at better resolution, opening new horizons in the development of novel technologies and applications for improved human health, environment protection, enhanced industrial processes, etc.

In this paper, the authors discuss the application of citation network analysis in the field of nanosensor research and development. Cluster analysis was carried out using papers published in the field of nanomaterial-based sensor research, and an in-depth analysis was carried out to identify significant clusters. The purpose of this study is to provide researchers to identify a pathway to the emerging areas in the field of nanosensor research. The authors have illustrated the knowledge base, knowledge domain and knowledge progression of nanosensor research using the citation analysis based on 3,636 Science Citation Index papers published during the period 2011 to 2021.

Among these papers, the bibliographic study identified 809 significant research publications, 11 clusters, 556 research sector keywords, 1,296 main authors, 139 referenced authors, 63 nations, 206 organizations and 42 journals. The authors have identified single quantum dot (QD)-based nanosensor for biological applications, carbon dot-based nanosensors, self-powered triboelectric nanogenerator-based nanosensor and genetically encoded nanosensor as the significant research hotspots that came to the fore in recent years. The future trend in nanosensor research might focus on the development of efficient and cost-effective designs for the detection of numerous environmental pollutants and biological molecules using mesostructured materials and QDs. It is also possible to optimize the detection methods using theoretical models, and generalized gradient approximation has great scope in sensor development.

The future trend in nanosensor research might focus on the development of efficient and cost-effective designs for the detection of numerous environmental pollutants and biological molecules using mesostructured materials and QDs. It is also possible to optimize the detection methods using theoretical models, and generalized gradient approximation has great scope in sensor development.

This is a novel bibliometric analysis in the area of “nanomaterial based sensor,” which is carried out in CiteSpace software.

The purpose of this paper is to investigate the process of fused filament fabrication (FFF) of a compliant gripper (CG) using thermoplastic polyurethane (TPU) material. The paper studies the applicability of different CG designs and the efficiency of some design parameters.

After reviewing a number of different papers, two designs were selected for a number of exploratory experiments. Using design of experiments (DOE) techniques to identify important design parameters. Finally, the efficiency of the parts was investigated.

The research finds that a simpler design sacrifices some effectiveness in exchange for a remarkable decrease in production cost. Decreasing infill percentage of previous designs and 3D printing them, out of TPU, experimenting with different parameters yields functional products. Moreover, the paper identified some key parameters for further optimization attempts of such prototypes.

The cost of conducting FFF experiments for TPU increases dramatically with product size, number of parameters studied and the number of experiments. Therefore, all three of these factors had to be kept at a minimum. Further confirmatory experiments encouraged.

This paper addresses an identified need to investigate applications of FFF and TPU in manufacturing functional efficient flexible mechanisms, grippers specifically. While most research focused on designing for increased performance, some research lacks discussion on design philosophy, as well as manufacturing issues. As the needs for flexible grippers vary from high-performance grippers to lower performance grippers created for specific functions/conditions, some effectiveness can be sacrificed to reduce cost, reduce complexity and improve applicability in different robotic assemblies and environments.

Project-based learning is one of the most effective methods of transferring academic knowledge and skills to real-world situations in higher education. However, its effectiveness is not much investigated focusing on the students' narrative. This study aims at evaluating the students' experience and perspective on adopting project-based learning in master by research and doctoral programmes for proactive skills development.

This study evaluates the self-reflection of 10 postgraduate students and their supervisor who have participated in developing a software tool for solar photovoltaics (PV) integrated building envelope design, management and the related education.

Findings reveal that the students have effectively improved their knowledge on the subject via collaborating with the industry, self-learning/observation, peer learning, problem-solving and teamwork. Dividing the project into student-led tasks has improved the decision-making and leadership skills, risks identification, planning and time management skills. The overall experience has (1) built up confidence in students, (2) enhanced their creativity and critical thinking and (3) improved their proactive skills and context knowledge.

A clear research gap can be seen in exploring the effectiveness of project-based learning for master by research and doctoral programmes, which mainly focus on extensive research. These programmes do not necessarily focus on developing students' proactive skills, which is the main requirement if they intend to work in the construction industry. This paper addresses the above research gap by demonstrating the effectiveness of project-based learning for developing the proactive skills in a research-intensive learning environment.

The concept of aging-in-place has gained notable significance in the last decade due to a dramatic demographic shift in global population dynamics that have considerably affected the ability of societies to adequately cater for their aging population. This paper examines some of the barriers to aging-in-place in the context of health needs, housing design and the role of retrofitting/smart home technologies in overcoming these barriers.

Using a narrative literature review approach, the authors undertook a comprehensive search of recent relevant literature focusing on five core thematic areas: health and aging, aging in place, barriers to aging in place, retrofitting and smart home technologies for successful aging in place. The authors entered appropriate keywords into interdisciplinary research databases and synthesized a coherent narrative discussing the thematic areas using the data extracted from the literature search.

There is a bidirectional relationship between aging and the home environment. Barriers to aging-in-place are mainly related to progressive decline in health, which alters the environmental needs of individuals. Appropriate building designs can significantly facilitate aging-in-place. The authors, therefore, highlight the role of retrofitting and smart home technologies as practical solutions to the challenges of the aging-in-place.

Forward planning in building design is essential to guarantee that the home environment is well adapted for the challenges of aging-in-place while also promoting healthy aging.

The paper shows the relationship between aging and the home environment and how building design considerations could enhance healthy aging-in-place.

Poor mental health in men and women is attributable to disparities in physical traits, social roles, power and health-seeking behaviours. This study aims to examine the gender differences in mental health among Pakistan and German university students and focuses on their right to seek mental health care.

Data on depression, anxiety and stress symptoms, as well as positive mental health (PMH), resilience, social support and life satisfaction, were gathered from Pakistani and German students.

In contrast to the Pakistani group, where no such gender differences were seen, women in Germany reported higher degrees of stress, anxiety and depression, as well as a lower level of overall good mental health. In comparison to German men and women, Pakistani women scored equally high on resilience. While gender had no bearing on life happiness in either Pakistan or Germany, women in both countries perceived more social support than men did.

The study’s strengths include its large sample size and battery of mental health measures. The results of partial weak measurement Invariance (MI) on the stress subscale underlined the importance of using MI in cross-cultural studies. The validity of a direct comparisons on sum score between different language versions or country samples shall be cautious. Still, there are limitations. Firstly, the authors did not differentiate gender and biological sex, and there was no group of non-binary gender. Pakistani (N = 1,840) and German (N = 7,890) students were in unequal numbers. Again, only university students were sampled, so the results cannot be generalised to older (probably less educated) populations. Self-reported data that mainly obtained via online survey were the third limitation. This design is cost-effective and easy to administer for cross-cultural survey research. However, social desirability and memory bias are common in self-report inventories. Fourthly, although English is an official language in Pakistan and the medium of instruction in education, the authors recommend future study to use questionnaires that have been translated and validated into Urdu (Pakistan’s national language) and investigate gender differences in a general population. Fifthly, this is a cross-sectional survey; the authors were not able to explore the causality or risk factors that contribute to the poor mental well-being in Pakistan students in general or the relatively worse mental health in German women. Future studies may investigate the mechanism behind the phenomena observed in this study with longitudinal or experimental design. Last but not least, Germany and Pakistan differ in so many different aspects from culture, religions and history to social structure and economic status, which make it hard to claim whether the observed differences were due to national differences, cultural differences, economic differences, gender inequality differences or other effects. It would be helpful for future studies to include more country samples with clear definitions of different “culture” aspects for a better understanding of gender differences in other countries and in different mental well-being constructs.

The current study is the first attempt to compare the gender difference patterns in positive and negative mental health between European and South Asian counties and focuses on gender-specific approaches. Although Pakistani university students reported in general worse mental well-being, the differences between the two genders in mental health (e.g. depression, anxiety, general PMH) were not as pronounced as in the German student sample. Gender comparisons in these mental health constructs would help to improve protective factors against mental illness and to develop appropriate management programmes based on cultural differences. The results suggest that the gender differences found in western countries cannot always be directly translated into the South Asian cultural framework. Our results also highlight the importance of improving the general situation of Pakistan (students) instead of focusing on one gender. At the same time, in Germany, prevention and intervention plans are more warranted for women. It could be that once the general situation in Pakistan is improved, the gender-related differences in mental health will be clearly observed.

These findings imply the significance of cultural context when inferring gender variations in mental health. Moreover, it supports the advancement of comprehensive policies to reduce gender-related mental health inequalities and focuses on the equal rights of men and women to get mental health care.

The purpose of this paper was to study the possibility of using smartphone roughness measurements for developing pavement roughness regression models as a function of pavement age, traffic loading and traffic volume variables. Also, the effects of patching and pavement distresses on pavement roughness were investigated. The work focused on establishing pavement roughness prediction models and applying these models to pavement management systems (PMS) to help decision-makers choose the best maintenance and rehabilitation (M&R) options by using cost-effective methods.

Signal processing techniques including filtering and processing techniques were used to obtain the International Roughness Index (IRI) from raw acceleration data collected from smartphone accelerometer sensors. The obtained IRI values were inputted as a dependent variable in analytical regression models as well as several independent variables with proper transformations.

According to the study results, several regression models were developed with a big variation in the coefficients of determination (R²). However, the best models included pavement age, accumulated traffic volume (∑TV) and construction quality factor (CQF) with R² equal to 0.63. It was also found that the effects of pavement distresses and patching was significant at a-level < 0.05. The patching effect on pavement roughness was found higher than the effect of other pavement distresses.

The presented results and methods in this paper could be used in the future predictions of pavement roughness and help the decision-makers to estimate M&R needs. The work focused on establishing IRI prediction models and applying these models to the PMS to help decision-makers choose the best M & R options.

To develop sound pavement roughness models, it is essential to collect roughness data using automated procedures. However, applying these procedures in developing countries faces several difficulties such as the high price and operation costs of roughness equipment and lack of technical experience. The advantage of using IRI values taken from smartphones is that the roughness evaluation survey may be expanded to cover the full road network at a cheaper cost than with automated instruments. Therefore, if the roughness survey covers more roads, the prediction model’s accuracy will be improved.

This paper aims to compare and evaluate the influence of package designs and characteristics on the mechanical reliability of electronic assemblies when subjected to harmonic vibrations.

Using finite element analysis (FEA), the effect of package design-related parameters, including the interconnect array configuration, i.e. full vs perimeter, and package size, on solder mechanical stresses are fully addressed.

The results of FEA simulations revealed that the number of solder rows or columns available in the array, could significantly affect solder stresses. In addition, smaller packages result in lower solder stresses and differing distributions.

In literature, there are no papers that discuss the effect of solder array layout on electronic packages vibration reliability. In addition, general rules for designing electronic assemblies subjected to harmonic vibration loadings are proposed in this paper.

The purpose of this paper is to develop a building information modelling (BIM)-based multi-objective optimization (MOO) framework for volumetric analysis of buildings during early design stages. The objective is to optimize volumetric spaces (3D) instead of 2D spaces to enhance space utilization, thermal comfort, constructability and rental value of buildings

The integration of two fundamental concepts – BIM and MOO, forms the basis of proposed framework. In the early design phases of a project, BIM is used to generate precise building volume data. The non-sorting genetic algorithm-II, a MOO algorithm, is then used to optimize extracted volume data from 3D BIM models, considering four objectives: space utilization, thermal comfort, rental value and construction cost. The framework is implemented in context of a school of architecture building project.

The findings of case study demonstrate significant improvements resulting from MOO of building volumes. Space utilization increased by 30%, while thermal comfort improved by 20%, and construction costs were reduced by 10%. Furthermore, rental value of the case study building increased by 33%.

The proposed framework offers practical implications by enabling project teams to generate optimal building floor layouts during early design stages, thereby avoiding late costly changes during construction phase of project.

The integration of BIM and MOO in this study provides a unique approach to optimize building volumes considering multiple factors during early design stages of a project

This paper aims to give an oversight of what is being done by researchers in GIS and remote sensing (field) to explore minerals. The main objective of this review is to explore how GIS and remote sensing have been beneficial in identifying mineral deposits for easier and cost-effective mining.

The approach of this research used Web of Science to generate a database of published articles on the application of GIS and remote sensing techniques for mineral exploration. The literature was further digested, noting the main findings, adopted method, illustration and research scales.

When applied alone, each technique seems effective, but it is important to know that combining different methods is more effective in identifying ore deposits.

This paper also examined and provided possible solutions to both current and future perspective issues relating to the application of GIS and remote sensing to mineral exploration. The authors believe that the conclusions and recommendations drawn from case studies and literature review will be of great importance to geoscientists and policymakers.