Search results

This study aims to explore the viability of using C-17 reduced-engine taxi procedures from a cost savings and capability perspective.

This study model expected engine fuel flow based on the number of operational engines, aircraft gross weight (GW) and average aircraft groundspeed. Using this model, the research executes a cost savings simulation estimating the expected annual savings produced by the proposed taxi methodology. Operational and safety risks are also considered.

The results indicate that significant fuel and costs savings are available via the employment of reduced-engine taxi procedures. On an annual basis, the mobility air force has the capacity to save approximately 1.18 million gallons of jet fuel per year ($2.66m in annual fuel costs at current rates) without significant risk to operations. The two-engine taxi methodology has the ability to generate capable taxi thrust for a maximum GW C-17 with nearly zero risks.

This research was limited to C-17 procedures and efficiency improvements specifically, although it suggests that other military aircraft could benefit from these findings as is evident in the commercial airline industry.

This research recommends coordination with the original equipment manufacturer to rework checklists and flight manuals, development of a fleet-wide training program and evaluation of future aircraft recapitalization requirements intended to exploit and maximize aircraft surface operation savings.

If implemented, the proposed changes would benefit the society as government resources could be spent elsewhere and the impact on the environment would be reduced. This research conducted a rigorous analysis of the suitability of implementing a civilian airline’s best practice into US Air Force operations.

A boom in e-commerce in Korea has sparked off high daily-volume demand for small-sized home delivery services, which poses a great challenge to distribution networks, especially in urban areas where traffic congestion, accessibility, and pollution are serious problems. In addition, security issues for people who live in small townhouses and detached houses without security systems and guards have received increasing attention from the government and society. Thus, the introduction of a new alternative for home delivery services, unmanned parcel lockers, is urgent for residents living in these areas. This paper examines and compares potential socio-economic impacts in terms of costs and benefits when such lockers are installed at selected locations in residential areas. The results show that this policy is worthy of adoption, with several undeniable benefits to local communities. In addition, sensitivity analyses estimate the economic performance of this project at different social discount rates, and they check the sensitivity of economic performance based on variations in the variables. The value of travel time savings was identified as a critical and dominating factor directly affecting economic performance.

Introducing additive manufacturing (AM) in a multinational corporation with a global spare parts operation requires tools for a dynamic supplier selection, considering both cost and delivery performance. In the switchover to AM from conventional manufacturing, the objective of this study is to find situations and ways to improve the spare parts service to end customers.

In this explorative study, the authors develop a procedure – in collaboration with the spare parts operations managers of a case company – for dynamic operational decision-making for the selection of spare parts supply from multiple suppliers. The authors' design proposition is based on a field experiment for the procurement and delivery of 36 problematic spare parts.

The practice intervention verified the intended outcomes of increased cost and delivery performance, yielding improved customer service through a switchover to AM according to situational context. The successful operational integration of dynamic additive and static conventional supply was triggered by the generative mechanisms of highly interactive model-based supplier relationships and insignificant transaction costs.

The dynamic decision-making proposal extends the product-specific make-to-order practice to the general-purpose build-to-model that selects the mode of supply and supplier for individual spare parts at an operational level through model-based interactions with AM suppliers. The successful outcome of the experiment prompted the case company to begin the introduction of AM into the company's spare parts supply chain.

This study aimed to bridge the gap between the financial measurement of process improvement ideas and Lean Six Sigma measurements. It was required to increase employee engagement in process improvement initiatives.

Through both a practical and theoretical application of the Design for Lean Six Sigma methodology, the researcher was able to design a process and a benefit measuring methodology that was acceptable by finance and aligns with the benefits expected from the elimination of the Lean wastes.

The project found that benefit measurement methodology is not understood by most employees, which leads to a lack of engagement in working on improvements. The result of the study was a model for employees to identify and quantify these benefits. This has resulted in a model for cost-benefit analysis aligning financial costs with non-value add waste costs and cost of poor-quality costs resulting in increased process improvement ideas and activity.

While this study was limited to one company, applying this methodology could benefit any company experiencing the same difficulties.

This is one of the first studies to try and cost the benefits of LSS projects both from an organisational and generic viewpoint.

Improving productivity and efficiency has always been crucial for industrial companies to remain competitive. In recent years, the topic of environmental impact has become increasingly important. Published research indicates that environmental and economic goals can enforce or rival each other. However, few papers have been published that address the interaction and integration of these two goals.

In this paper, we identify both, synergies and trade-offs based on a systematic review incorporating 66 publications issued between 1992 and 2021. We analyze, quantify and cluster examples of conjunctions of ecological and economic measures and thereby develop a framework for the combined improvement of performance and environmental compatibility.

Our findings indicate an increased significance of a combined consideration of these two dimensions of sustainability. We found that cases where enforcing synergies between economic and ecological effects were identified are by far more frequent than reports on trade-offs. For the individual categories, cost savings are uniformly considered as the most important economic aspect while, energy savings appear to be marginally more relevant than waste reduction in terms of environmental aspects.

No previous literature review provides a comparable graphical treatment of synergies and trade-offs between cost savings and ecological effects. For the first time, identified measures were classified in a 3 × 3 table considering type and principle.

This paper deals with network configurations in liner shipping and inland transportation from a carrier's perspective. The cost efficiency of different possible network configurations in the foreland-hinterland continuum is discussed based on a cost model and on a qualitative analysis. It is demonstrated that the tendency towards cargo concentration in a limited number of ports has led to the redesign of collection and distribution networks in the hinterland. Further cargo bundling in the foreland-hinterland continuum towards even fewer ports and inland centres is only interesting from a cost perspective if considerable economies of scale and density can be realised in the associated hinterland networks. The more cost efficient the network becomes, the less convenient that network could be for the shippers ' needs in terms of frequency and flex ibility. As such, the future configuration of liner shipping networks and inland transport networks will largely depend on the balance of power between carriers and shippers.

Considering the growing momentum of online marketplaces worldwide, the purpose of this paper is to develop a model to identify the main activities impacted by the implementation of an e-marketplace in the business-to-business relationship and assess the savings on costs for the main actors involved (i.e. manufacturer, distributor and retailer).

The methodology used in the study is a quantitative one. The analytical model used to evaluate B2b e-marketplace's impacts followed three main steps: (1) model settings and general assumptions, (2) cost structure and (3) model simulation.

The findings reveal that beyond stock-out costs and inventory levels also other operating costs (i.e. transportation, penalty and administrative costs) play a significant role in determining overall impacts of B2b e-marketplace, and as such should be considered by managers in their process of e-marketplace evaluation, selection and performance optimisation. The model shows that compared with the offline scenario the B2b e-marketplace is expected to bring value to the overall supply chain, which tends to increase as the share of e-sales penetration is increased, ranging from a cost reduction of 0.1% (€ 229.2k) in the base-case of 10% e-sales adoption, up to 0.9% (€ −2.2 M) in case of full e-marketplace adoption.

This study aims to shed light and foster the adoption of B2b e-marketplace by providing some practical tools to support (1) research in future studies, filling the existing gaps on the topic, and (2) managers in the process of adoption and execution of e-sales through online marketplaces.

The International Maritime Organization has decided that as of 1.1.2020, SOx content in a ship’s emissions should be no more than 0.5 per cent. The purpose of this paper is to address the various challenges expected to arise from the enforcement of the global cap sulfur regulation.

The authors outline various enforcement options and present a model that calculates the profits from noncompliance in the high seas, so as to help determine the level of fines that could be imposed in case of violation.

The main finding is that a harmonized system of fines, which are more than potential savings from cheating, would be a strong deterrent for compliance.

To the authors’ knowledge, no paper in the maritime literature on sulfur regulations has focused on enforcement as of yet.

Prefabricated products are continually entering the building construction market; yet, the decision to use prefabricated products in a construction project is based mostly on personal preferences and the evaluation of direct costs. Researchers and practitioners have debated appropriate measurement systems for evaluating the impacts of prefabricated products and for comparing them with conventional on-site construction practices. The more advanced, cost–benefit approach to evaluating prefabricated products often inspires controversy because it may generate inaccurate results when converting non-monetary effects into costs. As prefabrication may affect multiple organisations and product subsystems, the method used to decide on production methods should consider multiple direct and indirect impacts, including nonmonetary ones. Thus, this study aims to develop a multi-criteria method to evaluate both the monetary and non-monetary impacts of prefabrication solutions to facilitate decision-making on whether to use prefabricated products.

Drawing upon a literature review, this research suggests a multi-criteria method that combines the choosing-by-advantage approach with a cost–benefit analysis. The method was presented for validation in focus group discussions and tested in a case involving a prefabricated bathroom.

The analysis indicates that the method helps a project’s stakeholders communicate about the relative merits of prefabrication and conventional construction while facilitating the final decision of whether to use prefabrication.

This research contributes a method of evaluating the monetary and non-monetary impacts of prefabricated products. The research underlines the need to evaluate the diverse benefits and sacrifices that stakeholder face when considering production methods in construction.