Search results

The paper intends to show why farms as we know them today may soon be a thing of the past and that organisational behaviour research has an important contribution to make in assisting the upcoming transformation.

Two strains of literature are reviewed and then synthesised: the literature on robots replacing humans in agricultural production and the literature on vertical integration that shifts decisions to agribusiness. Then the potential contribution of organisational behaviour research is outlined.

It is shown how the farm is likely to lose both roles for which their geographic entity is important: making decisions and carrying out production. This requires contributions from organisational behaviour research in the realms of decision designs and social systems.

It can be anticipated that the most profitable strategy for farmland owners in the future will be collaboration with contractors. Farms as organisations, are increasingly losing their importance. This not only has grave social implications for farmworkers and landowners but also for scholars in organisational behaviour research.

The paper challenges an organisational unit that is so familiar to us that it is rarely questioned.

The migration of physicians is a global interest, causing imbalances between developed and developing countries. Romania is one of Europe's major providers of physicians, not because there is a surplus, but because physicians are drawn to places with better living and working conditions. Medicine in Romania is increasingly highly advanced, and Romanian physicians are well appreciated all over the world. Despite being one of the countries with the most medical graduates in the world, Romania is suffering a doctor exodus. After joining the EU, the problem of physician migration became widespread, resulting in a deficient and inefficient healthcare system. Therefore, the purpose of this study is to estimate the losses registered by Romania because of physicians' decision to migrate.

These losses were calculated in two ways: utilizing the statistical life value and the amount of money invested in training a medical graduate.

According to the findings, the losses in 2018 were 104.16 million euros, approximately 0.12% of GDP.

The originality of this paper consists in data, being provided by the College of Physicians from Romania and the method used, this study being the only one that estimates the cost of Romanian physicians' migration. The paper adds to existing knowledge an empirical results regarding quantifying the value reflecting the departure of physicians, using value of statistical life and the amount of money invested in preparing a medical graduate.

This paper aims to answer these questions: “Is the public adopting energy-saving and water-saving facilities because they want to save energy and water in their psychological perception?”, “Is it convenient to use energy-saving and water-saving facilities?”, “If the inductive design of energy-saving and water-saving facilities attracts the public’s interest, the public is it more willing to install energy-saving and water-saving facilities in a widespread manner?” and “Can inductive energy-saving and water-saving facilities be introduced into the smart manufacturing system of manufacturing industries that require a lot of water to effectively save water and save costs for the company?”.

This paper aims to investigate the attitudes of employees toward using energy-saving and water-saving facilities by constructing a questionnaire based on the ABC (Affect, Behavior, Cognition) model to survey the attitudes of employees from the Southern and Eastern of Taiwan and establishing a structural equation modeling (SEM) to examine the relationship between affect, behavior and cognition while using energy-saving and water-saving facilities.

There are some findings in this paper that the affective design have a strongly significant positive impact for using energy-saving and water-saving facility in the proposed model. People are willing to use energy-saving and water-saving facilities but are more willing to adopt those energy-saving and water-saving products of smart designs, as those take into account the emotional factors. The critical factor for the public to adopt energy-saving and water-saving facilities is smart design, which incorporates emotional elements.

There are still some limitations of this study that the ABC model can only be used as a psychological discussion, and the development and design of related facilities still needs to be jointly developed with professionals in related technical fields. The introduction of induction water supply facilities needs to be considered while the company introduces the design of the smart manufacturing system. Therefore, professionals related to induction water supply should participate in the planning at the initial stage of the company's concept of introducing the smart manufacturing system.

On the practical side, based on preliminary research conclusions, this study proposes to introduce inductive water supply into smart manufacturing systems for manufacturing companies that require a lot of water in their manufacturing processes. In practice, the company can actually save a lot of water, thereby saving costs and reducing waste water discharge.

The results of this study show that the public has a cognition of energy-saving and water-saving. However, there is a Chinese proverb that “easy to know and hard to do”, when actually using facilities, convenience is an important consideration for public. Smart facilities of energy-saving and water-saving, in addition to the benefits of energy-saving and water-saving, it is easy to use, and interacts with users through inductive water supply, which can more emotionally attract people's willingness to use.

This study found that smart facilities, which can more emotionally attract people's willingness to use. On the academic side, this study proves that using the ABC theory to explore the public’s psychological affective, behavior and cognition response to the use of facilities is a very suitable method. On the practical side, based on preliminary research conclusions, this study proposes to introduce inductive water supply into smart manufacturing systems for manufacturing companies that require a lot of water in their manufacturing processes. In practice, the company can actually save a lot of water, thereby saving costs and reducing waste water discharge.

This study aims to assess the facilities management (FM) strategies used in multi-tenanted purpose-built office buildings (Mt-POBs) in Ghana and the drivers that influence the decision to use such strategies.

This study was conducted via a survey and key informant interviews. The survey was conducted using a questionnaire targeted at 65 multi-tenanted office building owners in the Greater Accra region. The data from the survey revealed the views of building owners on FM strategy and the extent to which 20 facility management decision drivers influenced their decisions to use a particular strategy and the responses were descriptively analysed. The key informant interviews were conducted among six leaders of the property owners’ association who use in-house FM to further understand their perspectives and decisions on using such strategy. The interviews were conducted over telephone using an interview guide and analysed using thematic analysis.

The results showed that 88% of Mt-POBs in Ghana are managed in-house. The results also showed that the decision to use the in-house strategy was driven by the innovative, strategic and cost-saving advantages associated with the in-house strategy.

This study shows the factors that drive the decision of multi-tenanted office building owners in Ghana to use the in-house strategy. The findings of this study will be useful for prospective owners of office buildings in Ghana.

Online food delivery applications (OFDAs) provide an expedient platform, and consumers’ access to food has been drastically altered, especially during and after the COVID-19 pandemic. This study aimed to completely explore the attributes that influence consumers' purchase intention and how an app's aesthetics can evoke feelings that predict continuous usage intentions for OFDAs. The food industry, especially restaurants, heavily relies on mobile technology to facilitate critical online food delivery during the pandemic crisis.

The data for this study are gathered from 477 food consumers located in the federal capital territory (FCT) of Islamabad, Pakistan, through convenient sampling by developing a self-administrated online survey. SmartPLS is used for structural equation modeling to test the proposed research model and perform bootstrapping and algorithmic analysis.

Our findings revealed that perceived value positively predicted consumers’ purchase intentions. Moreover, perceived value mediates the association of information quality, familiarity, time-saving, usability and reputation with purchase intentions and fear of COVID-19 moderates the relationship between perceived value and purchase intention.

This research work has significant implications for researchers, web developers, app designers, delivery services, restaurants and other enterprises as it demonstrates the importance of aesthetically pleasing OFDAs in eliciting positive emotions and bolstering consumers’ intentions to continue using the app for efficient food delivery services.

This study expanded the application of the technology acceptance model (TAM) and attention, interest, desire and action (AIDA) by examining consumers’ purchase intentions in the context of OFDAs. Further, the successful utilization of TAM enhanced the understanding of consumer perceptions and behavioral intentions about the usage of OFDAs.

Electric motor heating during biomass recovery and its handling on conveyor is a serious concern for the motor performance. Thus, the purpose of this paper is to design and develop a hardware prototype of master–slave electric motors based biomass conveyor system to use the motors under normal operating conditions without overheating.

The hardware prototype of the system used master–slave electric motors for embedded controller operated robotic arm to automatically replace conveyor motors by one another. A mixed signal based embedded controller (C8051F226DK), fully compliant with IEEE 1149.1 specifications, was used to operate the entire system. A precise temperature measurement of motor with the help of negative temperature coefficient sensor was possible due to the utilization of industry standard temperature controller (N76E003AT20). Also, a pulse width modulation based speed control was achieved for master–slave motors of biomass conveyor.

As compared to conventional energy based mains supply, the system is self-sufficient to extract more energy from solar supply with an energy increase of 11.38%. With respect to conventional energy based \ of 47.31%, solar energy based higher energy saving of 52.69% was reported. Also, the work achieved higher temperature reduction of 34.26% of the motor as compared to previous cooling options.

The proposed technique is free from air, liquid and phase-changing material based cooling materials. As a consequence, the work prevents the wastage of these materials and does not cause the risk of health hazards. Also, the motors are used with their original dimensions without facing any leakage problems.

This study aims to improve a construction company's overall project delivery by utilising lean six sigma (LSS) methods combined with building information modelling (BIM) to design, modularise and manufacture various building elements in a controlled factory environment off-site.

A case study in a construction company utilised lean six sigma (LSS) methodology and BIM to identify non-value add waste in the construction process and improve sustainability.

An Irish-based construction company manufacturing modular pipe racks for the pharmaceutical industry utilised LSS to optimise and standardise their off-site manufacturing (OSM) partners process and leverage BIM to design skids which could be manufactured offsite and transported easily with minimal on-site installation and rework required. Productivity was improved, waste was reduced, less energy was consumed, defects were reduced and the project schedule for completion was reduced.

The case study was carried out on one construction company and one construction product type. Further case studies would ensure more generalisability. However, the implementation was tested on a modular construction company, and the methods used indicate that the generic framework could be applied and customized to any offsite company.

This is one of the few studies on implementing offsite manufacturing (OSM) utilising LSS and BIM in an Irish construction company. The detailed quantitative benefits and cost savings calculations presented as well as the use of the LSM methods and BIM in designing an OSM process can be leveraged by other construction organisations to understand the benefits of OSM. This study can help demonstrate how LSS and BIM can aid the construction industry to be more environmentally friendly.

The purpose of this study is to develop a domain independent, cost-effective, time-saving and semi-automated ontology generation framework that could extract taxonomic concepts from unstructured text corpus. In the human disease domain, ontologies are found to be extremely useful for managing the diversity of technical expressions in favour of information retrieval objectives. The boundaries of these domains are expanding so fast that it is essential to continuously develop new ontologies or upgrade available ones.

This paper proposes a semi-automated approach that extracts entities/relations via text mining of scientific publications. Text mining-based ontology (TmbOnt)-named code is generated to assist a user in capturing, processing and establishing ontology elements. This code takes a pile of unstructured text files as input and projects them into high-valued entities or relations as output. As a semi-automated approach, a user supervises the process, filters meaningful predecessor/successor phrases and finalizes the demanded ontology-taxonomy. To verify the practical capabilities of the scheme, a case study was performed to drive glaucoma ontology-taxonomy. For this purpose, text files containing 10,000 records were collected from PubMed.

The proposed approach processed over 3.8 million tokenized terms of those records and yielded the resultant glaucoma ontology-taxonomy. Compared with two famous disease ontologies, TmbOnt-driven taxonomy demonstrated a 60%–100% coverage ratio against famous medical thesauruses and ontology taxonomies, such as Human Disease Ontology, Medical Subject Headings and National Cancer Institute Thesaurus, with an average of 70% additional terms recommended for ontology development.

According to the literature, the proposed scheme demonstrated novel capability in expanding the ontology-taxonomy structure with a semi-automated text mining approach, aiming for future fully-automated approaches.

The Central Bank of Nigeria (CBN) recently relaunched Nigeria’s cashless policy initiative which seeks to reduce financial crime and tax avoidance, decrease cash dependency, advance the adoption of digital financial services (DFS), decrease the risks to the payment system and foster financial inclusion. This study aims to identify the unique challenges of going cashless in Nigeria, particularly in terms of infrastructural, exclusionary and cost implications of the policy on the average citizens.

The author applies a doctrinal research methodology to identify and reflect on key challenges of the cashless policy from the economic, regulatory and transactional perspectives.

The cashless policy initiative in Nigeria heralds value for financial integrity, financial policy regulation and user convenience. The mode of introduction, however, ushers in significant challenges and hardly considers Nigeria’s inadequate payment infrastructure, persistent financial exclusion, low levels of financial and digital literacy and capability, high cost of using DFS and pervasive proclivity for cash. As Nigerians adjust albeit inconveniently to the policy, the CBN can ameliorate the hardship by strengthening the payment infrastructure, particularly for digital payments, fostering consumer trust by safeguarding user funds and enabling consumer preferences.

Research materials include the national regulator’s policy documents and newspaper articles that have not been published in formal reports but non-the-less adequately mirror the policy intention of the CBN and the lived experiences of Nigerians.

This study identifies the practical steps and regulatory measures that the CBN can take to improve acceptance and meaningful and sustainable adoption of the cashless policy by the majority of Nigerians.

The recommendations that are proffered provide some rich insights to inform regulatory direction for the CBN to seamlessly phase-in the cashless policy and consequently drive down financial exclusion in Nigeria.

This study contributes to the policy discussion around the introduction of the cashless Nigeria project. The doctrinal research method highlights the policy intentions of the regulator in juxtaposition with lived experiences of Nigerians. This study offers recommendations to bolster financial inclusion, stability and integrity.

In this paper, the authors examine the strategies used to reduce labour costs in three public hospitals in South Africa, which were effective and why. In the democratic era, after the revelations of large-scale corruption, the authors ask whether their case studies provide lessons for how public service institutions might re-make themselves, under circumstances of austerity.

A comparative qualitative case study approach, collecting data using a combination of interviews with managers, focus group discussions and interviews with shop stewards and staff was used.

Management in two hospitals relied on their financial power, divisions between unions and employees' loyalty. They lacked the insight to manage different actors, and their efforts to outsource services and draw on the Extended Public Works Program failed. They failed to support staff when working beyond their scope of practice, reducing employees' willingness to take on extra responsibilities. In the remaining hospital, while previous management had been removed due to protests by the unions, the new CEO provided stability and union–management relations were collaborative. Her legitimate power enabled unions and management to agree on appropriate cost cutting strategies.

Finding an appropriate balance between the new reality of reduced financial resources and the needs of staff and patients, requires competent unions and management, transparency and trust to develop legitimate power; managing in an authoritarian manner, without legitimate power, reduces organisational capacity. Ensuring a fair and orderly process to replace ineffective management is key, while South Africa grows cohorts of competent managers and builds managerial experience.