Search results

Supply chain (SC) configuration has gained increased acceptance as an important issue when evaluating new customization possibilities and this evidence has contributed to the strengthening of the debate between global vs local production locations. This work contributes in enrichment of this topic by studying how local or global SC location decisions influence performances by considering a SC point of view, in terms of cost and time, in traditional and customized productions.

A discrete event simulation approach, based on experimentation through executable configurations, was used to evaluate different SC scenarios for customized as well as traditional products within the footwear industry.

The results indicated that to identify proper SC locations, existing trade-offs between the time and cost performances should be studied, avoiding the evaluation of a single performance independently and, instead, adopting a complete SC point of view while considering these performances.

This evidence has contributed to the reinforcement of the discussion between far-shore destinations vs near-shore production locations. Further studies are encouraged to adopt the present model, in which addition of other variables such as specific manufacturing competences to differentiate suppliers, both local and global suppliers, or the possibility of realizing special types of product customization required by final consumers can be done.

The paper contributes to the academic and practitioners' debate by proposing a systemic approach to assess SCs’ performances in customized contexts and to compare them to traditional collections. Results indicate that cost and time performance must find a balance that does not necessarily correspond to an exclusively local or global production.

This work contributes to the SC configuration issue by considering the trade-off between efficiency and effectiveness (i.e. SC costs and SC times) for customized productions by reviving and enriching it with an SC perspective in customization contexts.

The purpose of this paper is to improve the appreciation of the moderating role of competitive intensity on the relationship between low-cost strategy and firm performance of restaurants.

The study uses empirical data collected from 118 restaurants operators, Ghana. The effects of relationships and the interaction of low-cost strategy and competitive intensity were tested using regression analysis.

The findings indicate the existence of a significant positive relationship between low-cost strategy and firm performance. The effect of competitive strategy on firm performance was found to be partially significant. The findings revealed that competitive intensity does moderate the relationship between low-cost strategy and firm performance of restaurants.

Implications of the findings for restaurant operators suggest that effective application of low-cost strategy and monitoring and managing competitive intensity results in high performance.

This study contributes to the existing literature on low-cost strategy, competitive intensity and firm performance. More specifically, the interaction terms of low-cost strategy and competitive intensity have been explored in this study and can be used for further investigations.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

The purpose of this research is to explore the effects of supplier selection method on key procurement outcomes such as procurement lead time (PLT), supplier performance and buyer team size.

Data were collected from a sample of 124 archival contract records from the US Department of Defense. A multiple regression model and multivariate analysis of covariance/analysis of covariance models were used to test the effects of source selection method on pertinent procurement outcomes.

The trade-off (TO) source selection method increases PLT, as does the number of evaluation factors and the number of proposals received. Substantially larger sourcing teams are also associated with the TO source selection method. Nonetheless, the TO method results in better supplier performance.

TO source selections yield superior supplier performance than low-bidder methods. However, they are costly in terms of time and personnel. Any assessment of supplier value should consider not only the price premium for higher performance but also the transaction costs associated with the TO method.

Very little research addresses a buying team’s evaluation of supplier-offered value ex ante and whether that value assessment materializes into actual value-added supplier performance. Low bidder tactics are pervasive, but price (i.e. sacrifice) is only one component of value. Benefits from superior supplier performance may yield greater overall value. If value is critical to the buyer, a TO source selection method – versus a low-bidder approach – is the appropriate tool because of higher supplier performance ex post.

There are three aims of this research. One is to verify the mutual effects between internal collaboration and external collaboration, another is to prove performance improvement among different levels of supply chain collaboration, and the third is to analyze gaps between the two viewpoints. The population is Korean FDI firms in China and 208 data are used in the analysis. The data are treated with various methods: exploratory and confirmatory factor analyses, SEM, cluster analysis, ANOVA, MANOVA and post hoc analysis. The results are as follows. First, external collaboration and internal collaboration have positive effects on each other, which have a positive effect on performance. This means that efficiency of internal processes is the cause of promoting connection with external processes and information generated from the market is the basis of a variance of internal processes, followed by high performance. Second, service performance improvement is more definite than cost performance improvement among different levels of supply chain collaboration. Firms can achieve more definite results in service performance when they perform supply chain collaboration. Third, this research verifies both the viewpoint of directions of supply chain collaboration and the strategic choice viewpoint of supply chain collaboration to better understand supply chain collaboration. Both viewpoints approach supply chain collaboration from different viewpoints but they do explain the methods for performance improvement.

The purpose of this paper is to report on research into the impact of two sequential dimensions of strategic purchasing – purchasing recognition and purchasing involvement – on the development and deployment of dynamic capabilities. The authors also examine how such dynamic capabilities impact on both cost and innovation performance, and how their effects differ for service as opposed to manufacturing firms.

The authors test hypotheses using structural equation modeling of survey data from 309 manufacturing and service firms.

From a dynamic capability perspective, the analysis supports the positive relationships between purchasing recognition, purchasing involvement, and dynamic capability in the form of knowledge scanning. The authors also find support for the positive impact of knowledge scanning on both cost and innovation performance. From a contingency perspective, data supports hypothesized differences caused by industry, whereby service-based firms experience stronger positive linkages in our model than manufacturing-based firms. Finally, emerging from the data, the authors explore a re-enforcing effect from cost performance to purchasing involvement, something that is in line with the dynamic capabilities perspective but not typically addressed in operations management (OM) research.

The research offers a number of theoretical and managerial contributions, including being one of a relative few examples of empirical assessment of dynamic capability development and deployment; examining the enablers of dynamic capability in addition to the more commonly addressed performance effect; assessing the contingency effect of firm type for dynamic capabilities; and uncovering a return (re-enforcing) effect between performance and enablers of dynamic capabilities.

The purpose of this paper is to show how data analytics can be used to identify areas of potential cost savings for category managers of installation-level services. Using integrated solid waste management (ISWM) as a test case, the authors also examine the impact of small business set-asides on price and contractor performance.

The authors use data analytics, specifically sequential regression, the Wilcoxon rank-sum test and ordered logistic regression to investigate the influence of service- and contracting-related variables on price and contractor performance.

The authors find that service- and contracting-related variables influence price. Specifically, they identify that a service-related variable, number of containers, significantly affects price, and that two contracting-related variables, one type of small business set-aside and the number of offers received, also significantly affect price. The authors quantify the price premiums paid for using various types of small business set-asides.

Although the findings were significant, the authors believe that the robustness of the conclusions could be enhanced if the Air Force captured more data. Additional observations would increase the generalizability of the results.

This empirical experiment demonstrates that detailed analyses are required to gain insights into services’ price drivers to craft more appropriate category management strategies for installation-level services.

This empirical study shows how historical data can be used to assess price drivers of installation-level services. It is also one of the first to quantify the impact that small business set-asides have on price.

Drawing on information processing theory, the linkage between buffering and bridging and the ability on the part of procurement to resolve demand–supply imbalances is investigated, as well as contexts in which these strategies may be particularly useful or detrimental. Buffering may be achieved through demand change or redundancy, while bridging may be achieved by the means of collaboration or monitoring.

This study employs a hierarchical regression analysis of a survey of 150 Finnish and Swedish procurement and sales and operations planning professionals, each responding from the perspective of their own area of supply responsibility.

Both the demand change and redundancy varieties of buffering are associated with procurement's ability to resolve demand–supply imbalances without delivery disruptions, but not with cost-efficient resolution. Bridging is associated with the cost-efficient resolution of imbalances: while collaboration offers benefits, monitoring seems to make things worse. Dynamism diminishes, while the co-management of procurement in S&OP improves procurement's ability to resolve demand–supply imbalances. The most potent strategy for tackling problematic contexts appears to be buffering via demand change.

The results highlight the importance of procurement in the S&OP process and suggest tactical measures that can be taken to resolve and reduce the effects of supply and demand imbalances.

The results contribute to the procurement and S&OP literature by increasing knowledge regarding the role and integration of procurement to the crucial process of balancing demand and supply operations.

The rate of project failure across the globe seems to reinforce poor performance as a norm. However, engagement with construction digitalisation (CD) represents a departure point for improving project performance. Amidst researchers' recent empirical engagement with CD, the knowledge of the relationship model between CD and project delivery (PD) is abysmal. As a result, developing a business case for CD in developing countries has been slow due to the dearth of empirical evidence. This paper aims to investigate the influence of digitalisation on project performance.

Anchored on cross-sectional survey research design using a questionnaire survey in which a total of 183 copies of structured questionnaires were randomly distributed to medium- and large-sized construction firms operating in Abuja, Nigeria's federal capital. A total of 126 valid responses were received giving an overall response rate of 68.8%. The responses were analysed using mean item score, principal component analysis and multiple linear regression.

Findings from the regression analysis reveal that digitalisation has varying levels of impact on PP measured using quality, time and cost. The relationship model with time performance is weak (r = 0.526, r² = 0.277); on cost performance, the significant model is also weak (r = 0.502, r² = 0.252) and moderate on quality (r = 0.663, r² = 0.439). CD influences project cost, time and quality performance despite the weak relationship model. The results indicate that the most effective benchmark of CD is quality performance.

This study established the relationship between digitalisation and construction PD within the construction industry context, an area lacking research attention in emerging economies. This study is the first study in emerging economies that established the influence of digitalisation on construction PD statistically.

This paper aims to identify the impacts of wire and arc additive manufacturing (WAAM) technology on the green supply chain management (GSCM) performance. Also, it intends to identify the most essential WAAM capabilities.

An exploratory case study related to a metallurgical company using WAAM technology to repair metallic components was developed. A research framework to identify WAAM production capabilities and the different GSCM performance criteria was proposed based on the current state of the art. Primary qualitative data provided evidence for developing seven propositions relating WAAM capabilities to GSCM performance.

The paper provides empirical evidence relating to how WAAM production capabilities impact the different performance criteria of the GSCM performance. The results show that “relative advantage” and “supply-side benefits” are critical capabilities developed through WAAM. Furthermore, most of the capabilities regarding “relative advantage” and “supply-side benefits” promote a higher GSCM performance.

This research was carried out using a single case study research design and using qualitative data. Thus, future works are encouraged to test the propositions empirically using quantitative methodologies.

The case study findings support that most WAAM production capabilities promote a higher GSCM performance. Managers could use this research to understand the capabilities developed by this fusion-based additive manufacturing (AM), become aware of the implications of new technology adoption on the supply chain environmental externalities, and develop new business models based on the WAAM capabilities.

This research contributes to expanding the state-of-the art related to WAAM technology by evidencing the relationship between adopting this fusion-based AM technology and green supply chain practices. Also, it provides a set of seven propositions that could be used to theorise the impacts of WAAM adoption on the GSCM performance.