Search results

The purpose of the study was to discover whether incorporating flours with high nutritive value along with pre-treatment of cereals with nixtamalization and sprouting of legumes would result in a high-quality healthy alternative for corn-based snacks.

Flours of nixtamalized cereals-corn, wheat, rice and sorghum and sprouted legumes-soybean and green gram are made into dough and baked instead of fried to form multi-grain chips. The particle size and physical properties of flour and nutritional, functional and textural properties of dough and chips are tested to study the effect of combination of nixtamalization of cereals and sprouting of legumes in the development of chips.

Baked multi-grain chips made of nixtamalized cereals and sprouted legumes had a significantly (p < 0.05) smaller particle size of 24.6 µm compared to T1 24.8 µm, C1 29.3 µm and C2 31.7 µm. T2 and C2 had significantly (p = 0.05) lower OAC value than C1 and T1 due to nixtamalization as nixtamalized flour needed half the amount of oil during dough formation. T1 showed highest calcium (mg/100 g) of 466 which was significantly (p < 0.05) higher than all other groups. The overall acceptability of T2 (8.6) was significantly (p < 0.05) higher than T1 (7.8), C2 (7.4) and C1 (6.8) on the nine-point Hedonic scale.

The developed chips are superior in terms of higher protein and minerals with better organoleptic acceptability and lower fat content in comparison to both corn chips and nixtamalized corn chips. The multi-grain chip therefore offers a new option for the consumer in high-quality healthy alternative to corn-based fried snacks.

Celiac disease patients cannot consume gluten-containing diets; thus, gluten-free products should be offered to meet the nutritional needs of these patients. The purpose of this study was to produce gluten-free tarhana for celiac disease patients using corn flour instead of wheat flour and investigate some physicochemical properties of tarhana. Hydrocolloids were used to compensate for technological deficiencies caused by the absence of gluten.

Hydrocolloids including guar gum, xanthan gum and locust bean gum were added at concentrations of 0.5% and 1.0% to the corn flour. The substituted corn flour samples were used to produce tarhana powder.

The pH and acidity measurements were carried out in 0th, 24th and 48th h of fermentation, and for all samples, the pH gradually decreased during fermentation, whereas the acidity increased. According to the color measurements (L, a and b values), it was observed that there was no significant difference (p = 0.588) between the gums in terms of L values in tarhana dough samples. Water retention capacity values of control, guar gum 1%, xanthan gum 1% and locust bean gum 1% were found to be 1.1, 1.1, 0.7 and 1.2 mL/g, respectively. The viscosity measurements were carried out at three different temperatures (30°C, 45°C and 60°C), and the viscosity values were found to decrease significantly (p = 0.000) with the increase in temperature for all the samples studied. The highest viscosity values were obtained by 1.0% xanthan gum (4,333 mPa s) and 0.5% locust bean gum (3,575 mPa s) added tarhana samples for 3 rpm at 30°C. Xanthan gum addition showed the lowest foam capacity values (0.04 mL/mL) among the samples. The samples with guar gum, xanthan gum and locust bean gum are recommended with regard to consistency and foam stability in the production of tarhana.

This study confirms that the use of gums in tarhana, a gluten-free system, is beneficial for the technological aspect. The unfavorable properties that can be seen because of the absence of gluten in corn flour tarhana can be compensated with the use of hydrocolloids, and tarhana can be recommended to celiac disease patients.

The purpose of this study was to investigate the sensory properties and chemical composition of corn and sorghum flakes manufactured using 25, 50, 75 and 100 per cent date syrup (DS), instead of sugar.

Ten individuals assessed the overall acceptability, taste, texture and aroma of flakes. The chemical composition of each type of flake was determined, and these characteristics compared with those of control corn and sorghum flakes (without DS).

The overall acceptability of sorghum flakes ranged from 6.3 (100 per cent DS flakes) to 6.8 (25 per cent DS flakes); however, the difference was not significant. Values for taste, texture and aroma of sorghum flakes ranged from 5.3 (taste of 100 per cent DS flakes) to 7.2 (texture of 25 per cent DS flakes). For corn flakes, values ranged from 6.20 (aroma of 100 per cent DS flakes) to 7.20 (texture of 25 per cent DS flakes). For both sorghum and corn, the colors of 25-100 per cent DS flakes were significantly different from controls (p = 0.0002). The total carbohydrate, fat, protein and ash contents were 81.669 per cent, 1.545 per cent, 13.27 per cent and 3.52 per cent for corn flour, and 83.38-85.78 per cent, 1.7-2.0 per cent, 10.02-12.13 per cent and 2.36-3.92 per cent for sorghum flour, respectively. The total carbohydrate, fat, protein and ash contents were 81.63 per cent, 5.75 per cent, 9.80 per cent and 2.82 per cent for corn, and 86.31-84.99 per cent, 3.15-4.27 per cent, 7.64-7.94 per cent and 2.92-2.79 per cent for sorghum flakes, respectively.

Corn and sorghum flakes produced with DS are acceptable to consumers, and their nutrient values indicate potential health benefits.

This study aims to develop sweet chestnut incorporated corn-based extrudates by the optimization of process conditions.

The independent process variables for extrusion (blend ratio, barrel temperature, screw speed and feed moisture) were investigated to govern their impact on reliant variables, namely, bulk density, specific mechanical energy, water absorption index, water solubility index, color and hardness. Product and system responses were significantly (p < 0.05) affected by the independent variables. Experimental design with quadratic models experienced a high coefficient of determination (R² = 0.99).

Numerical optimization for the development of extrudates resulted in optimum conditions having corn flour: sweet chestnut flour (80:20), barrel temperature (120°C), screw speed (340 rpm) and feed moisture (12%). Fat, moisture and protein contents of the developed extrudates using optimum conditions were significantly (p < 0.05) lower compared to raw materials – corn and sweet chestnut. The packaging of extrudates in aluminum laminates revealed shelf stability of three months at room temperature without deterioration of quality.

Nutritionally rich sweet chestnut extruded products would be an exclusive option to already existing snacks in the market and can facilitate a new sphere in extruded product sector.

Certain daily papers have recently made a discovery of such importance that they have been compelled to deal with it in leading and special articles. From a report of the Local Government Board they appear to have just learned that the milk supply of the Metropolis is more adulterated than that of the provinces, and that the cost to the consumer—of water sold as milk in London alone—amounts to at least £30,000 sterling annually.

The purpose of this paper to standardize the technique for the development of potato flour and to incorporate it in development of the products along with defatted soy flour and maize flour. Also, effect of processing techniques like frying and fermentation on anti‐nutritional content of the products was studied.

The ingredients as well as developed products were analyzed for the macronutrients, viz protein, ash and fat. Also anti‐nutrients like phytic acid, saponin, polyphenols and trypsin inhibitors were estimated by employing standard techniques. Data thus obtained were subjected to analysis of variance according to standard method of statistical analysis.

Potato flour being a versatile ingredient can be easily incorporated in development of various products. Frying and fermentation resulted in decrease of anti‐nutritional factors.

These developed products could be instrumental in alleviating malnutrition as they have high nutritional value and are low in anti‐nutrients.

The present research was envisaged with an aim to optimize the system and the product responses for the development of tomato pomace-incorporated corn-based extrudates employing central composite rotatable design and determine its proximate, lycopene, consumer acceptability and storage studies.

Lycopene-rich extrudates were developed from corn flour blended with different levels of tomato pomace. The independent extrusion variables, namely, feed composition (95:5 to 75:25), feed moisture (12–20%), screw speed (200–600 rpm) and barrel temperature (125–185 °C), were studied to determine their influence on dependent variables, namely, specific mechanical energy, hardness, water solubility index, lateral expansion, water absorption index, bulk density and color.

All of the quality parameters were significantly (p < 0.05) influenced by independent variables. The regression models obtained for all the responses showed high coefficients of determination (R2 = 0.85–0.95). The optimum conditions for the development of tomato pomace-incorporated corn-based extrudates were feed composition (90:10), feed moisture (14%), screw speed (300 rpm) and barrel temperature (170 °C). The moisture, fat and carbohydrate contents of the extrudates were significantly reduced, whereas protein, ash and fiber were significantly (p < 0.05) enhanced after the incorporation of tomato pomace. Aluminum laminates were found to be the suitable packaging materials for extrudates for a period of 120 days in comparison to high-density polyethylene packages.

As far as the authors could possibly know, scanty literature exists wherein the tomato pomace has been utilized for the development of lycopene-rich corn-based extruded snacks. Such extrudates with significantly higher fiber and lycopene contents than corn flour will serve as a suitable alternative for the development of shelf-stable ready-to-eat extruded snacks.

Some misconception appears to have arisen in respect to the meaning of Section 11 of the Food and Drugs Act, 1899, owing, doubtless, to the faulty punctuation of certain copies of the Act, and the Sanitary Record has done good service by calling attention to the matter. The trouble has clearly been caused by the insertion of a comma after the word “condensed” in certain copies of the Act, and the non‐insertion of this comma in other copies. The words of the section, as printed by the Sanitary Record, are as follows: “Every tin or other receptacle containing condensed, separated or skimmed milk must bear a label clearly visible to the purchaser on which the words ‘Machine‐skimmed Milk,’ or ‘Skimmed Milk,’ as the case may require, are printed in large and legible type.”

The formulated proposals for this legal principle in the trade battern of the European Community have again appeared in the EEC draft Directive. It has been many years in coming, indicating the extreme difficulties encountered in bringing some sort of harmony in the different laws of Member‐states including those of the United Kingdom, relating to the subject. Over the years there were periods of what appeared to be complete inactivity, when no progress was being made, when consultations were at a stand‐still, but the situation was closely monitored by manufacturers of goods, including food and drink, in the UK and the BFJ published fairly detailed reviews of proposals being considered — in 1979 and 1981; and even as recently as the last few months — in “Consumerism in the Community”, the subject was briefly discussed.

The objective of this study was to evaluate the effects of rice flour obtained from rice grains with different levels of amylose on technological, nutritional and sensory properties of cookies made with a blend of rice and cowpea flour.

The cookies preparation was set at a ratio of rice flour and cowpea beans 70:30. The studied formulations were: LA: low amylose rice flour; MA: medium-amylose rice flour; HA: high amylose rice flour. The quality of the obtained cookies was analyzed for proximate composition, in vitro protein digestibility, thickness, diameter, dispersion factor, texture, color, amino acid profile and sensory properties.

Proximate composition and in vitro protein digestibility showed no differences between the three studied formulations. The medium and low amylose rice flour cookies showed the lowest hardness values. The combination of rice and beans allowed a good balance of essential amino acids. The cookies formulated with high amylose rice flour presented lighter coloration, low hardness and greater sensory preference.

Rice and cowpea flours are an alternative source for the preparation of gluten-free bakery products, such as cookies. The high amylose content of rice flour has less negative interference in the texture characteristics of the cookies. The combination of rice and beans flour provides a balance of essential amino acids.