Search results

1 – 10 of over 3000
Open Access
Article
Publication date: 29 February 2024

Guanchen Liu, Dongdong Xu, Zifu Shen, Hongjie Xu and Liang Ding

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous…

Abstract

Purpose

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Design/methodology/approach

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

Findings

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

Originality/value

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Details

Journal of Intelligent Manufacturing and Special Equipment, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2633-6596

Keywords

Article
Publication date: 1 March 2022

Monica Grace Maceli

This research seeks to better understand the potential uses of maker technologies, such as single-board computers and microcontrollers, more broadly within libraries and not…

Abstract

Purpose

This research seeks to better understand the potential uses of maker technologies, such as single-board computers and microcontrollers, more broadly within libraries and not simply confined to the makerspace. Through interviews with librarians creating such projects, this study illustrates their successes, challenges, means of acquiring the necessary skills and knowledge, as well as their perceptions of the broader benefits and challenges to other library and information science practitioners.

Design/methodology/approach

This research study employed semistructured interviews with 12 librarians who have created projects with maker technologies for broader library use. Inductive qualitative analysis of the interview transcripts was conducted to identify themes of interest to the stated research questions.

Findings

Librarians' projects included: displaying digital signage, hosting online public access catalog stations, tallying reference desk interactions, counting patrons at the gate and monitoring 3-D printing statistics, among others. Participants appreciated the low-cost, flexible and creative nature of such technologies, and though they also encountered technical and organizational challenges in their use, relayed a potential series of benefits to librarians and library staff were these technologies to be more widely used.

Originality/value

Although significant research efforts have focused on aspects of makerspaces across all types of libraries, little work has formally collected and assessed library practitioners' work with maker technologies outside of the makerspace. Participants help detail the potential benefits of having a deeper understanding of this work, and the successes it could bring to librarians' work.

Details

Library Hi Tech, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0737-8831

Keywords

Article
Publication date: 21 March 2023

Sujit K. Pradhan, Anil Kumar and Vijay Kumar

Recently, the popularity of software has grown significantly in the market. Enhancement of software is needed to decrease the burden of getting high-quality and reliable software…

Abstract

Purpose

Recently, the popularity of software has grown significantly in the market. Enhancement of software is needed to decrease the burden of getting high-quality and reliable software. To achieve this, the software is upgraded by adding new features to the previous version. Therefore, adding new features in the last version to be consistent with the earlier version is challenging. This paper aims to discuss the optimal software enhancement and customer growth model.

Design/methodology/approach

This paper discusses a model when new features are added to the software, and the customers' adoption of the software is presented as a customer growth model. An optimal control problem is introduced to maximize the profit obtained from the software system over the system's lifetime period. Total gain is calculated by the value generated from selling the software over the total expenditure during the software development process. The closed-form solution and some theoretical results are presented using the optimal control-theoretic approach. The theoretical results are supported by a numerical example.

Findings

This paper gives several substantive insights during sensitivity analysis and provides essential results. The results discussed here are compatible with the actual scenario and useful in software enhancement.

Originality/value

The authors have proposed a new feature growth and customer growth model to maximize the total profit using optimal control theory.

Details

International Journal of Quality & Reliability Management, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0265-671X

Keywords

Article
Publication date: 23 January 2023

Bruno Falcón Silveira and Dayana Bastos Costa

Several studies have addressed the use of four-dimensional (4D) building information modeling (BIM) for construction management. However, the automation of the processes for…

Abstract

Purpose

Several studies have addressed the use of four-dimensional (4D) building information modeling (BIM) for construction management. However, the automation of the processes for generating 4D models and their integrated use with Location-Based Planning and the Last Planner® System is not well discussed. Therefore, this paper aims to develop a method for automating the generation and use of 4D BIM models integrated with Location-Based Planning and Last Planner® System supporting project control cycles.

Design/methodology/approach

The research strategy adopted was Design Science Research. The automated method for using the 4D models was developed and refined in two residential building projects in Brazil, along with 31 meetings and involving 11 direct users. The assessment of the proposed method focuses on four constructs: the impact of process automation, the impact on the identification and assessment of site progress and the planning process, ease of adoption and utility of the proposed method.

Findings

The results of this paper indicated increased adherence between planned and executed through an automated method for using the 4D models. The established routines enabled automating the link between the planning levels and the three-dimensional (3D) model, providing a more agile and updated data source and achieving 92.8% of user satisfaction regarding the deadline and frequency of delivery of the 4D model reports. Moreover, this study identified the relationships between the processes of the method proposed and Digital Models.

Originality/value

The primary scientific value achieved in this study is creating a method for automating processes and simplifying steps for the generation and use of 4D BIM models in the production planning and control cycles during the construction phase.

Details

Construction Innovation , vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1471-4175

Keywords

Article
Publication date: 25 October 2022

Faiqa Mansoor, Kanwal Ameen and Alia Arshad

The role of academic libraries in dissemination of information and facilitating research of academic community is well-established world over. However, a significant role of…

Abstract

Purpose

The role of academic libraries in dissemination of information and facilitating research of academic community is well-established world over. However, a significant role of libraries in ensuring fair use of information to promote an ethical research culture at the higher education institutes is also flourishing. This study aims to explore the perceived causes of unethical use of literature by university scholars and deterrents to plagiarism in universities of Pakistan.

Design/methodology/approach

The design of the study was qualitative, and interviews were conducted on nine university library heads in Pakistan who were officially administrating anti-plagiarism (Turnitin) software service at their universities and were providing “similarity index certification” of PhD and MPhil research work through the software. They were purposively selected for the interviews because of their direct interaction with the researchers and faculty on matters of information searching as well as its ethical use. The study is based on PhD thesis work of the first author.

Findings

The findings of the study depicted that conceptual unawareness of plagiarism, lack of information skills, socio-cultural factors and weak policies were the prime reasons for unethical research practices among graduate scholars. Participants were positive that a role of university library in combating plagiarism through provision of anti-plagiarism software and guidance could prove more beneficial for both the researchers and libraries.

Originality/value

Multiple studies have been conducted, in and out of south Asian region, to gather the views of the students and faculty on the matters of academic misconduct. However, no study was found presenting the views of the other stakeholders in promotion of academic integrity. To the best of the authors’ knowledge, this study is first of its kind in South Asian context and provided observation-based views of a group of university library heads who are also administrating anti-plagiarism service in their universities on the causes and deterrents to plagiarism.

Details

Global Knowledge, Memory and Communication, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2514-9342

Keywords

Open Access
Article
Publication date: 23 February 2024

Yuliang Du

Auxiliary power system is an indispensable part of the train; the auxiliary systems of both electric locomotives and EMUs mainly are powered by one of the two ways, which are…

69

Abstract

Purpose

Auxiliary power system is an indispensable part of the train; the auxiliary systems of both electric locomotives and EMUs mainly are powered by one of the two ways, which are either from auxiliary windings of traction transformers or from DC-link voltage of traction converters. Powered by DC-link voltage of traction converters, the auxiliary systems were maintained of uninterruptable power supply with energy from electric braking. Meanwhile, powered by traction transformers, the auxiliary systems were always out of power while passing the neutral section of power supply grid and control system is powered by battery at this time.

Design/methodology/approach

Uninterrupted power supply of auxiliary power system powered by auxiliary winding of traction transformer was studied. Failure reasons why previous solutions cannot be realized are analyzed. An uninterruptable power supply scheme for the auxiliary systems powered by auxiliary windings of traction transformers is proposed in this paper. The validity of the proposed scheme is verified by simulation and experimental results and on-site operation of an upgraded HXD3C type locomotive. This scheme is attractive for upgrading practical locomotives with the auxiliary systems powered by auxiliary windings of traction transformers.

Findings

This scheme regenerates braking power supplied to auxiliary windings of traction transformers while a locomotive runs in the neutral section of the power supply grid. Control objectives of uninterrupted power supply technology are proposed, which are no overvoltage, no overcurrent and uninterrupted power supply.

Originality/value

The control strategies of the scheme ensure both overvoltage free and inrush current free when a locomotive enters or leaves the neutral section. Furthermore, this scheme is cost low by employing updated control strategy of software and add both the two current sensors and two connection wires of hardware.

Details

Railway Sciences, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2755-0907

Keywords

Article
Publication date: 18 March 2024

Shirley Jin Lin Chua, Shiuan Ping Beh, Nik Elyna Myeda and Azlan Shah Ali

This study aims to improve the use of digitalization in facilities management (FM) for shopping complex facilities in the post-COVID-19 era. The resumption of economic activities…

Abstract

Purpose

This study aims to improve the use of digitalization in facilities management (FM) for shopping complex facilities in the post-COVID-19 era. The resumption of economic activities, especially in shopping complexes, poses challenges for FM with throngs of shoppers. To tackle these challenges, enhanced and innovative FM practices are necessary.

Design/methodology/approach

The study used a qualitative research approach, incorporating case studies, interviews, observations and documentation. It focused on super-regional shopping complexes in the Klang Valley, Malaysia, selecting two complexes for qualitative data collection. Supplementary data were gathered from various sources, including government policy publications, websites, books, journal papers and archival records.

Findings

The research provides valuable insights into FM innovations and the application of FM digitalization in shopping complexes after the COVID-19 pandemic. It also addresses challenges faced by FM teams during this period. Recommendations for implementing FM digitalization in super-regional shopping complexes post-COVID-19 include developing skilled personnel, defining appropriate work scopes, strategies and policies, using cost-effective software, and increasing occupant awareness. The involvement of outsourced service providers is advised, emphasizing their understanding of the organization’s business model and innovative approaches.

Originality/value

The findings offer new perspectives on the characteristics of FM digitalization in the commercial sector during business disruptions caused by the pandemic. The proposed strategies are grounded in real industry implementations, aiming to enhance the FM digitalization approach for improved business performance.

Details

Facilities , vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0263-2772

Keywords

Open Access
Article
Publication date: 22 February 2024

Ia Williamsson and Linda Askenäs

This study aims to understand how practitioners use their insights in software development models to share experiences within and between organizations.

Abstract

Purpose

This study aims to understand how practitioners use their insights in software development models to share experiences within and between organizations.

Design/methodology/approach

This is a qualitative study of practitioners in software development projects, in large-, medium- or small-size businesses. It analyzes interview material in three-step iterations to understand reflexive practice when using software development models.

Findings

The study shows how work processes are based on team members’ experiences and common views. This study highlights the challenges of organizational learning in system development projects. Current practice is unreflective, habitual and lacks systematic ways to address recurring problems and share information within and between organizations. Learning is episodic and sporadic. Knowledge from previous experience is individual not organizational.

Originality/value

Software development teams and organizations tend to learn about, and adopt, software development models episodically. This research expands understanding of how organizational learning takes place within and between organizations with practitioners who participate in teams. Learnings show the potential for further research to determine how new curriculums might be formed for teaching software development model improvements.

Details

The Learning Organization, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0969-6474

Keywords

Article
Publication date: 5 April 2022

Zhimin Pan, Yu Yan, Yizhou Huang, Wei Jiang, Gao Cheng Ye and Hong Jun Li

The purpose of this paper is to achieve optimal climbing control of the gas-insulated switchgear (GIS) robot, as the authors know that the GIS inspection robot is a kind of…

Abstract

Purpose

The purpose of this paper is to achieve optimal climbing control of the gas-insulated switchgear (GIS) robot, as the authors know that the GIS inspection robot is a kind of artificial intelligent mobile equipment which auxiliary or even substitute human labor drive on the inner wall of the gas-insulated metal enclosed switchgear. The GIS equipment fault inspection and maintenance can be realized through the robot manipulator on the mobile platform and the camera carried on the fuselage, and it is a kind of intelligent equipment for operation. To realize the inspection and operation of the GIS equipment pipeline without blind spots, the robot is required to be able to travel on any wall inside the pipeline, especially the top of the pipeline and both right and left sides of the pipeline, which requires the flexible climbing of the GIS inspection robot. The robot device has a certain adsorption function to ensure that the robot is fully attached to the wall surface. At the same time, the robot manipulator can be used for collision-free obstacle avoidance operation planning in the narrow operation space inside the GIS equipment.

Design/methodology/approach

The above two technologies are the key that the robot completes the GIS equipment inspections. Based on this, this paper focuses on modeling and analysis of the chassis adsorption characteristics for the GIS inspection robot. At the same time, the Denavit Hartenberg (D-H) coordinate model of the robot arm system has been established, and the kinematics forward and inverse solutions of the robot manipulator system have been derived.

Findings

The reachable working space point cloud diagram of the robot manipulator in MATLAB has been obtained based on the kinematics analysis, and the operation trajectory planning of the robot manipulator using the robot toolbox has been obtained. The simulation results show that the robot manipulator system can realize the movement without collision and obstacle avoidance. The space can cover the entire GIS pipeline so as to achieve no blind area operation.

Originality/value

Finally, the GIS inspection robot physical prototype system has been developed through system integration design, and the inspection, maintenance operation experiment has been carried out in the actual GIS equipment. The entire robot system can complete the GIS equipment inspection operation soundly and improve the operation efficiency. The research in this paper has important theoretical significance and practical application value for the optimization design and practical research of the GIS inspection robot system.

Details

Industrial Robot: the international journal of robotics research and application, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0143-991X

Keywords

Article
Publication date: 24 May 2023

Meysam Soltaninejad, Esmatullah Noorzai and Amir Faraji

This research aims to provide optimization and route safety planning employing the fuzzy Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) technique.

Abstract

Purpose

This research aims to provide optimization and route safety planning employing the fuzzy Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) technique.

Design/methodology/approach

This research combines the use of graphical, communication tools and simulated models based on building information modeling (BIM) technology and agent-based modeling (ABM) to identify a safe evacuation route. Adopting the multi-criteria decision-making (MCDM) approach, the proposed rescue plan can reduce potential hazards along the evacuation route by selecting a safe route for evacuating residents and entering firefighters to the scene of the incident.

Findings

The results show that the use of simulated models along with MCDM methods in the selection of safe routes improves the performance of safe evacuation operations for both relief groups and residents.

Practical implications

The introduced model can improve the performance management of different groups at the time of the incident and reduce casualties and property losses using the information received from sensors at the scene. Moreover, the proposed rescue plan prevents group and individual reactivation at the time of the incident.

Originality/value

Despite many advances in the architecture, engineering and construction (AEC) industry, the number of victims of fire incidents in buildings is increasing compared to other natural disasters. Improving decision management based on effective parameters at the time of incident reduces casualties of residents and rescue workers.

Details

Smart and Sustainable Built Environment, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2046-6099

Keywords

1 – 10 of over 3000