Search results

Petroleum hydrocarbons are naturally occurring flammable fossil fuels used as conventional energy sources. It has carcinogenic, mutagenic properties and is considered a hazardous pollutant. Soil contaminated with petroleum hydrocarbons adversely affects the properties of soil. This paper aim to remove pollutants from the environment is an urgent need of the hour to maintain the proper functioning of soil ecosystems.

The ability of micro-organisms to degrade petroleum hydrocarbons makes it possible to use these microorganisms to clean the environment from petroleum pollution. For preparing this review, research papers and review articles related to petroleum hydrocarbons degradation by micro-organisms were collected from journals and various search engines.

Various physical and chemical methods are used for remediation of petroleum hydrocarbons contaminants. However, these methods have several disadvantages. This paper will discuss a novel understanding of petroleum hydrocarbons degradation and how micro-organisms help in petroleum-contaminated soil restoration. Bioremediation is recognized as the most environment-friendly technique for remediation. The research studies demonstrated that bacterial consortium have high biodegradation rate of petroleum hydrocarbons ranging from 83% to 89%.

Proper management of petroleum hydrocarbons pollutants from the environment is necessary because of their toxicity effects on human and environmental health.

This paper discussed novel mechanisms adopted by bacteria for biodegradation of petroleum hydrocarbons, aerobic and anaerobic biodegradation pathways, genes and enzymes involved in petroleum hydrocarbons biodegradation.

Lead is a well-established environmental contaminant that over the last 50 years has become recognized as a neurotoxin with its greatest concern for the developing child (i.e. both in-utero and postnatally). What is problematic is that children exposed to lead often come from lower socioeconomic status (SES), are largely Black communities and are further at increased risk for developing adverse childhood experiences (ACEs). The literature on ACEs had focused much on trauma, single parenting, child abuse, lack of finances and stress, etc., but has not considered the intersectionality of these ACEs as risk factors within environmental neurotoxic exposures such as lead poisoning. This is important as most low SES communities are Black. In particular, within the New York City Housing Authority (NYCHA), Black families have been neglected of proper lead-abatement to their apartments for nearly 70 years.

This is a viewpoint/perspective paper that examines the lived experiences of Black folxs in NYCHA through a Black critical theory (BlackCrit) and antiblackness framework pertaining to ACEs, and lead poisoning within the NYCHA system of New York City. This perspective paper draws upon the last three years of news reports, five decades of publicly available data sets from NYCHA and the comptroller to raise an awareness of how Black children are treated by NYCHA generation after generation which can be argued as a mass atrocity against NYCHA residents. Furthermore, the systematic and institutionalized racism and environmental injustices by NYCHA and the state can also be considered as a crime against humanity. As such, BlackCrit could help to position awareness, advocacy and knowledge about Black folxs residing in NYCHA to achieve fair, safe and affordable public housing to experience Black joy across future generations.

Thus, rather than civic and state government response efforts focusing their full attention and resources to serving and supporting individuals affected by ACEs they should equally consider the environments in which Black people live and also allocate funds proportionally to address these areas often overlooked. Moreover, proportions of these funds should be redirected especially to lead-abatement and removal of known sources of lead exposures, evaluation of suspected sources of lead exposures (i.e. drinking water, baby food and formula, children’s juice and cereal products, superfund and other waste sites, electronic recycling plants, etc.) and accompanied by all affected children undergoing full and comprehensive neuropsychological testing and follow up studies paid for by the state. The goal should have two fundamental objectives: (1) accepting accountability for failing to address these preventable neuropsychological issues directly affecting Black children generation after generation and (2) offering the proper waived or reimbursable supports and resources to help Black children sustain the best quality of life (QOL) trajectory possible when diagnosed with lead poisoning.

The manuscript is a viewpoint/perspective paper grounded in BlackCrit and an antiblackness framework. There are ample public news reports and public data available from NYCHA on these matters over the last three years. However, the scope of this paper was not to delve too deep into these numbers per se, but rather to address the concerns leading up to and arguably contributing to, at least in part, to these numbers of lead-exposed Black children in NYCHA. Lead poisoning has never been considered as an ACE and its relationship to mass atrocity research is novel which may pave a new avenue for research of this kind through the utility of BlackCrit and antiblackness framework to support and advocate for change so that Black children can be provided with a basic human right of safe housing and experience Black joy.

BlackCrit has not been used in the context of lead poisoning research. Mostly individuals and families of middle- and low-income have been studied in the context of poverty and lead poisoning. However, many people who live in poverty, in public housing, within New York are Black. Thus, Black children are generation after generation exposed to unaddressed lead-abatement and it appears that now more than ever BlackCrit should become the framework for how this work should be discussed in the literature to raise awareness to state governments regarding Black folx's persistent lead poisoning, NYCHA's neglect and mass atrocity research as a long overdue advocacy effort to bring the necessary voice, authentic narrative, and actual knowledge of the lived experiences of Black families in NYCHA with lead poisoning.

The goal of this viewpoint/perspective paper should have two fundamental objectives (1) NYCHA and New York State accepting accountability for failing to address these preventable lead poisoning issues directly affecting Black children; and (2) offering the proper support and resources to help Black children sustain the best QOL trajectory possible when diagnosed with lead poisoning.

Lead poisoning research has never been approached through a mass atrocity and BlackCrit framework and perspective. This is the first report on bridging these fields within the context of NYCHA public housing neglect of lead-abatement and continued poisoning of current and future generations of Black children. This failure of NYCHA lead-abatement contributes annually to economic loss in New York State for many years to come which could be entirely avoided.

The main purpose of this paper was to evaluate the validation process of food safety control measures.

The validation of control measures has been analyzed at 50 food companies in Serbia. The sample included companies that produce food of both plant and animal origin and have certified food safety management systems. A total of 156 control measures that combat physical hazards (41.6%), followed by microbial hazards (34.0%) and chemical hazards (24.4%), have been analyzed. To enable quantification of the validation protocols, each control measure was assigned a score.

The validation scores showed that the highest level of validation was observed in large companies, as opposed to small and medium-sized companies (p < 0.05). The type of food safety hazards and the food sector did not reveal any statistical differences in-between the scores. The main approach to validating control measures was referring to the technical documentation of equipment used (52.6%), followed by scientific and legal requirements (30.7%). Less than 20% of the analyzed control measures were validated with operational data collected on-site. No mathematical modeling was observed for the sampled food companies. Future steps should include the development of validation guides for different types of control measures and training modules.

This study can serve as an improvement guide for food safety consultants, food safety auditors, certification bodies, inspection services, food technologists and food managers.

This study is one of the first to provide an insight into how food companies validate their control measures to combat microbial, chemical and physical food safety hazards.

This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device.

2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope.

The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the “rainbow ring” cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 µm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity.

Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.

Intense interest has been shown in creating new and effective biocide agents as a result of changes in bacterial isolates, bacterial susceptibility to antibiotics, an increase in patients with burns and wounds and the difficulty of treating infections and antimicrobial resistance. Woven, nonwoven and knitted materials are used to make dressings; however, nonwoven dressings are becoming more popular because of their softness and high absorption capacity. Additionally, textiles have excellent geometrical, physical and mechanical features including three-dimensional structure availability, air, vapor and liquid permeability, strength, extensibility, flexibility and diversity of fiber length, fineness and cross-sectional shapes. It is necessary to treat every burn according to international protocol and along with it has to focus on particular problems of patients and the best possible results.

The objective of this paper is to conduct a thorough examination of research pertaining to the utilization of textiles, as well as alternative materials and innovative techniques, in the context of burn wound dressings. Through a critical analysis of the findings, this study intends to provide valuable insights that can inform and guide future research endeavors in this field.

In the past years, there have been several dressings such as xeroform petrolatum gauze, silver-impregnated dressings, biological dressings, hydrocolloid dressings, polyurethane film dressings, silicon-coated nylon dressings, dressings for biosynthetic skin substitutes, hydrogel dressings, newly developed dressings, scaffold bandages, Sorbalgon wound dressing, negative pressure therapy, enzymatic debridement and high-pressure water irrigation developed for the fast healing of burn wounds.

This research conducts a thorough analysis of the role of textiles in modern burn wound dressings.

Heating, ventilating, air-conditioning and cooling (HVAC) systems are crucial in daily health-care facility services. Design-related defects can lead to maintenance issues, causing service disruptions and cost overruns. These defects can be avoided if a link between the early design stages and maintenance feedback is established. This study aims to use experts’ experience in HVAC maintenance in health-care facilities to list and evaluate the risk of each maintenance issue caused by a design defect, supported by the literature.

Following semistructured interviews with experts, 41 maintenance issues were identified as the most encountered issues. Subsequently, a survey was conducted in which 44 participants evaluated the probability and impact of each design-caused issue.

Chillers were identified as the HVAC components most prone to design defects and cost impact. However, air distribution ducts and air handling units are the most critical HVAC components for maintaining healthy conditions inside health-care facilities.

The unavailability of comprehensive data on the cost impacts of all design-related defects from multiple health-care facilities limits the ability of HVAC designers to furnish case studies and quantitative approaches.

This study helps HVAC designers acquire prior knowledge of decisions that may have led to unnecessary and avoidable maintenance. These design-related maintenance issues may cause unfavorable health and cost consequences.

A positive outlook on the impact of Industry 4.0 (I4.0) on sustainability prevails in the literature. However, some studies have highlighted potential areas of concern that have not yet been systematically addressed. The goal of this study is to challenge the assumption of a sustainable Fourth Industrial Revolution by (1) identifying the possible unintended negative impacts of I4.0 technologies on sustainability; (2) highlighting the underlying motivations and potential actions to mitigate such impacts; and (3) developing and evaluating alternative assumptions on the impacts of I4.0 technologies on sustainability.

Building on a problematization approach, a systematic literature review was conducted to develop potential alternative assumptions about the negative impacts of I4.0 on sustainability. Then, a Delphi study was carried out with 43 experts from academia and practice to evaluate the alternative assumptions. Two rounds of data collection were performed until reaching the convergence or stability of the responses.

The results highlight various unintended negative effects on environmental and social aspects that challenge the literature. The reasons behind the high/low probability of occurrence, the severity of each impact in the next five years and corrective actions are also identified. Unintended negative environmental effects are less controversial than social effects and are therefore more likely to generate widely accepted theoretical propositions. Finally, the alternative hypothesis ground is partially accepted by the panel, indicating that the problematization process has effectively opened up new perspectives for analysis.

This study is one of the few to systematically problematize the assumptions of the I4.0 and sustainability literature, generating research propositions that reveal several avenues for future research.

This paper aims to study the application of high-tolerance and flexible indigenous bacteria and fungi, along with the co-metabolism in recycled paper and cardboard mill (RPCM) wastewater treatment (WWT).

The molecular characterization of isolated indigenous bacteria and fungi was performed by 16S rRNA and 18S rRNA gene sequencing, respectively. Glucose was used as a cometabolic substrate to enhance the bioremediation process.

The highest removal efficiency was achieved for both chemical oxygen demand (COD) and color [78% COD and 45% color removal by Pseudomonas aeruginosa RW-2 (MZ603673), as well as approximately 70% COD and 48% color removal by Geotrichum candidum RW-4 (ON024394)]. The corresponding percentages were higher in comparison with the efficiency obtained from the oxidation ditch unit in the full-scale RPCM WWT plant.

Indigenous P. aeruginosa RW-2 and G. candidum RW-4 demonstrated effective capability in RPCM WWT despite the highly toxic and low biodegradable nature, especially with the assistance of glucose.

In this case study, we examine how a citrus peel valorising company based in the Netherlands was able to adopt a circular business model while navigating regulatory, managerial, and supply chain-related barriers.

In-depth, semi-structured interviews with key personnel in the company, notes from field observations, photographs of the production process, and documents from a legal judgement served as data for this single, qualitative case study. Data were coded inductively using the in vivo technique and were further developed into four themes and a case description.

Results from our study indicate that the regulatory and political contexts in the Netherlands were critical to the company’s success. Like in the case of most fruitful industrial symbioses, partnerships founded on mutual trust and economically appealing value propositions played a crucial role in ensuring commercial viability. Collaborating with larger corporations and maintaining transparent communication with stakeholders were also significant contributing factors. Lastly, employees’ outlook towards circularity combined with their willingness to learn new skills were important driving factors as well.

In addition to expanding the scholarship on the adoption of circular business models, this research offers novel insights to policymakers and practitioners. It provides empirical evidence regarding the importance of public awareness, adaptable legislation, and harmonised policy goals for supporting sustainable entrepreneurship in the circular economy.