Search results

The purpose of this paper is to present a theoretical framework for capacity building in post disaster construction and demolition (C & D) waste management at a national level to address the identified capacity gaps in managing disaster waste resulting from natural hazards.

Data were gathered through pilot interviews, case studies and expert opinion surveys representing government, non-government and other sector organisations involved in post disaster waste management.

The study revealed unavailability of a single point of responsibility and provision for disaster waste in existing policies and capacity constraints in prevailing peace time solid waste management practices which were identified as major capacity gaps. Establishment of a regulatory body and enforceable rules and regulations with necessary levels of capacities was identified and presented in a theoretical framework comprising of seven identified areas for capacity building in post disaster waste management.

This study is limited to disaster C & D waste as debris generated from totally or partially damaged buildings and infrastructure as a direct impact of natural hazards or from demolished buildings and infrastructure at rehabilitation or early recovery stages. Waste generated during reconstruction phase of post disaster management cycle is not considered as disaster C & D waste for purposes of this study.

The research enabled analysis of existing capacities and presents approaches for capacity building for identified gaps in post disaster C & D waste management to attain sustainable post disaster waste management for future resilience.

The theory of complex adaptive systems (CASs) represents an interesting perspective to study the characteristics of circular supply chains (CSCs). In this regard, the current literature lacks evidence regarding coordination and integration mechanisms, characteristics of the environment and emerging system properties of CSCs. This paper aims to fill this gap and focuses on how and why companies design (i.e. configure and coordinate) their CSCs and what value these design choices help to create across different industries.

The authors use a multiple case study approach and analyze data collected from a sample of five sustainable start-ups operating in the fashion and construction industries in Italy to better understand how these companies design (i.e. configure and coordinate) their CSCs.

Results reveal that in the two industries under investigation, the design of CSCs built around open and closed–loop logic is triggered by the intention to solve a negative sustainability impact. The sustainability impact determines whether the value is restored within the same supply chain, in another, or inside or outside the same industry. Interestingly, start-ups appear to coordinate other CSC actors with three leading roles: (1) orchestrator, (2) integrated orchestrator and (3) circular manufacturer. The coordination role of the start-ups differs in each supply chain configuration based on the level of vertical integration of manufacturing activities.

From a theoretical perspective, the authors' results expand previous supply chain management (SCM) literature by presenting an empirical analysis of the configuration and coordination of CSCs, and discussing the drivers for creating such circularity from a CAS perspective. From a managerial perspective, the authors offer a practical experience to entrepreneurs on how to transform circular and sustainable business model aspirations into CSC practices.

The circular economy business models (CEBMs) provide ways for firms operating in the construction industry to move from a linear to a circular approach. Thus, this study aims to explore CEBM research within the construction sector to show the focus area of studies, highlighting new areas that require attention.

This study adopted a bibliometric approach, using the Scopus database as the data source. The keywords used for paper extraction from the database were “circular economy business” OR “circular business” AND “model” OR “models” AND “construction industry” OR “building industry”. The VOSviewer software was then used to prepare a co-occurrence and co-authorship map based on the bibliographic data gathered.

The study’s findings reveal five research clusters in the construction industry. These clusters include circular construction intelligence, modular business modelling, eco-construction, sustainable construction economics and smart energy-efficient buildings. The two most cited scholars had two publications each, while the top journals are the Journal of Cleaner Production and Sustainable Production and Consumption. This study concludes that there is a need for research within the construction sector to focus on CEBMs’ archetypes and frameworks. This will enable a smooth transition from linear to circular business models in the sector.

The information was gathered from a single database, Scopus; hence, using other databases, including Web of Science, Google Scholar and Dimensions, might produce more articles for examination and, consequently, different findings on the subject under investigation.

These findings would assist researchers in considering the areas mentioned, which are yet to receive attention, and, by extension, enhance economic development while maintaining environmental sustainability.

This paper made a significant contribution to the body of knowledge by identifying scholars and platforms that have been instrumental in advancing CEBM research and highlighting new areas that require attention in the construction sector.

The purpose of this study is to investigate the benefits and challenges of implementing circular economy (CE), as well as shed light on the influence of procurement strategy in CE implementation in construction projects.

A qualitative research approach with abductive reasoning was adopted. The empirical data were collected from the construction industry in the United Arab Emirates (UAE).

The results reveal that clients, consultants and contractors have limited awareness, knowledge and motivation to implement CE in construction projects. The absence of incentives to design projects following CE principles, lack of involvement of contractors and suppliers, non-use of materials that use CE principles and current procurement strategies are the main challenges for the implementation of CE in the UAE.

Previous research offers limited knowledge on CE and its implementation in construction projects particularly from a procurement strategy perspective. The findings of the study provide new knowledge of the benefits, challenges and role of procurement strategy for implementing CE. It is suggested that collaborative and partnering-based procurement methods are needed to facilitate the effective implementation of CE.

The reuse of timber building parts, when designing new buildings, has become a topic of increasing discussion as a proposed circular solution in support of sustainable development goals. Designers face the difficulty of identifying and applying different design strategies for reuse due to multiple definitions, which are used interchangeably. The purpose of this study is to propose a taxonomy to define the relationships between various concepts and practices that comprise the relevant strategies for reuse, notably design for disassembly (DfD) and design for adaptability (DfA).

Literature reviews were conducted based on research publications over the previous 12 years and located through the Web of Science and Scopus.

A taxonomy for the design process grounded on two strategies for reuse is presented: DfD and DfA. Based on previous work, the taxonomy aims to build a vocabulary of definitions in DfD and DfA to support other researchers and practitioners working in the field.

The research is limited to the design phase of timber-based buildings. It does not take into account the other phases of the construction process, neither other kind of construction methods.

The application of the taxonomy can facilitate communication between different actors and provide a way for building product manufacturers to demonstrate their reuse credentials, enabling them to produce and promote compliant products and thereby support design for reuse strategies.

This paper could contribute to a closer collaboration of all stakeholders involved in the building process since the very early phases of the conceptual design.

This paper contributes a comprehensive taxonomy to support the deployment of circular reuse strategies and assist designers and other stakeholders from the earliest of phases in the building’s life cycle. The proposed definition framework provided by the taxonomy resolves the longstanding lack of a supporting vocabulary for reuse and can be used as a reference for researchers and practitioners working with the DfD and DfA.

In recent years, 3D printing technologies have been widely used in the construction industry. 3D printing in construction is very attractive because of its capability of process automation and the possibility of saving labor, waste materials, construction time and hazardous procedures for humans. Significant researches were conducted to identify the performance of the materials, while some researches focused on the development of novel techniques and methods, such as building information modeling. This paper aims to provide a detailed overview of the state-of-the-art of currently used 3D printing technologies in the construction areas and global acceptance in its applications.

The working principle of additive manufacturing in construction engineering (CE) is presented in terms of structural design, materials used and theoretical background of the leading technologies that are used to construct buildings and structures as well as their distinctive features.

The trends of 3D printing processes in CE are very promising, as well as the development of novel materials, will gain further momentum. The findings also indicate that the digital twin (DT) in construction technology would bring the industry a step forward toward achieving the goal of Industry 5.0.

This review highlights the prospects of digital manufacturing and the DT in construction engineering. It also indicates the future research direction of 3D printing in various constriction sectors.