Search results

The purpose of this paper is to present a theoretical framework for capacity building in post disaster construction and demolition (C & D) waste management at a national level to address the identified capacity gaps in managing disaster waste resulting from natural hazards.

Data were gathered through pilot interviews, case studies and expert opinion surveys representing government, non-government and other sector organisations involved in post disaster waste management.

The study revealed unavailability of a single point of responsibility and provision for disaster waste in existing policies and capacity constraints in prevailing peace time solid waste management practices which were identified as major capacity gaps. Establishment of a regulatory body and enforceable rules and regulations with necessary levels of capacities was identified and presented in a theoretical framework comprising of seven identified areas for capacity building in post disaster waste management.

This study is limited to disaster C & D waste as debris generated from totally or partially damaged buildings and infrastructure as a direct impact of natural hazards or from demolished buildings and infrastructure at rehabilitation or early recovery stages. Waste generated during reconstruction phase of post disaster management cycle is not considered as disaster C & D waste for purposes of this study.

The research enabled analysis of existing capacities and presents approaches for capacity building for identified gaps in post disaster C & D waste management to attain sustainable post disaster waste management for future resilience.

The theory of complex adaptive systems (CASs) represents an interesting perspective to study the characteristics of circular supply chains (CSCs). In this regard, the current literature lacks evidence regarding coordination and integration mechanisms, characteristics of the environment and emerging system properties of CSCs. This paper aims to fill this gap and focuses on how and why companies design (i.e. configure and coordinate) their CSCs and what value these design choices help to create across different industries.

The authors use a multiple case study approach and analyze data collected from a sample of five sustainable start-ups operating in the fashion and construction industries in Italy to better understand how these companies design (i.e. configure and coordinate) their CSCs.

Results reveal that in the two industries under investigation, the design of CSCs built around open and closed–loop logic is triggered by the intention to solve a negative sustainability impact. The sustainability impact determines whether the value is restored within the same supply chain, in another, or inside or outside the same industry. Interestingly, start-ups appear to coordinate other CSC actors with three leading roles: (1) orchestrator, (2) integrated orchestrator and (3) circular manufacturer. The coordination role of the start-ups differs in each supply chain configuration based on the level of vertical integration of manufacturing activities.

From a theoretical perspective, the authors' results expand previous supply chain management (SCM) literature by presenting an empirical analysis of the configuration and coordination of CSCs, and discussing the drivers for creating such circularity from a CAS perspective. From a managerial perspective, the authors offer a practical experience to entrepreneurs on how to transform circular and sustainable business model aspirations into CSC practices.

The circular economy business models (CEBMs) provide ways for firms operating in the construction industry to move from a linear to a circular approach. Thus, this study aims to explore CEBM research within the construction sector to show the focus area of studies, highlighting new areas that require attention.

This study adopted a bibliometric approach, using the Scopus database as the data source. The keywords used for paper extraction from the database were “circular economy business” OR “circular business” AND “model” OR “models” AND “construction industry” OR “building industry”. The VOSviewer software was then used to prepare a co-occurrence and co-authorship map based on the bibliographic data gathered.

The study’s findings reveal five research clusters in the construction industry. These clusters include circular construction intelligence, modular business modelling, eco-construction, sustainable construction economics and smart energy-efficient buildings. The two most cited scholars had two publications each, while the top journals are the Journal of Cleaner Production and Sustainable Production and Consumption. This study concludes that there is a need for research within the construction sector to focus on CEBMs’ archetypes and frameworks. This will enable a smooth transition from linear to circular business models in the sector.

The information was gathered from a single database, Scopus; hence, using other databases, including Web of Science, Google Scholar and Dimensions, might produce more articles for examination and, consequently, different findings on the subject under investigation.

These findings would assist researchers in considering the areas mentioned, which are yet to receive attention, and, by extension, enhance economic development while maintaining environmental sustainability.

This paper made a significant contribution to the body of knowledge by identifying scholars and platforms that have been instrumental in advancing CEBM research and highlighting new areas that require attention in the construction sector.

The purpose of this study is to investigate the benefits and challenges of implementing circular economy (CE), as well as shed light on the influence of procurement strategy in CE implementation in construction projects.

A qualitative research approach with abductive reasoning was adopted. The empirical data were collected from the construction industry in the United Arab Emirates (UAE).

The results reveal that clients, consultants and contractors have limited awareness, knowledge and motivation to implement CE in construction projects. The absence of incentives to design projects following CE principles, lack of involvement of contractors and suppliers, non-use of materials that use CE principles and current procurement strategies are the main challenges for the implementation of CE in the UAE.

Previous research offers limited knowledge on CE and its implementation in construction projects particularly from a procurement strategy perspective. The findings of the study provide new knowledge of the benefits, challenges and role of procurement strategy for implementing CE. It is suggested that collaborative and partnering-based procurement methods are needed to facilitate the effective implementation of CE.

The reuse of timber building parts, when designing new buildings, has become a topic of increasing discussion as a proposed circular solution in support of sustainable development goals. Designers face the difficulty of identifying and applying different design strategies for reuse due to multiple definitions, which are used interchangeably. The purpose of this study is to propose a taxonomy to define the relationships between various concepts and practices that comprise the relevant strategies for reuse, notably design for disassembly (DfD) and design for adaptability (DfA).

Literature reviews were conducted based on research publications over the previous 12 years and located through the Web of Science and Scopus.

A taxonomy for the design process grounded on two strategies for reuse is presented: DfD and DfA. Based on previous work, the taxonomy aims to build a vocabulary of definitions in DfD and DfA to support other researchers and practitioners working in the field.

The research is limited to the design phase of timber-based buildings. It does not take into account the other phases of the construction process, neither other kind of construction methods.

The application of the taxonomy can facilitate communication between different actors and provide a way for building product manufacturers to demonstrate their reuse credentials, enabling them to produce and promote compliant products and thereby support design for reuse strategies.

This paper could contribute to a closer collaboration of all stakeholders involved in the building process since the very early phases of the conceptual design.

This paper contributes a comprehensive taxonomy to support the deployment of circular reuse strategies and assist designers and other stakeholders from the earliest of phases in the building’s life cycle. The proposed definition framework provided by the taxonomy resolves the longstanding lack of a supporting vocabulary for reuse and can be used as a reference for researchers and practitioners working with the DfD and DfA.

The construction sector is increasingly engaged to explore the potential application of building information modelling (BIM) for the sustainability of the buildings. BIM can be applied conjugated to certification methods to evaluate the sustainability of the buildings, and it is known as building sustainability assessment (BSA). This article aims to explore applications of BIM in the sustainability analysis of buildings, including five types of BSA.

A literature review from 2009 to 2020 considering a combination of search terms related to BIM and BSA complemented the analysis. The bibliometric analysis indicates an increase in the number of publications on this topic of study in the last five years. A peak occurred in 2015 and 2020, with 51 and 66 publications, respectively.

The results showed that BIM contributes to achieving part of the sustainability requirements from BSA, especially quantitative requirements that are related to material and resources. However, a complete analysis between BIM and BSA is still a challenge since part of BSA's have a lack information in their requirements and BIM softwares present interoperability problems that difficult an integrated analysis to extract information directly from the software to attend BSA's requirements.

The results contribute to analysing the evolution of studies about BIM and to understand the limitation in the applicability with sustainability rating systems. Future directions of research indicate the necessity to improve the use of BIM in the sustainability analysis of the buildings, but with a good perspective regarding the application of BIM in material and resources requirements, and waste management in construction sites.

This research studies the behavior choice of key actors in the construction supply chain and constructs a model which includes the benefit function of the government, contractors and owners, aiming at improving the coverage of green buildings.

In this paper, tripartite dynamic game is studied and simulated based on duplicate dynamic equation. The tripartite game under government intervention is rarely considered, and government punishment measures are seldom introduced into the research.

According to the simulation results, the practical insights in line with the development of green supply chain are put forward. Rewards and punishments affect the development of the supply chain. New technologies and new materials accelerate the development of green supply chain and then improve the coverage of green buildings.

This paper constructs a dynamic model based on complete information rationality, which is difficult to realize in practice, for information is incomplete and human rationality is limited.

In fact, the government has not issued a punishment document to introduce a new variable adjustment model.

Labour productivity in construction has fallen behind other industries in most of the world and has declined continuously for decades. Although several scholarly research projects have been conducted to salvage the prevalent low labour productivity in construction, contractors in the construction industry have continued to grapple with the devastating impact of low productivity. The purpose of this study is to determine key areas of focus necessary to promote productivity growth in construction.

Bibliometric and scientometric assessments were conducted to map the existing construction labour productivity (CLP) studies and establish key focus areas in the research domain. The keywords “Construction Productivity” OR “Construction Labour Productivity” OR “Construction Labor Productivity” OR “Construction Worker Productivity”.

Emerging trends in the CLP research field are reported. The study also determined the most productive authors and collaboration among authors, most productive journals, most active regions and publications with the highest impact in CLP research.

Documents published in the Scopus database were considered for analysis because of the wider coverage of the database. Journal and conference articles written in English language represent the inclusion criteria, while articles in press, review, book chapters, editorial, erratum, note, short survey and data paper were excluded from analysis. The study is also limited to documents published from 2012 to 2021.

The study brought to the awareness of the industry practitioners and other construction stakeholders, the key knowledge areas that are critical to promoting productivity growth in construction.

Except bibliometric analysis, previous research studies have used different approaches to investigate productivity in construction. The study presented future research directions through the emerging knowledge areas identified in the study.

The paper seeks to bridge the already familiar benefits of 3D printing (3DP) to the rehabilitation of cultural heritage, still based on the use of complex and expensive handcrafted techniques and scarce materials.

A compilation of different information on frequent anomalies in cultural heritage buildings and commonly used materials is conducted; subsequently, some innovative techniques used in the construction sector (3DP and 3D scanning) are addressed, as well as some case studies related to the rehabilitation of cultural heritage building elements, leading to a reflection on the opportunities and challenges of this application within these types of buildings.

The compilation of information summarised in the paper provided a clear reflection on the great potential of 3DP for cultural heritage rehabilitation, requiring the development of new mixtures (lime mortars, for example) compatible with the existing surface and, eventually, incorporating some residues that may improve interesting properties; the design of different extruders, compatible with the new mixtures developed and the articulation of 3D printers with the available mapping tools (photogrammetry and laser scanning) to reproduce the component as accurately as possible.

This paper sets the path for a new application of 3DP in construction, namely in the field of cultural heritage rehabilitation, by identifying some key opportunities, challenges and for designing the process flow associated with the different technologies involved.

Construction industry and the built environment professions play an important role in contributing to society’s improved resilience. It is therefore important to improve their knowledgebase to strengthen their capacities. This paper aims to identify gaps in the knowledgebase of construction professionals that are undermining their ability to contribute to the development of a more disaster resilient society. The paper also provides a series of recommendations to key actors in the built environment on how to more effectively mainstream disaster resilience in the construction process.

The paper reports the findings of 87 stakeholder interviews with: national and local government organisations; the community; non-governmental organisations, international non-governmental organisation and other international agencies; academia and research organisations; and the private sector, which were supplemented by a comprehensive analysis of key policies related to disaster resilience and management. The findings were validated using focus group discussions that were conducted as part of six organised stakeholder workshops.

The primary and secondary data generated a long list of needs and skills. Finally, the identified needs and skills were combined “like-for-like” to produce broader knowledge gaps. Some of the key knowledge gaps identified are: governance, legal frameworks and compliance; business continuity management; disaster response; contracts and procurement; resilience technologies, engineering and infrastructure; knowledge management; social and cultural awareness; sustainability and resilience; ethics and human rights; innovative financing mechanisms; multi stakeholder approach, inclusion and empowerment; post disaster project management; and multi hazard risk assessment. The study also identifies a series of recommendations to key actors in the built environment on how to more effectively mainstream disaster resilience in the construction process. The recommendations are set out in five key themes: education, policy, practice, research and cross-cutting.

This study is part of an EU funded research project that is seeking to develop innovative and timely professional education that will update the knowledge and skills of construction professionals in the industry and enable them to contribute more effectively to disaster resilience building efforts.

The paper provides an extensive analysis of the gaps in the knowledgebase of construction professionals that are undermining their ability to contribute to the development of a more disaster resilient society. Accordingly, the paper recommends major changes in construction education, research, policy and practice with respect to mainstreaming disaster resilience within the construction process.