Search results

This paper studies organizational change following a shift in an industry environment, in the context of how a focused factory adapts to a change in its manufacturing objectives. We use the organizational nature of production operations to suggest that the effectiveness of adaptation will depend on how well the manufacturing requirements of the new objectives match manufacturing capabilities at the production line level. We test our hypotheses using primary data from the Hartselle, Alabama compressor manufacturing focused factory of the Copeland Corporation. The results suggest that factors that influence adaptability derive from individual and organizational competence, and that the direction and extent of their influence depends on the systemic nature of the operational activity concerned. The results highlight roles of carefully designed complexity in operations and of process-oriented decision making on the shop floor in successful adaptation. This work contributes to our understanding of how business organizations overcome constraints to change.

This chapter addresses the dynamics in inter-organizational relations. The authors probe the value networks so prevalent within contemporary ­manufacturing to put forward that their basic cooperation/competition duality manifests itself in practical terms as capability, appropriation, and governance paradoxes. The authors conducted a longitudinal ethnographic study aimed at capturing the process by which inter-organizational collabor­ation in ­manufacturing value networks is enacted. Our study finds that inter-organizational relations are “nested” in that a relationship plays out over an interpersonal network where the inter-organizational relationships are a framework for action, while simultaneously interpersonal interactions affect how the inter-organizational relationships take shape and evolve. Furthermore, we found that inter-organizational dynamics is essentially a stratified process. Solving particular and concrete problems at the surface level, with regard to specific collaboration issues between organizations, simultaneously shapes truces with regard to the underlying capability, appropriation, and governance paradoxes.

Currently heating and cooling in buildings is responsible for over 30% of the primary energy consumption in the United Kingdom with a similar amount in China. We analyze heat pumps and district thermal energy network for efficient buildings. Their advantages are examined (i.e., flexibility in choosing heat sources, reduction of fuel consumption and increased environmental quality, enhanced community energy management, reduced costs for end users) together with their drawbacks, when they are intended as means for efficient building heating and cooling.

A literature review observed a range of operating conditions and challenges associated with the efficient operation of district heating and cooling networks, comparing primarily the UK’s and China’s experiences, but also acknowledging the areas of expertise of European, the United States, and Japan. It was noted that the efficiency of cooling networks is still in its infancy but heating networks could benefit from lower distribution temperatures to reduce thermal losses. Such temperatures are suitable for space heating methods provided by, for example, underfloor heating, enhanced area hydronic radiators, or fan-assisted hydronic radiators. However, to use existing higher temperature hydronic radiator systems (typically at a temperatures of >70°C) a modified heat pump was proposed, tested, and evaluated in an administrative building. The results appears to be very successful.

District heating is a proven energy-efficient mechanism for delivering space heating. They can also be adaptable for space cooling applications with either parallel heating and cooling circuits or in regions of well-defined seasons, on flow and return circuit with a defined change-over period from heating to cooling. Renewable energy sources can provide either heating or cooling through, for example, biomass boilers, photovoltaics, solar thermal, etc. However, for lower loss district heating systems, lower distribution temperatures are required. Advanced heat pumps can efficiently bridge the gap between lower temperature distribution systems and buildings with higher temperature hydronic heating systems

This chapter presents a case for district heating (and cooling). It demonstrates the benefits of reduced temperatures in district heating networks to reduce losses but also illustrates the need for temperature upgrading where building heating systems require higher temperatures. Thus, a novel heat pump was developed and successfully tested.

Sustainable development calls for a larger share of intermittent renewable energy. To mitigate this intermittency, Compressed Air Energy Storage (CAES) technology was introduced. This technology can be made more sustainable by recovering the heat of the compression phase and reusing it during the discharge phase, resulting in an adiabatic CAES without the need for burning of fossil fuels. The key process parameters of CAES are temperature, pressure ratios, and the mass flow rates of air and thermal fluids. The variation in these parameters during the charge and discharge phases significantly influences the performance of CAES plants. In this chapter, the transient thermodynamic behavior of the system under various operating conditions is analyzed and the impact of heat recovery on the discharge phase energy efficiency, power generation, and CO₂ emissions is studied. Simulations are carried out over the air pressure range from 2,500 to 7,000 kPa for a 65 MW system over a five-hour discharge duration. It is also assumed that the heat loss in the air storage and the hot thermal fluid tank is insignificant and standby duration does not impact the status of the system. This result shows that the system exergy and the generated power are more sensitive to pressure change at higher pressures. This work also reveals that every 10°C increase on the temperature of the stored air can lead to a 0.83% improvement in the energy efficiency. The result of the transient thermodynamic model is used to estimate the reduction in CO₂ emissions in CAES systems. According to the obtained result, a 65 MW ACAES plant can reduce about 17,794 tons of CO₂ emission per year compared to a traditional CAES system with the same capacity.

This paper is about how a command system allocated resources under profound uncertainty. The command system was the Soviet economy, the period was Stalin's dictatorship, and the resources were designated for military research & development. The context was formed by the limits of the existing aviation propulsion technology, the need to replace it with another, and uncertainty as to how to do so. We observe the formation of a quasi-market in which rival agents proposed projects and competed for funding to carry them out. We find rivalry and rent seeking, imperfectly regulated by principals. As rent seeking spread and uncertainty was reduced, the quasi-market was closed down and replaced by strict hierarchical allocation and monitoring. In theory, a dictator cannot commit to refrain from taxing the returns from today's effort tomorrow; therefore, we expect agents in a command system to seek only short-term returns from quasi-market activity. Agents’ willingness to invest in the Soviet quasi-market for inventions is ascribed to a reputation mechanism that enforced long-run returns.

The impact of climate change towards water surface resources is crucial, particularly in developing and non-developing countries. Groundwater as a main water resource is thus an essential. However, contamination due to hydrocarbon spills affects the groundwater as a water resource, especially as a main source of drinking water. This chapter investigates the light non-aqueous phase liquid (LNAPL) penetrations in double-porosity soil with different moisture contents and with or without vibration impact. It also explains the LNAPL penetration phenomena by employing image analysis. The physical laboratory experiments were implemented using an acrylic cylinder, a mirror, toluene and a Nikon D90 DSLR digital camera. Prepared soil was poured in an acrylic cylinder and compressed with compressor until it became 10 cm in height. LNAPL was then poured instantaneously onto the acrylic cylinder that was filled with soil sample. The LNAPL penetration patterns were recorded and monitored using a Nikon D90 DSLR digital camera. The processing technique was conducted at predetermined time intervals using Surfer software and Matlab routine to plot the LNAPL pattern. The results showed that a higher penetration rate of LNAPL occurred with higher moisture content and without vibration impact. The penetration time for LNAPL to reach the bottom of the soil sample was found to be longer for the soil that had low moisture content and with vibration impact.

In this chapter, we first examine the distribution characteristics of firm performance across different competitive industry contexts and periodic economic conditions of growth, recession, and recovery. There is mounting evidence that the contours of accounting-based economic returns consistently display (extreme) left-skewed leptokurtic distributions with negative risk-return relationships, which implies the existence of many negative performance outliers and some positive outliers. We note how negative skewness, excess kurtosis, and inverse risk-return relationships prevail in industries with more intense competition and in economic growth scenarios where more innovative initiatives compete. As the study of outliers typically is ignored in mainstream management studies, we extract a total of 23 extreme performers using a conventional winsorization technique that identifies 16 negative and 7 positive outliers. We study the performance trajectories of these firms over the full period and find that negative performers typically operate in capital-intensive innovative industries whereas positive performers operate in activities that cater to prevailing demand conditions and expand the business in a balanced manner. The firms that under- and over-perform as measured by the financial return ratio both constitute smaller firms compared to the total sample and show how relative movements in the ratio numerator and denominator affect the recorded return measure. However, the negative outliers generally use their public listing to access capital for investment in more risky development efforts that require a certain scale to succeed and thereby limits their flexibility. The positive outliers appear to expand their business activities in incremental responses to evolving market demands as a way to enhance maneuverability and secure competitive advantage by honing their unique firm-specific capabilities.

This paper deals with the organizing of interactive product development. Developing products in interaction between firms may provide benefits in terms of specialization, increased innovation, and possibilities to perform development activities in parallel. However, the differentiation of product development among a number of firms also implies that various dependencies need to be dealt with across firm boundaries. How dependencies may be dealt with across firms is related to how product development is organized. The purpose of the paper is to explore dependencies and how interactive product development may be organized with regard to these dependencies.

The analytical framework is based on the industrial network approach, and deals with the development of products in terms of adaptation and combination of heterogeneous resources. There are dependencies between resources, that is, they are embedded, implying that no resource can be developed in isolation. The characteristics of and dependencies related to four main categories of resources (products, production facilities, business units and business relationships) provide a basis for analyzing the organizing of interactive product development.

Three in-depth case studies are used to explore the organizing of interactive product development with regard to dependencies. The first two cases are based on the development of the electrical system and the seats for Volvo’s large car platform (P2), performed in interaction with Delphi and Lear respectively. The third case is based on the interaction between Scania and Dayco/DFC Tech for the development of various pipes and hoses for a new truck model.

The analysis is focused on what different dependencies the firms considered and dealt with, and how product development was organized with regard to these dependencies. It is concluded that there is a complex and dynamic pattern of dependencies that reaches far beyond the developed product as well as beyond individual business units. To deal with these dependencies, development may be organized in teams where several business units are represented. This enables interaction between different business units’ resource collections, which is important for resource adaptation as well as for innovation. The delimiting and relating functions of the team boundary are elaborated upon and it is argued that also teams may be regarded as actors. It is also concluded that a modular product structure may entail a modular organization with regard to the teams, though, interaction between business units and teams is needed. A strong connection between the technical structure and the organizational structure is identified and it is concluded that policies regarding the technical structure (e.g. concerning “carry-over”) cannot be separated from the management of the organizational structure (e.g. the supplier structure). The organizing of product development is in itself a complex and dynamic task that needs to be subject to interaction between business units.

In this chapter, a case of reverse supply chain is considered, where a product recovery facility receives sensors and Radio Frequency Identification (RFID) tags embedded End-Of-Life (EOL) products. Sensors and RFID tags can capture and store component’s life cycle information during its economic life. This technology can provide data about contents and conditions of products and components without the need of actual disassembly and inspection. It also determines the remaining lives of the components which eventually translate into their quality levels.

The example considered here presents an advanced-repair-to-order-and-disassembly-to-order system. It disassembles the components to meet the components’ demands, repairs the products to meet the products’ demands and recycles the materials to meet the materials’ demands. The received EOL products may have different design alternatives. The objective of the proposed multi-criteria decision-making model is to determine which of the design alternatives is best in fulfilling the various criteria.

The chapter considers the significance of the oil and gas industry for the Russian economy. The authors analyze the current state of the oil and gas industry, their specific weight in the structure of Russian GDP, and tax revenues from this industry to the Russian budget that was estimated. We give scenario analysis that considers the problems that the Russian economy may face because of the sanctions, the price fluctuations at the commodity market, and the crisis phenomena in the world economy. The chapter points out that localization of technology production and development of technologies for offshore oil and gas production in the Arctic zone may become an incentive to further ensure import substitution for Russia. At present, the experience of Arctic defense enterprises in the production of equipment for oil and gas production and processing is becoming increasingly popular. The chapter elaborates the most significant examples of the creation of new industries in the Arctic zone, the prospects of seismic exploration on the Arctic shelf, and that localization of production capacities and service bases will allow obtaining a multiplicative incentive for a qualitatively new industrial and infrastructure development of the northern territories. Also, we provide an assessment of the development of liquefied natural gas (LNG) industry, which makes economically attractive use of natural gas on a regional level as LNG opens the way to fuel high-power needs and to long-distance transport.