Search results

The purpose of this paper is to assess the appropriateness of equal weights estimation (sumscores) and the application of the composite equivalence index (CEI) vis-à-vis differentiated indicator weights produced by partial least squares structural equation modeling (PLS-SEM).

The authors rely on prior literature as well as empirical illustrations and a simulation study to assess the efficacy of equal weights estimation and the CEI.

The results show that the CEI lacks discriminatory power, and its use can lead to major differences in structural model estimates, conceals measurement model issues and almost always leads to inferior out-of-sample predictive accuracy compared to differentiated weights produced by PLS-SEM.

In light of its manifold conceptual and empirical limitations, the authors advise against the use of the CEI. Its adoption and the routine use of equal weights estimation could adversely affect the validity of measurement and structural model results and understate structural model predictive accuracy. Although this study shows that the CEI is an unsuitable metric to decide between equal weights and differentiated weights, it does not propose another means for such a comparison.

The results suggest that researchers and practitioners should prefer differentiated indicator weights such as those produced by PLS-SEM over equal weights.

To the best of the authors’ knowledge, this study is the first to provide a comprehensive assessment of the CEI’s usefulness. The results provide guidance for researchers considering using equal indicator weights instead of PLS-SEM-based weighted indicators.

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

This paper aims to explore the ambiguity and limitations of measuring firm-level multinationality (FLM) using theoretical and empirical comparisons of existing methods. The paper puts forward a list of five key aspects that collectively serve as a tool for researchers to select the most appropriate method for future research and as a basis for the future development of methods.

Firstly, the author reviews existing methods of measuring FLM and consolidates findings into five key aspects. Secondly, the author uses the aspects to compare existing methods theoretically, and subsequently, the author groups them into three distinct streams. Thirdly, the author compares existing methods across a sample of the 35 largest European MNEs by sales in 2020 to identify and demonstrate the ambiguity and limitations of these methods.

The author identifies the five key aspects of measuring FLM: framework, aggregation, segmentation, metrics and indicators. Using empirical comparison, the author empirically confirms the limitations highlighted in the literature and shows the differences and inconsistencies among methods, which cause confusion rather than clarity in the extant literature. Additionally, the author emphasises that three distinct streams further drive the debate on the regional/global nature and present further limitations of methods not mentioned in the literature to date.

This paper provides the most comprehensive review of the existing literature on FLM, resulting in five novel aspects of measuring FLM. The analysis of a sample of 35 European firms demonstrates and identifies the ambiguity and limitations of FLM-measuring methods.

This study aims to investigate the relationship between digital financial inclusion and economic growth in specific Asian countries, emphasizing the exploration of how digital financial inclusion dynamics impact gross domestic per capita income.

The study creates a digital financial inclusion composite index (DFII) by incorporating essential metrics from the Global Findex report. Economic growth is measured using Gross Domestic Product per capita income in its natural logarithmic form (LnPCI), with three control variables– employment-to-population ratio; population growth and inflation. The analysis utilizes a fixed-effect dummy variable model to examine the relationship, considering unobserved country-specific heterogeneity. 30 Asian countries have been selected for the study for the periods 2014, 2017 and 2021 based on their availability, as outlined in Table 4.

The research revealed a robust positive correlation between the Digital Financial Inclusion Index (DFII) and logarithmic GDP per capita income (LnPCI), indicating higher per capita income with enhanced digital financial inclusion. Employment and population exhibited minimal influence, whereas inflation had a notable negative effect on per capita income. Population growth showed a limited impact. The model demonstrated a high explanatory power for the dependent variable (high R-squared), and the residuals displayed low autocorrelation (Durbin–Watson of 1.96).

This study adds to the existing literature by examining the intricate connection between digital financial inclusion (DFI) and economic growth in 30 Asian countries, employing a comprehensive composite index for analysis.

The purpose of this paper is to calculate the financial inclusion index and analyze its dynamics in developing countries.

The authors use the two-stage principal component analysis (PCA) method and consider financial technology innovations to improve the accuracy of the financial inclusion index.

The authors found a downward trend in the financial inclusion index in most developing countries over the study period. The authors also found that a high financial inclusion index is linked to high scores in the Doing Business and high business climate regulation ranking. In addition, the authors observed that the rates of low financial inclusion in developing countries are due to low utilization of and unequal access to financial services.

The analysis suggests that policymakers in developing countries could invest in digital infrastructure to extend access to financial services in remote areas. They could also encourage financial innovation, particularly in financial technologies, by adopting flexible regulatory frameworks. Promoting the financial inclusion of marginalized groups through targeted initiatives tailored to their needs is another solution. They could also encourage the use of financial services by raising awareness and educating populations through training programs. Finally, to improve the business climate, governments could simplify administrative procedures and promote transparency and legal stability.

Unlike previous studies, the use of the two-stage PCA method and the consideration of financial technology (Fintech) innovations such as mobile money in the determinants of the financial inclusion index improve the accuracy of the index.

The combination of an Engineered Cementitious Composite (ECC) layer and steel plate to reinforce RC beams (ESRB) is a new strengthening method. The ESRB was proposed based on the steel plate at the bottom of RC beams, aiming to solve the problem of over-reinforced RC beams and improve the bearing capacity of RC beams without affecting their ductility.

In this paper, the finite element model of ESRB was established by ABAQUS. The results were compared with the experimental results of ESRB in previous studies and the reliability of the finite element model was verified. On this basis, parameters such as the width of the steel plate, thickness of the ECC layer, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar were analyzed by the verified finite element model. Based on the load–deflection curve of ESRB, ESRB was discussed in terms of ultimate bearing capacity and ductility.

The results demonstrate that when the width of the steel plate increases, the ultimate load of ESRB increases to 133.22 kN by 11.58% as well as the ductility index increases to 2.39. With the increase of the damage degree of the original beam, the ultimate load of ESRB decreases by 23.7%–91.09 kN and the ductility index decreases to 1.90. With the enhancement of the cross-sectional area of longitudinal tensile rebar, the ultimate bearing capacity of ESRB increases to 126.75 kN by 6.2% and the ductility index elevates to 2.30. Finally, a calculation model for predicting the flexural capacity of ESRB is proposed. The calculated results of the model are in line with the experimental results.

Based on the comparative analysis of the test results and numerical simulation results of 11 test beams, this investigation verified the accuracy and reliability of the finite element simulation from the aspects of load–deflection curve, characteristic load and failure mode. Furthermore, based on load–deflection curve, the effects of steel plate width, ECC layer thickness, damage degree of the original beam and cross-sectional area of longitudinal tensile rebar on the ultimate bearing capacity and ductility of ESRB were discussed. Finally, a simplified method was put forward to further verify the effectiveness of ESRB through analytical calculation.

Prefabricated technology is gradually being applied to the construction of subway stations due to its characteristic of mechanization. However, the prefabricated subway station in China is in the initial stage of development, which is prone to construction safety issues. This study aims to evaluate the construction safety risks of prefabricated subway stations in China and formulate corresponding countermeasures to ensure construction safety.

A construction safety risk evaluation index system for the prefabricated subway station was established through literature research and the Delphi method. Furthermore, based on the structure entropy weight method, matter-element theory and evidence theory, a hybrid evaluation model is developed to evaluate the construction safety risks of prefabricated subway stations. The basic probability assignment (BPA) function is obtained using the matter-element theory, the index weight is calculated using the structure entropy weight method to modify the BPA function and the risk evaluation level is determined using the evidence theory. Finally, the reliability and applicability of the evaluation model are verified with a case study of a prefabricated subway station project in China.

The results indicate that the level of construction safety risks in the prefabricated subway station project is relatively low. Man risk, machine risk and method risk are the key factors affecting the overall risk of the project. The evaluation results of the first-level indexes are discussed, and targeted countermeasures are proposed. Therefore, management personnel can deeply understand the construction safety risks of prefabricated subway stations.

This research fills the research gap in the field of construction safety risk assessment of prefabricated subway stations. The methods for construction safety risk assessment are summarized to establish a reliable hybrid evaluation model, laying the foundation for future research. Moreover, the construction safety risk evaluation index system for prefabricated subway stations is proposed, which can be adopted to guide construction safety management.

This study aimed at exploring the differential effects of different corporate governance (CG) indicators on risk management practices in Islamic financial institutions (IFIs) and conventional financial institutions (CFIs) of Pakistan. It also investigated the moderating role of institutional quality (IQ) in shaping the effects of CG practices on financial institutions of Pakistan.

A sample of 57 financial institutions including commercial banks, insurance companies and Modarba companies over the period 2006–2017 is used to carry out the empirical analysis. The authors applied the robust two-step system-generalized method of moments estimator, which is also called the dynamic panel data estimator. They also built the PCA-based composite index of CG and IQ by using different indicators to investigate the moderating role of IQ. They used three proxies for risk taking, five for CG and one for Shari’ah governance. To test the validity of the instruments, they applied the Arellano and Bond’s (1991) AR (1) and AR (2) tests and the J-statistic of Hansen (1982).

The results provided strong evidence that several individual characteristics of CG and the composite index are significantly related to the operational risk, the liquidity risk and the Z-score (a proxy for solvency risk). The results also revealed that IQ significantly and substantially contributes in reducing the level of risks. Finally, the estimation results indicated that the effects of CG on risk management are significantly different at IFIs and CFIs. This differential impact is mainly attributed to the fundamental differences in business models, operational strategies and contractual obligations of both types of institutions.

The findings of this study are important for enhancing our understanding of how CG relates to risk taking in Islamic and conventional financial services industries and how good quality institutions are important for formulating the governance effects on the risk-taking behavior of financial institutions. The findings suggest that a suitable size of board should be chosen to manage the risk effectively. As the findings show that the risk-taking behavior of IFIs differs from that of CFIs, the regulators and international standard setting bodies should tailor the regulatory frameworks accordingly.

This paper is different from the existing studies in four aspects. First, to the best of the authors’ knowledge, this is the first empirical investigation in Pakistan, which does the comparison of IFIs and CFIs while examining the impacts of CG on risk management. Second, the paper constructs the composite index of CG by considering several different indicators of governance and examines the combined effect of governance indicators on risk management process. Third, this paper adds to the growing literature on the role of IQ by investigating whether it acts as a moderator between CG structures and risk management and if yes, then whether this moderating role is different for IFIs and CFIs. Finally, the paper builds upon the existing research work on the CG effects for different types of financial institutions by proposing a single regression based analytical framework for comparing the effects across two different types of institutions, harvesting the benefits of higher degrees of freedom and avoiding/minimizing the measurement error.

This study investigates the impact of corporate social responsibility (CSR) on corporate innovation. We selected the listed nonfinancial firms of South Asian Economies. The sample of the study comprised a total of 426 listed manufacturing firms of South Asian Countries for period spans 10 years from 2012 to 2021. In this study, descriptive statistics, multicollinearity diagnostic tests, correlation analysis and two-step dynamic panel system generalized method of moments (GMM) were applied to analyze the data. CSR measured with three proxies' social indicators, environmental indicators, and CSR composite index of social and environmental indicators. However, corporate innovation is captured with number of citations received in a year and number of patents filed in the year. Overall, findings of the study using all measures of CSR shows that CSR significantly and positively related with corporate innovation. Our results find support for CSR-innovation view with all measures of CSR. The findings suggest that the current study is helpful for managers, regulators, policymakers, and researchers. For managers, the study helps them to make the CSR and innovation decision. The policymakers should take appropriate innovative decision while considering factors such as CSR. This study can also be extended by considering this study for developed and emerging economies sample.

A semiparametric stochastic frontier model is proposed for panel data, incorporating several flexible features. First, a constant elasticity of substitution (CES) production frontier is considered without log-transformation to prevent induced non-negligible estimation bias. Second, the model flexibility is improved via semiparameterization, where the technology is an unknown function of a set of environment variables. The technology function accounts for latent heterogeneity across individual units, which can be freely correlated with inputs, environment variables, and/or inefficiency determinants. Furthermore, the technology function incorporates a single-index structure to circumvent the curse of dimensionality. Third, distributional assumptions are eschewed on both stochastic noise and inefficiency for model identification. Instead, only the conditional mean of the inefficiency is assumed, which depends on related determinants with a wide range of choice, via a positive parametric function. As a result, technical efficiency is constructed without relying on an assumed distribution on composite error. The model provides flexible structures on both the production frontier and inefficiency, thereby alleviating the risk of model misspecification in production and efficiency analysis. The estimator involves a series based nonlinear least squares estimation for the unknown parameters and a kernel based local estimation for the technology function. Promising finite-sample performance is demonstrated through simulations, and the model is applied to investigate productive efficiency among OECD countries from 1970–2019.