Search results

This work aims to establish the relationship between painting art and sustainability, which allows for highlighting implications likely to improve sustainability for humanity's welfare.

To achieve this objective, painting art is measured by a composite index aggregating the quantity and quality represented by the market value. As for sustainable development, it is represented by a composite index comprising three variables: the climate change performance index (ecological dimension), the wage index reflecting distributive justice (social dimension) and the gross domestic product (economic dimension). The composite indices were determined through adjusted data envelopment analysis. In addition, two other methods are used in this work: correlation analysis and a neural network method. These methods are applied to data from 2007 to 2021 across the world.

The correlation method highlighted a perfect positive correlation between painting art and sustainability. As for the neural network method, it revealed that the quality of painting has the greatest impact on sustainability. The neural network method also showed that the most positively impacted variable of sustainability by painting art is the social variable, with a pseudo-probability of 0.90.

The relationship between painting art and sustainability is underexplored, in particular in terms of statistical analysis. Therefore, this research intends to fill this gap. Moreover, analysis of the relationship between both using composite indices computed via an original method (adjusted data envelopment analysis) and a neural network method is nonexistent, which constitutes the novelty of this work.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-01-2023-0006

Rapid urbanization and development of pilgrimage cities cause significant problems for the environment and society, leading to long-term challenges. Despite several discussions on city sustainability, the literature does not address some of the specific problems of pilgrimage cities. Hence, this study attempts at developing a method to examine the growth pattern and sustainability of pilgrimage cities in southern part of India.

The benchmarking method and the social, economic and environmental dimensions of sustainability are considered to construct the Pilgrimage City Sustainability Index (PCSI). Appropriate variables and categories are identified through a literature review and expert opinion survey. The benchmark values of the variables are derived by contemplating the pilgrimage cities of Tamil Nadu, one of the states with the largest tourist arrivals in India. Subsequently, three prominent pilgrimage cities from Tamil Nadu were chosen for the case study and the method was tested.

The result reveals that the cities investigated are performing above average in the sustainability index, with slight variations in their dimension scores. While the category scores of cities assist in identifying macro-level issues, the variable scores provide an insight into micro-level issues. Furthermore, the gap analysis between the benchmark and the present value of each variable discloses the immediate area of attention in each city. Thus, the cities could set more specific targets, frame strategies and/or collaborate with matching cities to bridge these gaps.

This index assessment provides a comparison of the pros and cons of these pilgrimage cities and helps identify their demand and supply. Policymakers can find appropriate tools and approaches that aid in sustainable urban development and tourism management.

To the best of our knowledge, this is the first study in emphasizing the application of the benchmarking method to assess the sustainability of Indian pilgrimage sites. With appropriate modifications, this method can be used in varied contexts across the globe.

The Chinese housing market has gone through rapid growth during the past decade, and house price forecasting has evolved to be a significant issue that draws enormous attention from investors, policy makers and researchers. This study investigates neural networks for composite property price index forecasting from ten major Chinese cities for the period of July 2005–April 2021.

The goal is to build simple and accurate neural network models that contribute to pure technical forecasts of composite property prices. To facilitate the analysis, the authors consider different model settings across algorithms, delays, hidden neurons and data spitting ratios.

The authors arrive at a pretty simple neural network with six delays and three hidden neurons, which generates rather stable performance of average relative root mean square errors across the ten cities below 1% for the training, validation and testing phases.

Results here could be utilized on a standalone basis or combined with fundamental forecasts to help form perspectives of composite property price trends and conduct policy analysis.

Fiber reinforced additive manufacturing (FRAM) is an emerging technology that combines additive manufacturing and composite materials. As a result, design freedom offered by the manufacturing process can be leveraged in design optimization. The purpose of the study is to propose a novel method that improves structural performance by optimizing 3D print orientation of FRAM components.

This work proposes a two-part design optimization method that optimizes 3D global print orientation and topology of a component to improve a structural objective function. The method considers two classes of design variables: (1) print orientation design variables and (2) density-based topology design variables. Print orientation design variables determine a unique 3D print orientation to influence anisotropic material properties. Topology optimization determines an optimal distribution of material within the optimized print orientation.

Two academic examples are used to demonstrate basic behavior of the method in tension and shear. Print orientation and sequential topology optimization improve structural compliance by 90% and 58%, respectively. An industry-level example, an aerospace component, is optimized. The proposed method is used to achieve an 11% and 15% reduction of structural compliance compared to alternative FRAM designs. In addition, compliance is reduced by 43% compared to an equal-mass aluminum design.

Current research surrounding FRAM focuses on the manufacturing process and neglects opportunities to leverage design freedom provided by FRAM. Previous FRAM optimization methods only optimize fiber orientation within a 2D plane and do not establish an optimized 3D print orientation, neglecting exploration of the entire orientation design space.

Socioeconomic development needs quality governance to provide and protect property rights and other economic means. In this regard, the current study examines the symmetric and asymmetric effect of composite governance index, unemployment rate (UR) and consumer price index on the crime rate (CR) in Pakistan.

The current study uses time series data (1996–2020) on CR, composite governance index, UR and consumer price index. In this study, the authors first constructed a composite governance index from six governance indicators using the principal component analysis (PCA) method. After that, the short-run and long-run symmetric and asymmetric effects were estimated through linear and non-linear autoregressive distributed lag (ARDL) models, respectively.

The authors found short-run and long-run symmetric and asymmetric effects of governance, unemployment and consumer prices (CPI) on the CR in Pakistan. For asymmetric effects, the findings show that high-quality governance diminishes and poor governance accelerates committed crimes in Pakistan. Interestingly, the asymmetric unemployment effect suggests that criminal behavior diminishes when people find job opportunities and do not adopt criminal behavior even if people lose employment. In other words, if unemployment decreases CR will fall, and when unemployment increases, the CR may not increase. Lastly, rising product prices lead to criminal behavior, while falling prices do not help to diminish the CR in Pakistan.

The study provides the first empirical evidence of symmetric and asymmetric responses of CR toward composite governance index, UR and consumer price index.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-09-2022-0625

The purpose of this paper is to assess the appropriateness of equal weights estimation (sumscores) and the application of the composite equivalence index (CEI) vis-à-vis differentiated indicator weights produced by partial least squares structural equation modeling (PLS-SEM).

The authors rely on prior literature as well as empirical illustrations and a simulation study to assess the efficacy of equal weights estimation and the CEI.

The results show that the CEI lacks discriminatory power, and its use can lead to major differences in structural model estimates, conceals measurement model issues and almost always leads to inferior out-of-sample predictive accuracy compared to differentiated weights produced by PLS-SEM.

In light of its manifold conceptual and empirical limitations, the authors advise against the use of the CEI. Its adoption and the routine use of equal weights estimation could adversely affect the validity of measurement and structural model results and understate structural model predictive accuracy. Although this study shows that the CEI is an unsuitable metric to decide between equal weights and differentiated weights, it does not propose another means for such a comparison.

The results suggest that researchers and practitioners should prefer differentiated indicator weights such as those produced by PLS-SEM over equal weights.

To the best of the authors’ knowledge, this study is the first to provide a comprehensive assessment of the CEI’s usefulness. The results provide guidance for researchers considering using equal indicator weights instead of PLS-SEM-based weighted indicators.

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

This paper aims to prevent gasket sealing failure in engineering, accurately predict gasket life, extend system life and improve sealing reliability. The accelerated life test method of flexible graphite composite–reinforced gaskets is established, the life distribution law of flexible graphite composite–reinforced gaskets is revealed, and the life prediction method of flexible graphite composite–reinforced gaskets with different allowable leakage rates is proposed, which can provide a reference for the life prediction of other types of gaskets.

In this study, flexible graphite composite–reinforced gaskets were tested for long-term high-temperature sealing performance on a multi-sample gasket accelerated life test rig. The data were also analyzed using the least squares method and the K-S hypothesis calibration method. A gasket time-dependent leakage model and an accelerated life model were also developed. Constant stress-accelerated life tests were conducted on flexible graphite composite–reinforced gaskets. On this basis, a gasket life prediction method at different allowable leakage rates was proposed.

The life distribution law of flexible graphite composite–reinforced gaskets is revealed. The results show that the life of the gasket obeys the Weibull distribution. The time-correlated leakage model and accelerated life model of the gasket were established. And the accelerated life test method of the flexible graphite composite–reinforced gasket was established. The life distribution parameters, accelerated life model parameters and life estimates of gaskets were obtained through tests. On this basis, a gasket life prediction method under different leakage rates was proposed, which can be used as a reference for other types of gaskets.

The research in this paper can better provide guidance for the use and replacement of gaskets in the project, which is also very meaningful for predicting the leakage condition of gaskets in the bolted flange connection system and taking corresponding control measures to reduce energy waste and pollution and ensure the safe operation of industrial equipment.

A multi-specimen gasket-accelerated life test device has been developed, and the design parameters of the device have reached the international advanced level. The life distribution law of the flexible graphite composite–reinforced gasket was revealed. The accelerated life test method for the flexible graphite composite–reinforced gasket was established. The life prediction method of the flexible graphite composite–reinforced gasket under different allowable leakage rates was proposed.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2023-0254/

This paper aims to explore the ambiguity and limitations of measuring firm-level multinationality (FLM) using theoretical and empirical comparisons of existing methods. The paper puts forward a list of five key aspects that collectively serve as a tool for researchers to select the most appropriate method for future research and as a basis for the future development of methods.

Firstly, the author reviews existing methods of measuring FLM and consolidates findings into five key aspects. Secondly, the author uses the aspects to compare existing methods theoretically, and subsequently, the author groups them into three distinct streams. Thirdly, the author compares existing methods across a sample of the 35 largest European MNEs by sales in 2020 to identify and demonstrate the ambiguity and limitations of these methods.

The author identifies the five key aspects of measuring FLM: framework, aggregation, segmentation, metrics and indicators. Using empirical comparison, the author empirically confirms the limitations highlighted in the literature and shows the differences and inconsistencies among methods, which cause confusion rather than clarity in the extant literature. Additionally, the author emphasises that three distinct streams further drive the debate on the regional/global nature and present further limitations of methods not mentioned in the literature to date.

This paper provides the most comprehensive review of the existing literature on FLM, resulting in five novel aspects of measuring FLM. The analysis of a sample of 35 European firms demonstrates and identifies the ambiguity and limitations of FLM-measuring methods.

This study aims to investigate the relationship between digital financial inclusion and economic growth in specific Asian countries, emphasizing the exploration of how digital financial inclusion dynamics impact gross domestic per capita income.

The study creates a digital financial inclusion composite index (DFII) by incorporating essential metrics from the Global Findex report. Economic growth is measured using Gross Domestic Product per capita income in its natural logarithmic form (LnPCI), with three control variables– employment-to-population ratio; population growth and inflation. The analysis utilizes a fixed-effect dummy variable model to examine the relationship, considering unobserved country-specific heterogeneity. 30 Asian countries have been selected for the study for the periods 2014, 2017 and 2021 based on their availability, as outlined in Table 4.

The research revealed a robust positive correlation between the Digital Financial Inclusion Index (DFII) and logarithmic GDP per capita income (LnPCI), indicating higher per capita income with enhanced digital financial inclusion. Employment and population exhibited minimal influence, whereas inflation had a notable negative effect on per capita income. Population growth showed a limited impact. The model demonstrated a high explanatory power for the dependent variable (high R-squared), and the residuals displayed low autocorrelation (Durbin–Watson of 1.96).

This study adds to the existing literature by examining the intricate connection between digital financial inclusion (DFI) and economic growth in 30 Asian countries, employing a comprehensive composite index for analysis.