Search results

The purpose of this paper is to investigate thermoregulation properties of different composite phase change materials (PCMs), which could be used in the high temperature environmental conditions to protect human body against the extra heat flow.

Three kinds of composite PCM samples were prepared using the selected pure PCMs, including n-hexadecane, n-octadecane and n-eicosane. The DSC experiment was performed to get the samples’ phase change temperature range and enthalpy. The simulated high temperature experiments were performed using human arms in three different high temperature conditions (40°C, 45°C, 50°C), and the skin temperature variation curves varying with time were obtained. Then a comprehensive index TGP was introduced from the curves and calculated to evaluate the thermoregulation properties of different composite PCM samples comprehensively.

Results show that the composite PCM samples could provide much help to the high temperature human body. It could decrease the skin temperature quickly in a short time and it will not cause the over-cooling phenomenon. Comparing with other two composite PCM samples, the thermoregulation properties of the n-hexadecane and n-eicosane composite PCM is the best.

Using the n-hexadecane and n-eicosane composite PCM may provide people with better protection against the high temperature conditions, which is significative for the manufacture of functional thermoregulating textiles, garments or equipments.

The purpose of this paper is to study thermal performance of metal foam/phase change materials composite under the influence of the enclosure aspect ratios (ratio of enclosure height: length). In this study, a compound metal foam/phase change material (PCM), which has been proved to be one of the most promising approaches for thermal conductivity promotion on PCMs, was used.

The PCM is considered initially at its melting temperature. The enclosure for all the cases has a constant volume with various aspect ratios. The left side of the enclosure is suddenly exposed to a thermal source having a constant heat flux, while the other three surfaces are kept thermally insulated. A two-dimensional numerical model considering the non-equilibrium thermal factor, non-Darcy effect and local natural convection was proposed. The coupling between velocity and pressure is solved using the SIMPLEC, and the Rhie and Chow interpolation is used to avoid the checker-board solutions for the pressure.

The effects of foam porosity and aspect ratio of the enclosure on the PCM’s melting time were investigated. The results indicated that enclosure aspect ratio plays a fundamental role in phase change of copper foam/PCM composites. For higher porosities, enclosures with bigger aspect ratios proved to led to optimal melting time. Besides, the best enclosure aspect ratio and foam porosity for a fixed-volume enclosure to have the shortest melting time are 2.1 and 91.66 per cent, respectively. However, for a specific amount of PCM inside a variable volume enclosure, the optimal melting time was for foam with ε = 95 per cent. The achieved results prove the great importance of selection of aspect ratio to benefit both conduction and convection heat transfer simultaneously.

The area of energy storage systems is original.

Phase change energy storage is an important solution for overcoming human energy crisis. This study aims to present an evaluation for the thermal performances of a phase change material (PCM) and a PCM–metal foam composite. Effects of pore size, pore density, thermal conductivity of solid structure and mushy region on the thermal storage process are examined.

In this paper, temperature, flow field and solid–liquid interface of a PCM with or without porous media were theoretically assessed. The influences of basic parameters on the melting process were analyzed. A PCM thermal storage device with a metal foam composite is designed and a thermodynamic analysis for it is conducted. The optimal PCM temperature and the optimal HTF temperature in the metal foam-enhanced thermal storage device are derived.

The results show that the solid–liquid interface of pure PCM is a line area and that of the mixture PCM is a mushy area. The natural convection in the melting liquid is intensive for a PCM without porous medium. The porous medium weakens the natural convection and makes the temperature field, flow field and solid–liquid interface distribution more homogeneous. The metal foam can greatly improve the heat storage rate of a PCM.

Thermal storage rate of a PCM is compared with that of a PCM–metal foam composite. A thermal analysis is performed on the multi-layered parallel-plate thermal storage device with a PCM embedded in a highly conductive porous medium, and an optimal melting temperature is obtained with the exergy optimization. The heat transfer enhancement with metal foams proved to be necessary for the thermal storage application.

This study aims to evaluate the thermal performance of phase change materials (PCMs) microcapsules (MCs) attached using SiO₂ microspheres and investigate the thermal regulation effect on the coated denim fabric.

The PCM microcapsule was prepared by in situ polymerization using a mixture of solid paraffin and butyl stearate as core material (CM) and methyl methacrylate as a monomer. The SiO₂ microparticles were attached to the outer layer of the membrane to enhance the thermal performance of MCs. The morphology, chemical structure, latent heat storage and thermal resistance of MCs were characterized. PCM MCs were coated on the denim fabric and thermo-gravimetric analysis was conducted; thermal insulation and thermal infrared imaging performance of the coated fabrics were also investigated.

The diameters of SiO₂ particles and PCMs MCs were 300-500 nm and 1 μm, respectively. SiO₂ was wrapped on single-wall PCMs MCs with the mass ratio of 1:5. With the addition of SiO₂, the phase transition temperature range of MCs increased from 34°C to 39°C, and the endothermic and exothermic latent heat decreased by 5.35 J/g and 10.07 J/g, respectively. The degradation rate of MCs was significantly slowed down at high temperature. The denim fabric coated with MCs revealed thermal regulation property. After absorbing heat, the MCs slowed down the rate of heat loss and extended the heat release time.

The phase transition temperature of the composite CM was wide, and the latent heat storage was reduced. The addition of SiO₂ particles can significantly slow down the rate of heat loss, but it further reduces the latent heat storage performance.

The method developed provided a simple and practical solution to improve the thermal regulation performance of fabrics.

The method of adjusting the phase transition temperature range of the composite CM is novel and many applications could be found in preparation of PCMs and thermal management.

This study aims to manufacture cotton fabric with thermal regulation performance by using the composite phase change material (CPCM) prepared by coating paraffin doped with expanded graphite (EG), and the thermal effect of the fabric material was evaluated and characterized.

EG/paraffin CPCM with shape stability and enhanced thermal conductivity were prepared by the impregnation method and then finished on the surface of cotton fabric with coating technology. The microstructure, crystal structure, chemical composition, latent heat property and thermal conductivity were analyzed by scanning electron microscope, x-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimeter and thermal constant analyzer. The photo-thermal effect of the coated fabric was studied by a thermal infrared imager.

CPCM prepared with a mass ratio of EG to paraffin of 1:8 showed excellent shape stability and low paraffin leakage rate. The latent heat of the CPCM was 51.6201 J/g and the thermal conductivity coefficient was increased by 11.4 times compared with the mixed paraffin. After the CPCM was coated on the surface of the cotton fabric, the light-to-heat conversion rate of the C-EG/PA3 sample was improved by 86.32% compared with the original fabric. In addition, the coated fabric showed excellent thermal stability and heat storage performance in the thermal cycling test.

EG can improve the shape stability and thermal conductivity of paraffin but will reduce the latent heat energy.

The method developed provided a simple and practical solution to improving the thermal regulation performance of fabrics.

Combining paraffin wax with fabrics in a composite way is innovative and has certain applicability in improving the thermal properties of fabrics.

The purpose of this study is to analyze heat transfer for solid–liquid phase change in two inclined cavities assisted with open cell and closed cell porous structures for enhancement of heat transfer and compare them.

The heat transfer analysis is done numerically. The set of conservation equations for mass, momentum and energy for phase change material (PCM) and conduction heat transfer equation for metal frame are solved. Furthermore, temperature and solid–liquid fraction distributions for a cavity filled only with PCM are also obtained for comparison. The porosity is 0.9 for both porous structures. Rayleigh number and inclination angle change from 1 to 10⁸, and from −90° to 90°, respectively.

The present study reveals that the use of closed cell structures not only can make phase change faster than open cell structure (except for Ra = 10⁸ and = 90°) but also provide more stable process. The use of a closed cell porous structure in a cavity with PCM can reduce melting period up to 55% more than a cavity with an open cell porous structure. The rate of this additional enhancement depends on Rayleigh number and inclination angle.

To the best of the authors’ knowledge, this is the first time that the comparison between closed cell and open cell porous structures for heat transfer enhancement in a solid/liquid phase change process is reported. Authors believe that the present study will lead more attentions on the use of closed cell porous structures.

The purpose of this paper is to analyze the performance of a data center and thermal management by using phase change material (PCM). Numerical studies were conducted for two dimensional model of data center and installation of PCM at different locations.

Finite volume method was used for the unsteady problem, while impacts of air velocity and PCM location on the flow field, thermal pattern variations and phase change dynamics were evaluated. Three different locations of the PCM were considered while air velocity was also varied during the simulation. Thermal field variations and cooling performance of the system for different PCM location scenarios were compared.

It was observed that the installation of the PCM has significant impacts on the vortex formation, thermal field variation within the system and its performance. The left, right and top wall installation of the PCM changed the thermal patterns near the heat cell of the data centre. The phase change process is fast for the upper wall installation of the PCM, while the discrepancy of the melt fraction dynamics between different air flow at this position is minimum. The case where PCM placed in the upper wall at the highest air velocity is the best configuration in terms of heat storage. The utilization of PCM and changing its locations provide an excellent tool for thermal management and cooling performance of data centre.

Results of this study can be used for initial design and optimization of cooling systems for thermal management of data centers while the importance of the high-performance computing becomes very crucial for the advanced simulations in different technological applications.

This paper aims to investigate melting heat transfer of a non-Newtonian phase change material (PCM) in a cylindrical enclosure-space between two tubes using a deformed mesh method.

Metal foam porous layers support the inner and outer walls of the enclosure. The porous layers and clear space of the enclosure are filled with PCM. The natural convection effects during the phase change are taken into account, and the governing equations for the molten region and solid region of the enclosure are introduced. The governing equations are transformed into non-dimensional form and then solved using finite element method. The results are compared with the literary works and found in good agreement. The non-Newtonian effects on the phase change heat transfer and melting front are studied.

The results show that the increase of non-Newtonian effects (the decrease of the power-law index) enhances the heat melting process in the cavity at the moderate times of phase change heat transfer. The temperature gradients in porous metal foam over the hot wall are small, and hence, the porous layer notably increases the melting rate. When the melting front reaches the cold porous layer, strong non-linear behaviors of the melting front can be observed.

The phase change heat transfer of non-Newtonian fluid in a cylindrical enclosure partially filled with metal foams is addressed for the first time.

This paper aims to study the synergistic effect of graphene sponge on the thermal properties and shape stability of composite phase change material (PCM).

Graphene oxide sponge is first prepared from an aqueous solution of graphene oxide by freeze-drying method. The oxidized graphene sponge is reduced by hydrazine hydrate. Finally, use vacuum impregnation method to introduce paraffin into graphene sponge to prepare composite PCM.

Graphene sponge is used to improve the shape stability of paraffin wax and improves the thermal conductivity and latent heat of the composite PCM. The thermal conductivity increases by 200 per cent and the composite PCM has excellent reliability in 100 melt-freezing cycles.

A simple way for fabricating composite PCM with high thermal conductivity and latent heat which has the potential to be used as thermal storage materials without container encapsulation has been developed by using graphene sponge and paraffin.

The materials and preparation methods with special structure and properties in this paper provide a new idea for the research of PCM, which can be widely used in the fields of energy conversion and storage.

The purpose of this study is to improve the thermal management of lithium-ion batteries. The phase change material (PCM) cooling does not require additional equipment to consume energy. To improve the heat dissipation capacity of batteries, fins are added in the PCM to enhance the heat transfer process.

Computational fluid dynamics method is used to study the influence of number of vertical fins and ring fins (i.e. 2, 4, 6 and 8 vertical fins, and 2, 3, 4 and 5 ring fins) and the combination of them on the cooling performance.

The battery maximum temperature can be decreased by the PCM with vertical or ring fins, and it can be further decreased by the combination of them. The PCM with eight vertical fins and five ring fins reduces the battery maximum temperature by 5.21 K. In addition, the temperature and liquid-phase distributions of the battery and PCM are affected by the design of the cooling system.

This work can provide guidelines for the development of new and efficient PCM cooling systems for lithium-ion batteries.

The combination of PCM and fins can be used to reduce the battery maximum temperature and temperature difference.