Search results

This study is intended to motivate and guide future researchers to rethink and update their theories of operational capability development. By examining the extensive body of research on operational capabilities and working closely with an industry partner, the authors are iteratively developing new thinking about why our existing models seem to be failing and what aspects are likely to be useful in updating them.

This pathway paper is based on observations gained through a structured literature review, close collaboration with an industry partner and discussions with other industry partners and executives.

The authors identify ways in which the operations management community could begin to challenge and expand existing models of operational capability development. They provide reflections on the network structure of operational capabilities, i.e. their interconnectedness and interactions, which are likely to evolve dynamically over time and have not yet been part of the authors’ thinking about operational capability development.

The authors hope to stimulate new research through this pathway paper. By synthesizing their existing knowledge of operational capabilities and collaborating with an industry partner, the authors have attempted to highlight their limited knowledge of capability development. In addition, the authors offer several opportunities to rethink their existing models.

Globalization and the importance of emerging markets have increased the pressure of high-cost manufacturing locations to sustain operations. However, there are still some countries in which manufacturing is prospering despite high costs (like Germany, Sweden and Switzerland). This study examines seven competitive priorities through 24 different capabilities, using a case survey of four manufacturing companies located in Sweden. This study aims to develop a contemporary understanding from vital priorities and capabilities.

A case survey was conducted in four different-sized manufacturing companies in Sweden during the autumn of 2018. In total, the survey attracted 89 responses. Respondents were mainly middle managers and other management team members.

In general, companies assess the importance of manufacturing capabilities higher than performance and improvement. The authors’ analysis shows that quality priority through product and process capabilities is ranked highest in terms of importance, performance and improvement. In addition, delivery capability shows a similarity with quality. At the other end, being lowest ranked are typically different flexibility and advertising capabilities. This study demonstrates with correlation analysis that most often capabilities have a positive correlation in terms of their importance, performance and improvement needs. Some capabilities show potential correlations across importance, performance and improvement.

This research is limited to one high-cost environment and to four companies within that environment. Further research should examine the impact of the pandemic era on manufacturing priorities and capabilities.

In general, case surveys have relatively rarely been used in management studies. This research offers an alternative and deeper perspective from high-cost country manufacturing, as the responses are from numerous persons in management positions.

The existing literature expresses a strong need to develop tools that support the manufacturing reshoring decision-making process. This paper aims to examine the suitability of analytical hierarchy process (AHP)-based tools for initial screening of manufacturing reshoring decisions.

Two AHP-based tools for the initial screening of manufacturing reshoring decisions are developed. The first tool is based on traditional AHP, while the second is based on fuzzy-AHP. Six high-level and holistic reshoring criteria based on competitive priorities were identified through a literature review. Next, a panel of experts from a Swedish manufacturing company was involved in the overall comparison of the criteria. Based on this comparison, priority weights of the criteria were obtained through a pairwise analysis. Subsequently, the priority weights were used in a weighted-sum manner to evaluate 20 reshoring scenarios. Afterwards, the outputs from the traditional AHP and fuzzy-AHP tools were compared to the opinions of the experts. Finally, a sensitivity analysis was performed to evaluate the stability of the developed decision support tools.

The research demonstrates that AHP-based support tools are suitable for the initial screening of manufacturing reshoring decisions. With regard to the presented set of criteria and reshoring scenarios, both traditional AHP and fuzzy-AHP are shown to be consistent with the experts' decisions. Moreover, fuzzy-AHP is shown to be marginally more reliable than traditional AHP. According to the sensitivity analysis, the order of importance of the six criteria is stable for high values of weights of cost and quality criteria.

The limitation of the developed AHP-based tools is that they currently only include a limited number of high-level decision criteria. Therefore, future research should focus on adding low-level criteria to the tools using a multi-level architecture. The current research contributes to the body of literature on the manufacturing reshoring decision-making process by addressing decision-making issues in general and by demonstrating the suitability of two decision support tools applied to the manufacturing reshoring field in particular.

This research provides practitioners with two decision support tools for the initial screening of manufacturing reshoring decisions, which will help managers optimize their time and resources on the most promising reshoring alternatives. Given the complex nature of reshoring decisions, the results from the fuzzy-AHP are shown to be slightly closer to those of the experts than traditional AHP for initial screening of manufacturing relocation decisions.

This paper describes two decision support tools that can be applied for the initial screening of manufacturing reshoring decisions while considering six high-level and holistic criteria. Both support tools are applied to evaluate 20 identical manufacturing reshoring scenarios, allowing a comparison of their output. The sensitivity analysis demonstrates the relative importance of the reshoring criteria.

Machine learning (ML) analytical tools are increasingly being considered as an alternative quantitative methodology in management research. This paper proposes a new approach for uncovering the antecedents behind product and product–service innovation (PSI).

The ML approach is novel in the field of innovation antecedents at the country level. A sample of the Equatorian National Survey on Technology and Innovation, consisting of more than 6,000 firms, is used to rank the antecedents of innovation.

The analysis reveals that the antecedents of product and PSI are distinct, yet rooted in the principles of open innovation and competitive priorities.

The analysis is based on a sample of Equatorian firms with the objective of showing how ML techniques are suitable for testing the antecedents of innovation in any other context.

The novel ML approach, in contrast to traditional quantitative analysis of the topic, can consider the full set of antecedent interactions to each of the innovations analyzed.

This paper analyses the way that the industry's competitive environment and the company's strategy influence the implementation of the supply chain's (SC’s) triple-A capabilities (agility, adaptability and alignment). Two competitive environment variables are analysed: competitive intensity of the industry and complexity of the SC. Two opposing competitive strategies are also considered: cost and differentiation.

The hypotheses have been tested using data gathered via a questionnaire given to 277 Spanish manufacturing companies, and structural equation modelling has been used for the analysis.

The results show that competitive intensity is the most influential factor followed by business strategy. SC complexity does not seem to affect agility. Moreover, although the competitive environment variables affect the business strategy, the latter has no mediating effects between the competitive environment and SC agility, adaptability and alignment capabilities.

This study presents new insights into the environmental and strategic drivers linked to the implementation of SC agility, adaptability and alignment capabilities and offers guidelines to managers involved in SC management.

本文分析產業的競爭環境和公司的策略如何影響供應鏈三A能力 (靈活性、適應能力和調整能力) 的實現。兩個競爭環境變數被分析, 就是產業的競爭強度和供應鏈的複雜性。同時, 兩個對立的競爭策略也被探討,就是價格和差異化。

各個假設均以數據測試; 數據取自277間西班牙製造商囘應之問卷, 分析則以結構方程模型進行。

研究結果顯示、競爭強度是最重要的影響因素, 其次是經營策略。供應鏈的複雜性似乎對靈活性沒有影響; 而且, 雖然競爭環境變數影響著經營策略, 但經營策略在競爭環境與供應鏈靈活性、適應能力和調整能力之間沒有起仲介效果。

本研究就環境和策略如何驅動供應鏈靈活性、適應能力和調整能力方面提供了新的啓示, 亦為負責供應鏈管理的主管提供了指引。

The purpose of this paper is to know which growth-impeding constraints are perceived to act upon operations of small- to medium-sized (SME) companies by their owner-managers and to recommend transitionary paths to elevate constraints and increase contribution levels made by SMEs’ operations. To do so, this research has been primarily founded upon Hayes et al.’s (2005) operations contribution model for differentiating between different levels of operations’ contribution, and secondarily on the theory of constraints philosophy to explain the perceptions of constraints found at each level – current and future.

An open-ended survey and a series of group workshops have gathered new empirical data about these perceptions, which were coded using the relational content analysis to identify a parsimonious set of perceptual growth-impeding constraint categories. The most popular transitions were identified and a correlation of frequency rank orders between “perceived current” and “perceived future” constraints categories was calculated, and likely transitionary paths for growth are discussed. Three SME case studies were documented in related action research to contextualise survey findings.

The most popular transition was from “neutral” to “leading”. A lack of people capability was perceived to be the most commonly reported growth-impeding constraint category, followed by a combined lack of process competence and product and service innovation, further followed by a lack of skills in information technology automation. In addition, a new conceptual model has been generated inductively to address shortcomings found in the original operations contribution model (Hayes et al., 2005) during its application to UK SMEs. The new model is referred to in this paper as the “Operations Growth Rocket”.

This research only used data from UK SMEs.

This work should help SME owner-managers to overcome growth-impeding constraints that act upon their operations and assist them to develop more effective actions and paths to increase the contribution levels made by their operations. This in turn should support growth of their organisations. Findings will also inform teaching about more effective operations management in SMEs.

This work should help UK SMEs to grow, which in turn will strengthen the UK economy.

A novel approach and new data from 208 SMEs modify a classical operations contribution model (Hayes et al., 2005). This is achieved by considering transitionary paths to be meta-categories continua abstracted from constraint categories combined with case data for moving towards higher levels of operations contribution, rather than using discrete growth-impeding and growth-constraining “levels”. This research has inductively generated a new version of the classical contribution model that should be more suitable for stimulating growth in (UK) SMEs.

Technology and market pressures are encouraging localized and small-series production in customer-driven industries. The purpose of this paper is to explore and understand the supply chain-, product- and process-design factors for small-series production in EU’s textile and apparel industry, to understand configuration decisions, priorities and challenges.

An interview study was undertaken with ten companies that represent diverse small-series production models and value chain roles. Interview data was analysed to identify supply network configuration characteristics, decision priorities and challenges.

Three small-series production models emerged from the analysis, differing with respect to adoption of process postponement and customization. The findings confirm and extend past research regarding diverse decision priorities and product, process, supply chain structure/relationship configurations. Challenges identified relate to planning (priorities) and implementation (configuration). Whereas competence availability and digital technology challenges are common, several difficulties are linked to production model like tensions related to priorities and small volumes, which are not found with customization.

Future research can make comparisons with other industry and location contexts; adopt dynamic approaches to distinguish between design and reconfiguration processes; and address indicated paradoxical-tensions.

The study findings can provide guidance for companies regarding identification of priorities and management of (planning/implementation) challenges impacting small-series production in T&A.

The paper brings a configuration perspective at the supply chain level to the problem of small-series production implementation, which demands holistic and context-specific understanding.

Defence supply chains (SCs) aim at operational outcomes, and armed forces depend on them to provide availability and preparedness in peace and sustainability in war. Previous research has focussed on strategies for SCs aiming at financial outcomes. This raises the question of how suitable commercial supply chain strategies (SCSs) are for supply chain design (SCD) in defence. The purpose of this paper is to explain the constructs of SCSs that satisfy military operational requirements and to propose SCSs that are appropriate in defence.

This paper reports on a Delphi study with 20 experts from Swedish defence authorities. Through three Delphi rounds, two workshops and a validation round, these experts contributed to the reported findings.

The findings demonstrate that commercial SC constructs are acceptable and applicable in defence but not sufficient. An additional strategy is required to satisfy requirements on availability, preparedness and sustainability. The paper shows that different requirements in peace and war make it challenging to design suitable defence SCs and proposes eight SCSs that satisfy these requirements.

The results emanate from the Swedish defence context and further research is required for generalisation.

This paper extends theory by investigating SCs aiming at operational outcomes. For managers in companies and defence authorities, it explicates how the unique issues in defence must influence SCD to satisfy operational requirements.

The purpose of this paper is to explore the relationship between supply chain management practices, logistics capabilities, logistics integration and competitive advantage of Small and Medium Enterprises (SMEs) in a developing country.

Using a structured questionnaire survey, cross-sectional data collected from 204 SMEs in Kampala – Uganda were analysed using exploratory and confirmatory factor analysis, and Structural Equation Modelling (SEM) using AMOS version 26 to validate the theorised relationships.

The study findings revealed that both supply chain management practices and logistics integration are positively and significantly associated with competitive advantage. Also, both supply chain management practices and logistics capabilities are positively and significantly associated with logistics integration. Additionally, the authors found that logistics integration partially mediates in the relationships between supply chain management practices and competitive advantage, and logistics capabilities and competitive advantage. Conclusively, the three independent variables collectively account for 11% variance in competitive advantage of SMEs.

Given the general observation that SMEs are fundamental to socio-economic development, yet resource constrained, this study uses Resource-based and dynamic capabilities theoretical perspectives to provide an empirical understanding of the supply chain and logistics resources and capabilities necessary for building competitive advantage of SMEs in the context of a developing economy.

Effective planning requires the participation of different functions and may be hampered by lack of integration and information quality (IQ). This paper aims to investigate the relationships among integration, uncertainty, IQ and performance, in the context of the production planning and control function. The literature lacks in-depth studies that consider these factors altogether, showing how they interact and how they contribute to improve business performance.

The authors introduce the variable of planning performance, which represents the quality of the production plans/planning process and is related to the frequency and causes of modifications to these plans. The relationships among the mentioned constructs are investigated by means of multiple case studies.

The results illustrate that integration is positively related to planning performance, and this relationship is mediated by IQ and moderated by uncertainty.

The presented analysis may help practitioners to foster interfunctional integration, better cope with uncertainty and improve information management, aiming to achieve better planning performance. The managers can choose integration and IQ improvement mechanisms that better fit to their environment/reality, using the four different cases as a benchmark. Moreover, this research contributes to the literature exploring this contingency perspective by means of in-depth case studies, considering that most of the existing research adopting this perspective is survey-based.