Search results

The purpose of this paper is to colour aluminium pigment to the highest chroma using SiO₂ and organic silane with dichlorotriazine reactive dye and investigate its reaction mechanism, chemical stability and thermal properties to improve its applicability in surface coatings.

Aluminium pigment was encapsulated by the catalysed sol-gel method using SiO₂, followed by modification with γ-glycidoxypropyltrimethoxysilane (GPTMS). Purified reactive dye (1-Amino-4-[3-(4,6-dichlorotriazin-2-ylamino)-4-sulfophenylamino]anthraquinone-2-sulfonic acid (X-BR)) was covalently immobilized onto modified SiO₂ to obtain coloured aluminium pigment. The reaction mechanism, chemical stability and thermophysical properties were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscope, transmission electron microscope and thermogravimetric analyses (TGA).

The results showed that X-BR was covalently attached to modified Al/SiO₂ with maximum colour grafting of 95 per cent when the dosage of GPTMS and X-BR per weight of modified Al/SiO₂ was 25 and 15 per cent, respectively, at pH 8.5 and a temperature of 40°C. The coloured aluminium pigment had good chemical stability with excellent anti-migration properties in many solvents.

The organic silane used required a careful control of pH to ensure maximum colour grafting efficiency meanwhile other silanes with amine groups could also be used effectively with different kinds of colorants besides reactive dyes.

The method used is less cumbersome and provides a simple route to preparing coloured aluminium pigment.

The use of organic-inorganic SiO₂/γ- GPTMS with purified reactive dye to covalently colour aluminium pigment to the highest chroma is novel and will help advance the frontiers of knowledge on coloration of aluminium pigments.

The purpose of this study is to evaluate the role of encapsulation pH and iron source on the anchorage mode and performance of iron oxide-encapsulated aluminium pigments.

The coloured waterborne aluminium pigments were prepared at pH 5-7.5 by using FeSO₄ and FeCl₃ as iron source. The anchorage mode of iron oxides on aluminium was characterized using optical microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Furthermore, the pigmentary performance was characterized through anticorrosion test and multi-angle spectroscopy.

Diaspore and boehmite could form from H₂O₂ oxidizing aluminium. Both low pH and FeSO₄ systems are beneficial for diaspore, inducing green rust anchor on the aluminium to form goethite. Either in FeSO₄ or FeCl₃ system, slightly high pH is beneficial for the formation of boehmite, which occurred together with ferrihydrite to form denser coating with yellowness and excellent anticorrosion property. At pH above 7, the formation of dendritic iron oxide is detrimental to the anticorrosion property and the glossiness.

Only FeSO₄·7H₂O and FeCl₃·6H₂O as iron sources were explored.

The investigation results provide theoretical basis to obtain excellent chromatic waterborne aluminium pigments.

The method for investigation of encapsulation mechanism by surveying the structure of iron oxides on aluminium, which varies with the pH of the system and iron sources, is novel.

Now being marketed in the UK by Cetema Ltd are the Nafturan 2000 series of potting resins for protecting electrical and electronic components against humidity. The Nafturan 2000 products are solvent‐free two‐component resins based on polyurethane elastomer. They can be cured at room temperature to give a flexible and reliable protective barrier resin which is completely resistant to humidity.

In part one the various properties of this important metallic pigment are considered.

Several solid solution combinations of aluminium oxide and iron oxide, for the preparation of a new pigment, were investigated to study the effect of aluminium oxide to iron oxide ratio on various properties of the resulting pigments.

The conditions for the preparation of the pigments via solid solution interaction at 1,000°C had been estimated. Characterisation of three different combinations of aluminium oxide and iron oxide were carried out using spectroscopic methods of analysis via X‐ray diffraction (XRD), transmission and scanning electron microscopy (TEM and SEM). Also, evaluation of the pigments prepared, in terms of oil absorption, specific gravity, water‐soluble matter, and pH, using international standard testing methods was performed. The pigments prepared were incorporated in anticorrosive paint formulations based on medium oil alkyd resin as a binder. The physico‐mechanical properties of the relevant paint films were obtained, while their anticorrosive properties were assessed by tests in 3.5 per cent NaCl solution for 28 days.

The results showed that the anticorrosive protection properties of the pigment prepared were better than their aluminium and iron counterparts.

The pigments prepared may be used in different applications other than paint formulations. As the concentration of iron oxide increases, the hardness and the anticorrosive protection performance of the paint film increase. As the concentration of aluminium increases, elasticity, impact resistance and ductility also increase. Application of different combinations of these pigments in paint films had been studied. However, investigation of the application of these pigments in other systems such as plastics could also be interesting.

The pigments prepared can be used as reinforcing filler in different rubber and plastic composites, beside its ferro‐magnetic properties. As the concentration of alumina increased, the reinforcing and magnetic effects decreased and vice versa.

Iron oxide is an abundant ore in several world countries; it is an inorganic, environmentally friendly material, which exhibits good Moh's hardness. Adding aluminium oxide which is a very light element having a unique flaky structure to iron oxide gave a new pigment that can be used not only in paint formulations, but also in rubber and plastic composites as reinforcing fillers.

The purpose of this paper is to conduct the directed synthesis of blue-colour aluminate spinel pigments based on spent aluminium–cobalt–molybdenum (ACM) catalyst and to study peculiar features of mineral formation processes and changes in their colour indices depending on composition and firing temperature.

Aluminate spinel ceramic pigments with specified colour indices were synthesised by directed formation of their mineral composition and identification of the most rational technological parameters of production. Mineral composition of synthesised pigments was evaluated by X-ray phase analysis. The colour indices of pigments and pigment-containing glaze coatings were studied on the comparator colour. The chemical resistance of pigments was determined by loss of their weight loss after boiling in 1 N hydrochloric acid solution and 1 N sodium hydroxide solution.

Peculiar features of formation of the mineral composition of aluminate spinel pigments based on the ACM catalyst were studied. The expediency of using magnesium and zinc oxides in their composition has been proved. It is found that for the formation of stable pigments of intense blue colour, a concentration of cobalt (II) oxide in the amount of 0.5 mol is sufficient, which is 23.1 Wt.%. The colour of such pigments is determined by the ratios of cobalt, magnesium and zinc aluminates, which form a spinel solid solution.

The use of developed aluminate spinel pigments provides obtaining of high-quality glass coatings of blue colour, in particular, for ceramics.

Aluminium oxide in the spent ACM catalyst is predominantly in the active form (of amorphous aluminium hydroxide and y-Al₂O₃). This is a prerequisite for the use of this waste material as a complete substitute for chemically pure Al₂O₃ in the technology of aluminate spinel pigments and reduction of their firing temperature. Besides, spent ACM catalyst already contains 5 Wt.% of expensive cobalt (II) oxide in the form of stable colour-bearing phase CoAl₂O₄.

A new method for modifying the properties of aluminium oxide had been developed which allowed alumina to be used as a white, reinforcing filler in various rubber composites to replace carbon black, producing high performance white rubber vulcanizates comparable to those loaded with carbon black that could be coloured if needed.

Alumina was treated with small amounts of ammonium molybdate. Characterisation of modified aluminium oxide was carried out using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Also, evaluation of the pigments prepared, in terms of oil absorption, specific gravity, and bulking value using international standard testing methods was performed. The morphology of the natural rubber composites loaded with the new modified alumina were studied using SEM. Kraus equation was used to analyse the extent of polymer‐pigment interaction, while Mooney‐Rivlin relation was employed to study the near equilibrium stress‐strain behaviour.

The results showed that, the pigment had a significant effect on the rheological characteristics (scorch, cure time, etc.), mechanical properties, stress and strain at yield and at rupture of white rubber vulcanizates prepared resulting in high performance.

As concentration of molybdenum oxide increased in the alumina crystals, the reinforcing effect in rubber composites also increased till an optimum concentration where such a reinforcing effect reversed. However, investigation of the application of these pigments in other systems such as an anticorrosive pigment in paint formulations and reinforcing filler in polyester composites could also be interesting.

The pigments prepared could be used as reinforcing filler in plastic composites and also as anticorrosive pigment in paint formulations.

Aluminium oxide is a cheap compound. The originality of the work lay in the finding that by adding trace amounts of molybdenym to it, aluminium oxide's properties changed dramatically resulting in more effective action in reinforcing rubber composites filled with such modified alumina, producing white rubber composites with comparable properties to those loaded with carbon black, and may exceed them in some cases. This allowed the preparation of coloured rubber with good rheological and physical properties.

There are many pigment grades varying in manufacturing processes and product specifications. However, the most common denominator for which prices can be compared is the covering power or specific surface area of pigments. Pigments with higher surface area command a higher price, reflecting a longer milling time and increased production and labour costs.

The purpose of this paper is to enhance the anticorrosion property of aluminium pigments and to improve their compatibility with polymers in coating.

Aluminium pigments encapsulated by organic‐inorganic layer were prepared by hydrolysis and condensation of organic silane acrylate resin and tetraethoxy silane (TEOS) on the surface of pigments via sol‐gel method. TEOS and poly (methyl methacryalte‐n‐butyl acrylate‐vinyl triethoxysilane) (PMBV) formed in advance by co‐polymerisation of methyl methacrylate (MMA), n‐butyl acrylate (BA) and vinyl triethoxysilane (VTES) were used as precursors. The adhesion property of the aluminium pigments was measured by peel test, and the loss of silvery appearance after encapsulation and acid soaking were both evaluated by colour lightness difference (ΔL) measurement. The encapsulated aluminium pigments were further characterised by means of FTIR, SEM, TG and XPS.

It was found that PMBV‐SiO2 thin films could be formed on the surface of aluminium pigments smoothly and uniformly, and the adhesion and anticorrosion performances of encapsulated aluminium pigments were improved significantly.

The organic silane acrylate resin used as a precursor in the sol‐gel process could be synthesised from other aclyate monomers. In addition, the hydrolysis and condensation mechanism of organic silane acrylate resin on the surface of aluminium pigments need further studies.

The method developed provided a good solution to the two problems of aluminium pigments and increased their application values.

The method of improving adhesion and anticorrosion properties of aluminium pigments was novel and could find numerous applications in surface coatings and adhesives.

The purpose of this work is to study the patterns of pigment colour formation and to develop metal compositions for obtaining spinels using the precipitation and heat treatment methods.

Precursor materials were prepared using co-precipitation method. Phase composition of pigments were determined by X-ray diffraction. Colour of pigments was determined spectrophotometry. Modelling of colour formation was performed using simplex method. Planning in the future to carry out full synthesis of pigments of blue, red and yellow colours.

The paper deals with the results of theoretical and experimental research on the synthesis pigments of blue, red and yellow colours based on Fe-Co-Al-O spinel. The influence of the chromophore cation content and the heat treatment temperature on optical and colour characteristics of pigments were studied.

The resulting composition-property diagrams make it possible to evaluate the effect of chromophore cations and heat treatment on the colour formation for Fe₂O₃-Al₂O₃-CoO system. Crystal-phase composition of the pigments is installed and its relationship with the optical colour characteristics. That makes it possible carry out targeted synthesis of pigments blue, red and yellow colours in further. The phase composition of pigments and its relationship with optical and colour properties has been established thus enabling the directed synthesis of blue, red and yellow pigments.