Search results

This paper aims to propose an enhanced densely dehazing network to suit railway scenes’ features and improve the visual quality degraded by haze and fog.

It is an end-to-end network based on DenseNet. The authors design enhanced dense blocks and fuse them in a pyramid pooling module for visual data’s local and global features. Multiple ablation studies have been conducted to show the effects of each module proposed in this paper.

The authors have compared dehazed results on real hazy images and railway hazy images of state-of-the-art dehazing networks with the dehazed results in data quality. Finally, an object-detection test is taken to judge the edge information preservation after haze removal. All results demonstrate that the proposed dehazing network performs better under railway scenes in detail.

This study provides a new method for image enhancing in the railway monitoring system.

This paper aims to investigate the feasibility of adding macro-textures to triangle meshes for additive manufacturing (AM) focusing on possible time and quality issues in both software processing and part fabrication.

A demonstrative software tool was developed to apply user-selected textures to existing meshes. The computational procedure is a three-dimensional extension of the solid texturing method used in computer graphics. The tool was tested for speed and quality of results, considering also the pre- and post-processing operations required. Some textured meshes were printed by different processes to test build speed and quality.

The tool can handle models with realistic complexity in acceptable computation times. Parts are built without difficulties or extra-costs achieving a good aesthetic yield of the texture.

The tool cannot reproduce sample patterns but requires the development of a generation algorithm for different type of textures. Mesh processing operations may take a long time when very fine textures are added to large parts.

Direct texturing can help obtain parts with aesthetic or functional textures without the need for surface post-treatments, which can be especially difficult and expensive for plastic parts.

The proposed method improves the uniformity and consistency of textures compared to existing approaches, and can support future systematic studies on the detail resolution of AM processes.

Many additively manufactured parts suffer from reduced interlayer strength. This anisotropy is necessarily tied to the orientation during manufacture. When individual features on a part have conflicting optimal orientations, the part is unavoidably compromised. This paper aims to demonstrate a strategy in which conflicting features can be functionally separated into “co-parts” which are individually aligned in an optimal orientation, selectively reinforced with continuous fiber, printed simultaneously and, finally, assembled into a composite part with substantially improved performance.

Several candidate parts were selected for co-part decomposition. They were printed as standard fused filament fabrication plastic parts, parts reinforced with continuous fiber in one plane and co-part assemblies both with and without continuous fiber reinforcement (CFR). All parts were loaded until failure. Additionally, parts representative of common suboptimally oriented features (“unit tests”) were similarly printed and tested.

CFR delivered substantial improvement over unreinforced plastic-only parts in both standard parts and co-part assemblies, as expected. Reinforced parts held up to 2.5x the ultimate load of equivalent plastic-only parts. The co-part strategy delivered even greater improvement, particularly when also reinforced with continuous fiber. Plastic-only co-part assemblies held up to 3.2x the ultimate load of equivalent plastic only parts. Continuous fiber reinforced co-part assemblies held up to 6.4x the ultimate load of equivalent plastic-only parts. Additionally, the thought process behind general co-part design is explored and a vision of simulation-driven automated co-part implementation is discussed.

This technique is a novel way to overcome one of the most common challenges preventing the functional use of additively manufactured parts. It delivers compelling performance with continuous carbon fiber reinforcement in 3D printed parts. Further study could extend the technique to any anisotropic manufacturing method, additive or otherwise.

Terrestrial laser scanning (TLS) point clouds have been widely used in deformation measurement for structures. However, reliability and accuracy of resulting deformation estimation strongly depends on quality of each step of a workflow, which are not fully addressed. This study aims to give insight error of these steps, and results of the study would be guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds. Thus, the main contributions of the paper are investigating point cloud registration error affecting resulting deformation estimation, identifying an appropriate segmentation method used to extract data points of a deformed surface, investigating a methodology to determine an un-deformed or a reference surface for estimating deformation, and proposing a methodology to minimize the impact of outlier, noisy data and/or mixed pixels on deformation estimation.

In practice, the quality of data point clouds and of surface extraction strongly impacts on resulting deformation estimation based on laser scanning point clouds, which can cause an incorrect decision on the state of the structure if uncertainty is available. In an effort to have more comprehensive insight into those impacts, this study addresses four issues: data errors due to data registration from multiple scanning stations (Issue 1), methods used to extract point clouds of structure surfaces (Issue 2), selection of the reference surface S_ref to measure deformation (Issue 3), and available outlier and/or mixed pixels (Issue 4). This investigation demonstrates through estimating deformation of the bridge abutment, building and an oil storage tank.

The study shows that both random sample consensus (RANSAC) and region growing–based methods [a cell-based/voxel-based region growing (CRG/VRG)] can be extracted data points of surfaces, but RANSAC is only applicable for a primary primitive surface (e.g. a plane in this study) subjected to a small deformation (case study 2 and 3) and cannot eliminate mixed pixels. On another hand, CRG and VRG impose a suitable method applied for deformed, free-form surfaces. In addition, in practice, a reference surface of a structure is mostly not available. The use of a fitting plane based on a point cloud of a current surface would cause unrealistic and inaccurate deformation because outlier data points and data points of damaged areas affect an accuracy of the fitting plane. This study would recommend the use of a reference surface determined based on a design concept/specification. A smoothing method with a spatial interval can be effectively minimize, negative impact of outlier, noisy data and/or mixed pixels on deformation estimation.

Due to difficulty in logistics, an independent measurement cannot be established to assess the deformation accuracy based on TLS data point cloud in the case studies of this research. However, common laser scanners using the time-of-flight or phase-shift principle provide point clouds with accuracy in the order of 1–6 mm, while the point clouds of triangulation scanners have sub-millimetre accuracy.

This study aims to give insight error of these steps, and the results of the study would be guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds.

The results of this study would provide guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds. A low-cost method can be applied for deformation analysis of the structure.

Although a large amount of the studies used laser scanning to measure structure deformation in the last two decades, the methods mainly applied were to measure change between two states (or epochs) of the structure surface and focused on quantifying deformation-based TLS point clouds. Those studies proved that a laser scanner could be an alternative unit to acquire spatial information for deformation monitoring. However, there are still challenges in establishing an appropriate procedure to collect a high quality of point clouds and develop methods to interpret the point clouds to obtain reliable and accurate deformation, when uncertainty, including data quality and reference information, is available. Therefore, this study demonstrates the impact of data quality in a term of point cloud registration error, selected methods for extracting point clouds of surfaces, identifying reference information, and available outlier, noisy data and/or mixed pixels on deformation estimation.

Surveillance is the emerging concept in the current technology, as it plays a vital role in monitoring keen activities at the nooks and corner of the world. Among which moving object identifying and tracking by means of computer vision techniques is the major part in surveillance. If we consider moving object detection in video analysis is the initial step among the various computer applications. The main drawbacks of the existing object tracking method is a time-consuming approach if the video contains a high volume of information. There arise certain issues in choosing the optimum tracking technique for this huge volume of data. Further, the situation becomes worse when the tracked object varies orientation over time and also it is difficult to predict multiple objects at the same time. In order to overcome these issues here, we have intended to propose an effective method for object detection and movement tracking. In this paper, we proposed robust video object detection and tracking technique. The proposed technique is divided into three phases namely detection phase, tracking phase and evaluation phase in which detection phase contains Foreground segmentation and Noise reduction. Mixture of Adaptive Gaussian (MoAG) model is proposed to achieve the efficient foreground segmentation. In addition to it the fuzzy morphological filter model is implemented for removing the noise present in the foreground segmented frames. Moving object tracking is achieved by the blob detection which comes under tracking phase. Finally, the evaluation phase has feature extraction and classification. Texture based and quality based features are extracted from the processed frames which is given for classification. For classification we are using J48 ie, decision tree based classifier. The performance of the proposed technique is analyzed with existing techniques k-NN and MLP in terms of precision, recall, f-measure and ROC.

With the help of basic physics, the application of computer algorithms in the form of recent advances such as machine learning and neural networking in textile Industry has been discussed in this review. Scientists have linked the underlying structural or chemical science of textile materials and discovered several strategies for completing some of the most time-consuming tasks with ease and precision. Since the 1980s, computer algorithms and machine learning have been used to aid the majority of the textile testing process. With the rise in demand for automation, deep learning, and neural networks, these two now handle the majority of testing and quality control operations in the form of image processing.

The state-of-the-art of artificial intelligence (AI) applications in the textile sector is reviewed in this paper. Based on several research problems and AI-based methods, the current literature is evaluated. The research issues are categorized into three categories based on the operation processes of the textile industry, including yarn manufacturing, fabric manufacture and coloration.

AI-assisted automation has improved not only machine efficiency but also overall industry operations. AI's fundamental concepts have been examined for real-world challenges. Several scientists conducted the majority of the case studies, and they confirmed that image analysis, backpropagation and neural networking may be specifically used as testing techniques in textile material testing. AI can be used to automate processes in various circumstances.

This research conducts a thorough analysis of artificial neural network applications in the textile sector.

The visualization of ranking information in global public policy is moving away from traditional “league table” formats and toward dashboards and interactive data displays. This paper explores the rhetoric underpinning the visualization of ranking information in such interactive formats, the purpose of which is to encourage country participation in reporting on the Sustainable Development Goals. The paper unpacks the strategies that the visualization experts adopt in the measurement of global poverty and wellbeing, focusing on a variety of interactive ranking visualizations produced by the OECD, the World Bank, the Gates Foundation and the ‘Our World in Data’ group at the University of Oxford. Building on visual and discourse analysis, the study details how the politically and ethically sensitive nature of global public policy, coupled with the pressures for “decolonizing” development, influence how rankings are visualized. The study makes two contributions to the literature on rankings. First, it details the move away from league table formats toward multivocal interactive layouts that seek to mitigate the competitive and potentially dysfunctional pressures of the display of “winners and losers.” Second, it theorizes ranking visualizations in global public policy as “alignment devices” that entice country buy-in and seek to align actors around common global agendas.

The paper aims to solve the problem of personnel intrusion identification within the limits of high-speed railways. It adopts the fusion method of millimeter wave radar and camera to improve the accuracy of object recognition in dark and harsh weather conditions.

This paper adopts the fusion strategy of radar and camera linkage to achieve focus amplification of long-distance targets and solves the problem of low illumination by laser light filling of the focus point. In order to improve the recognition effect, this paper adopts the YOLOv8 algorithm for multi-scale target recognition. In addition, for the image distortion caused by bad weather, this paper proposes a linkage and tracking fusion strategy to output the correct alarm results.

Simulated intrusion tests show that the proposed method can effectively detect human intrusion within 0–200 m during the day and night in sunny weather and can achieve more than 80% recognition accuracy for extreme severe weather conditions.

(1) The authors propose a personnel intrusion monitoring scheme based on the fusion of millimeter wave radar and camera, achieving all-weather intrusion monitoring; (2) The authors propose a new multi-level fusion algorithm based on linkage and tracking to achieve intrusion target monitoring under adverse weather conditions; (3) The authors have conducted a large number of innovative simulation experiments to verify the effectiveness of the method proposed in this article.