Search results

This paper aims to examine the recipe for and standard methods of dyeing cotton fabric with natural dyes from jackfruit wood extract. The dyeing of the fabric was performed by immersion it without heating for a short time to obtain the best results.

The dyeing experiment using cotton fabric with jackfruit wood extract was conducted by immersion at room temperature. The independent variables studied were the mordant method, type of mordant, mordant concentration, salt concentration and dyeing pH. The dependent variables were colour strength and colour fastness to washing and rubbing. The orthogonal array L16 (45) was used in the study to obtain the optimal values for each parameter of the response variables. The multi-response signal-to-noise (MRSN) method was used to optimise the five response variables with different quality characteristics so that the best parameters could be obtained based on the highest MRSN ratio value.

The best parameters were obtained at an MRSN value of 4.5254 under A3B3C1D2E4 conditions, namely, the dyeing process with post mordant, aluminium nitrate type mordant, mordant concentration of 10 g/L, salt concentration of 15 g/L and dyeing a pH: of 10. Under these conditions, the value of K/S was obtained at 1.893, colour fastness to washing (GS: 4) and (SS: 4–5), dry rubbing (SS: 5) and wet rubbing (SS: 4–5).

Obtaining a standard recipe and method for dyeing cotton cloth with jackfruit wood extract by immersion without heating is expected to lead to the development of natural dyes, and especially their application on an industrial scale. This standard and method can be used as technical guidelines by industry. The use of aluminum nitrate as a mordant will help achieve optimal dyeing results. The use of polyaluminium chloride (PAC) mordant, which has the potential to produce high colour strength, and papaya fruit sap, which has the capacity to increase colour fastness, still need to be developed to improve the results of natural dyes.

The standard recipe and dyeing method will be able to improve the results of the dyeing of cotton fabrics with natural dyes. Short immersion dyeing without heating and the optimal results obtained are the main attractions for their use by the textile/batik industry, as the process is easier and a lower cost. The results of dyeing with dark colours and good colour fastness mean the textile products are of the higher quality demanded by consumers, thereby increasing sales. This will encourage the use of and increase the need for natural dyes by industry, consequently reducing the use of synthetic dyes.

The use of natural dyes, chemical mordant from aluminum salts, and natural mordant from papaya fruit sap in the dyeing process in the textile/batik industry in Indonesia will produce eco-textile and eco-batik products that are environmentally friendly and of high quality. This in turn will increase consumer interest and sales, meaning that the income and economy of workers in the textile industry/crafts sector will also increase. In addition, the use of natural dyes with the selection of a safe mordant (not containing heavy metals) will reduce the use of synthetic dyes, which pollute and damage the aquatic environment.

This study found a standard recipe and method of dyeing cotton fabric with natural dyes from jackfruit wood extracted by immersion without heating for a short time to obtain the best results. In addition, the discovery was of PAC, a new mordant which is effective in the use of natural dyes can give high colour strength to cotton fabric. In addition to the discovery of a new mordant, PAC, which has the potential to produce high colour strength, papaya fruit sap also has the capacity to increase colour fastness with the use of natural dyes from the flavonoid group.

The purpose of this paper is to improve the dye affinity of natural dye of Terminalia chebula retzius (T. chebula) using the dye substrate of leather.

The dyeing conditions such as temperature, concentration of dye, and time are controlled by measuring the dye affinity. The effect of enzymatic post-tanning process on dye affinity is evaluated by using different type of proteases such as flavourzyme, alcalase, and bromelain. The optimum conditions for enzymatic post-tanning process are evaluated depending on different pH, temperature, and concentration of enzyme.

The highest dye affinity was obtained at 50°C using a dye concentration of 200 percent (owf) for 30 min treatment by measuring of K/S values of dyed leather. Distilled water was proved as a better extraction liquid to improve the dye affinity of T. chebula. The K/S values of dyed leather were enhanced after the enzymatic post-tanning process by flavourzyme. Moreover, the fastness properties against the rubbing and dry cleaning of the dyed leather were improved by the enzymatic post-tanning process.

In this paper, the enzymatic post-tanning process is introduced as the method to improve the dye affinity in natural dyeing using Terminalia chebula retzius (T. chebula) applied to leather. The results of the study could be applied for further natural dyeing of leather using various natural dyes.

The majority of the synthetic dyes have been found to be non-biodegradable, toxic and carcinogenic. As a result, there has been a growing trend toward the use of natural dyes as alternates to synthetic dyes. This shift calls for more research to come up with more sources of natural dyes to satisfy their increasing demand. Euclea divinorum plant has been used traditionally as a source of dye, however, its textile dyeing properties have not been studied. This study aims to determine the textile dyeing properties of E. divinorum extract.

Optimization of dyeing conditions of Euclea divinorum natural dye extract on the cotton fabric was done using response surface methodology (RSM). The combined effects of examined dyeing conditions on the relative color strength (K/S) were studied using a central composite experimental design. Analysis of variance (ANOVA) was used to determine the significance of the statistical model generated for the study. Mordanting effects were measured using standard ISO wash, rub and lightfastness tests.

The optimum dyeing conditions were found to be 68 min, pH 3.3 and 82°C with color strength 0.609. Temperature and pH showed some interaction effects during the dyeing experiments. The predicted optimum K/S value was validated experimentally using the optimum conditions and was found to be in agreement with the experimental values. All the metallic mordants used enhanced the color strength and provided a variety of brown shades, therefore, a suitable alternative for the toxic synthetic dyes.

Optimization of dyeing conditions of Euclea divinorum dye on cotton using RSM and mordanting at optimal conditions has not been done elsewhere.

The health and environmental hazards associated with synthetic dyes have led to a revival of natural dyes that are non-toxic, environmentally benign and coupled with various functions. The study aims to investigate and develop the potentiality of a popular herb called Chromolaena odorata (C. odorata) as a sustainable and stable dyestuff in textiles.

Natural colorant extracted from C. odorata leaves is used to dye the worsted fabric, which is one of the premier end-use of wool in fashion, via the padding method associated with pre-, simultaneous and post-mordanting with chitosan, tannic acid and copper sulfate pentahydrate. The effects of extraction, dyeing and mordanting processes on fabric’s color strength K/S and color difference ΔE_CMC are investigated via International Commission on Illumination’s L*a*b* color space, Fourier transform infrared spectroscopy, scanning electron microscope, color fastness to washing, rubbing, perspiration and light.

The results obtained indicate extraction with ethanol 90% with a solid/liquid ratio of 1:5 within 1 h, and coloration with a liquor ratio of 1:5 (pH 5) within 2 h under padding pressure of 0.3 MPa are the most effective for coloring worsted fabric.

The C. odorata’s application as a highly effective dyestuff possessing good colorimetric effectiveness has expanded this herb's economic potential, contributing partly to economic growth and adding value to wool in global supply chain.

C. odorata dyestuff has prevailed over other natural colorants because of its impressive color fastness against washing, rubbing, perspiration and especially color stability for pH change.

This paper aims to focus on the optimisation of dyeing recipe for dyeing of silk fabric with semisynthetic azo dyes synthesised by chemical modification of areca nut extract.

The response surface model (Box–Behnken design) was used to establish the relation between the parameters of dyeing such as time, temperature and material to liquor ratio. Their output responses in terms of colour strength (K/S values) are reported. Their relationship was tested for predictability and the experimental values and found to match closely, which confirms the model suitability.

Dyed fabrics were tested for their fastness properties such as wash, rub and lightfastness. The results of the fastness tests indicate that modified dyes have good dyeability towards silk fabric. The dyed fabrics were also tested for ultraviolet protection factor and antimicrobial activity, which showed very promising results.

Banned amine testing was done, which confirms the absence of banned amine in synthesised dyes, which indicates the potential of its sustainability. Also, such an approach of modification of natural dyes as semi-synthetic dyes can be surely considered to be a step towards its widespread acceptability and further commercialisation.

The purpose of this research is to develop an environmentally friendly antimicrobial dyeing of cotton fabric from the root of Euclea racemosa. Textile phytochemical finishing is in high demand worldwide because of its low toxicity, low pollution, ease of availability, renewability, pharmacological effects and non-carcinogenic properties, as well as its multifunctionality, rapid process stages and potential health benefit.

The cotton fabric was dyed with aqueous extracts of Euclea racemosa root dyes. Dyes were extracted for 20 min at pH 7.43 at room and boiling temperatures with material-to-liquor ratios (MLRs) of 1:5, 1:10, 1:15 and 1:20, altering one variable at a time, and the cotton fabric was colored using a post-mordanting procedure at 50°C with an MLR of 1:20. Using a properly cleaned Petri plate, the colored samples were tested in vitro for antibacterial activity. A spectrophotometer was used to assess color strength and shade depth, as well as wash fastness and annual rubbing fastness tests for both wet and dry.

L* = 36.29, a* = 58.56, b* = 32.46 and K/S = 0.51 were the CIELAB values for dye extracted at boiling temperature. L* = 47.14, a* = 42.23, b* = 49.61 and K/S = 0.38 were the CIELAB values for dye extracted at room temperature. The wash and rubbing fastness of the dyed samples were outstanding and the dyed cotton fabrics were found antibacterial against Gram-negative bacteria Escherichia coli.

Dyes derived from the E. racemosa root could be used to develop a new antibacterial cotton fabric dye.

Poly (acrylic) starch composites were prepared by polymerizing acrylic acid, acrylamide alone or in admixtures with maize starch using KMnO4/citric acid as redox initiation. The cooked composite pastes were used as partial substituent of kerosene oil emulsion in the pigment printing pastes for cotton fabric. Printing was carried out under a variety of conditions including neutralization of the free carboxylic groups of the polyacrylic acid component in the composite or AA/Aam mixtures, composite concentration, and the type of pigment dyes. The effect of storage on the efficiency of the printing paste was also examined. The printed samples were assessed for colour strength (K/S) overall fastness properties. Results obtained indicate that:

This study aims to evaluate the dyeing of the p-aramid fibre with cationic dyes and investigate the effect of dyeing in the protection of the fibre from ultraviolet (UV) light.

P-aramid fabric has been dyed with cationic dyes using benzyl alcohol as swelling agent to promote the penetration of dye molecules into the fibre. The fabrics were evaluated against colour strength (K/S) value and colour fastness properties after dyed with cationic dyes using full factorial design. This design was used to study the effect of factors that affect the response variables as well as to study the interactions among the factors on response variable. The bursting strength, scanning electron microscopy analysis and X-ray diffraction analysis of undyed and dyed p-aramid fabric were performed before and after exposure to UV light to investigate the changes in mechanical behaviour.

The results show that the p-aramid fabric dyed with cationic dyes has good K/S values and good fastness properties. The exposure of undyed p-aramid fabric to UV light causes serious loss in strength over short duration i.e. 40 h. Dyeing of p-aramid fabric enhances the resistance to UV light which reduces the loss in strength.

Most of the work is patented and no one has done the process optimization for the industry, so this study offers promising outcomes concerning the dyeing of p-aramid fabric with enhanced shade depth and good colour fastness characteristics.

Dyeing of silk fabric was studied to increase dye uptake using eco-friendly glycerine based eutectic solvent (GES), which acts as a swelling agent.

The swelling behaviour of silk fabric in GES was analyzed using three-dimensional laser scanning microscope. Dyeing parameters such as time, temperature and GES concentration were optimized using design of experiments.

In total, 5.34 F-value and 0.0014 p-value of ANOVA represent that the model is significant. An optimized GES assisted dyeing was carried out with two different classes of dyes such as Acid Blue 281 and Acid Red 151 and further compared with that of conventional aqueous dyeing method.

At 70°C, silk fabric achieves desired colour strength after 35 min of dyeing (10 min lesser than conventional) using GES assisted dyeing method. % Dye exhaustion of GES assisted dye bath was carried out and found to be very good. Fastness properties such as washing, light and rubbing fastness of conventional and GES assisted dyed silk fabric showed comparable results.

The purpose of this study is to identify the most influential factors affecting the printing properties and print quality of digitally printed silk fabrics in terms of colour strength and fixation percentage.

In this study, five factors (concentration of thickener, concentration of urea, concentration of alkali, pH of pretreatment liquor and steaming duration) were investigated using a blocked 2⁵⁻¹ fractional factorial experiment. The type of thickeners [polyacrylic acid and polyacrylamide (PAM)] were considered as a block.

Linear models were obtained and statistically tested using both analysis of variance and coefficient of determination (R²), and they were found to be accurate at 90 per cent confidence level. It was revealed that concentration of alkali, concentrations of urea and pH of the pretreatment liquor had an increasing effect on colour strength, whereas concentration of thickener and steaming duration showed decreasing effect on colour strength of digitally printed silk fabrics. Furthermore, concentration of alkali, concentrations of urea had increasing effect on dye fixation percentage, whereas steaming duration showed decreasing effect on dye fixation percentage of digitally printed silk fabrics. In addition, PAM thickener based pretreatment recipe exhibited better printing properties for the digitally printing of silk fabrics.

The main influences and significant two-factor interactions were discussed in detail to gain a better understanding of the printing properties of digitally printed silk fabrics. The findings of this study are useful for further optimisation of pre- and post-treatment processes for digital printing of silk fabrics.