Search results

Natural good-quality sources of aggregates are depleting, whereas large amount of reclaimed asphalt pavement (RAP) is produced annually. Safe disposal and use of RAP in the cold in-place recycling (CIR) using foamed bitumen could be sustainable approach where milling and mixing operations are accomplished simultaneously. This will not only help in minimizing contamination (probability) and transportation cost but also reduces the carbon footprints. Therefore, this study aims to investigate the scope of RAP utilization up to 100% and further its effect on the behavior of reclaimed asphalt foamed bituminous mix.

Reclaimed asphalt foamed bituminous mix (FBM) is still a new technique. The evidence of performance of 100% recycled pavement (CIR) is only anecdotal and lacks in systematic guidelines and literatures. Foam binder coating around the aggregates is also a concern. Therefore, this study is mainly emphasized to investigate the scope of RAP use in the FBM up to 100%. RAP content is varied in each trial, i.e. 70, 85, 100 and 0% (only fresh aggregates), to make the FBM. RAP use and its effect on the behavior of FBM in terms of resilient modulus, variation in resilient modulus with curing, rutting performance and the potential of resistance against the moisture damage are addressed.

Considering the laboratory studies, it can be accomplished that mechanistic properties and performance of FBM are largely influenced by RAP material and portray less susceptible characteristics against the moisture damage. FBM containing 70% RAP content exhibits maximum resilient modulus. However, use of RAP up to 100% in FBM is satisfying the minimum required specification.

Overall, the study may be helpful to highway professionals and could generate another possible option of 100% RAP replacing fresh aggregates in the flexible pavements.

This paper aims to investigate the best methods of utilisation of reclaimed asphalt pavements (RAP) in Egypt, to determine the effect of using 100% RAP instead of using virgin aggregates and asphalt; investigate the effect of thermoplastic elastomer polymer as asphalt modifier; and also improve the mechanical and physical characteristics and consequently improving the quality of asphalt paving, increasing service life of asphalt-paving and reducing costs.

Nano acrylate terpolymers were prepared with different % (Wt.) of and were characterised by Fourier transforms infrared (FTIR), for molecular weight (Mw), by thermo gravimetric analysis (TGA) and by transmission electron microscopy (TEM). A 4% (Wt.) of the prepared nanoemulsion terpolymer was mixed with virgin asphalt as a polymer modifier, to improve and reuse of the RAP. The modified binder was tested. The tests conducted include penetration, kinematic viscosity, softening point and specific gravity. Application of Marshall mix design types; hot mix asphalt (HMA), warm mix asphalt (WMA) and cold in place recycled (CIR). Four different mix designs used; control mix contained virgin asphalt by HMA, and the other three mix designs were polymermodified asphalt sample by HMA, WMA and CIR.

The research results showed that using 4 Wt.% of the prepared nanoemulsion terpolymer to produce hot mix asphalt (HMA) and warm mix asphalt (WMA) achieved higher stability compared to the control mix and cold in place recycled (CIR).

This paper discusses the preparation and the characterisation of nanoemulsion and its application in RAPs to enhance and improve the RAP quality.

Nano-acrylate terpolymer can be used as a new polymer to modify asphalt to achieve the required specifications for RAP.

According to the most recent surveys, Europe produced 265 tonnes of asphalt for road applications in 2014, while the amount of available RAP was more than 50 tonnes. The use of RAP in new blended mixes reduces the need of neat asphalt, making RAP recycling economically attractive.

The purpose of this paper is cost optimization of project schedules under constrained resources and alternative production processes (APPs).

The model contains a cost objective function, generalized precedence relationship constraints, activity duration and start time constraints, lag/lead time constraints, execution mode (EM) constraints, project duration constraints, working time unit assignment constraints and resource constraints. The mixed-integer nonlinear programming (MINLP) superstructure of discrete solutions covers time–cost–resource options related to various EMs for project activities as well as variants for production process implementation.

The proposed model provides the exact optimal output data for project management, such as network diagrams, Gantt charts, histograms and S-curves. In contrast to classic scheduling approaches, here the optimal project structure is obtained as a model-endogenous decision. The project planner is thus enabled to achieve optimization of the production process simultaneously with resource-constrained scheduling of activities in discrete time units and at a minimum total cost.

A set of application examples are addressed on an actual construction project to display the advantages of proposed model.

The unique value this paper contributes to the body of knowledge reflects through the proposed MINLP model, which is capable of performing the exact cost optimization of production process (where presence and number of activities including their mutual relations are dealt as feasible alternatives, meaning not as fixed parameters) simultaneously with the associated resource-constrained project scheduling, whereby that is achieved within a uniform procedure.

To achieve a full understanding of the role of marketing from plan to profit requires a knowledge of the basic building blocks. This textbook introduces the key concepts in the art or science of marketing to practising managers. Understanding your customers and consumers, the 4 Ps (Product, Place, Price and Promotion) provides the basic tools for effective marketing. Deploying your resources and informing your managerial decision making is dealt with in Unit VII introducing marketing intelligence, competition, budgeting and organisational issues. The logical conclusion of this effort is achieving sales and the particular techniques involved are explored in the final section.

Powder bed additive manufacturing processes are widespread due to their many technical and economic advantages. Nevertheless, the disposal of leftover powder poses a problem in terms of process sustainability. The purpose of this paper is to provide an alternative solution to recycle waste PA12 powder from HP multi jet fusion. In particular, the opportunity to use this material as a dispersion in three-dimensional (3D) printed clay is investigated.

A commercial fused deposition modelling printer was re-adapted to extrude a viscous paste composed of clay, PA12 and water. Once printed, parts were dried and then put in an oven to melt the polymer fraction. Four compositions with different PA12 concentration were studied. First, the extrudability of the paste was observed by testing different extrusion lengths. Then, the surface porosities were evaluated through microscopical observations of the manufactured parts. Finally, benchmarks with different geometries were digitalised via 3D scanning to analyse the dimensional alterations arising at each stage of the process.

Overall, the feasibility of the process is demonstrated. Extrusion tests revealed that the composition of the paste has a minor influence on the volumetric flow rate, exhibiting a better consistency in the case of long extrusions. The percentage of surface cavities was proportional to the polymer fraction contained in the mix. From dimensional analyses, it was possible to conclude that PA12 reduced the degree of shrinkage during the drying phase, while it increased dimensional alterations occurring in the melting phase. The results showed that the dimensional error measured on the z-axis was always higher than that of the XY plane.

The method proposed in this paper provides an alternative approach to reuse leftover powders from powder bed fusion processes via another additive manufacturing process. This offers an affordable and open-source solution to companies dealing with polymer powder bed fusion, allowing them to reduce their environmental impacts while expanding their production.

The paper presents an innovative additive manufacturing solution for powder reuse. Unlike the recycling methods in the body of literature, this solution does not require any intermediate transformation process, such as filament fabrication. Also, the cold material deposition enables the adoption of very inexpensive extrusion equipment. This preliminary study demonstrates the feasibility and the benefits of this process, paving the way for numerous future studies.

Environmental, economic and market pressures have led to a dramatic increase in the production of recycled paper fibre in recent years and the growing demand for higher quality grades is now focusing attention on the recycling of office wastes. Although the role of chemistry in the recycling process for paper is well established, the introduction of newer inks and adhesives into the recycling chain has added to the existing problems of “getting the chemistry right”. This article examines the impact on the deinking of secondary paper fibre resulting from evolving ink technologies, catalysed by developments in the printing processes.

Contemporary literature reveals that, to date, the poultry livestock sector has not received sufficient research attention. This particular industry suffers from unstructured supply chain practices, lack of awareness of the implications of the sustainability concept and failure to recycle poultry wastes. The current research thus attempts to develop an integrated supply chain model in the context of poultry industry in Bangladesh. The study considers both sustainability and supply chain issues in order to incorporate them in the poultry supply chain. By placing the forward and reverse supply chains in a single framework, existing problems can be resolved to gain economic, social and environmental benefits, which will be more sustainable than the present practices.

The theoretical underpinning of this research is ‘sustainability’ and the ‘supply chain processes’ in order to examine possible improvements in the poultry production process along with waste management. The research adopts the positivist paradigm and ‘design science’ methods with the support of system dynamics (SD) and the case study methods. Initially, a mental model is developed followed by the causal loop diagram based on in-depth interviews, focus group discussions and observation techniques. The causal model helps to understand the linkages between the associated variables for each issue. Finally, the causal loop diagram is transformed into a stock and flow (quantitative) model, which is a prerequisite for SD-based simulation modelling. A decision support system (DSS) is then developed to analyse the complex decision-making process along the supply chains.

The findings reveal that integration of the supply chain can bring economic, social and environmental sustainability along with a structured production process. It is also observed that the poultry industry can apply the model outcomes in the real-life practices with minor adjustments. This present research has both theoretical and practical implications. The proposed model’s unique characteristics in mitigating the existing problems are supported by the sustainability and supply chain theories. As for practical implications, the poultry industry in Bangladesh can follow the proposed supply chain structure (as par the research model) and test various policies via simulation prior to its application. Positive outcomes of the simulation study may provide enough confidence to implement the desired changes within the industry and their supply chain networks.

While aiming to create methods for fibre recycling, the question of colours in waste textiles is also in focus; whether the colour should be kept or should be removed while recycling textile fibre. More knowledge is needed for colour management in a circular economy approach.

The research included the use of different dye types in a cotton dyeing process, the process for decolourizing and the results. Two reactive dyes, two direct dyes and one vat dye were used in the study. Four chemical treatment sequences were used to evaluate colour removal from the dyed cotton fabrics, namely, HCE-A, HCE-P-A, HCE-Z-P-A and HCE-Y-A.

The objective was to evaluate how different chemical refining sequences remove colour from direct, reactive and vat dyed cotton fabrics, and how they influence the specific cellulose properties. Dyeing methods and the used refining sequences influence the degree of colour removal. The highest achieved final brightness of refined cotton materials were between 71 and 91 per cent ISO brightness, depending on the dyeing method used.

Only cotton fibre and three different colour types were tested.

With cotton waste, it appears to be easier to remove the colour than to retain it, especially if the textile contains polyester residues, which are desired to be removed in the textile refining stage.

Colour management in the CE context is an important new track to study in the context of the increasing amount of textile waste used as a raw material.

This paper deals with the combined management and design of a sustainable pharmaceutical supply chain network with considering recycling.

This paper first utilizes the analytical hierarchy process to select and rank green manufacturers. Second, the authors proposed a multi-objective nonlinear mathematical model to design a sustainable pharmaceutical supply chain network. The proposed model has been linearized and solved using the LP-metric method using GAMS software.

A real case study has been conducted in Iran. The results show that environmental and social issues can be improved while minimizing total costs.

Given the criticality and importance of drugs in human health and the importance of recycling in today's world, proper management and design of a sustainable drug supply chain are necessary. This study pays special attention to environmental issues by utilizing multi-criteria decision approaches and customer satisfaction.

Aiming at the high temperature, high speed, high precision and high surface quality of the copper belt cold rolling, the purpose of this paper is to develop a new type of lubricant for cold rolled copper belt.

The component of the developed oil was determined based on the physical and chemical properties of the base oil and the tribological properties, the oxidation resistance properties, the rust resistance properties, the anti-foam properties, the demulsibility and the other properties of the additives. The orthogonal experiment method was used to determine the optimum adding amount of the additives; finally, the developed oil formulation was determined.

The physical and chemical experiment results show that the developed oil has a good performance of oil film bearing capacity and oxidation resistance. The simulation of rolling experiment found that the developed oil can significantly reduce rolling pressure and effectively reduce the friction in the process of rolling.

The experimental results show that the developed oil has excellent performance and can meet the requirement of lubrication in the process of cold rolling copper belt.