Search results

The study aims to display the bubbles' evolution in the shear layer and their relationship with the pressure fluctuations. Furthermore, the coherent structures of the first six modes are extracted, in order to provide insight into their temporal and spatial evolution and determine the relationship between cavitating bubbles and coherent structures.

In the present study, numerical simulations of submerged jet cavitating flow were carried out at a cavitation inception condition inside an axisymmetric cavity using the large eddy simulation (LES) turbulence model and the Schnerr–Sauer (S–S) cavitation model. Based on snapshots produced by the numerical simulation, dynamic mode decomposition (DMD) was performed to extract the three-dimensional coherent structures of the first six modes in the shear layer.

The cavitating bubbles in the shear layer are deformed to elongated ellipsoid shapes by shear forces. The significant pressure fluctuations are induced by the collapse of the biggest bubble in the group. The first mode illustrates the mean characteristics of the flow field. The flow in the peripheral region of the shear layer is mainly dominated by large-scale coherent structures revealed by the second and third modes, while different small-scale coherent structures are contained in the central region. The cavitating bubbles are associated with small size coherent structures as the sixth or higher modes.

This work demonstrates the feasibility of LES for high Reynolds number shear layer flow. The dynamic mode decomposition method is a novel method to extract coherent structures and obtain their dynamic information that will help us to optimize and control the flow.

(1) This paper first displays the three-dimensional coherent structures and their characteristics in the shear layer of confined jet flow. (2) The relationship of bubbles shape and pressure fluctuations is illustrated. (3) The visualization of coherent structures benefits the understanding of the mixing process and cavitation inception in jet shear layers.

The purpose of this study is to investigate the coherent structures of pulsed opposing jets by large eddy simulation (LES) model and proper orthogonal decomposition (POD) snapshot method. Flow pulsation as an active flow control method is considered for the enhancement of transport phenomena in impinging jets. The effect of flow pulsation parameters such as pulsation signal shape and frequency on the vortical coherent structures, the energy content of primary modes and their variation are studied numerically.

In this study, flow field of turbulent pulsating opposing jets has been simulated using LES. The result of the simulation in different time steps (snapshots) are stored and POD is applied on the snapshots. In this study, the POD method and calculation of spatial modes has been done using OpenFOAM, and time coefficients have been calculated using a MATLAB code.

The results of this study show that the flow excitation has a great effect on the coherent structure formation and the energy containment of fundamental modes of the flow. When the flow was excited by a harmonic sinusoidal or step function, the turbulent kinetic energy accumulated in the set of primary modes. On the other hand, the pulsed opposing jets had more regularity compared to the steady jets. The shapes, patterns and energy values of dominant modes depended on the inlet pulsation signal. An increase in pulsation frequency leads to an augmentation in energy content of the primary modes.

The predictions may be extended to include various pulsation conditions such as: various amplitudes, Reynolds number and aspect ratio.

The results of this study are a valuable source of information for active control of transport phenomena in opposing jet configurations which is used in different industrial applications such as cooling, combustion, reactors, heating and drying processes.

In this study, the coherent structures and energy content of primary modes was studied for the first time by LES model and POD snapshot method and a comprehensive discussion on numerical results is provided.

This study aims to investigate the effects of electroactive morphing on the Airbus A320 Reduced Scale prototype of the H2020 N° 723402 European Research project smart morphing and sensing (SMS) for aeronautical configurations [1]^,[2].

The flow regimes correspond to low subsonic take-off conditions. The morphing is applied through the vibration and slight deformation of the near trailing edge region; respecting the way, this actuation has been applied on the experimental prototype using micro fibre composite actuators. Optimal frequency range has been used, associated with low amplitudes of deformation with the Arbitrary Lagrangian Eulerian methodology. This study used an adapted turbulence modelling with the organised eddy simulation (OES) as well as a hybrid approach delayed detached eddy simulation – with embedded OES (DDES–OES), able to sensitise and keep up the coherent structures development.

The morphing at an optimal frequency (300 Hz) and amplitude (0.7 mm), applied on a length (3.5 cm) near the trailing edge, has been studied at Reynolds number 1 million and incidence of 10°. The effects on the main flow instabilities and on the turbulent vortex structures are analysed using proper orthogonal decomposition. A modification of the wake structures and a formation of organised rows of vortices along the shear layer are obtained. This leads to a quasi-two-dimensional wake, benefits on the aerodynamic performance and a decrease of the frequency peaks in the spectrum, corresponding to an attenuation of the coherent structures.

This study provides a fundamental understanding of how the actuation modifies the coherent and turbulent vortex structures around the wing and in the wake.

The purpose of this paper is to propose a theoretical model for the in‐depth study of organizations, producing a framework which makes it possible to clarify many propositions and to specifically test the theory. In order to carry out this assignment, the paper has two sub‐objectives.

The first one studies the adaptation of the internal culture‐structure variables as a way to determine the congruity of the components of the companies which form the real structure and to study the behavior that is expected from the people in the organization. The second sub‐aim is to analyze whether the partial adaptations of real structure mentioned above are orientated correctly towards the achievement of the strategic aims. Only a suitable design of the real structure which in turn enables the attainment of the aims raised by the strategy will give rise to the obtaining of a suitable level of efficiency.

The key contribution of the paper is to render operative in practical terms such a diffuse concept as is the alignment model.

Alignment theory has been combined with configuration theory to detect the ideal cultural, structural, and strategic options and making the comparison with the real forms possible in order to analyze the possible deviations and to predict the level of efficiency.

This study aims to investigate the morphing concepts able to manipulate the dynamics of the downstream unsteadiness in the separated shear layers and, in the wake, be able to modify the upstream shock–boundary layer interaction (SBLI) around an A320 morphing prototype to control these instabilities, with emphasis to the attenuation or even suppression of the transonic buffet. The modification of the aerodynamic performances according to a large parametric study carried out at Reynolds number of 4.5 × 10⁶, Mach number of 0.78 and various angles of attack in the range of (0, 2.4)° according to two morphing concepts (travelling waves and trailing edge vibration) are discussed, and the final benefits in aerodynamic performance increase are evaluated.

This article examines through high fidelity (Hi-Fi) numerical simulation the effects of the trailing edge (TE) actuation and of travelling waves along a specific area of the suction side starting from practically the most downstream position of the shock wave motion according to the buffet and extending up to nearly the TE. The present paper studies through spectral analysis the coherent structures development in the near wake and the comparison of the aerodynamic forces to the non-actuated case. Thus, the physical mechanisms of the morphing leading to the increase of the lift-to-drag ratio and the drag and noise sources reduction are identified.

This study investigates the influence of shear-layer and near-wake vortices on the SBLI around an A320 aerofoil and attenuation of the related instabilities thanks to novel morphing: travelling waves generated along the suction side and trailing-edge vibration. A drag reduction of 14% and a lift-to-drag increase in the order of 8% are obtained. The morphing has shown a lift increase in the range of (1.8, 2.5)% for angle of attack of 1.8° and 2.4°, where a significant lift increase of 7.7% is obtained for the angle of incidence of 0° with a drag reduction of 3.66% yielding an aerodynamic efficiency of 11.8%.

This paper presents results of morphing A320 aerofoil, with a chord of 70cm and subjected to two actuation kinds, original in the state of the art at M = 0.78 and Re = 4.5 million. These Hi-Fi simulations are rather rare; a majority of existing ones concern smaller dimensions. This study showed for the first time a modified buffet mode, displaying periodic high-lift “plateaus” interspersed by shorter lift-decrease intervals. Through trailing-edge vibration, this pattern is modified towards a sinusoidal-like buffet, with a considerable amplitude decrease. Lock-in of buffet frequency to the actuation is obtained, leading to this amplitude reduction and a drastic aerodynamic performance increase.

In this chapter, each of the completed models of curriculum is presented and evaluated using criteria from the attributes of effective curricula discussed in Chapter 1. Explanations of the design strategies that are used to demonstrate each attribute in a differentiated manner are included. The evaluation process provides an evaluation methodology to demonstrate the effectiveness of each model of a curriculum in a credible and trustworthy way.

In the previous chapters, the individual parts of the curricula were configured, aligned, and interconnected to deliver specific outcomes in each learning module. In this chapter, the components of each curriculum are assembled into one table to exhibit the order contained within each learning module within the overall curriculum. The standards for curricular attributes adopted at the beginning of the design process are the criteria for the evaluation of the completed curriculum. The strategies used to configure the components of each curriculum provide evidence of the curriculum’s characteristics, which demonstrate compliance with each criterion.

The evaluation of these attributes within a curriculum serves several purposes. First, they provide a checklist to guide the design process toward curricula that reflect these standards as developed by the profession of curriculum design in higher education. Second, they provide a measurement of the attributes of the curriculum to demonstrate the compliance of each curricular design with conventional standards. Third, these measurements can be compared with other institutional data to uncover correlations between the design assumptions and learner performance. These correlations often reveal unanticipated results, which inform the effectiveness of the instructional system.

These criteria are applied to the evaluation of the curriculum for each module to demonstrate the diverse manner in which each can be achieved in a discipline-specific manner. The compliance with these criteria is explained to be a matter of demonstration, as used in the discipline of qualitative research. These qualitative evaluations can then be compared with other operational data to understand the effectiveness of the design assumptions for each curriculum.

Control over large-scale coherent structures and stream-wise vortices lead to enhanced entrainment/conservation of the jet which is desirable for most free jet applications such as design of combustion chamber in jet engines and flame length elongation of welding torch used for metal cutting.

A co-flow nozzle with lip thickness of 2 mm, between the primary (inner) and secondary (outer) flow, is selected. Three nozzle combinations are used, i.e. C–C (circle–circle), C–E (circle–ellipse) and C–S (circle–square) for acquiring comparative data. For these nozzle combinations, inner nozzle exit plane is kept as a circle, whereas the outer nozzle exit planes are varied to circle, ellipse and square. The exit plane area of outer nozzle for the nozzle combinations has equivalent diameter, D_e. The nozzles are fabricated in a way that the outer nozzle can be rotated along the longitudinal axis, keeping the inner nozzle intact.

The C–C nozzle combination is effective in low Mach number regime in decaying the jet, when the rotational component is introduced. Around 30% reduction in the jet core length is observed for the C–C nozzle combinations without any lip. The C–E nozzle shows sedative result in decaying or preserving the jet. The C–S nozzle combination shows interesting phenomenon, whereby the low subsonic case tends to conserve the jet by 15% and the higher subsonic case tends to decay the jet by 10%.

The developed nozzle systems show both conservative and destructive effect on the jet, which is desirable for the mentioned applications.

Important to the performance of intelligent systems is the ability of its members to deduce conclusions as responses from premisses received as knowledge during different time periods. Two types of knowledge associations are established for combing knowledge structures received during different time periods into fewer coherent structures. The knowledge system used has the graphs for a general automaton as a formal way of storing knowledge in a computer. Basic types of arguments arising from the natural deductive processes are identified and established as valid through the procedures for formal logic.

Hybrid Reynolds-averaged Navier–Stokes large eddy simulation (RANS-LES) methods have become popular for simulation of massively separated flows at high Reynolds numbers due to their reduced computational cost and good accuracy. The current study aims to examine the performance of LES and hybrid RANS-LES model for a given grid resolution.

For better assessment and contrast of model performance, both mean and instantaneous flow fields have been investigated. For studying instantaneous flow, proper orthogonal decomposition has been used.

Current analysis shows that hybrid RANS-LES is capable of achieving similar accuracy in prediction of both mean and instantaneous flow fields at a very coarse grid as compared to LES.

Focusing mostly on the practical applications of computation, most of the attention has been given to the prediction of one-point flow statistics and little consideration has been put to two-point statistics. Here, two-point statistics has been considered using POD to investigate unsteady turbulent flow.

Popularity in knowledge management has, unfortunately, not been matched by parallel empirical research on the processes, challenges and benefits of knowledge capture in small and medium enterprises (SMEs) in the construction industry, given the fact that 99 per cent of firms in the UK construction industry can be classified as SMEs. This paper aims to discuss the output of a research study, which is focused on knowledge capture in SMEs in construction industry. The paper also aims to present and discuss a computer‐based awareness tool on knowledge capture underpinned by Kolb's experiential learning theory.

The empirical study involved a total of 51 professionals from 26 SMEs in the construction industry. Grounded theory approach was adopted. Also, a content analysis was considered.

The results show that there is lack of awareness of complex issues associated with an effective knowledge capture process as well as ensuing benefits for SMEs in the construction industry. The effective implementation of knowledge capture in SMEs is partly dependent on the vision and flair of the owner/partners of the organisation. It is also determined by culture, structure, people, finance and technology, which warrants a coherent and structured approach.

A computer‐based awareness tool which is underpinned by Kolb's experiential learning theory.