Search results

The purpose of this study is to advance the application of pulverised cow bone ash (PCBA) as a partial replacement of cement in soil stabilisation for the production of bricks. The study investigated the impact of PCBA substitution on the characteristic strength of clay bricks under variant curing media.

Dried cow bones were pulverised, and an energy-dispersive X-ray fluorescence test was conducted on PCBA samples to determine the chemical constituents and ascertain the pozzolanic characteristics. Ordinary Portland cement (OPC) and PCBA were blended at 100%, 75%, 50%, 25% and 0% of cement substitution by mass to stabilise lateritic clay at 10% total binder content for the production of bricks. The binder-to-lateritic clay matrixes were used to produce clay bricks and cylinders for compressive and splitting tensile strength tests, respectively.

The study found that PCBA and OPC have similar chemical compositions. The strength of the clay bricks increased with curing age, and the thermal curing of clay bricks positively impacted the strength development. The study established that PCBA is a suitable substitute for cement, up to 25% for stabilisation in clay brick production.

Construction stakeholders can successfully use a PCBA-OPC binder blend of 1:3 to stabilise clay at 10% total binder content for the production of bricks. The stabilised clay bricks should be cured at an elevated temperature of approximately 90°C for 48 h to achieve satisfactory performance.

The PCBA-OPC binder blend provides adequate soil stabilisation for the production of clay bricks and curing the clay bricks at elevated temperature. This aspect of the biomass/OPC binder blend has not been explored for brick production, and this is important for the reduction of the environmental impacts of cement production and waste from abattoirs.

This study has assessed the thermal performance of locally fabricated bio-based building envelopes made of coconut and corn husk composite bricks to reduce building wall heat transmission load and energy consumption towards green building adaptation.

Samples of coconut fiber (coir) and corn husk fiber bricks were fabricated and tested for their thermophysical properties using the Transient Plane Source (TPS) 2500s instrument. A simulation was conducted using Dynamic Energy Response of Building - Lunds Tekniska Hogskola (DEROB-LTH) to determine indoor temperature variation over 24 h. The time lag and decrement factor, two important parameters in evaluating building envelopes, were also determined.

The time lag of the bio-based composite building envelope was found to be in the range of 4.2–4.6 h for 100 mm thickness block and 10.64–11.5 h for 200 mm thickness block. The decrement factor was also determined to be in the range of 0.87–0.88. The bio-based composite building envelopes were able to maintain the indoor temperature of the model from 25.4 to 27.4 °C, providing a closely stable indoor thermal comfort despite varying outdoor temperatures. The temperature variation in 24 h, was very stable for about 8 h before a degree increment, providing a comfortable indoor temperature for occupants and the need not to rely on air conditions and other mechanical forms of cooling. Potential energy savings also peaked at 529.14 kWh per year.

The findings of this study present opportunities to building developers and engineers in terms of selecting vernacular materials for building envelopes towards green building adaptation, energy savings, reduced construction costs and job creation.

This study presents for the first time, time lag and decrement factor for bio-based composite building envelopes for green building adaptation in hot climates, as found in Ghana.

The face value of nonowner-occupied real estate and business fixed assets is excluded from Zakah, according to most Fiqh scholars who argue that it has not been explicitly ordered during the lifetime of Prophet Muhammad (sas). This study aims to test the hypothesis that the role of these properties in the early Islamic economy was insignificant and, therefore, differed from today.

A qualitative historical analysis of primary Islamic sources and narrations from early Muslim historiography has been conducted to understand real estate sales and rent, construction costs and the number and size of houses owned by the Sahabah. In addition, inheritance reports and land gift records have been examined to obtain relevant information about the value of real estate. As for business fixed assets, the type, number and wealth of craftspeople as well as their tools have been analyzed to reveal their significance in comparison with today.

The findings of this study confirm the hypothesis that real estate for investment purposes and business fixed assets were quasi-non-existent during the lifetime of the Prophet (sas) and, therefore, irrelevant from a Zakah perspective.

This study intends to be a catalyst for the reconsideration of Zakah on these items of wealth and contributes to the Fiqhi discourse.

The United Nations has demonstrated a commitment to preserving the ecosystem through its 2030 sustainable development goals agenda. One crucial objective of these goals is to promote a healthy ecosystem and discourage practices that harm it. Building materials production significantly contributes to the emissions of greenhouse gases. This poses a threat to the ecosystem and prompts a growing demand for sustainable building materials (SBMs). The purpose of this study is to investigate SBMs to determine their utilization in construction operations and the potential impact their application could have on construction productivity.

A systematic review of the existing literature in the field of SBMs was conducted for the study. The search strings used were “sustainable” AND (“building” OR “construction”) AND “materials” AND “productivity”. A total of 146 articles were obtained from the Scopus database and reviewed.

Bio-based, cementitious and phase change materials were the main categories of SBMs. Materials in these categories have the potential to substantially contribute to sustainability in the construction sector. However, challenges such as availability, cost, expertise, awareness, social acceptance and resistance to innovation must be addressed to promote the increased utilization of SBMs and enhance construction productivity.

Many studies have explored SBMs, but there is a dearth of studies that address productivity in the context of SBMs, which leaves a gap in understanding. This study addresses this gap by drawing on existing studies to determine the potential implications that using SBMs could have on construction productivity.

The traditional courtyard shophouses modifications, alterations and deterioration over the years have become a source of concern to major stakeholders. In George Town World Heritage Site Malaysia, studies have shown that the worst hit among its various shophouses are the Straits Chinese traditional courtyard eclectic style shophouses. This paper investigates the traditional courtyard shophouses concerning the role of architectural formation design components, and how this can sustain the place identity of the Straits Chinese typology.

The methodological approach regards the collection of data and analysis of 30 face-to-face interviews and the observation of Lots number 3, 5 and 7, located along Lorong Ikan, George Town World Heritage Site.

It was found that these Lots express the place identity of the Straits Chinese, and its major exterior architecture components to be observed are the column head (Chi Tou) capital, parapet wall, bressummer beam and ionic column, and gable and gable ends.

This paper is limited to the role of architectural formation design components. Future research is needed to expand the scope of participant elements via a quantitative approach. This will enhance the validation of findings from this paper.

It is recommended the use of the proposed checklist to enhance the sustainability of the architectural components regarding the place identity of these styles of shophouses, which provides salutary lessons on how to preserve the heritage buildings. Also, major stakeholders with leading evidence from relevant government agencies should ensure the preservation of these cultural and heritage buildings for the next generation.

This paper found that the family beliefs and social impact were the components that express the place identity of the Straits Chinese.

This paper demonstrates that the role of architectural formation design components regarding place identity of Straits Chinese traditional courtyard eclectic style shophouses cannot be over-emphasised.

This study aims to demonstrate the possibility of showing the functionality of complex microbial groups, within ancient structures within a process of refurbishment on a heritage building information modelling (BIM) platform.

Both a qualitative and qualitative research method will be used throughout, as observational and scientific results will be obtained and collated. This path being; phenomena – acquisition tools – storage – analysis tools – literature. Using this methodology, one pilot study within the scope of demolition and refurbishment, using suitable methods of collecting and managing data (structural or otherwise), will be used and generated by various software and applications. The principle methods used for the identification of such micro-organisms will incorporate a polymerase chain reaction method (PCR), to amplify DNA and to identify any or all spores present. The BIM/historical BIM (HBIM) process will be used to create a remotely-based survey to obtain and collate data using a laser scanner to produce a three-dimensional point cloud model to evaluate and deduce the condition, make-up and stature of the monument. A documentation management system will be devised to enable the development of plain language questions and an exchange information requirement, to identify such documentation required to enable safe refurbishment and to give health and safety guidance. Four data sampling extractions will be conducted, two for each site, within the research, for each of the periods being assessed, that being the Norman and Tudor areas of the monument.

From laboratory PCR analysis, results show a conclusive presence of micro-organism groups and will be represented within a hierarchical classification, from kingdom to species.

The BIM/HBIM process will highlight results in a graphical form to show data collected, particularly within the PCR application. It will also create standardisation and availability for such data from ancient monuments to make available all data stored, as such analysis becomes substantially important to enable the production of data sets for comparison, from within the framework of this research.

This paper aims to determine the types of legal mechanisms that authorities can use to recover stolen assets for and from China.

Newspaper articles and books are examined as are relevant reports by various regulatory authorities and academic institutions.

The effectiveness of legal mechanisms in the recovery of stolen assets may be affected by issues such as the difficulties in tracing illicit funds, the ambiguous nature of “value” as well as the rise in technology.

There are limited data available in relation to the prevalence of corrupt officials along the Belt and Road Initiative and the statistical success in the recovery of stolen assets. Any discussions within this paper are based on the impressionistic observations of this author, which may not reflect the true state of affairs of the Belt and Road Initiative.

Those who are interested in examining how authorities could recover stolen assets from and for China will have an interest in this topic.

The value of the paper is to demonstrate the difficulties in recovering stolen assets for and from China.

This paper aims to identify modern construction techniques for affordable housing, such as prefabrication and interlocking systems, that can save time and cost while also providing long-term sustainable benefits that are desperately needed in today's construction industry.

The need for housing is growing worldwide, but traditional construction cannot cater to the demand due to insufficient time. There should be some paradigm shift in the construction industry to supply housing to society. This paper presented a state-of-the-art review of modern construction techniques practiced worldwide and their advantages in affordable housing construction by conducting a systematic literature review and applying the backward snowball technique. The paper reviews modern prefabrication techniques and interlocking systems such as modular construction, formwork systems, light gauge steel/cold form steel construction and sandwich panel construction, which have been globally well practiced. It was understood from the overview that modular construction, including modular steel construction and precast concrete construction, could reduce time and costs efficiently. Further enhancement in the quality was also noticed. Besides, it was observed that light gauge steel construction is a modern phase of steel that eases construction execution efficiently. Modern formwork systems such as Mivan (Aluminium Formwork) have been reported for their minimum construction time, which leads to faster construction than traditional formwork. However, the cost is subjected to the repetitions of the formwork. An interlocking system is an innovative approach to construction that uses bricks made of sustainable materials such as earth that conserve time and cost.

The study finds that the prefabrication techniques and interlocking system have a lot of unique attributes that can enable the modern construction sector to flourish. The study summarizes modern construction techniques that can save time and cost, enhancing the sustainability of construction practices, which is the need of the Indian construction industry in particular.

This study is limited to identifying specific modern construction techniques for time and cost savings, lean concepts and sustainability which are being practiced worldwide.

Modern formwork systems such as Mivan (Aluminium Formwork) have been reported for their minimum construction time which leads to faster construction than traditional formwork.

The need for housing is growing rapidly all over the world, but traditional construction cannot cater to the need due to insufficient time. There should be some paradigm shift in the construction industry to supply housing to society.

This study is unique in identifying specific modern construction techniques for time and cost savings, lean concepts and sustainability which are being practiced worldwide.

This paper presents the outcomes of the international project “Protecting Landscape Heritage: a requalification project as an instrument for the re-birth of Quang Tri Old Citadel in Vietnam”, achieved with scientific cooperation between the Università Politecnica delle Marche (Italy) and Hue University of Sciences (Vietnam) funded by the Italian Ministry of Foreign Affairs and International Cooperation and Ministry of Science and Technology of Vietnam. The research focuses on the Quang Tri Citadel, founded in 1809 and now in an advanced state of degradation.

For the purpose of rehabilitation, the wide multidisciplinary project first examined the historical context of the military model, the architectural aspects of the structure, the characterization of the existing materials, the degradation levels of different parts, and, finally, a proposal of the suggested interventions.

The original structure and geometry were extrapolated and studied. Building materials were produced with nearby raw materials. Firing temperatures of bricks ranged from 800 to 1,000 °C, hydraulic lime was supposed the binder of the mortar with a calcination temperature lower than 1,000 °C. Damage assessment was provided and after these analyses a requalification project was proposed so the cultural heritage can play a role for the future in the dialog between different cultures.

The requalification project achieved by an integrated analytical approach defines aspects in relation to the restoration of the structures, enabling compliance with the geometry, techniques, building materials used in the original construction and allowing its guardianship and management to align with the historical context of the architectural heritage.

The design for deconstruction (DfD) technique, a contemporaneous solution to demolition by optimizing disassembly activities to enable reuse, has recently emerged with several promises to promote the circular economy. However, little attention has been given to its implementation among design professionals, especially in the Global South. Therefore, this study aims to explore the drivers for DfD implementation among design professionals in the Ghanaian construction industry (GCI).

The study adopted a mixed research approach (explanatory sequential design) with an initial quantitative instrument phase, followed by a qualitative data collection phase. Data from the survey were analyzed using mean, standard deviation, one-sample t-Test, and normalization value (NV) test after a review of pertinent literature. These data were then validated through semistructured interviews with ten design professionals with in-depth knowledge of DfD.

The findings revealed that although all ten drivers are important, the eight key drivers for the DfD implementation were identified as, in order of importance, “Availability of computer software applications regarding DfD,” “Inclusion of DfD in the formal education of design professionals,” “Increasing public awareness of the concept of DfD,” “Organizing workshops/seminars for design professionals on the concept of DfD,” “Availability of DfD training,” “Regulation regarding DfD,” “Industry guidance regarding DfD” and “Establishing a market for salvaged construction components.”

This study's findings provide insights into an under-investigated topic in Ghana and offer new and additional information and insights into the current state-of-the-art on the factors that drive DfD implementation.