Search results

The purpose of this paper is to report the structural properties of Al_xGa_1−xN (0≤x≤1) grown on sapphire substrate by means of X‐ray diffraction (XRD) technique. The main purpose of this work was to investigate the effects of Al(x) composition to the structural and microstructural properties of Al_xGa_1−xN ternary alloy such as the crystalline quality, crystalline structure and lattice constant c.

Al_xGa_1−xN thin films with wurtzite structure in the composition range of 0≤x≤1 are used in this study. The compositions of the samples are calculated using Vegard's law and verified by energy dispersive X‐ray analysis. The samples are then characterized by means of XRD rocking curve (RC) and phase analysis.

Investigation revealed that the full width half maximum (FWHM) of RC increase with the increase x value. This indicates that the crystalline quality of the samples deteriorate with the increase of Al compositions. The best fit of the non‐linear interpolation of the FWHM of the (002) diffraction RC data suggested that a maximum disorder should be expected in this mixed crystals system when the composition x≈45 percent.

This paper provides valuable information on the effect of Al compositions to the structural characteristics of Al_xGa_1−xN alloy system. The availability of information about maximum disorder of Al composition in Al_xGa_1−xN (0≤x≤1) alloy system provides useful reference in device fabrications where researchers are able to choose correct alloy composition in order to fabricate good quality devices.

The purpose of this paper is to synthesize porous zinc oxide (ZnO) by means of strain etching/wet chemical etching method with the use of 0.5% of nitric acid (HNO₃) etchant. The structural and surface morphological properties of the samples are accessed by using X‐ray diffraction (XRD) and scanning electron microscopy (SEM) characterization techniques.

ZnO samples used in this work were deposited on the p‐Si (111) substrates by using radio frequency (RF) sputtering technique. Wet chemical etching processes with the use of 0.5% HNO₃ etchant was applied on these samples in order to obtain porous structure. The porous ZnO samples are characterized by means of XRD and SEM to access their structural and surface morphological properties.

The XRD and SEM cross‐sectional measurements revealed that the thickness of the etched ZnO thin films is proportional to the etching time. SEM micrographs show that the surface morphology of ZnO changes over etching time. On the other hand, XRD results indicate that the crystallite sizes of the ZnO(002) decreases when the etching time increases.

The paper shows how porous ZnO thin films have been successfully synthesized by using simple wet chemical etching. SEM images reveal that this method is reliable when producing porous structure ZnO surfaces.

Provides some guidance on building a collection on Chinese organized crime ‐ first a definition of it and then details of some of the resources which could be included in a collection in the areas of: primary texts, general works, encyclopaedias and dictionaries, films, newspapers, periodicals and Web sites.

In the early industrial age which with high intensity of machine and labor, using financial measurement index was good enough to tie in company’s mechanization and philosophy of management and been in efficiency. But being comply with “New Economic age,” a new economic environment is full of knowledge and information, the enterprise competition had changed from tangible assets, plants to intangible innovation ability of knowledge. As recognizing the new tendency by enterprise, they value gradually the growth and influence from learning. Practice of organization learning not only needs firm structure and be in coordination with both hardware and software, but also needs an affect measurement model to offer enterprise to estimate learning performance. It’s a good instrument of financial performance measure mold in the past years, But it’s for measuring the past, couldn’t formulate enterprise trend to future, hard to estimate investment for future, such as development of products, organization learning, knowledge management etc, as which intangible assets and knowledge ability just the key factors of being win around competition environment in the future. In 1992, Kaplan and Norton brought up Balance Scorecard (BSC) on Harvard Business Review, as an instrument helping enterprise to measure performance, which is being considered to be a most influence management instrument. It added non‐financial index such as customer, internal process and learning growth besides traditional financial index, as offering enterprise an index to measure and manage intangible assets and intellectual property. As being aware of organization learning is hard to be ignored in the new economic age, this research is based on learning and growth of BSC, and citing one national material company try to let the most difficult measurement performance of organization learning, to be estimate through BSC, analyze of factor and individual case, to discuss the company how to make the related strategy and vision of organization learning to develop learning and growth of the structure of BSC, subject the matter of out put factors to be discussed, and measure the outcomes as a result of research. The research affect offers (1) the base implement procedure of carrying out BSC; (2) the reference of formulating measurement index while enterprise using BSC to estimate performance of organization learning; (3) the possibility bottleneck maybe forcing while carrying out BSC, to be an improvement or preventive for enterprise.

This study aims to build an indigenous Chinese management model based on Chinese culture.

This study adopts new institutionalism as its theoretical foundation, examines the core values of Chinese civilization in retrospect and identifies the key features of a Chinese management model. In this study, the authors develop a “glacier model” and test its reliability with the Haier Group.

This study proposes a new definition for a management model: a knowledge system based on institutional civilization that reflects management theory and practice. It analyzes the institutional environment of Chinese civilization: the recessive bottom-most layers are CBTLG (Confucianism, Taoism, Buddhism, legalism and Guan theory) and MDSX (Mao Zedong thought, Deng Xiaoping theory, scientific thoughts of development and Xi Jinping thought), the dominant principles are “Socialism and Mixed Economy” and the core values of Chinese culture compose the layer between them. This study concludes that the distinguishing features of Chinese management are harmonious management, the order-diversity pattern and Tai Chi management.

This paper only discussed the management model of China. Based on the conclusions of this paper, in the future, researchers comparative studies on Chinese management and other countries’ management models with glacier model. By so doing, people can have a more comprehensive understanding of management models of different cultures.

The management characteristics contained in Chinese culture can provide more abundant knowledge for understanding current organizational management issues. A better understanding of the characteristics of a Chinese management model based on Chinese civilization is conducive to foreign investment or cross-cultural cooperation between Chinese and foreign enterprises.

This study provides a new perspective in studying Chinese management. The theoretical values of the glacier model are as follows: it is rooted in a Chinese management context; it makes up for the insufficiency in the current study of institutionalism; and it guides cross-cultural communication and management. The authors hope that the study attracts the attention of more scholars. Any civilization of any region or country can construct its own management model using the frame of the glacier model.

The paper aimed to explore the factors leading to lower rates of whole grain consumption amongst the Malaysian adult population according to the Reasoned Action Approach (RAA) model.

This paper employed a qualitative approach to explore the factors that influence whole grain consumption. Individual interviews were conducted online amongst Malaysian adults aged 18 years and above who purchase groceries and are responsible for food preparation at home. Interviews were transcribed verbatim and analysed thematically using the NVivo version 12 software.

A majority of the respondents (N = 30; mean age = 39.2 years old) were females (n = 19, 63.3%) and lived in urban areas (n = 23, 76.7%). Even though over 86.7% of respondents (n = 26) had consumed whole grain products, a majority of them had inadequate knowledge surrounding whole grains (n = 25, 83.3%). Predominant barriers to whole grain consumption were perceived cost (n = 30, 100%), dislikes towards the sensory aspects of whole grain foods (n = 28, 93.3%), inadequate knowledge in identifying whole grains in foods (n = 25, 83.3%), poor awareness (n = 25, 83.3%), lack of knowledge in preparation of whole grain foods (n = 25, 83.3%), a wide variety of other tasty cuisine alternatives in Malaysia (n = 25, 83.3%), low availability and accessibility of whole grain products (n = 18, 60%), cultural eating behaviours (n = 17, 56.7%) and family influence (n = 16, 53.3%). Besides that, having a longer preparation time, restrictive diets and social influences were minor barriers.

This study addresses the barriers that should be highlighted in future health educational interventions, and presents a challenge to the food industry to develop whole grain foods which are easily accepted by consumers.

This is the first paper to outline the factors associated with poor consumption of whole grains amongst the Malaysian adult population.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

This study aims to investigate the motivations for the adoption of Industry 4.0 technologies among manufacturing firms in developing economies. Specifically, the effects of relative advantage of the technologies, competitive pressure, and government support on the adoption are explored. Moreover, the mediating role of top management support between environmental factors (government support and competitive pressure) and the adoption of Industry 4.0 technologies is examined.

A research model is developed based on the technology-organization-environment (TOE) framework strengthened by institutional theory. Structural equation modeling (SEM) approach is employed to evaluate the model using data obtained from 215 manufacturing firms through a cross-industry survey. Additionally, a post-hoc analysis is conducted using cluster analysis and ANOVA.

The results show that competitive pressure and government support significantly promote top management support, which in turn contributes to the adoption of Industry 4.0 technologies. Relative advantage of the technologies is not significantly related to the adoption.

This study does not explore the relationship between technology type and the specific needs of manufacturing firms. Future researchers can conduct a more comprehensive analysis by examining how different technology types align with the unique needs of individual companies.

The findings of this study have implications for both policymakers and managers. Policymakers can leverage these insights to understand the underlying motivations behind manufacturing firms' adoption of Industry 4.0 technologies and develop promoting policies. In turn, managers should keep an eye on government policies and utilize government support to facilitate technology adoption.

This study uncovers the underlying motivations—government support and competitive pressure—for the adoption of Industry 4.0 technologies among manufacturing firms in developing economies. Meanwhile, it complements previous research by showing the mediating role of top management support between environmental factors (government support and competitive pressure) and the adoption of Industry 4.0 technologies.

The purpose of this paper is to utilize a multi-method design for research on corruption in China. Corruption in any society is inimical to good governance. Singapore, despite her size, is argued to be a plausible model for China.

Taking a multi-method approach, the phenomena of corruption is investigated from: etymological analyses for corruption (European roots) and its Chinese equivalent, 贪污 (pinyin: tan wu) case studies taken from three periods: current, Qing Dynasty and to founding of China (zhong guo, Qin Dynasty) to ground our policy recommendation of China be modeling after Singapore on the basis of our analysis of statistical (2013 and longitudinal) data. In the process, the authors embark on inter-country comparisons (mainly Confucian China, Hong Kong, Taiwan, South Korea and Japan).

Here are the key insights: scholars are unaware the English word corruption is narrower in scope than the Chinese equivalent tan wu贪污. As far back as 3,000 years, the Chinese had attributed wu, 污 as filthy, polluting, dirty to psychological concept of greed tan, 贪. In English, corruption does not denote greed per se. Falsification of facts as a political ploy dates back to Qin dynasty. Destabilizing corrupt cases occurred in China today as in Qing Dynasty. Singapore rather Hong Kong is a better model for China in reforming society.

This paper illustrates a distinctively, in-depth approach to research on Chinese management. It shows why it is important to clarify key concepts: corruption in the West and tan wu贪污in the East. Historical cases are utilized to show the presence of a continuing Chinese mind set. The authors argued for China to embark on a city-by-city strategy (modeling after Singapore) toward becoming a corruption-free society. Now, as 3,000 years ago, the Chinese conceptualization of corruption embeds the psychology of greed.

China is at a crossroad of her economic development. There is a possible risk of China being destabilized through the corruption of the top rung of leadership. Chinese authorities must with urgency, rein in corruption. An approach is proposed in this paper.

In terms of style, approach and method of research, this paper is highly original. The integrative research here provides a rationale and basis for the Chinese leaders to implement a policy for a less corrupt society.

This study investigated how customer orientation and relationships influenced relational benefits via employees' attitudes toward travel agencies and partnership management.

Survey questionnaires were mailed to experts of travel agencies in Taiwan. The hypothesis of this study was tested and used a research model characterized by the SEM-PLS approach.

The findings of this study indicate that the travel service involves a wide range of firms, regardless of internal or external partner management, and to develop the Muslim tourism market sustainability.

From a theoretical perspective, it was found that customer orientation of travel agencies and relationship selling among travel agencies affects partnership management of travel agencies and their employees' attitudes, which were positively associated with the relational benefit of travel agencies.

Travel agencies must maintain continuous collaborative relationships to ensure the sustainable development of the Muslim tourism market.

This study provides a meaningful model for investigating the trend and tourism products of the Muslim tourism market regarding collaboration between travel agencies and partners.