Search results

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

Nanosensors have a wide range of applications because of their high sensitivity, selectivity and specificity. In the past decade, extensive and pervasive research related to nanosensors has led to significant progress in diverse fields, such as biomedicine, environmental monitoring and industrial process control. This led to better and more efficient detection and monitoring of physical and chemical properties at better resolution, opening new horizons in the development of novel technologies and applications for improved human health, environment protection, enhanced industrial processes, etc.

In this paper, the authors discuss the application of citation network analysis in the field of nanosensor research and development. Cluster analysis was carried out using papers published in the field of nanomaterial-based sensor research, and an in-depth analysis was carried out to identify significant clusters. The purpose of this study is to provide researchers to identify a pathway to the emerging areas in the field of nanosensor research. The authors have illustrated the knowledge base, knowledge domain and knowledge progression of nanosensor research using the citation analysis based on 3,636 Science Citation Index papers published during the period 2011 to 2021.

Among these papers, the bibliographic study identified 809 significant research publications, 11 clusters, 556 research sector keywords, 1,296 main authors, 139 referenced authors, 63 nations, 206 organizations and 42 journals. The authors have identified single quantum dot (QD)-based nanosensor for biological applications, carbon dot-based nanosensors, self-powered triboelectric nanogenerator-based nanosensor and genetically encoded nanosensor as the significant research hotspots that came to the fore in recent years. The future trend in nanosensor research might focus on the development of efficient and cost-effective designs for the detection of numerous environmental pollutants and biological molecules using mesostructured materials and QDs. It is also possible to optimize the detection methods using theoretical models, and generalized gradient approximation has great scope in sensor development.

The future trend in nanosensor research might focus on the development of efficient and cost-effective designs for the detection of numerous environmental pollutants and biological molecules using mesostructured materials and QDs. It is also possible to optimize the detection methods using theoretical models, and generalized gradient approximation has great scope in sensor development.

This is a novel bibliometric analysis in the area of “nanomaterial based sensor,” which is carried out in CiteSpace software.

Recently, powerful instruments for biomedical engineering research studies, including disease modeling, drug designing and nano-drug delivering, have been extremely investigated by researchers. Particularly, investigation in various microfluidics techniques and novel biomedical approaches for microfluidic-based substrate have progressed in recent years, and therefore, various cell culture platforms have been manufactured for these types of approaches. These microinstruments, known as tissue chip platforms, mimic in vivo living tissue and exhibit more physiologically similar vitro models of human tissues. Using lab-on-a-chip technologies in vitro cell culturing quickly caused in optimized systems of tissues compared to static culture. These chipsets prepare cell culture media to mimic physiological reactions and behaviors.

The authors used the application of lab chip instruments as a versatile tool for point of health-care (PHC) applications, and the authors applied a current progress in various platforms toward biochip DNA sensors as an alternative to the general bio electrochemical sensors. Basically, optical sensing is related to the intercalation between glass surfaces containing biomolecules with fluorescence and, subsequently, its reflected light that arises from the characteristics of the chemical agents. Recently, various techniques using optical fiber have progressed significantly, and researchers apply highlighted remarks and future perspectives of these kinds of platforms for PHC applications.

The authors assembled several microfluidic chips through cell culture and immune-fluorescent, as well as using microscopy measurement and image analysis for RNA sequencing. By this work, several chip assemblies were fabricated, and the application of the fluidic routing mechanism enables us to provide chip-to-chip communication with a variety of tissue-on-a-chip. By lab-on-a-chip techniques, the authors exhibited that coating the cell membrane via poly-dopamine and collagen was the best cell membrane coating due to the monolayer growth and differentiation of the cell types during the differentiation period. The authors found the artificial membrane, through coating with Collagen-A, has improved the growth of mouse podocytes cells-5 compared with the fibronectin-coated membrane.

The authors could distinguish the differences across the patient cohort when they used a collagen-coated microfluidic chip. For instance, von Willebrand factor, a blood glycoprotein that promotes hemostasis, can be identified and measured through these type-coated microfluidic chips.

The purpose of this study is to introduce a new type of sensor which uses microwave metamaterials and direct-coupled split-ring resonators (DC-SRRs) to measure the dielectric properties of solid materials in real time. The sensor uses a transmission line with a bridge-type structure to measure the differential frequency, which can be used to calculate the dielectric constant of the material being tested. The study aims to establish an empirical relationship between the dielectric properties of the material and the frequency measurements obtained from the sensor.

In the proposed design, the opposite arm of the bridge transmission line is loaded by DC-SRRs, and the distance between DC-SRRs is optimized to minimize the mutual coupling between them. The DC-SRRs are loaded with the material under test (MUT) to perform differential permittivity sensing. When identical MUT is placed on both resonators, a single transmission zero (notch) is obtained, but non-identical MUTs exhibit two split notches. For the design of differential sensors and comparators based on symmetry disruption, frequency splitting is highly useful.

The proposed structure is demonstrated using electromagnetic simulation, and a prototype of the proposed sensor is fabricated and experimentally validated to prove the differential sensing principle. Here, the sensor is analyzed for sensitivity by using different MUTs with relative permittivity ranges from 1.006 to 10 and with a fixed dimension of 9 mm × 10 mm ×1.2 mm. It shows a very good average frequency deviation per unit change in permittivity of the MUTs, which is around 743 MHz, and it also exhibits a very high average relative sensitivity and quality factor of around 11.5% and 323, respectively.

The proposed sensor can be used for differential characterization of permittivity and also as a comparator to test the purity of solid dielectric samples. This sensor most importantly strengthens robustness to environmental conditions that cause cross-sensitivity or miscalibration. The accuracy of the measurement is enhanced as compared to conventional single- and double-notch metamaterial-based sensors.

Spatial olfactory design in the library appears to be a practical approach to enhance the coordination between architectural spaces and user behaviors, shape immersive activity experiences and shape immersive activity experiences. Therefore, this study aims to explore the association between the olfactory elements of library space and users’ olfactory perception, providing a foundation for the practical design of olfactory space in libraries.

Using the olfactory perception semantic differential experiment method, this study collected feedback on the emotional experience of olfactory stimuli from 56 participants in an academic library. From the perspective of environmental psychology, the dimensions of pleasure, control and arousal of users’ olfactory perception in the academic library environment were semantically and emotionally described. In addition, the impact of fatigue state on users’ olfactory perception was analyzed through statistical methods to explore the impact path of individual physical differences on olfactory perception.

It was found that users’ olfactory perception in the academic library environment is likely semantically described from the dimensions of pleasure, arousal and control. These dimensions mutually influence users’ satisfaction with olfactory elements. Moreover, there is a close correlation between pleasure and satisfaction. In addition, fatigue states may impact users’ olfactory perception. Furthermore, users in a high-fatigue state may be more sensitive to the arousal of olfactory perception.

This article is an empirical exploration of users’ perception of the environmental odors in libraries. The experimental results of this paper may have practical implications for the construction of olfactory space in academic libraries.

The main aim of this study is to characterise and identify specific chemo-sensory profiles of ciders from the Canary Islands (Spain).

Commercial samples of Canary ciders were compared to ciders from the Basque Country and Asturias. In total, 18 samples were studied, six for each region. The analysis comprised their sensory profiling and chemical characterisation of their polyphenolic profile, volatile composition, conventional chemical parameters and CIELAB colour coordinates. In parallel, the sensory profile of the samples from the Canary Islands was first compared with their Basque and Asturian counterparts by labelled sorting task. Then, their specific aroma profile was characterised by flash profile. Further quantification of sensory-active compounds was performed by GC–MS and GC-FID to identify the volatile compounds involved in their aroma profile.

Results show that Canary ciders present a specific chemical profile characterised by higher levels of ethanol, and hydroxycinnamic acids, mainly t-ferulic, t-coumaric and neochologenic acids, and lower levels of volatile and total acidity than their Asturian and Basque counterparts. They also present a specific aroma profile characterised by fruity aroma, mainly fruit in syrup and confectionary, and sweet flavours related to their highest levels of vinylphenols formed by transformation of hydroxycinnamic acids.

An integrated strategy to explore the typicity of the currently existing Canary ciders in the market was developed. The results are important in that they will help other regions to identify specific typical chemo-sensory profiles and to promote the creation of certifications supporting regional typicity.

Manufacturing small and medium-sized enterprises (SMEs) are heading towards smart manufacturing despite growing challenges caused by globalisation and rapid technological advancement. These SMEs, particularly textile SMEs of Bangladesh, also face challenges in implementing sustainability and organisational ambidexterity (OA) due to resource constraints and limitations of conventional leadership styles. Adopting paradoxical leadership (PL) and entrepreneurial bricolage (EB) is important to overcome the challenges. However, these dynamics are less explored in academia, especially in the Bangladeshi textile SMEs context. Hence, the purpose of this study is to investigate the influence of the adoption of smart technologies (ASTs), PL and OA, EB on sustainable performance (SP) of textile SMEs in Bangladesh.

A cross-sectional and primary quantitative survey was conducted. Data from 361 textile SMEs were collected using a structured self-administrated questionnaire and analysed by partial least square structural equation modelling (PLS-SEM).

The statistical outcome confirms that ASTs and PL significantly influence SP and OA. OA plays a significant mediating role for PL and is insignificant for ASTs, and EB significantly moderates among ASTs, PL and SP.

As this study is cross-sectional and focussed on a single city (Dhaka, Bangladesh), conducting longitudinal studies and considering other parts of the country can provide exciting findings.

This research provides valuable insights for policymakers, management and textile SMEs in developing and developed countries. By adopting unique and innovative OA, PL and EB approaches, manufacturing SMEs, especially textile companies, can be more sustainable.

This study has a novel, pioneering contribution, as it empirically validates the role of multiple constructs such as AST, PL, OA and EB towards SP in the context of textile SMEs in a developing country like Bangladesh.

The purpose of this paper is to examine FaceReader as a tool to compare the olfactory preferences of two selected countries. This paper examines the olfactory preferences of customers in the bakery department of a grocery store in the Slovak and the Spanish market.

The aim of this study is to examine subconscious/unconscious preferences in the selection of aromas suitable for the bakery department in the Slovak and the Spanish market. In this case, it is not a classical qualitative sensory testing of the perception of fragrances. The aim is to identify the associations of scents related to the selected sales department through images of the selected aromas. A special platform is used to obtain subconscious/unconscious feedback, which allows online collection of implicit feedback using the software FaceReader 7.

The authors noticed the different moods of the two groups of respondents when they answered the question about what they associate with the smell of bakery products. The Spanish respondents were slightly pleasantly disposed, while the Slovak respondents were slightly unpleasantly disposed. The smell of bakery products evoked more memories and emotions in the Spanish respondents than in the Slovak respondents, which can be explained by the higher pleasant mood. The main contribution of this work lies in the new opportunities to obtain feedback that can be used in marketing research and that rely not only on explicit but also implicit data. The extension of the methodological apparatus to implicit feedback presupposes some form of control of the data collected by the questionnaire. The use of biometric tools can represent an efficient alternative in terms of time and money to the use of neuroimaging tools in the selection/research of aromas for specific stores/departments.

It must be noted that the sample is small, and adequate conclusions cannot be made about entire population. Based on empirical findings and pandemic-related limitations, the authors plan to conduct similar research with real aroma samples and with even larger sample of tested respondents, considering weather, season, olfactory sensitivity (anosmia, hyposmia and normosmia) and participant fatigue (beginning and end of the week).

Today, marketers are facing the greatest challenge of how to attract consumers’ attention. Every individual has a different perception of the shopping environment based on his own experience, beliefs and attitudes. This is why new marketing techniques and approaches are becoming increasingly popular in the marketing environment.

El objetivo de esta investigación es examinar FaceReader como una herramienta para comparar las preferencias olfativas entre dos países. Concretamente, examinamos las preferencias olfativas de los clientes en el departamento de panadería de un supermercado en el mercado eslovaco y español.

El objetivo de este estudio es examinar las preferencias subconscientes/inconscientes en la selección de aromas adecuados para el departamento de panadería en el mercado eslovaco y español. En este caso, no se trata de una prueba sensorial cualitativa clásica de la percepción de fragancias. El objetivo es identificar las asociaciones de olores relacionados con el departamento de ventas seleccionado a través de imágenes de los aromas seleccionados. Se utiliza una plataforma especial para obtener comentarios subconscientes/inconscientes, que permite la recopilación en línea de comentarios implícitos utilizando el software FaceReader 7.

Observamos diferentes estados de ánimo de los dos grupos de encuestados cuando respondieron a la pregunta sobre qué asociaban con el olor de los productos de panadería. Los encuestados españoles estaban ligeramente más predispuestos hacia aromas más agradables, mientras que los encuestados eslovacos estaban ligeramente más predispuestos hacia aromas menos agradables. El olor de los productos de panadería evocó más recuerdos y emociones en los encuestados españoles que en los eslovacos, lo que puede explicarse por el estado de ánimo. La principal contribución de este trabajo radica en las nuevas oportunidades para obtener comentarios que pueden ser utilizados en investigaciones de marketing y que no solo se basan en datos explícitos, sino también implícitos. La ampliación del aparato metodológico para obtener comentarios implícitos presupone algún tipo de control de los datos recopilados mediante el cuestionario. El uso de herramientas biométricas puede representar una alternativa eficiente en términos de tiempo y dinero al uso de herramientas de neuroimagen en la selección/investigación de aromas para tiendas/departamentos específicos.

Debe tenerse en cuenta que la muestra utilizada es pequeña y no se pueden extrapolar conclusiones para toda la población. Basándonos en los resultados empíricos y con las limitaciones relacionadas con la pandemia, planeamos realizar una investigación similar con muestras de aroma reales y con una muestra aún más grande de encuestados, considerando el clima, la temporada, la sensibilidad olfativa (anosmia, hiposmia, normosmia) y la fatiga de los participantes (inicio y fin de semana).

Hoy en día, los profesionales del marketing se enfrentan al gran desafío de cómo atraer la atención de los consumidores. Cada individuo tiene una percepción diferente del entorno de compra basada en su propia experiencia, creencias y actitudes. Es por eso que las nuevas técnicas y enfoques de marketing se están volviendo cada vez más populares en el entorno del marketing.

本文旨在探讨FaceReader在比较斯洛伐克和西班牙两个国家的顾客嗅觉偏好方面的效用。我们以斯洛伐克和西班牙市场一家食品杂货店的面点部门顾客为研究对象, 考察其嗅觉偏好。

本研究的目标是探讨在斯洛伐克和西班牙市场选择适合面点部门的香气时潜在的/无意识的偏好。与传统的定性感官测试不同, 我们旨在通过选定香气的图像识别与选定销售部门相关的气味的联想, 并通过FaceReader 7软件在线收集隐性反馈。

我们观察到两组受访者在回答关于面点产品气味联想时的心境差异。西班牙受访者略带愉悦, 而斯洛伐克受访者略带不悦。西班牙受访者对面点产品的气味引起的记忆和情感更为丰富, 这可能是由更高愉悦心境所解释的。该研究的主要贡献在于提供了在营销研究中利用反馈的新机会, 该反馈不仅依赖于明确的数据, 还依赖于隐性数据。将方法学工具扩展到隐性反馈的前提是以某种形式对问卷收集的数据进行控制。在为特定商店/部门选择/研究香气方面, 相对于使用神经影像工具在时间和金钱方面的花费, 生物测定工具的使用可以作为高效替代。

由于本研究的样本量较小, 因此不能对整个人口做出充分的结论。基于经验发现和受到大流行病限制, 我们计划进行类似研究, 使用真实的香气样本, 并考虑更大规模的受试者样本, 同时考虑到天气、季节、嗅觉敏感度（嗅觉缺失、嗅觉减退、正常嗅觉）和参与者疲劳程度（周初和周末）对受试者的影响。

当今, 营销人员面临着吸引消费者注意的最大挑战。每个个体根据其自身经验、信仰和态度对购物环境有着不同的感知。因此, 在营销环境中, 新的营销技术和方法变得越来越受欢迎。

This paper aims to synthesize 6-ethyl-4-hydroxyquinolin-2(1H)-one as a new enol-type coupling component in the preparation of some 3-arylazo-4-hydroxyquinolin-2(1H)-one dyes and evaluate the solvent effects on their absorption in ultraviolet-visible spectra.

6-Ethyl-4-hydroxyquinolin-2(1H)-one was synthesized by thermal cyclocondensation reaction of N, N′-bis(4-ethylphenyl) malonamide at 130–140°C in polyphosphoric acid. This compound was then applied in the azo-coupling reaction with some aniline-based diazonium salts, so as to prepare seven new mono-heterocyclic azo dyes. The structures of the compounds were confirmed using mass spectroscopic technique. Fourier transform infra red (FT-IR) and 1H proton nuclear magnetic resonance (1H NMR) and carbon-13 nuclear magnetic resonance (13 C NMR) studies on the structure of the azo compounds revealed that they exist as two E- and Z-isomers of hydrazone tautomer both in solid and solution state. The effects of acid and base on the visible absorption spectra of the dyes were also evaluated and discussed.

Ultra violet-visible UV-vis absorption spectra of the dyes didn’t show significant variation by changing of solvents because of intramolecular H-bonding between proposed hydrazone forms and 2- and 4-keto functions in their structures. The spectra of the dyes were not sensitive to the addition of acid but were very sensitive to base.

The synthesized 3-arylazo-4-hydroxyquinolin-2(1H)-one dyes are new members in the 4-hydroxyquinolin-2(1H)-one azo dyes family, where very few details regarding the synthesis of such dyes are reported before in the literature. They are unique in terms of synthesis and spectral properties.

Artificial fruit ripening is hazardous to mankind. In the recent past, artificial fruit ripening is increasing gradually due to its commercial benefits. To discriminate the type of fruit ripening involved at the vendors’ side, there is a great demand for on-sight ethylene detection in a nondestructive manner. Therefore, this study aims to deal with a comparison of various laboratory and portable methods developed so far with high-performance metrics to identify the ethylene detection at fruit ripening site.

This paper focuses on various types of technologies proposed up to date in ethylene detection, fabrication methods and signal conditioning circuits for ethylene detection in parts per million and parts per billion levels. The authors have already developed an infrared (IR) sensor to detect ethylene and also developed a lab-based setup belonging to the electrochemical sensing methods to detect ethylene for the fruit ripening application.

The authors have developed an electrochemical sensor based on multi-walled carbon nanotubes whose performance is relatively higher than the sensors that were previously reported in terms of material, sensitivity and selectivity. For identifying the best sensing technology for optimization of ethylene detection for fruit ripening discrimination process, authors have developed an IR-based ethylene sensor and also semiconducting metal-oxide ethylene sensor which are all compared with literature-based comparable parameters. This review paper mainly focuses on the potential possibilities for developing portable ethylene sensing devices for investigation applications.

The authors have elaborately discussed the new chemical and physical methods of ethylene detection and quantification from their own developed methods and also the key findings of the methods proposed by fellow researchers working on this field. The authors would like to declare that the extensive analysis carried out in this technical survey could be used for developing a cost-effective and high-performance portable ethylene sensing device for fruit ripening and discrimination applications.