Search results

The purpose of this paper is to check the feasibility of using biomaterial such as of Phragmites-Australis (PA) in cement paste to achieve sustainable building materials.

In this study, cement pastes were prepared by adding locally produced PA fibers in four different volumes: 0%, 0.5%, 1% and 2% for a duration of 180 days. Bottles and prisms were subjected to chemical shrinkage (CS), drying shrinkage (DS), autogenous shrinkage (AS) and expansion tests. Besides, prism specimens were tested for flexural strength and compressive strength. Furthermore, a mathematical model was proposed to determine the variation length change as function of time.

The experimental findings showed that the mechanical properties of cement paste were significantly improved by the addition of 1% PA fiber compared to other PA mixes. The effect of increasing the % of PA fibers reduces the CS, AS, DS and expansion of cement paste. For example, the addition of 2% PA fibers reduces the CS, expansion, AS and DS at 180 days by 36%, 20%, 13% and 10%, respectively compared to the control mix. The proposed nonlinear model fit to the experimental data is appropriate with R2 values above 0.92. There seems to be a strong positive linear correlation between CS and AS/DS with R2 above 0.95. However, there exists a negative linear correlation between CS and expansion.

The PA used in this study was obtained from one specific location. This can exhibit a limitation as soil type may affect PA properties. Also, one method was used to treat the PA fibers.

The utilization of PA fibers in paste may well reduce the formation of cracks and limit its propagation, thus using a biomaterial such as PA in cementitious systems can be an environmentally friendly option as it will make good use of the waste generated and enhance local employment, thereby contributing toward sustainable development.

To the authors best knowledge, there is hardly any research on the effect of PA on the volume stability of cement paste. Therefore, the research outputs are considered to be original.

This paper covers the development of a novel defect model for concrete highway bridges. The proposed defect model is intended to facilitate the identification of bridge’s condition information (i.e. defects), improve the efficiency and accuracy of bridge inspections by supporting practitioners and even machines with digitalised expert knowledge, and ultimately automate the process.

The research design consists of three major phases so as to (1) categorise common defect with regard to physical entities (i.e. bridge element), (2) establish internal relationships among those defects and (3) relate defects to their properties and potential causes. A mixed-method research approach, which includes a comprehensive literature review, focus groups and case studies, was employed to develop and validate the proposed defect model.

The data collected through the literature and focus groups were analysed and knowledge were extracted to form the novel defect model. The defect model was then validated and further calibrated through case study. Inspection reports of nearly 300 bridges in China were collected and analysed. The study uncovered the relationships between defects and a variety of inspection-related elements and represented in the form of an accessible, digitalised and user-friendly knowledge model.

The contribution of this paper is the development of a defect model that can assist inexperienced practitioners and even machines in the near future to conduct inspection tasks. For one, the proposed defect model can standardise the data collection process of bridge inspection, including the identification of defects and documentation of their vital properties, paving the path for the automation in subsequent stages (e.g. condition evaluation). For another, by retrieving rich experience and expert knowledge which have long been reserved and inherited in the industrial sector, the inspection efficiency and accuracy can be considerably improved.

The purpose of this study is to offer a better and more effective hexacopter design for a 3 kg payload using finite element analysis (FEA), facilitating the use of different materials for different components that too without compromising strength.

A 3D computer-aided design (CAD) model of a hexacopter with a regular hexagonal frame is presented. Furthermore, a finite element model is developed to perform a structural analysis and determine Von Mises stress and strain values along with deformations of different components of the proposed hexacopter design.

The results establish that carbon fibre outperforms acrylonitrile butadiene (ABS) with respect to deformations. Within the permissible limits of the stress and strain values, both carbon fiber and ABS are suggested for different components. Thus, a proposed hexacopter offers lighter weight, high strength and low cost.

The use of different materials for different components is suggested by making use of static structural analysis. This encourages new research work and helps in developing new applications of hexacopter, and it has never been reported in literature. The suggested materials for the components of the hexacopter will prove to be suitable considering weight, strength and cost.

The global resolution of embracing dynamic and intertwined production systems has made it necessary to adopt viable systems like circular economy (CE) to ensure excellency in the business. However, in emerging countries, it is challenging to implement the CE practices due to the existing problems in the supply chain network, as well as due to the vulnerable financial condition of the business after the deadly hit of COVID-19. The main aim of this research is to determine the barriers to implementing CE considering the recent pandemic and suggest strategies to organizations to ensure CE for a cleaner environment and greener economy.

After an extensive literature review and validation from experts, 24 sub-barriers under the class of 6 main barriers are finalized by Pareto analysis, which is further analyzed via the best-worst method to determine the weight and rank of the barriers Further, fuzzy-Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method is used to rank the proposed startegies to overcome the analysed barriers.

The results identified “unavailability of initial funding capital”, “need long time investment”, “lack of integrating production system using advance technology” and “lack of strategic planning” as the most acute sub-barriers to CE implementation. Further, fuzzy TOPSIS method is used to suggest the best strategy to mitigate the ranked barriers. The results indicated “integrated design facility to CE”, “ensuring large scale funding for CE facility” as the best strategy.

This study will motivate managers to implement CE practices to enjoy proper utilization of the resources, sustainable benefits in business, and gain competitive advantage.

Periodically, a lot of work is done on CE practices but none of them highlighted the issues in the domain of the leather products industry (LPI) and COVID-19 toward achieving sustainability in production and consumption. Thus, some significant barriers and strategies to implement CE for achieving sustainability in LPI are highlighted in this study, which is a unique contribution to the literature.

While prior research has established that traumatic brain injury (TBI) is a risk factor for violent offending, there is little understanding of mechanisms that may underpin this relationship. This is problematic, as a better understanding of these mechanisms could facilitate more effective targeting of treatment. This study aims to address these gaps in the extant literature by examining TBI as a predictor of violent offending and test for mediation effects through cognitive constructs of dual systems imbalance and hostility among a sample of justice-involved youth (JIY).

The Pathways to Desistance data were analyzed. The first three waves of this data set comprising the responses of 1,354 JIY were analyzed. Generalized structural equation modeling was used to test for direct and indirect effects of interest. A bootstrap resampling process was used to compute unbiased standard errors for determining the statistical significance of mediation effects.

Lifetime experience of TBI was associated with increased violent offending frequency at follow-up. Hostility significantly mediated this relationship, but dual systems imbalance did not. This indicated that programming focused on reducing hostility among JIY who have experienced TBI could aid in reducing violent recidivism rates.

To the best of the author’s knowledge, this study was the first to identify significant mediation of the relationship between TBI and violent offending through hostility.