Search results

The use of Spirulina sp. in food is limited by its bitter flavour and low absorption in the gastrointestinal system. The purpose of this study is to develop encapsulated Spirulina-alginate beads and to determine the physicochemical properties, the release efficiency in the simulated gastrointestinal fluid and the sensory acceptance of the beads when added into a rose syrup beverage.

Spirulina-alginate beads were prepared based on 3 × 3 factorial experiments consisting of three concentrations (1%, 2% and 3%) of plain sodium alginate and three concentrations (1, 3 and 5%) (w/v) of Spirulina. Encapsulated Spirulina-alginate beads were evaluated for their encapsulation effectiveness, size, texture, morphology, colour, in vitro release rate and sensory properties.

Sample H (3% sodium alginate + 1% Spirulina) had higher encapsulation efficiency (82.3%) but less protein (38.2 ppm) than Sample J (3% sodium alginate + 5% Spirulina) which produced more protein (126.4 ppm) but had lower encapsulation efficiency (54.5%). Alginate was the primary factor affecting bead size, and the texture became harder at 3% sodium alginate but softer at 5% Spirulina. As the concentration of Spirulina increased, the intensity of the green colour diminished. The encapsulated samples released test was better than the control samples, and Sample B (1% sodium alginate + 1% Spirulina) was preferred by the panellists in the sensory study.

This newly developed encapsulated Spirulina will improve the beverage acceptability, minimize the bitterness and increase the release percentage of Spirulina in simulated gastrointestinal.

Gourd fibres (GF) are a natural biodegradable fibre material with excellent mechanical properties and high tensile strength. The use of natural fibres in composite materials has gained popularity in recent years due to their various advantages, including renewability, low cost, low density and biodegradability. Gourd fibre is one such natural fibre that has been identified as a potential reinforcement material for composites. However, it has low surface energy and hydrophobic nature, which makes it difficult to bond with matrix materials such as polyester. To overcome this problem, chemically adapted gourd fibre has been proposed as a solution. Chemical treatment is one of the most widely used methods to improve the properties of natural fibres. This research evaluates the feasibility and effectiveness of incorporating chemically adapted gourd fibre into polyester composites for industrial fabrication. The purpose of this study is to examine the application of chemically modified GF in the production of polyester composite engineering materials.

This work aims to evaluate the effectiveness of chemically adapted gourd fibre in improving the adhesion of gourd fibre with polyester resin in composite fabrication by varying the GF from 5 to 20 wt.%. The study involves the preparation of chemically treated gourd fibre through surface modification using sodium hydroxide (NaOH), permanganate (KMnO₄) and acetic acid (CH₃COOH) coupling agents. The mechanical properties of the modified fibre and composites were investigated. It was then characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) to determine the changes in surface morphology and functional groups.

FTIR characterization showed that NaOH treatment caused cellulose depolymerization and caused a significant increase in the hydroxyl and carboxyl groups, showing improved surface functional groups; KMnO₄ treatment oxidized the fibre surface and caused the formation of surface oxide groups; and acetic acid treatment induced changes that primarily affected the ester and hydroxyl groups. SEM study showed that NaOH treatment changed the surface morphology of the gourd fibre, introduced voids and reduced hydrophilic tendencies. The tensile strength of the modified gourd fibres increased progressively as the concentration of the modification chemicals increased compared to the untreated fibres.

This work presents the designed composite with density, mechanical properties and microstructure, showing remarkable improvements in the engineering properties. An 181.5% improvement in tensile strength and a 56.63% increase in flexural strength were got over that of the unreinforced polyester. The findings from this work will contribute to the understanding of the potential of chemically adapted gourd fibre as a reinforcement material for composites and provide insights into the development of sustainable composite materials.

After completion of this case study, students will be able to apply the triple bottom line concept to a spice manufacturing and export company (RBT 3); to examine the options before Value Ingredients Private Limited (VIPL), namely, to cultivate spices in the traditional way versus adopting integrated pest management (IPM) to cater to international markets (RBT 4); to analyse the returns for an IPM farmer vis-à-vis a conventional farmer, and to compare the returns therein (RBT 4); and to evaluate the ways and means of engaging farmers to change their way of cultivation (RBT 5)

The COVID-19 pandemic heightened awareness about the benefits of spices and buoyed its demand worldwide, which presented an opportunity to VIPL, a spice manufacturing company based in Chennai, to expand its business. However, the export markets demanded residue-free spices grown with little or no use of pesticides. Traditional farmers supplying spices to VIPL were accustomed to spraying pesticides whenever there was a pest attack. This case study discussed the options that the protagonist Mr Sijil Karim, managing director and CEO of VIPL, had, who wanted to onboard farmers for pesticide-free cultivation. The options before him were either to continue traditional farming or adopt IPM. This case study discussed the merits, demerits and challenges of each of these options.

The triple bottom line concept discussed three Ps – people, planet and prosperity – for this case as follows: The farmers and the consumers constituted the people in the spice supply chain. The farmers supplying organic, export-worthy spices under the guidance of VIPL gained 30% more than regular spice farmers, which were accrued through cost savings and better prices. The consumers benefitted from the pesticide-free, organic spices through accrued health gains. The manufacture of organic, pesticide-free spices helped the planet, as the process did not release hazardous chemicals into the atmosphere. VIPL manufactured pesticide-free spice with a focus on prosperity.

The case study can be introduced in a course on sustainability while discussing the triple bottom line concept. This case study showed how a for-profit company grew without losing sight of the planet or its focus on people. This case is best suited for students who have preliminary knowledge of supply chain management, operations and sustainability. Therefore, it is suited for sophomore-year students of MBA.

Teaching notes are available for educators only.

CSS 11: Strategy.

Although healthcare and healthy living are integral to the Sustainable Development Goals (SDGs) for 2030, the coronavirus epidemic has dealt a devastating blow to these efforts. As governments and policymakers were compelled to shift their focus to lockdowns, sustenance, procurement, and distribution of vaccines, the momentum for health initiatives slowed, and the already fragile health systems of emerging markets were subjected to additional shocks. However, in many underserved regions of the globe, the introduction of technology has greatly facilitated the distribution and adoption of healthcare services.

This chapter highlights mini-cases from four emerging nations: Bangladesh, Nigeria, Vietnam, and the Philippines. Although the countries are emerging, each one of them are in a distinct stage of development and face a unique set of healthcare-related challenges. The chapter showcases how four different organizations based in these countries leveraged the use of technology to take healthcare services to underserved populations. In doing so, they addressed the key challenges of imparting healthcare: geographic accessibility, availability, financial accessibility, and acceptability.

This chapter concludes with a discussion of the implications of expanding healthcare industries leading to increased healthcare waste. To prevent mass population exposure to hazardous substances, the emergence of intelligent healthcare waste collection and disposal systems will be an absolute necessity. Hence, with the development of healthcare services, governments and policymakers need to mechanize smart waste management systems to safeguard humans, animals, and the environment.

We conduct a multidisciplinary systematic literature review on climate neutrality in the supply chain. While carbon neutrality has gained prominence, our study argues that achieving carbon neutrality alone is not enough to address climate change effectively, as non-CO₂ greenhouse gases (GHG) are potent contributors to global warming.

We used multiple databases, including EBSCO, ProQuest, Science Direct, Emerald and Google Scholar, to identify articles related to climate neutrality in the context of non-CO₂ gases. A total of 71 articles in environmental science, climate change, energy systems, agriculture and logistics are reviewed to provide insights into the climate neutrality of supply chains.

We find that, in addition to CO₂, other GHG such as methane, nitrous oxide, ozone and fluorinated gases also significantly contribute to climate change. Our literature review identified several key pillars for achieving net-zero GHG emissions, including end-use efficiency and electrification, clean electricity supply, clean fuel supply, “GHG capture, storage and utilization,” enhanced land sinks, reduced non-CO₂ emissions and improved feed and manure management.

We contribute to the literature on climate neutrality of supply chains by emphasizing the significance of non-CO₂ GHG along with CO₂ and highlighting the need for a comprehensive approach to climate neutrality in addressing climate change. This study advances the understanding of climate neutrality of supply chains and contributes to the discourse on effective climate change mitigation strategies. It provides clear future research directions.

The emerging industrial revolution referred to as Industry 5.0 is focusing on leveraging human creativity with intelligent and autonomous systems to derive user-friendly work environment for the businesses. Industry 5.0 stresses on people centric work ecosystem, zero accident policy and the well-being of labour within the production processes. This approach of Industry 5.0 to obtain human-centric safety solutions through the deployment of digital technologies deduces workplace accidents and costs leading to the development of Safety 4.0. This chapter aims to investigate the opportunities and challenges of Safety 4.0 and its enabling technologies aspiring towards the greater impact on safety management. Further, we have proposed a framework for the role of human centric digital transformations concerning safety in the manufacturing industry propelling Safety 4.0. Concluding, we discuss the implications for managers and practitioners. We found that Safety 4.0 will strengthen industrial safety, and instead of reacting to accidents, the concept evolved towards a preventive and proactive approach for a healthy industrial ecosystem.

The CEEQUAL certification system promotes sustainable development (SD) principles in infrastructure construction, with 12 categories of criteria and indicators. ENVISION assigns 60 points to five categories, while Green Guide is divided into seven classifications. SD certification requires 11 requirements, including an ecological assessment procedure, life-cycle costing assessment, quality control plan, noise mitigation plan, waste management plan, pollution prevention plan, low impact development, pavement management system, site maintenance plan, and educational outreach. SD certification technique provides 8 critical criteria, 153 standards, 17 stringent prerequisites, and 8 categories of points. Culp (2011) developed a grading system to incorporate SD principles into infrastructure projects; Shen et al. (2011) explored significant assessment parameters for the SD of infrastructure projects using the fuzzy set method; Lui and Cui (2012) studied SD frameworks for building projects, Montgomery et al. (2014) and Lim (2009) identified 77 major SD indicators based on a comprehensive review of the relevant literature, and the Transport Division of New South Wales established a Transportation Project Sustainability Framework to ensure the long-term viability of their transportation network and the continuous improvement of their environmental and sustainability performance. Assah Amiril (2014) revealed a global network of 27 SD criteria produced by professionals, for-profit and non-profit organizations, divided into five groups: ecological, financial, sociological, engineering, asset use, and project management. The most important details in this study are that 57 indicators were categorized into eight types, weighted according to their respective impacts, and the influence of each component on SD was evaluated using a 100-dimensional scale. This study investigated the eight criteria and the impact of three additional criteria (public participation, climate change response, and stakeholder management). This chapter examined the criteria and indicators of SD criteria and indicators for road infrastructure development in developing countries. The most important findings are that the CEEQUAL, Ugwu, Haupt, and Lim models are the most comprehensive theoretical models of SD requirements for infrastructure design, and that all frameworks and models promote the sharing, promotion, and acknowledgement of SD concepts.

This paper aims to investigate the thermal stability and hydrophobicity of difference alkyl chain of silanes with silicon (Si) micro- and nanoparticles.

Sol-gel methods have been used to design superhydrophobic glass substrates through surface modification by using low-surface-energy Isooctyl trimethoxysilane (ITMS) and Ethyl trimethoxysilane (ETMS) solution. Hierarchical double-rough scale solid surface was built by Si micro- and nanoparticles to enhance the surface roughness. The prepared sol was applied onto glass substrate using dip-coating method and was dried at control temperature of 400°C inside the tube furnace.

The glass substrate achieved the water contact angle as high as 154 ± 2° and 150.4 ± 2° for Si/ITMS and Si/ETMS films, respectively. The Si/ITMS and Si/ETMS also were equipped with low sliding angle as low as 3° and 5°, respectively. The Si micro- and nanoparticles in the coating system have created nanopillars between them, which will suspend the water droplets. Both superhydrophobic coatings have showed good stability against high temperature up to 200°C as there are no changes in WCA shown by both coatings. Si/ITMS film sustains its superhydrophobicity after impacting with further temperature up to 400°C and turns hydrophobic state at 450°C.

Findings will be useful to develop superhydrophobic coatings with high thermal stability.

Sol method provides a suitable medium for the combination of organic-inorganic network to achieve high hydrophobicity with optimum surface roughness.

Application of different alkyl chain groups of silane resin blending with micro- and nanoparticles of Si pigments develops superhydrophobic coatings with high thermal stability.

This study aims to explore the managerial conception of the determinants and barriers of sustainability integration into management control systems (MCS) of manufacturing companies in Sri Lanka. Although existing literature has explored the factors that influence the adoption of specific management controls to handle environmental and social issues, the role of management conception has been underrepresented. Specifically, literature is scarce in identifying contextual and organisational factors that influence corporates beyond mere adoption of controls but to integrate with regular controls, especially in developing countries such as Sri Lanka.

A multiple case study approach has been used to identify the management conception of barriers and enablers for sustainability control integration. The analysis is conducted based on a theoretical framework extending the work of Gond et al. (2012) and George et al. (2016). To obtain an in-depth and multifaceted view, semi-structured interviews were conducted with managers in charge of different functional departments of five manufacturing companies.

The findings identified managers’ perceived factors, such as environmental impact, stakeholder pressure (customer, competitor and regulatory authorities) and top management commitment, showing a clear difference between strongly and weakly integrated companies. Contrary to the literature, domestic regulatory pressure and multinational ownership do not sufficiently drive MCS sustainability integration.

The findings have implications for managers and practitioners to anticipate the potential barriers and determinants of sustainability integration and provide guidance to take proper measures to deal with them when designing and implementing their MCS.

The study adds value to the literature by presenting a theoretical framework based on the triangulation of different theories to recognise the significance of management idea in sustainable integration. Furthermore, because sustainable integration of MCS is a novel idea, this research is one of the earlier attempts to highlight problems from the perspective of developing countries.

This study aims to investigate the relationship between business group affiliation and CO2 emissions in Chile, providing insights into the pollution externalities associated with business group structures and their implications for environmental performance.

A hand-matched sample of industrial facilities and subsidiaries of listed firms in Chile was utilized to analyze the CO2 emissions of business group-affiliated firms compared to stand-alone firms. Fixed-effect regression analysis and propensity score matching were employed to examine the differences in emissions levels.

The results suggest that firms affiliated with business groups have higher CO2 emissions in comparison to similar stand-alone firms. This suggests that business group structures may weaken the pressures for emission reduction and maintenance of public legitimacy among affiliated firms.

The findings of this study are subject to certain limitations, such as the use of a specific dataset from Chile and the inability to explore certain factors due to data constraints. For instance, we were unable to examine the separation between control and cash-flow rights as well as the influence of manager characteristics on pollution levels. Future research should address these limitations and expand the analysis to other emerging market countries to further investigate the impact of lax or ineffective environmental regulations on pollution outcomes.

The research findings have practical implications for investors and policymakers. Investors interested in environmentally sustainable investments should consider the higher pollution levels associated with business group-affiliated firms. Policymakers can use these findings to design more effective regulations and incentives to encourage emission reduction efforts within business group structures.

The study’s results emphasize the need for a comprehensive understanding of the environmental implications of business group affiliation. By recognizing the potential for higher emissions in business group structures, stakeholders can advocate for sustainable practices, encourage transparency and promote responsible environmental management within corporate entities.

This study contributes to the literature on corporate governance, climate risks and pollution externalities by providing an empirical evidence on the relationship between business group affiliation and CO2 emissions. It highlights the importance of considering the influence of corporate structures on environmental performance, particularly in the context of emerging market economies.

Este estudio tiene como objetivo investigar la relación entre la afiliación a grupos empresariales y las emisiones de CO2 en Chile, proporcionando información sobre las externalidades de contaminación asociadas con las estructuras de grupos empresariales y sus implicaciones para el desempeño ambiental de las empresas.

Se utilizó una muestra recolectada de manera manual de instalaciones industriales y subsidiarias de empresas listadas en Chile para analizar las emisiones de CO2 de empresas afiliadas a grupos empresariales en comparación con empresas independientes. Se emplearon análisis de regresión de efectos fijos y modelos de emparejamiento por puntaje de propensión para examinar las diferencias en los niveles de emisiones.

Los resultados sugieren que las empresas afiliadas a grupos empresariales tienen mayores emisiones de CO2 en comparación con empresas independientes similares. Esto sugiere que las estructuras de grupos empresariales pueden debilitar las presiones para la reducción de emisiones y el mantenimiento de la legitimidad pública entre las empresas afiliadas.

Este estudio contribuye a la literatura sobre gobierno corporativo, riesgos climáticos y externalidades de contaminación al proporcionar evidencia empírica sobre la relación entre la afiliación a grupos empresariales y las emisiones de CO2. Destaca la importancia de considerar la influencia de las estructuras corporativas en el rendimiento ambiental, especialmente en el contexto de las economías de mercados emergentes.

Los hallazgos de este estudio están sujetos a ciertas limitaciones, como el uso de un conjunto de datos específico de Chile y la incapacidad para explorar ciertos factores debido a restricciones de datos. Por ejemplo, no pudimos examinar la influencia de las características de los ejecutivos de las empresas en los niveles de contaminación. Investigaciones futuras deberían abordar estas limitaciones y ampliar el análisis a otros países de mercados emergentes para investigar más a fondo el impacto de regulaciones ambientales laxas o ineficaces en los resultados de contaminación.

Los hallazgos de la investigación tienen implicaciones prácticas para inversores y responsables políticos. Los inversores interesados en inversiones ambientalmente sostenibles deben tener en cuenta los niveles más altos de contaminación asociados con empresas afiliadas a grupos empresariales. Los responsables políticos pueden utilizar estos hallazgos para diseñar regulaciones más efectivas e incentivos para fomentar los esfuerzos de reducción de emisiones dentro de las estructuras de grupos empresariales.

Los resultados del estudio enfatizan la necesidad de comprender de manera integral las implicaciones ambientales de la afiliación a grupos empresariales. Al reconocer el potencial de mayores emisiones en las estructuras de grupos empresariales, los interesados pueden abogar por prácticas sostenibles, fomentar la transparencia y promover una gestión ambiental responsable dentro de las entidades corporativas.