Search results

1 – 10 of 47
Article
Publication date: 13 February 2024

Mark Adrian Govier

This study aims to identify the political alignment and political activity of the 11 Presidents of Britain’s most important scientific organisation, the Royal Society of London…

Abstract

Purpose

This study aims to identify the political alignment and political activity of the 11 Presidents of Britain’s most important scientific organisation, the Royal Society of London, in its early years 1662–1703, to determine whether or not the institution was politically aligned.

Design/methodology/approach

There is almost no information addressing the political alignment of the Royal Society or its Presidents available in the institution’s archives, or in the writings of historians specialising in its administration. Even reliable biographical sources, such as the Oxford Dictionary of National Biography provide very limited information. However, as 10 Presidents were elected Member of Parliament (MP), The History of Parliament: British Political, Social and Local History provides a wealth of accurate, in-depth data, revealing the alignment of both.

Findings

All Presidents held senior government offices, the first was a Royalist aristocrat; of the remaining 10, 8 were Royalist or Tory MPs, 2 of whom were falsely imprisoned by the House of Commons, 2 were Whig MPs, while 4 were elevated to the Lords. The institution was Royalist aligned 1662–1680, Tory aligned 1680–1695 and Whig aligned 1695–1703, which reflects changes in Parliament and State.

Originality/value

This study establishes that the early Royal Society was not an apolitical institution and that the political alignment of Presidents and institution continued in later eras. Furthermore, it demonstrates how the election or appointment of an organisation’s most senior officer can be used to signal its political alignment with government and other organisations to serve various ends.

Details

Journal of Management History, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1751-1348

Keywords

Article
Publication date: 6 October 2023

Benjamin Charles Adams

This work examines the returns to education for workers who pursue additional education after time out of the labor force. It compares those who remain in the labor force during…

Abstract

Purpose

This work examines the returns to education for workers who pursue additional education after time out of the labor force. It compares those who remain in the labor force during additional education with those who drop out of the labor force during additional education. It compares two cohorts of the National Longitudinal Survey of Youth (NLSY).

Design/methodology/approach

This work utilizes a difference equation to estimate the returns to education for workers who pursue additional education after time spent out of school and in the labor force.

Findings

The results indicate a sheepskin return of approximately 14% for those who remain in the labor force and a return of approximately 9% to years of additional education for those who drop out of the labor force. This contrasting pattern of returns is robust to sample selection correction and a variety of checks.

Research limitations/implications

This work does not fully account for all threats to causation. Further research could pursue these and make use of data from more clearly defined periods of education.

Practical implications

This work finds key differences between the internal labor market faced by those remaining in the labor force and the external labor market faced by those dropping out of the labor force. A policy focused on re-training workers should account for these differences.

Originality/value

This is the first work to compare workers who pursue additional education while remaining in the labor force to workers who pursue additional education and drop out of the labor force.

Details

International Journal of Manpower, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 0143-7720

Keywords

Article
Publication date: 19 October 2022

Fariba Ramezani, Amir Arjomandi and Charles Harvie

As a by-product of the production process, emissions can follow output fluctuations. Hence, disregarding the relationship between economic fluctuations and emissions could result…

Abstract

Purpose

As a by-product of the production process, emissions can follow output fluctuations. Hence, disregarding the relationship between economic fluctuations and emissions could result in undesirable environmental outcomes. This study aims to investigate the environmental and economic effects of abatement subsidies on overall emissions during business cycles in Australia.

Design/methodology/approach

A real business cycle (RBC) model is devised and parameterised in this paper. RBC models have been recently introduced to environmental policy analysis, and this study contributes to the literature by investigating the effects of a potential subsidy policy in an RBC framework. The model is also calibrated and provides solutions for the Australian economy.

Findings

The authors find that under a steady-state situation, supporting abatement can result in reducing emissions by 6.45% while it imposes welfare costs to the economy (by 0.61%). Simulation results show that an optimal abatement policy should be pro-cyclical, with the abatement subsidy increasing during expansions and decreasing during recessions. As well, in a subsidy policy setting, emissions would react pro-cyclically, i.e. emissions increase (decrease) when the gross domestic product increases (decreases). The abatement reaction by firms, however, is different, because when a positive productivity shock occurs, firms reduce abatement and allocate resources to production. Nonetheless, as time passes, the increased subsidy provides a strong enough incentive to allocate resources to abatement and, subsequently, abatement increases.

Originality/value

This paper investigates how an emission reduction subsidy should be adapted to macroeconomic fluctuations so that it can limit variations in emissions.

Details

Studies in Economics and Finance, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1086-7376

Keywords

Article
Publication date: 4 January 2024

Dirk H.R. Spennemann

Invented in late 1890s, asbestos cement sheeting rose to prominence during the post-Second World War period as a building material for low-cost housing by state housing…

Abstract

Purpose

Invented in late 1890s, asbestos cement sheeting rose to prominence during the post-Second World War period as a building material for low-cost housing by state housing commissions and low-income families (“fibro homes”). The adverse health effects of asbestos fibres in the building industry and home renovation activities are well documented. Fibro homes of the 1950s and 1960s are increasingly coming under the gaze of heritage studies, which brings to the fore the question of how to deal with the asbestos cement sheeting most are clad with.

Design/methodology/approach

This paper provides the first systematic review to assess the literature (126 papers were identified in Google Scholar and scanned for content) on the conservation management of asbestos cement sheeting in heritage properties.

Findings

Overall, engagement with the conservation management of asbestos cement sheeting in heritage properties was low, with only two sources dealing with asbestos cement sheeting in any level of detail. The studies note that if asbestos cement sheeting is in good condition, it should be left alone. Numerous conservation and repair options do exist, in particular the application of (coloured) sealants that extend the life of asbestos cement sheets and asbestos cement roofing.

Originality/value

This paper represents the first systematic review to assess conservation management options for asbestos cement sheeting in heritage properties.

Details

International Journal of Building Pathology and Adaptation, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2398-4708

Keywords

Open Access
Article
Publication date: 8 May 2023

Arosha Adikaram and Ruwaiha Razik

This paper aims to explore the motivations behind women in a developing South Asian country – Sri Lanka – to embark on entrepreneurship in science, technology, engineering and…

1268

Abstract

Purpose

This paper aims to explore the motivations behind women in a developing South Asian country – Sri Lanka – to embark on entrepreneurship in science, technology, engineering and mathematics (STEM) fields, which is a doubly masculine hegemony operating within a culturally nuanced gendered context.

Design/methodology/approach

The study employs a qualitative research approach, conducting in-depth semi-structured interviews with 15 STEM women entrepreneurs, following the theoretical lenses of push and pull motivation theory and gender role theory.

Findings

Although the motivations of STEM women entrepreneurs cannot be exclusively categorized as either push or pull factors, the pull factors had a greater influence on the participants in motivating them to become entrepreneurs. The primary motivators for starting businesses in STEM were: inspiration from something or someone, inner calling, the identification of business opportunities, the need for flexibility, necessity and/or desire to help society. It was often difficult to identify one dominant motivator in many instances, as many factors were interlinked to motivate women to start a business. The study also revealed that gender ideologies could stifle the participants' motivation, while the inner need to break these gender ideologies implicitly stimulated their motivation.

Originality/value

The study contributes to and expands the knowledge of STEM women entrepreneurs in general and to the limited existing knowledge of STEM women entrepreneurs in developing countries specifically. The paper brings contextual novelty as Sri Lanka produces more female STEM graduates than men, which is unique compared to most other parts of the world.

Details

Journal of Business and Socio-economic Development, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2635-1374

Keywords

Open Access
Article
Publication date: 31 July 2023

Christiaan Ernst (Riaan) Heyman

This study aims to, firstly, develop a red flag checklist for cryptocurrency Ponzi schemes and, secondly, to test this red flag checklist against publicly available marketing…

1641

Abstract

Purpose

This study aims to, firstly, develop a red flag checklist for cryptocurrency Ponzi schemes and, secondly, to test this red flag checklist against publicly available marketing material for Mirror Trading International (MTI). The red flag checklist test seeks to establish if MTI’s marketing material posted on YouTube® (in the form of a live video presentation) exhibits any of the red flags from the checklist.

Design/methodology/approach

The study uses a structured literature review and qualitative analysis of red flags for Ponzi and cryptocurrency Ponzi schemes.

Findings

A research lacuna was discovered with regard to cryptocurrency Ponzi scheme red flags. By means of a structured literature review, journal papers were identified that listed and discussed Ponzi scheme red flags. The red flags from the identified journal papers were subsequently used in a qualitative analysis. The analyses and syntheses resulted in the development of a red flag checklist for cryptocurrency Ponzi schemes, with five red flag categories, containing 18 associated red flags. The red flag checklist was then tested against MTI’s marketing material (a transcription of a live YouTube presentation). The test resulted in MTI’s marketing material exhibiting 88% of the red flags contained within the checklist.

Research limitations/implications

The inherent limitations in the design of using a structured literature review and the lack of research regarding the cryptocurrency Ponzi scheme red flags.

Practical implications

The study provides a red flag checklist for cryptocurrency Ponzi schemes. The red flag checklist can be applied to a cryptocurrency investment scheme’s marketing material to establish if it exhibits any of these red flags.

Social implications

The red flag checklist can be applied to a cryptocurrency investment scheme’s marketing material to establish if it exhibits any of these red flags.

Originality/value

The study provides a red flag checklist for cryptocurrency Ponzi schemes.

Details

Journal of Financial Crime, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1359-0790

Keywords

Open Access
Article
Publication date: 3 June 2022

XiYue Deng, Xiaoming Li, Zhenzhen Chen, Mengli Zhu, Naixue Xiong and Li Shen

Human group behavior is the driving force behind many complex social and economic phenomena. Few studies have integrated multi-dimensional travel patterns and city interest points…

669

Abstract

Purpose

Human group behavior is the driving force behind many complex social and economic phenomena. Few studies have integrated multi-dimensional travel patterns and city interest points to construct urban security risk indicators. This paper combines traffic data and urban alarm data to analyze the safe travel characteristics of the urban population. The research results are helpful to explore the diversity of human group behavior, grasp the temporal and spatial laws and reveal regional security risks. It provides a reference for optimizing resource deployment and group intelligence analysis in emergency management.

Design/methodology/approach

Based on the dynamics index of group behavior, this paper mines the data of large shared bikes and ride-hailing in a big city of China. We integrate the urban interest points and travel dynamic characteristics, construct the urban traffic safety index based on alarm behavior and further calculate the urban safety index.

Findings

This study found significant differences in the travel power index among ride-sharing users. There is a positive correlation between user shared bike trips and the power-law bimodal phenomenon in the logarithmic coordinate system. It is closely related to the urban public security index.

Originality/value

Based on group-shared dynamic index integrated alarm, we innovatively constructed an urban public safety index and analyzed the correlation of travel alarm behavior. The research results fully reveal the internal mechanism of the group behavior safety index and provide a valuable supplement for the police intelligence analysis.

Details

Data Technologies and Applications, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2514-9288

Keywords

Open Access
Article
Publication date: 1 May 2020

Athbi Zaid Khalaf

The purpose of this study is to cover the change that happened in the American foreign policy toward Iran by changing the American leadership from Obama to Trump. In addition to…

4139

Abstract

Purpose

The purpose of this study is to cover the change that happened in the American foreign policy toward Iran by changing the American leadership from Obama to Trump. In addition to its coverage for the Iranian foreign policy toward the Arab region during the presidency period of Obama in the USA and also during the presidency period of Trump, to discover whether a change has happened in the Iranian foreign policy toward the Arab region is a result of the change in the American foreign policy or not. This can be discovered by concentrating on Yemen, Syria and Iraq, taking into consideration the Iranian and American national interests in the Arab region, as well as the regional role of Iran and its intervention in the Arab region.

Design/methodology/approach

This study was based on the analytical method of the foreign policy that is based on analyzing facts and events, as well as analyzing the roles and interests within the framework of the states’ foreign policy. This method was used in the study for the purpose of analyzing the impact of the change in the American leadership from Obama to Trump on the US foreign policy toward Iran in the light of the American interest; in addition to the Iranian foreign policy toward the Arab region (Yemen, Syria and Iraq) in the presidency period of both Obama and Trump in light of the regional role of Iran and its passion to achieve its national interest.

Findings

The study concluded that the change in the American foreign policy toward Iran is a result of the change of the American leadership from Obama to Trump by the American interest requirements in accordance to the respective of both of them. The change in the American policy led to a change in the trends of the Iranian foreign policy toward the Arab region in the term of the regional Iranian role. Under the American and Iranian convergence in the period of Obama, the Iranian role in the Arab region was limited to what could achieve its national interest and what did not threaten the American interest, especially after Iran had guaranteed that the USA is by its side. In the framework of the American and Iranian confrontation under Trump’s current presidency, the Iranian role has expanded in the Arab region, where Iran has intensified its intervention in Yemen, Syria and Iraq politically and militarily. Iran became more threatening to the American interest, as it became a means of pressure to the USA under Trump’s ruling in the purpose of changing its position toward it.

Originality/value

The importance of the study stems from the fact that it is seeking to analyze the change of the American foreign policy toward Iran within the period of two different presidential years of Obama and Trump, whereas, their trends were different in dealing with Iran between rapprochement and hostility toward it, on the basis of the American interest. In addition to testing whether this change in the American foreign policy toward Iran has been accompanied by a change in the Iranian foreign policy toward the Arab region.

Details

Review of Economics and Political Science, vol. no.
Type: Research Article
ISSN: 2356-9980

Keywords

Article
Publication date: 7 March 2023

Nazmiye Tufan Tolmaç and Özlenen Erdem İşmal

This study aims to produce textile-like surfaces using fused deposition modelling (FDM) 3D printers and create a garment collection.

Abstract

Purpose

This study aims to produce textile-like surfaces using fused deposition modelling (FDM) 3D printers and create a garment collection.

Design/methodology/approach

Experiments were conducted using different types of materials in FDM 3D printers until the sufficient flexibility was achieved to create textile-like structures. During the research, properties of polylactic acid (PLA), acrylonitrile butadiene styrene (ABS) and thermoplastic polyurethane (TPU) were observed. Geometrical patterns were printed and each of them gave a different result depending on the pattern. Based on the information obtained from the experiments, a garment collection with four total looks was designed inspired by Vivaldi’s “Four Seasons”.

Findings

Among the materials used, TPU, a flexible filament, yielded the best results. Because of the rigid properties of PLA and ABS, chain-like structures were printed to create relatively flexible surfaces, but the results were still not successful enough to create a clothing material. Therefore, TPU was preferred for the garment material selection.

Originality/value

In this study, combinations of 3D printed flexible structures and different types of fabrics were used to create a garment collection. It was concluded that, with the right material selection, 3D printing can be used as an alternative method to create a new aesthetic language in fashion design.

Details

Research Journal of Textile and Apparel, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1560-6074

Keywords

Article
Publication date: 26 December 2023

Joshin John and Neetha J. Eappen

This paper investigates how agile capabilities in humanitarian settings work in combination, and its effects on performance outcome. The study was conducted in the frame of…

Abstract

Purpose

This paper investigates how agile capabilities in humanitarian settings work in combination, and its effects on performance outcome. The study was conducted in the frame of reference of response operations during cyclones and floods, which is considered most complex and with the most widespread impact.

Design/methodology/approach

A survey-based method was used to collect empirical data on response operations from 131 field officers who were involved in disaster response during cyclones or floods. A partial least square based structural equation model was used to study the path model of interaction of agile capabilities, and their effect on performance outcomes.

Findings

The results show that integration of agile capabilities is important for enhancing effectiveness of humanitarian response. The results indicated a serial mediation effect involving visibility, responsiveness and flexibility capability on the effectiveness of emergency response.

Research limitations/implications

This research has implications for response units of humanitarian organisations. This includes capacity building for key agile capabilities, integration, supply chain re-configuration and differential positioning of response phase as against preparedness and recovery phases.

Originality/value

This study is unique for the chosen humanitarian setting, which is considered most difficult. The authors demonstrate from empirical evidence the interaction effects of agile capabilities during response phase for cyclones and floods, and their impact. The research insights will help practitioners to configure and position supply chains for better effectiveness during response operations, which have markedly different objectives vis-à-vis other phases or types of humanitarian settings.

Details

International Journal of Emergency Services, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2047-0894

Keywords

1 – 10 of 47