Search results

The purpose of this paper is to explore inhalation levels and dermal exposure to toluene among printing workers who wore no personal protective equipment; it is conducted in a plastic bag factory. Using a charcoal cloth pad (CCP) as a dermal sampler to assess skin permeation of liquid toluene is also investigated.

In total, 27 stationary air samples as well as urine and dermal samples were collected over 9 days from 11 printing workers. Six pieces of CCP were wrapped on each of the workers’ fingers for the dermal sample collection. Air samples were collected and analyzed according to NIOSH No. 1501, and 65 post-shift urine samples were collected and analyzed using gas chromatography equipped with headspace sampler (GC-HS/FID). Multiple linear regression was employed to analyze the association between the studied variables.

The mean (SD) urinary toluene (UTol) level was 13.42 (9.72) ug/L. Toluene on the CCP (TolCCP) was a meaningful predictor for UTol (p-value=0.027) with r and r² values of 0.441 and 0.195, respectively. The r and r² of the model using the toluene time-weighted average concentrations in air were 0.739 and 0.546, respectively. The absorbed dose of toluene determined from the TolCCP ranged from 1.05 to 91.94 mg, accounting for 12.3 percent of the threshold limit value (TLV).

Dermal exposure was insignificant when workers wore respirators, but when not, dermal absorption could contribute to the overall uptake and exposure above the TLV. Appropriate gloves should be assigned to the workers to reduce dermal exposure to toluene.

The purpose of this paper is to investigate the practices that start-ups in emerging economies can implement to design circular economy business models and how they can create and capture value from a circular economy business model.

The paper adopts a qualitative case method approach with semi-structured interviews with start-up founder promoters, its employees, its beneficiaries and its customers, conducted in two local Indian start-ups engaged in the manufacture of products and providing services that promote adoption of circular economy principles.

Analysis of the two business models reveals common patterns in building value proposition. The findings suggest that start-up ventures adopt an iterative approach to produce reusable and interlinked products and co-create with customers, vendors and local communities. They adopt mechanisms that can create, deliver and capture value while maintaining economic viability, and thus contribute towards micro- and macro-level benefits.

This study maximizes the depth of the phenomenon under investigation by leveraging case study methodology. Future research opportunities could be found in quantitative studies to increase the generalizability of the findings of this paper.

The paper presents a theoretical model linking the circular business model design and deployment mechanisms that can be used by start-up entrepreneurs desirous of embracing circular economy principles and thus contribute towards environmental, economic and developmental goals in emerging economies.

To accelerate the transition of adoption of circularity principles in emerging markets, start-up ventures could adopt circular business models that contribute towards achieving positive behavioural change. This can be achieved by integrating with different stakeholders in the value network such that they play a vital role in the process of value creation and delivery and benefit from the value captured.

An interdisciplinary approach that integrates the research streams of circular economy, and business model design has been pursued to identify the design and deployment mechanisms adopted in the circular business models of start-ups in real-world emerging economies’ context.

“All things are in a constant state of change”, said Heraclitus of Ephesus. The waters if a river are for ever changing yet the river endures. Every particle of matter is in continual movement. All death is birth in a new form, all birth the death of the previous form. The seasons come and go. The myth of our own John Barleycorn, buried in the ground, yet resurrected in the Spring, has close parallels with the fertility rites of Greece and the Near East such as those of Hyacinthas, Hylas, Adonis and Dionysus, of Osiris the Egyptian deity, and Mondamin the Red Indian maize‐god. Indeed, the ritual and myth of Attis, born of a virgin, killed and resurrected on the third day, undoubtedly had a strong influence on Christianity.

The COVID-19 pandemic has popularized wearing face masks for personal protection. However, the protection afforded by a mask is decreased if an individual accidently touches the outer surface of the mask and then touches other parts of their face. To overcome this problem, antimicrobial masks have become commercially available. However, many are disposable and/or made from synthetic antimicrobial agents which have a negative impact on the environment. The purpose of this study was to create material for stitching antimicrobial masks that are reusable and natural.

The authors developed natural antimicrobial finishes from Azadirachata indica, Butea monosperma and Litchi chinensis leaves. The authors used biodegradable polyurethane binder and pad-dry-cure method to apply them on 100% cotton fabric. The authors used Fourier-transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM) to confirm the application and ASTM E2149 to assess the efficacy and wash-resistance of the finish.

Fabric treated with leaves of A. indica, B. monosperma and L. chinensis showed 80%, 100 and 100% antimicrobial activity, respectively. All fabrics were washed 25 times in home laundry cycles and maintained 100% of their antimicrobial effect.

These findings highlight that B. monosperma and L. chinensis finishes on cotton fabric can be a used as a material for stitching antimicrobial, natural and reusable masks that provide more protection than traditional masks but do not pose the environmental concerns of disposable masks or synthetic finishes. This study can be furthered by performing more laundry cycles to determine if the finishes remain 100% effective beyond 25 cycles.

Cleanrooms are highly controlled enclosed rooms where air quality is monitored and ensured to have less contamination according to standard cleanliness level. Air filters are used to optimize indoor air quality and remove air pollutants. Filter media and filtering system are decided as per requirement. Depth filter media are mostly used in cleanroom filtrations. This paper aims to present a comprehensive review of the evolution of cleanroom filter media. It evaluates the advantages and disadvantages of air filter media. It is also studied which air filters have additional properties such as anti-microbial properties, anti-odour properties and chemical absorbent. Development and innovation of air filters and filtration techniques are necessary to improve the performance via the synergistic effect and it can be a possible avenue of future research.

This paper aims to drive the future of air filter research and development in achieving high-performance filtration with high filtration efficiency, low operational cost and high durability. Air pollutants are classified into three types: suspended particles, volatile organic pollutants and microorganisms. Technologies involved in purification are filtration, water washing purification, electrostatic precipitation and anion technology. They purify the air by running it through a filter medium that traps dust, hair, pet fur and debris. As air passes through the filter media, they function as a sieve, capturing particles. The fibres in the filter medium provide a winding path for airflow. There are different types of air filters such as the high-efficiency particulate air filter, fibreglass air filter and ultra-low particulate air filter.

Emerging filtration technologies and filters such as nanofibres, filters with polytetrafluoroethylene membrane are likely to become prevalent over the coming years globally. The introduction of indoor air filtration with thermal comfort can be a possible avenue of future research along with expanding indoor environment monitoring and improving air quality predictions. New air filters and filtration technologies having better performance with low cost and high durability must be developed which can restrict multiple types of pollutants at the same time.

The systematic literature review approach used in this paper highlights the emerging trends and issues in cleanroom filtration in a structured and thematic manner, enabling future work to progress as it will continue to develop and evolve.

WE regret to learn that the Leyton Borough Council has followed the bad example of East Ham in transferring its library responsibilities from the ad hoc Library Committee to the Education Committee. The case is worse than that of East Ham in that the Borough Council is not the education authority and the library system, with its library staff, consisting of men of life‐long experience, will be handed over to the County Education Committee. Such transfers are not made in order to promote the efficiency of the library but because the Councils are under the delusion that by some species of financial legerdemain a library service will be provided without payment on their part. As the promoters of the 1919 Act certainly did not intend any such actions as this, we hope that the Library Association may be able to do something before the transfer takes effect. Our hope, we are bound to admit, is a faint one.

Woven fabrics have been popularised in use owing to their superior properties and functionality. Today, weavers strive to add value to their product to be competitive and to secure profit in performance fabrics such as technical fabrics, smart fabrics and sportswear fabrics. Over the years, fabrics with special properties such as moisture management have gained higher demand. In this context, multi-layer fabrics provide a reasonable solution to the demand.

An attempt was made to develop two-layer fabrics with different compositions and properties. A two-layer woven fabric was produced using handloom weaving, with a hydrophobic inner layer and hydrophilic outer layer, the two layers being attached together using different stitching methods. Different fabric structures and yarn counts were used to achieve the objectives.

Experiments carried out verified the suitability of the developed fabric for effective moisture management. It was found that a fabric with a 100% cotton outer layer and 100% polyester inner layer, both layers of 2 × 2 matt weave, showed the best properties.

In the present COVID-19 pandemic situation, the use of masks in public has become mandatory in many countries. This research will help handloom manufacturers meet the need using simple methods.

This research uses handloom fabric. As such it provides an opportunity for small and medium enterprises to use available low-cost technology to develop fabric with superior properties.

T Education is a leading educational science and technology enterprise in China with technology-driven, talent intimacy and quality leadership as the core development objectives. Since its inception, it has been committed to creating better learning experience for children. As the predecessor of T-education, X-education was founded in Beijing in 2003. At first, it mainly provided after-school math counseling for school-age children. Over the past 10 years, its business has been expanding, covering almost every aspect of school-age education. This case studies accounting issues and business ethics challenges that firms may face when they transform from a single (traditional education) line of business to a multiple channel business.

On 2 September 2015, it was announced that Tom Ford would again be ‘dressing James Bond’, Daniel Craig, in Spectre (Mendes, 2015) after tailoring his suits for Quantum of Solace (Forster, 2008) and Skyfall (Mendes, 2012). Ford noted that ‘James Bond epitomises the Tom Ford man in his elegance, style and love of luxury. It is an honour to move forward with this iconic character’.

  With the press launch of ‘Bond 25’(and now titled No Time to Die) on 25 April 2019, it is reasonable to speculate that Ford will once again be employed as James Bond’s tailor of choice, given that it is likely to be Craig’s last outing as 007. Previous actors playing the role of James Bond have all had different tailors. Sean Connery was tailored by Anthony Sinclair and George Lazenby by Dimitro ‘Dimi’ Major. Roger Moore recommended his own personal tailors Cyril Castle, Angelo Vitucci and Douglas Hayward. For Timothy Dalton, Stefano Ricci provided the suits, and Pierce Brosnan was dressed by Brioni. Therefore, this chapter will analyse the role of tailoring within the James Bond films, and how this in turn contributes to the look and character of this film franchise more generally. It aims to understand how different tailors have contributed to the masculinity of Bond: an agent dressed to thrill as well as to kill.

In a previous article we have called attention to the danger of eating tinned and bottled vegetables which have been coloured by the addition of salts of copper and we have urged upon the public that no such preparations should be purchased without an adequate guarantee that they are free from copper compounds. Copper poisoning, however, is not the only danger to which consumers of preserved foods are liable. Judging from the reports of cases of irritant poisoning which appear with somewhat alarming frequency in the daily press, and from the information which we have been at pains to obtain, there can be no question that the occurrence of a large number of these cases is to be attributed to the ingestion of tinned foods which has been improperly prepared or kept. It is not to be supposed that the numerous cases of illness which have been ascribed to the use of tinned foods were all cases of metallic poisoning brought about by the action of the contents of the tins upon the metal and solder of the latter. The evidence available does not show that a majority of the cases could be put down to this cause alone; but it must be admitted that the evidence is in most instances of an unsatisfactory and inconclusive character. It has become a somewhat too common custom to put forward the view that so‐called “ptomaine” poisoning is the cause of the mischief; and this upon very insufficient evidence. While there is no doubt that the presence in tinned goods of some poisonous products of decomposition or organic change very frequently gives rise to dangerous illness, so little is known of the chemical nature and of the physiological effects of “ptomaines” that to obtain conclusive evidence is in all cases most difficult, and in many, if not in most, quite impossible. A study of the subject leads to the conclusion that both ptomaine poisoning and metallic poisoning—also of an obscure kind—have, either separately or in conjunction, produced the effects from time to time reported. In view of the many outbreaks of illness, and especially, of course, of the deaths which have been attributed to the eating of bad tinned foods it is of the utmost importance that some more stringent control than that which can be said to exist at present should be exercised over the preparation and sale of tinned goods. In Holland some two or three years ago, in consequence partly of the fact that, after eating tinned food, about seventy soldiers were attacked by severe illness at the Dutch manœuvres, the attention of the Government was drawn to the matter by Drs. VAN HAMEL ROOS and HARMENS, who advocated the use of enamel for coating tins. It appears that an enamel of special manufacture is now extensively used in Holland by the manfacturers of the better qualities of tinned food, and that the use of such enamelled tins is insisted upon for naval and military stores. This is a course which might with great advantage be followed in this country. While absolute safety may not be attainable, adequate steps should be taken to prevent the use of damaged, inferior or improper materials, to enforce cleanliness, and to ensure the adoption of some better system of canning.