Search results

Robots are widely used in industrial manufacturing and service industries around the world. However, most of the previous studies on industrial robots use data at the national or industry level in the context of developed countries. This study examines the impact of imported industrial robots on firm innovation at the firm level in China.

Drawing on a large dataset of more than three million records in China, including non-publicly traded small and medium firms, the authors adopt a difference-in-differences method to investigate the impact and channels of industrial robots on firm innovation.

The authors find that the application of industrial robots increases firm innovation. Two possible channels are identified through which robots promote innovation: alleviation of financial constraints and the improvement of human capital. Further analysis shows that the effect of robots on innovation is more pronounced for firms that are highly dependent on external financing, belong to high-tech industries, import high-end robots, have insufficient supply of skilled labor and private firms (non-SOEs). The authors also find that industrial robots increase the firms' innovation quality and the marginal contribution of innovation to firms' total factor productivity.

This study provides big data evidence of the unintended positive consequences of industrial robots on firm innovation. The results are helpful to clarify the controversy of industrial robots. It also has important implications for government industrial policy making, firm innovation and human resource management.

The color painting of ancient buildings has high historical and artistic value but is prone to aging due to long-term outdoor exposure. The purpose of this study is to develop a new type of sealing coating to mitigate the impact of ultraviolet (UV) light on color painting.

The new coating was subjected to a 500-h UV-aging test. Compared with the existing acrylic resin Primal AC33, the UV aging behavior of the new coating, such as color difference and gloss, was studied with aging time. The Fourier infrared spectra of the coatings were analyzed after the UV-aging test.

Compared with AC33, the antiaging performance of SF8 was substantially improved. SF8 has a lower color difference value and better light retention and hydrophobicity. The Fourier transform infrared spectroscopy results showed that the C-F bond and Si-O bonds in the resin of the optimized sealing coating protected the main chain C-C structure from degradation during the aging process; thus, the resin maintained good stability. The hindered amine light stabilizer TN292 added to the coating inhibited the antiaging process by trapping active free radicals.

To address the problem of UV aging of oil-decorated colored paintings, a new type of sealing coating with excellent antiaging properties was developed, laying the foundation for its demonstration application on the surface of ancient buildings.

Aqueous zinc-ion battery has broad application prospects in smart grid energy storage, power tools and other fields. Co₃O₄ is one of the ideal cathode materials for water zinc-ion batteries due to their high theoretical capacity, simple synthesis, low cost and environmental friendliness. Many studies were concentrated on the synthesis, design and doping of cathodes, but the effect of process parameters on morphology and performance was rarely reported.

Herein, Co₃O₄ cathode material based on carbon cloth (Co₃O₄/CC) was prepared by different temperatures hydrothermal synthesis method. The temperatures of hydrothermal reaction are 100°C, 120°C, 130°C and 140°C, respectively. The influence of temperatures on the microstructures of the cathodes and electrochemical performance of zinc ion batteries were investigated by X-ray diffraction analysis, scanning electron microscopy, cyclic voltammetry curve, electrochemical charging and discharging behavior and electrochemical impedance spectroscopy test.

The results show that the Co₃O₄/CC material synthesized at 120°C has good performance. Co₃O₄/CC nanowire has a uniform distribution, regular surface and small size on carbon cloth. The zinc-ion battery has excellent rate performance and low reaction resistance. In the voltage range of 0.01–2.2 V, when the current density is 1 A/g, the specific capacity of the battery is 108.2 mAh/g for the first discharge and the specific capacity of the battery is 142.6 mAh/g after 60 charge and discharge cycles.

The study aims to investigate the effect of process parameters on the performance of zinc-ion batteries systematically and optimized applicable reaction temperature.

This study aims to examine the role of authenticity in tourists’ destination selection, analyze the factors that influence tourists to form their initial opinions and explore how tourists construct the authenticity of traditional villages. The authors selected Chengkan village in Huizhou district, Huangshan city, as a case. In the study, the authors constructed an attribute-hardware-software research framework and analyzed tourists’ authentic emic experiences from the perspective of constructivism. The findings of this study suggest that tourists’ destination selection is influenced by authenticity. The destination culture brokers who interact with tourists play an essential role in forming authentic experiences. According to differences in how tourists construct authenticity, the study divided tourists into three types: primitive imagination, aesthetic reality and rational cognition. The results of this study provide a deeper understanding of various viewpoints about authenticity research and contribute to the academic discussion on how to understand the authenticity of unique cultural heritage sites such as traditional villages in the context of tourism development.

Solder bumps for chip interconnections are downsizing from current approximately 100 µm to the expected 1 µm in future. As a result, the Cu-Ni cross-interaction in Cu/Solder/Ni solder joints will be more complicated and then strongly influence the growth of the intermetallic compounds (IMCs). Thus, it is critical to understand the fundamental aspects of interfacial reaction in micro solder joints. This paper aims to reveal the effect mechanism of reflow temperature and solder size on the interfacial reaction in Cu/Solder/Ni solder joints.

The Cu-Ni cross-interaction in the Cu/Sn/Ni micro solder joints with 50 and 100 µm solder sizes at 250°C and 300°C were observed, respectively. The line-type interconnects were soaked in silicone oil, and the temperature of the line-type interconnects was 250 ± 3°C and 300 ± 3°C, which were monitored by a fine K-type thermocouple, and followed by an isothermal aging process at various times. After aging, the specimens were removed from the silicone oil and cooled in the air to room temperature.

The major interfacial reaction product on both interfaces was (Cu,Ni)₆Sn₅, and the asymmetric growth of (Cu,Ni)₆Sn₅, evidenced by the thickness of (Cu,Ni)₆Sn₅ IMCs at the Sn/Ni interface was always larger than that at the Sn/Cu interface, resulted from the directional migration of Cu atoms toward the Sn/Ni interface under Cu concentration gradient. The morphology of (Cu,Ni)₆Sn₅ IMC at Sn/Cu interface was columnlike at 250°C, and which changed from columnlike to scallop with large aspect ratio at 300°C, while that at Sn/Ni interface gradually evolved from needlelike to the mixture of needlelike and layered at 250°C, and which evolved from needlelike to scallop with large aspect ratio at 300°C. The evolution of morphology of (Cu,Ni)₆Sn₅ is attributed to the content of Ni. Furthermore, the results indicate that the Cu-Ni cross-interaction was stronger with small solder size and relatively low temperature in the Cu/Sn/Ni micro solder joints.

The asymmetric growth of (Cu,Ni)₆Sn₅ in the Cu/Sn/Ni micro solder joints, evidenced by the thickness of (Cu,Ni)₆Sn₅ IMCs at the Sn/Ni interface, was always larger than that at the Sn/Cu interface. The morphology evolution of (Cu,Ni)₆Sn₅ IMC at both interfaces was attributed to the content of Ni. The Cu-Ni cross-interaction was stronger with small solder size and relatively low temperature in the Cu/Sn/Ni micro solder joints.

Quality failures in grid infrastructure construction would cause large-scale collapses in power supply and additional expenditures by reworks and repairs. Learning from quality failures (LFQF) extracts experience from previous quality events and converts them into preventive measures to reduce or eliminate future construction quality issues. This study aims to investigate the influence factors of LFQF in the construction of grid infrastructure.

The related factors of LFQF, including quality management (QM) practices, quality rectification, and individual learning, were identified by reviewing literature about organizational learning and extracting experience from previous failures. A questionnaire survey was distributed to the grid companies in North, Northeast, Northwest, East, Central, and Southwest China. 381 valid responses collected and analyzed using structural equation modeling (SEM) to test the influence of these factors on LFQF.

The SEM results support that QM practices positively affect individual learning and LFQF. Quality rectification indirectly impacts LFQF via individual learning, while the results did not support the direct link between quality rectification and LFQF.

The findings strengthen practical insights into extracting experience from poor-quality issues and continuous improvement. The contributory factors of LFQF found in this study benefit the practitioners by taking effective measures to enhance organizational learning capability and improve the long-term construction quality performance in the grid infrastructure industry.

Existing research about the application of LFQF still stays at the explorative and conceptual stage. This study investigates the related factors of LFQF, including QM practices, quality rectification, and individual learning, extending the model development of learning from failures (LFF) in construction QM.

The purpose of this study to improve the efficiency of customer acquisition and retention through the design of salary information disclosure mechanism.

This study develops a stylized game-theoretic model of delegating customer acquisition and retention, focusing on how firms choose delegation and wage information disclosure strategy.

The results confirm the necessity for enterprises to disclose salary information. When sales agents are risk neutral, firms should choose multi-agent (MA) delegation and disclose their wages. However, when agents are risk averse, firms may disclose the wages of acquisition agents or both agents in MA delegation, depending on the uncertainty of the retention market.

This paper contributes to the literature on delegation of customer acquisition and retention and demonstrates that salary disclosure can be used as a supplement to the incentive mechanism.

The occupational health risk associated with the production of prefabricated concrete components is often overlooked. This paper will use a damage assessment and cyclic mitigation (DACM) model to provide individualized exposure risk assessment and corresponding mitigation management measures for workers who are being exposed.

The DACM model is proposed based on the concept of life cycle assessment (LCA). The model uses Monte-Carlo simulation for uncertainty risk assessment, followed by quantitative damage assessment using disability-adjusted life year (DALY). Lastly, sensitivity analysis is used to identify the parameters with the greatest impact on health risks.

The results show that the dust concentration is centered around the mean, and the fitting results are close to normal distribution, so the mean value can be used to carry out the calculation of risk. However, calculations using the DACM model revealed that there are still some work areas at risk. DALY damage is most severe in concrete production area. Meanwhile, the inhalation rate (IR), exposure duration (ED), exposure frequency (EF) and average exposure time (AT) showed greater impacts based on the sensitivity analysis.

Based on the comparison, the DACM model can determine that the potential occupational health risk of prefabricated concrete component (PC) factory and the risk is less than that of on-site construction. It synthesizes field research and simulation to form the entire assessment process into a case-base system with the depth of the cycle, which allows the model to be continuously adjusted to reduce the occupational health damage caused by production pollution exposure.

The study analyzed the moderating role of information and communication technology (ICT) in the financial inclusion–poverty nexus in Nigeria.

The study adopts a battery of econometric techniques such as the generalized method of moments and the fully modified OLS to control for heterogeneity and endogeneity issues in the poverty literature.

The results show that ICT (regardless of the measure of ICT adopted) moderates the impact of financial inclusion on poverty in Nigeria. Specifically, the result shows that ICT strengthens the effectiveness of financial inclusion to reduce poverty. In particular, the results show that in the presence of unanticipated macroeconomic shock, ICT can help to deepen financial inclusion, reduce the negative effects of an unanticipated shock and ameliorate poverty in Nigeria. That is, the vulnerability of the poor in Nigeria to unanticipated economic shocks can be reduced by expanding the use of ICT in the financial sector. The research and policy implications are discussed.

The study accounts for the impact of COVID-19.

Integrating transaction costs economics and task-technology fit theory, this study distinguishes two categories of social media–enabled interactions, namely task-related interactions and tie-related interactions, and explores the match between these two and firms' use of contracts in achieving safeguarding and coordinating purposes in interfirm governance.

Two studies were conducted to test the hypotheses. In Study 1, this study collaborated with a professional market research firm and collected responses from Chinese manufacturing firms in a survey. In Study 2, this study designed a scenario-based experiment and collected 239 participants from the Credamo platform.

This study categorized social media–enabled interactions into task-related interactions and tie-related interactions and conducted two studies to reveal that the safeguarding purpose of contract specificity is amplified by tie-related interactions, whereas the coordinating purpose of contract specificity is strengthened by task-related interactions.

This study assumes that firms permit and encourage the use of social media. However, some firms might prohibit the use of social media due to risk issues, or their partners may be prohibited from using social media.

Given that social media–enabled interactions have joint effects with contracts in achieving safeguarding and coordinating purposes, a firm's employees should match their goals with an appropriate type of social media–enabled interactions.

This study enriches the interfirm governance literature by uncovering the roles of these two types of interactions in matching contract specificity to achieve safeguarding and coordinating purposes, which provides actionable insights for managers in governing interfirm relationships.