Search results

1 – 10 of 21
Open Access
Article
Publication date: 10 October 2018

Chander Prakash, Sunpreet Singh, Ilenia Farina, Fernando Fraternali and Luciano Feo

Porous implant surface is shown to facilitate bone in-growth and cell attachment, improving overall osteointegration, while providing adequate mechanical integrity. Recently…

1109

Abstract

Purpose

Porous implant surface is shown to facilitate bone in-growth and cell attachment, improving overall osteointegration, while providing adequate mechanical integrity. Recently, biodegradable material possessing such superior properties has been the focus with an aim of revolutionizing implant’s design, material and performance. This paper aims to present a comprehensive investigation into the design and development of low elastic modulus porous biodegradable Mg-3Si-5HA composite by mechanical alloying and spark plasma sintering (MA-SPS) technique.

Design/methodology/approach

This paper presents a comprehensive investigation into the design and development of low elastic modulus porous biodegradable Mg-3Si-5HA composite by MA-SPS technique. As the key alloying elements, HA powders with an appropriate proportion weight 5 and 10 are mixed with the base elemental magnesium (Mg) particles to form the composites of potentially variable porosity and mechanical property. The aim is to investigate the performance of the synthesized composites of Mg-3Si together with HA in terms of mechanical integrity hardness and Young’s moduli corrosion resistance and in-vitro bioactivity.

Findings

Mechanical and surface characterization results indicate that alloying of Si leads to the formation of fine Mg2 Si eutectic dense structure, hence increasing hardness while reducing the ductility of the composite. On the other hand, the allying of HA in Mg-3Si matrix leads to the formation of structural porosity (5-13 per cent), thus resulting in low Young’s moduli. It is hypothesized that biocompatible phases formed within the composite enhanced the corrosion performance and bio-mechanical integrity of the composite. The degradation rate of Mg-3Si composite was reduced from 2.05 mm/year to 1.19 mm/year by the alloying of HA elements. Moreover, the fabricated composites showed an excellent bioactivity and offered a channel/interface to MG-63 cells for attachment, proliferation and differentiation.

Originality/value

Overall, the findings suggest that the Mg-3Si-HA composite fabricated by MA and plasma sintering may be considered as a potential biodegradable material for orthopedic application.

Details

PSU Research Review, vol. 2 no. 2
Type: Research Article
ISSN: 2399-1747

Keywords

Article
Publication date: 15 September 2023

Deepak Kumar Prajapati, Jitendra Kumar Katiyar and Chander Prakash

This study aims to use a machine learning (ML) model for the prediction of traction coefficient and asperity load ratio for different surface topographies of non-conformal rough…

Abstract

Purpose

This study aims to use a machine learning (ML) model for the prediction of traction coefficient and asperity load ratio for different surface topographies of non-conformal rough contacts.

Design/methodology/approach

The input data set for the ML model is generated using a mixed-lubrication model. Surface topography parameters (skewness, kurtosis and pattern ratio), rolling speed and hardness are used as input features in the multi-layer perceptron (MLP) model. The hyperparameter tuning and fivefold cross-validation are also performed to minimize the overfitting.

Findings

From the results, it is shown that the MLP model shows excellent accuracy (R2 > 90%) on the test data set for making the prediction of mixed lubrication parameters. It is also observed that engineered rough surfaces with high negative skewness, low kurtosis and isotropic surface patterns exhibit a significant low traction coefficient. It is also concluded that the MLP model gives better accuracy in comparison to the random forest regression model based on the training and testing data sets.

Originality/value

Mixed lubrication parameters are predicted by developing a regression-based MLP model. The machine learning model is trained using several topography parameters, which are vital in the mixed-EHL regime because of the lack of regression-fit expressions in previous works. The accuracy of MLP with random forest models is also compared.

Details

Industrial Lubrication and Tribology, vol. 75 no. 9
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 3 January 2023

Animesh Basak, A. Lee, Alokesh Pramanik, Ken Neubauer, Chander Prakash and S. Shankar

Regardless of the materials used, additive manufacturing (AM) is one of the most popular emerging fabrication processes used for creating complex and intricate structural…

Abstract

Purpose

Regardless of the materials used, additive manufacturing (AM) is one of the most popular emerging fabrication processes used for creating complex and intricate structural components. This study aims to investigate the effects of process parameters – namely, nozzle diameter, layer thickness and infill density on microstructure as well as the mechanical properties of 17–4 PH stainless steel specimens fabricated via material extrusion AM.

Design/methodology/approach

The experimental approach investigates the effects of printing parameters, including nozzle diameter, layer thickness and infill density, on surface roughness, physical and mechanical properties of the printed specimens. The tests were triplicated to ensure reproducibility of the experimental results.

Findings

The highest ultimate tensile strength, 795.26 MPa, was obtained on specimen that was fabricated with a 0.4 mm nozzle diameter, 0.14 mm layer thickness and 30% infill density. Furthermore, a 0.4 mm nozzle diameter also provided slightly better ductility. This came at the expense of surface finishing, as a 0.25 mm nozzle diameter exhibited better surface finishing over a 0.4 mm nozzle diameter. Infill density was shown to slightly influence the tensile properties, whereas layer thickness showed a significant effect on surface roughness. By contrast, hardness and ductility were independent of nozzle diameter, layer thickness and infill density.

Originality/value

This paper presents a comprehensive analysis relating to various input printing parameters on microstructural, physical and mechanical properties of additively manufactured 17–4 PH stainless steel to improve the printability and processability via AM.

Details

Rapid Prototyping Journal, vol. 29 no. 5
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 18 October 2018

Sunpreet Singh, Narinder Singh, Munish Gupta, Chander Prakash and Rupinder Singh

The purpose of this paper is to fabricate acrylonitrile-butadiene-styrene (ABS)/high impact polystyrene (HIPS) based multi-material geometries using a low cost polymer printer. At…

477

Abstract

Purpose

The purpose of this paper is to fabricate acrylonitrile-butadiene-styrene (ABS)/high impact polystyrene (HIPS) based multi-material geometries using a low cost polymer printer. At the same time, efforts have been made to investigate the mechanical characteristics of the obtained prints and to perform the optimization using the Taguchi-Grey (TGRA) method.

Design/methodology/approach

Initially, the feedstock materials were in-house fabricated in the form of filament wires, workable with fused filament fabrication (FFF) technique, of 1.75 ± 0.1 mm diameter by using a single screw extruder. Multi-material structures were fabricated using variable parameters (such as: raster angles, layer height, fill density and solid layers) and the experimentation was conducted as per Taguchi L18 array. Mechanical responses obtained by performing tensile, impact and bending test were studied in response to input variables and ultimately optimized settings were obtained, for individual as well as multiple parameters). Scanning electron microscopy (SEM) analysis was performed to analyze the fractured surfaces.

Findings

The Signal/Noise (S/N) plots for the quality characteristics highlighted that selected input parameters significantly influenced the obtained values for tensile strength, impact strength and flexural strength. Micrographs of the fractured specimens showed the occurrence of brittle fracture with higher levels of perimeter, infill density and solid layers. The extent of delamination was also increased under the bending load and further increased by increasing solid layers.

Practical implications

The results of the study strongly advocated the utility of fabricated multi-materials structures in automotive, aerospace and other manufacturing industries.

Originality/value

This work represents the fabrication, testing and analysis of polymer-based multi-material structures for engineering applications.

Details

Rapid Prototyping Journal, vol. 25 no. 1
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 3 October 2022

Sucheta Agarwal, Kuldeep Kumar Saxena, Vivek Agrawal, Jitendra Kumar Dixit, Chander Prakash, Dharam Buddhi and Kahtan A. Mohammed

Manufacturing companies are increasingly using green smart production (GSM) as a tactic to boost productivity since it has a number of advantages over conventional manufacturing…

Abstract

Purpose

Manufacturing companies are increasingly using green smart production (GSM) as a tactic to boost productivity since it has a number of advantages over conventional manufacturing methods. It costs a lot of money and takes a lot of work to create an SMS since it combines a lot of different technologies, including automation, data exchanges, cyber-physical systems (CPS), artificial intelligence, the Internet of things (IoT) and semi-autonomous industrial systems. Green smart manufacturing (GSM) activities provide the foundation for creating ecologically friendly and green products. However, there are a number of other significant barriers obstacles to GSM deployment. As a result, removing this identification of these hurdles in a systematic manner should be a top focus of this study.

Design/methodology/approach

This article seeks to identify and prioritize the nine barriers based on research and expert viewpoints on GSM challenges. The analytical hierarchy process (AHP) is used to prioritize the barriers.

Findings

The result depicts that, financial constraints is the most important barrier that followed by scarcity of dedicated suppliers, concern to data security lack of understanding of the surroundings, inadequate top management commitment, proper handling of data interfaces lack of support by government, employees' lack of training, concern to data security lack of environment knowledge, fear of change/resistance and constraints of technology.

Research limitations/implications

The current research will help the manufacturing industry in Industry 4.0 to identify potential barriers to GSM implementation.

Originality/value

Green manufacturing (GM) entails the implementation of renewable production methods and eco-friendly procedures in manufacturing businesses. This study helps manufacturers come up with recycling and creative products, and manufacturers can give back to the environment by protecting natural areas by getting rid of the obstacles that get in the way.

Details

The TQM Journal, vol. 36 no. 1
Type: Research Article
ISSN: 1754-2731

Keywords

Article
Publication date: 15 November 2018

Nataraj Poomathi, Sunpreet Singh, Chander Prakash, Rajkumar V. Patil, P.T. Perumal, Veluchamy Amutha Barathi, Kalpattu K. Balasubramanian, Seeram Ramakrishna and N.U. Maheshwari

Bioprinting is a promising technology, which has gained a recent attention, for application in all aspects of human life and has specific advantages in different areas of…

Abstract

Purpose

Bioprinting is a promising technology, which has gained a recent attention, for application in all aspects of human life and has specific advantages in different areas of medicines, especially in ophthalmology. The three-dimensional (3D) printing tools have been widely used in different applications, from surgical planning procedures to 3D models for certain highly delicate organs (such as: eye and heart). The purpose of this paper is to review the dedicated research efforts that so far have been made to highlight applications of 3D printing in the field of ophthalmology.

Design/methodology/approach

In this paper, the state-of-the-art review has been summarized for bioprinters, biomaterials and methodologies adopted to cure eye diseases. This paper starts with fundamental discussions and gradually leads toward the summary and future trends by covering almost all the research insights. For better understanding of the readers, various tables and figures have also been incorporated.

Findings

The usages of bioprinted surgical models have shown to be helpful in shortening the time of operation and decreasing the risk of donor, and hence, it could boost certain surgical effects. This demonstrates the wide use of bioprinting to design more precise biological research models for research in broader range of applications such as in generating blood vessels and cardiac tissue. Although bioprinting has not created a significant impact in ophthalmology, in recent times, these technologies could be helpful in treating several ocular disorders in the near future.

Originality/value

This review work emphasizes the understanding of 3D printing technologies, in the light of which these can be applied in ophthalmology to achieve successful treatment of eye diseases.

Details

Rapid Prototyping Journal, vol. 25 no. 3
Type: Research Article
ISSN: 1355-2546

Keywords

Article
Publication date: 24 June 2020

Nataraj Poomathi, Sunpreet Singh, Chander Prakash, Arjun Subramanian, Rahul Sahay, Amutha Cinappan and Seeram Ramakrishna

In the past decade, three-dimensional (3D) printing has gained attention in areas such as medicine, engineering, manufacturing art and most recently in education. In biomedical…

1389

Abstract

Purpose

In the past decade, three-dimensional (3D) printing has gained attention in areas such as medicine, engineering, manufacturing art and most recently in education. In biomedical, the development of a wide range of biomaterials has catalysed the considerable role of 3D printing (3DP), where it functions as synthetic frameworks in the form of scaffolds, constructs or matrices. The purpose of this paper is to present the state-of-the-art literature coverage of 3DP applications in tissue engineering (such as customized scaffoldings and organs, and regenerative medicine).

Design/methodology/approach

This review focusses on various 3DP techniques and biomaterials for tissue engineering (TE) applications. The literature reviewed in the manuscript has been collected from various journal search engines including Google Scholar, Research Gate, Academia, PubMed, Scopus, EMBASE, Cochrane Library and Web of Science. The keywords that have been selected for the searches were 3 D printing, tissue engineering, scaffoldings, organs, regenerative medicine, biomaterials, standards, applications and future directions. Further, the sub-classifications of the keyword, wherever possible, have been used as sectioned/sub-sectioned in the manuscript.

Findings

3DP techniques have many applications in biomedical and TE (B-TE), as covered in the literature. Customized structures for B-TE applications are easy and cost-effective to manufacture through 3DP, whereas on many occasions, conventional technologies generally become incompatible. For this, this new class of manufacturing must be explored to further capabilities for many potential applications.

Originality/value

This review paper presents a comprehensive study of the various types of 3DP technologies in the light of their possible B-TE application as well as provides a future roadmap.

Details

Rapid Prototyping Journal, vol. 26 no. 7
Type: Research Article
ISSN: 1355-2546

Keywords

Book part
Publication date: 10 April 2019

Richa Saxena and Vibhav Singh

The purpose of the chapter is to integrate the understanding of diversity from different perspectives in Indian context and see how the holistic view emerges.

Abstract

Purpose

The purpose of the chapter is to integrate the understanding of diversity from different perspectives in Indian context and see how the holistic view emerges.

Methodology

The methodology used is primarily the literature review of the concepts and their evolution in Indian context and the use of secondary sources to extract praxis information.

Findings

It emerged from the exploration on diversity practices at the societal as well as organizational level in India that the country demonstrates intent to mainstream the people from different wakes, but with the changing context the format of the practices has changed.

Research Limitations

The basic premise of the chapter needs to be explored further through primary data from practice.

Originality

This chapter is novel in a way that it integrates the diversity scholarship of four different streams viz. caste, gender, disability, and generation. Most of the existing research focuses only on a thin slice/one key dimension of diversity.

Details

Diversity within Diversity Management
Type: Book
ISBN: 978-1-78754-821-3

Keywords

Article
Publication date: 29 March 2019

Gitesh Kumar, Hem Chander Garg and Ajay Gijawara

This paper aims to report the friction and wear characteristics of refined soybean oil (RSBO) blended with copper oxide (CuO) nanoparticles and zinc dialkyldithiophosphate (ZDDP…

Abstract

Purpose

This paper aims to report the friction and wear characteristics of refined soybean oil (RSBO) blended with copper oxide (CuO) nanoparticles and zinc dialkyldithiophosphate (ZDDP) as additives.

Design/methodology/approach

Four different concentrations 0.04, 0.05, 0.1 and 0.2 Wt.% of CuO nanoparticles were added with ZDDP in RSBO. The friction and wear characteristics of lubricants have been investigated on a pin-on-disc tribotester under loads of 120 and 180 N, with rotating speeds of 1,200 and 1,500 rpm in half hour of operating time. The dispersion stability of CuO nanoparticles has been analyzed using ultraviolet visible (UV-Vis) spectroscopy. The wearout surface of pins has been examined by using a scanning electron microscope.

Findings

The results revealed that there is a reduction in the friction and wear by the addition of CuO nanoparticles and ZDDP in RSBO. Coefficient of friction increases at a high sliding speed for RSBO with ZDDP. From UV-Vis spectroscopy, it is observed that 100 ml of oleic acid surfactant per gram of CuO nanoparticles has stable dispersion in RSBO.

Originality/value

The addition of ZDDP and CuO nanoparticles in RSBO is more efficient to reduce the friction and wear in comparison to base oil. The optimum concentration of CuO nanoparticles in RSBO is 0.05 Wt.%.

Details

Industrial Lubrication and Tribology, vol. 71 no. 3
Type: Research Article
ISSN: 0036-8792

Keywords

Article
Publication date: 16 August 2013

Chander Velu and Mahima Khanna

The study aims to provide insights into the changing nature and dynamics of business model innovation in India over the last decade.

7183

Abstract

Purpose

The study aims to provide insights into the changing nature and dynamics of business model innovation in India over the last decade.

Design/methodology/approach

This study uses a unique hand‐collected data set of 95 observations that mentioned business model innovation in India in the financial press between 2001 and 2008. The study analyses business model innovation trends across industries, firm types and newness of innovation.

Findings

First, with time the percentage share of business model innovations by new entrants has been increasing. Second, new entrants increasingly attempt efficiency improvements while targeting novel ways of meeting customer needs, whilst incumbents predominantly adopt efficiency‐based business models. Third, over the period of the authors' study, there was a clear shift in business model innovation away from IT‐related industries towards consumer goods, media and financial services. Fourth, new entrants introduced new‐to‐industry, whereas incumbents introduced new‐to‐firm innovations. Fifth, novelty‐centred business models of new entrants and incumbents were predominantly new‐to‐firm; but efficiency‐centred business models of new entrants and incumbents were new‐to‐firm and new‐to‐industry, respectively. Sixth, over time, novelty‐centred business model designs adopted by firms changed from being new‐to‐industry to new‐to‐firm type, whilst efficiency‐centred business model designs remained relatively unchanged.

Originality/value

Business model innovation is increasingly becoming a priority for firms globally in order to create competitive advantage, but little is known about the nature and dynamics of such type of innovation in India. The study analyses how business model innovation in India has evolved between 2001 and 2008. The study draws policy implications to stimulate and sustain business model innovation in India.

Details

Journal of Indian Business Research, vol. 5 no. 3
Type: Research Article
ISSN: 1755-4195

Keywords

1 – 10 of 21