Search results
1 – 10 of over 1000Rokbi Mansour, Ati Abdelaziz and Aiche Fatima Zohra
The literature reveals there is a limited knowledge regarding the extraction of long natural fibers, in particular those extracted from leaves. This investigation aims to present…
Abstract
Purpose
The literature reveals there is a limited knowledge regarding the extraction of long natural fibers, in particular those extracted from leaves. This investigation aims to present the extraction process and the characterization of long natural cellulose fibers from doum palm leaves (Hyphaene thebaica L.), with properties suitable for polymeric composite materials and textile applications.
Design/methodology/approach
The resulting H. thebaica L. fibers were identified using Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The physical properties of the extracted fibers were measured to estimate the reliability of extraction conditions. Mechanical properties were evaluated to determine ultimate strength, Young’s modulus and strain-at-failure of the fibers of the doum leaves.
Findings
The following properties of the doum palm are listed in this paper: physical properties of doum palm fibers (H. thebaica L.), TGA, XRD of doum palm fibers, tensile properties of doum palm fibers and surface morphology of doum palm fibers.
Research limitations/implications
Like synthetic fibers, the inclusion of short or long natural fibers into the polymer matrix can increase tensile, flexural and compressive strengths of these matrixes. Compared to the short-length natural fibers, longer-length fibers provide better reinforcements and therefore accord higher performances to the composites. Long fibers can also provide exceptional opportunities to develop a new class of advanced lightweight composites and have the potential to rival glass fiber in the manufacture of composite materials, using matrix materials, such as polypropylene, epoxy and phenolic resins.
Originality/value
The following values are presented in this paper: density of doum palm fibers = 1.14-1.40 g/cm², linear density (Tex) = 33.10 ±11.5, equivalent diameter (µm) = 178.72 ± 41.7, diameter (µm) = 137.02-220.42, tensile strength (MPa) = 124.84-448.10, Young’s modulus (GPa) = 8.06-19.59, strain-at-failure (%) = 0.81-2.86.
Details
Keywords
Desalegn Atalie and Rotich K. Gideon
This study aims at extracting and characterizing palm leaf fibers from Elaeis guineensis species of palm trees found in Ethiopia.
Abstract
Purpose
This study aims at extracting and characterizing palm leaf fibers from Elaeis guineensis species of palm trees found in Ethiopia.
Design/methodology/approach
The fibers were extracted using three methods: manually, through water retting and chemically with sodium hydroxide. Physical parameters of the extracted fibers were evaluated, including tensile strength, fiber fineness, moisture content, degradation point and functional groups. Its cellulose, hemicellulose and lignin contents were also analyzed.
Findings
The results showed that the palm leaf fibers have a comparable fiber strength (170-450 MPa), elongation (0.95-1.25 per cent), fiber length (230-500 mm) and moisture regain (8-10 per cent) to jute, sisal and flax and thus can be used for technical textile application.
Originality/value
The fibers extracted using the water retting method had better properties than the other extraction methods. Its fiber length of 307 mm, cellulose content of 58 per cent, strength of 439 MPa and elongation of 1.24 per cent were the highest for all the extracted fibers. When compared with other fibers, palm leaf fiber properties such as tensile strength (439 MPa), elongation (1.24 per cent), moisture content (7.9-10.4 per cent and degradation point (360-380°C) were consistent with those of jute, sisal and ramie fibers. Hence, palm leaf fibers can be used for technical textile applications such as composite reinforcement.
Details
Keywords
Upendra S. Gupta, Sudhir Tiwari and Uttam Sharma
The incompatibility of natural fibers with polymer matrices is one of the key obstacles restricting their use in polymer composites. The interfacial connection between the fibers…
Abstract
Purpose
The incompatibility of natural fibers with polymer matrices is one of the key obstacles restricting their use in polymer composites. The interfacial connection between the fibers and the matrix was weak resulting in a lack of mechanical properties in the composites. Chemical treatments are often used to change the surface features of plant fibers, yet these treatments have significant drawbacks such as using substantial amounts of liquid and chemicals. Plasma modification has recently become very popular as a viable option as it is easy, dry, ecologically friendly, time-saving and reduces energy consumption. This paper aims to explore plasma treatment for improving the surface adhesion characteristics of sisal fibers (SFs) without compromising the mechanical attributes of the fiber.
Design/methodology/approach
A cold glow discharge plasma (CGDP) modification using N2 gas at varied power densities of 80 W and 120 W for 0.5 h was conducted to improve the surface morphology and interfacial compatibility of SF. The mechanical characteristics of unmodified and CGDP-modified SF-reinforced epoxy composite (SFREC) were examined as per the American Society for Testing and Materials standards.
Findings
The cold glow discharge nitrogen plasma treatment of SF at 120 W (30 min) enhanced the SFREC by nearly 122.75% superior interlaminar shear strength, 71.09% greater flexural strength, 84.22% higher tensile strength and 109.74% higher elongation. The combination of improved surface roughness and more effective lignocellulosic exposure has been responsible for the increase in the mechanical characteristics of treated composites. The development of hydrophobicity in the SF had been induced by CGDP N2 modification and enhanced the size of crystals and crystalline structure by removing some unwanted constituents of the SF and etching the smooth lignin-rich surface layer of the SF particularly revealed via FTIR and XRD.
Research limitations/implications
Chemical and physical treatments have been identified as the most efficient ways of treating the fiber surface. However, the huge amounts of liquids and chemicals needed in chemical methods and their exorbitant performance in terms of energy expenditure have limited their applicability in the past decades. The use of appropriate cohesion in addition to stimulating the biopolymer texture without changing its bulk polymer properties leads to the formation and establishment of plasma surface treatments that offer a unified, repeatable, cost-effective and environmentally benign replacement.
Originality/value
The authors are sure that this technology will be adopted by the polymer industry, aerospace, automotive and related sectors in the future.
Details
Keywords
Tina Martina, Wiah Wardiningsih, Ajeng Rianti, Ryan Rudy and Samuel Martin Pradana
The purpose of this study was to characterize the fiber from Curcuma longa (turmeric) stems. The fiber’s properties were used to assess its potential for textile yarn production.
Abstract
Purpose
The purpose of this study was to characterize the fiber from Curcuma longa (turmeric) stems. The fiber’s properties were used to assess its potential for textile yarn production.
Design/methodology/approach
The natural fiber used in this investigation was extracted from agricultural waste through a cold water-retting process.
Findings
The Curcuma longa fiber had a crystallinity of 50%. Cellulose, hemicellulose and lignin were detected in the fibers’ Fourier transform infrared spectra. A Curcuma longa fiber bundle contains several constituent fibers. The fibers exhibited an irregular cross-section, with a variable oval shape for the lumen. The fibers of Curcuma longa averaged 30.22 cm in length. The fineness of the fibers was 6.58 Tex. In this study, Curcuma longa fibers had an 11.30% moisture regain. The tensile strength of the fibers was 19.18 g/Tex. Curcuma longa fibers showed a break elongation of 9.79%. The fiber coefficient of friction was 0.3.
Originality/value
Curcuma longa has characteristics that make it appropriate for industrial uses like spinning. Thus, it is possible to use Curcuma longa fiber as a raw material for textiles.
Details
Keywords
Viju Subramoniapillai and Govindharajan Thilagavathi
In recent years, oil spill pollution has become one of the main problems of environmental pollution. Recovering oil by means of sorbent materials is a very promising approach and…
Abstract
Purpose
In recent years, oil spill pollution has become one of the main problems of environmental pollution. Recovering oil by means of sorbent materials is a very promising approach and has acquired more attention due to its high cleanup efficiency. Compared to synthetic fibrous sorbents, the use of natural fibers in oil spill cleanups offers several advantages including environmental friendliness, degradable features and cost-effectiveness. Therefore, studies on developing sorbents using natural fibers for oil spill cleanup applications have become a research hotspot.
Design/methodology/approach
This paper reviews the work conducted by several researchers in developing oil sorbents from fibers such as cattail, nettle, cotton, milkweed, kapok, populous seed fiber and Metaplexis japonica fiber. Some featured critical parameters influencing the oil sorption capacity of fibrous substrates are discussed. Oil sorption capacity and reusability performance of various fibers are also discussed. Recent developments in oil spill cleanups and test methods for oil sorbents are briefly covered.
Findings
The main parameters influencing the oil sorption capacity of sorbents are fiber morphological structure, fiber density (g/cc), wax (%), hollowness (%) and water contact angle. An extensive literature review showed that oil sorption capacity is highest for Metaplexis japonica fiber followed by populous seed fiber, kapok, milkweed, cotton, nettle and cattail fiber. After use, the sorbents can be buried under soil or they can also be burned so that they can be vanished from the surface without causing environmental-related issues.
Originality/value
This review paper aims to summarize research studies conducted related to various natural fibers for oil spill cleanups, fiber structural characteristics influencing oil sorption and recent developments in oil spill cleanups. This work will inspire future researchers with various knowledge backgrounds, particularly, from a sustainability perspective.
Details
Keywords
Atin Sumihartati, Wiah Wardiningsih, Naelly Al Kautsar, Muhammad Permana, Samuel Pradana and Ryan Rudy
The purpose of this study is to explore the potential of Cordyline Australis fibers as an alternate raw material for textile.
Abstract
Purpose
The purpose of this study is to explore the potential of Cordyline Australis fibers as an alternate raw material for textile.
Design/methodology/approach
The water retting method was used to extract the fiber. Cordyline Australis fibers were characterized in terms of the morphology of fibers (fiber cross-sectional and longitudinal), fiber chemical functional groups, tensile strength and elongation, fineness, fiber length, moisture regain and friction coefficient.
Findings
Cordyline Australis fiber strands consist of several individual fibers. At the longitudinal section, the fiber cells appeared as long cylindrical tubes with a rough surface. The cross-section of the Cordyline Australis fibers was irregular but some were oval. The key components in the fibers were cellulose, hemicellulose and lignin. The tensile strength of the fiber per bundle was 2.5 gf/den. The elongation of fibers was 13.15%. The fineness of fiber was 8.35 Tex. The average length of the fibers was 54.72 cm. Moisture Regain for fiber was 8.59%. The friction coefficient of fibers was 0.16. The properties of the fiber showed that the Cordyline Australis fiber has the potential to be produced into yarn.
Originality/value
To the best of the author's knowledge, there is no scientific article focused on the Cordyline Australis fibers. Natural fibers from the leaves of the Cordyline Australis plant could be used as an alternate material for textile.
Details
Keywords
Wiah Wardiningsih, Sandra Efendi, Rr. Wiwiek Mulyani, Totong Totong, Ryan Rudy and Samuel Pradana
This study aims to characterize the properties of natural cellulose fiber from the pseudo-stems of the curcuma zedoaria plant.
Abstract
Purpose
This study aims to characterize the properties of natural cellulose fiber from the pseudo-stems of the curcuma zedoaria plant.
Design/methodology/approach
The fiber was extracted using the biological retting process (cold-water retting). The intrinsic fiber properties obtained were used to evaluate the possibility of using fiber for textile applications.
Findings
The average length of a curcuma zedoaria fiber was 34.77 cm with a fineness value of 6.72 Tex. A bundle of curcuma zedoaria fibers was comprised of many elementary fibers. Curcuma zedoaria had an irregular cross-section, with the lumen having a varied oval shape. Curcuma zedoaria fibers had tenacity and elongation value of 3.32 gf/denier and 6.95%, respectively. Curcuma zedoaria fibers had a coefficient of friction value of 0.46. Curcuma zedoaria fibers belong to a hygroscopic fiber type with a moisture regain value of 10.29%.
Originality/value
Extraction and Characterization of Curcuma zedoaria Pseudo-stems Fibers for Textile Application.
Details
Keywords
Marjo Määttänen, Sari Asikainen, Taina Kamppuri, Elina Ilen, Kirsi Niinimäki, Marjaana Tanttu and Ali Harlin
While aiming to create methods for fibre recycling, the question of colours in waste textiles is also in focus; whether the colour should be kept or should be removed while…
Abstract
Purpose
While aiming to create methods for fibre recycling, the question of colours in waste textiles is also in focus; whether the colour should be kept or should be removed while recycling textile fibre. More knowledge is needed for colour management in a circular economy approach.
Design/methodology/approach
The research included the use of different dye types in a cotton dyeing process, the process for decolourizing and the results. Two reactive dyes, two direct dyes and one vat dye were used in the study. Four chemical treatment sequences were used to evaluate colour removal from the dyed cotton fabrics, namely, HCE-A, HCE-P-A, HCE-Z-P-A and HCE-Y-A.
Findings
The objective was to evaluate how different chemical refining sequences remove colour from direct, reactive and vat dyed cotton fabrics, and how they influence the specific cellulose properties. Dyeing methods and the used refining sequences influence the degree of colour removal. The highest achieved final brightness of refined cotton materials were between 71 and 91 per cent ISO brightness, depending on the dyeing method used.
Research limitations/implications
Only cotton fibre and three different colour types were tested.
Practical implications
With cotton waste, it appears to be easier to remove the colour than to retain it, especially if the textile contains polyester residues, which are desired to be removed in the textile refining stage.
Originality/value
Colour management in the CE context is an important new track to study in the context of the increasing amount of textile waste used as a raw material.
Details
Keywords
Ann Wairimu Mburu, Josphat Igadwa Mwasiagi and Joseph Kinyanjui Muiruri
Bacterial exopolysaccharides (eps) have fascinating chemical compositions, properties and structures which could be used in the modification of natural fibres. Bacterial eps have…
Abstract
Purpose
Bacterial exopolysaccharides (eps) have fascinating chemical compositions, properties and structures which could be used in the modification of natural fibres. Bacterial eps have therefore been used to modify plant cellulose fibre surface and impart desired properties. The purpose of this paper is therefore to investigate the influence of gin trash cultured bacteria eps on the physical and structural properties of cotton fibres.
Design/methodology/approach
Gin trash soil sample was collected from a ginnery in Kenya, and physiochemical and microbial characterization was done. The soil sample was then fermented for 24 h before being used to treat raw cotton fibres at varied conditions of temperature, pH and treatment time periods. Physical and structural properties of the treated fibres were then determined using USTER HVI-1000 M700, Fourier transform infrared, scanning electron microscope (SEM) and X-ray diffraction (XRD) and compared with those of the raw fibres.
Findings
The bacteria broth treated fibres were found to have increased in strength, spinning consistency index, elongation and fineness by 25.44, 24.30, 11.70 and 3.60%, respectively. The variations were attributed to interactions of bacterial eps with cotton cellulose through hydrogen bonding. SEM and XRD analysis revealed an increase in fibre surface roughness and crystallinity, respectively.
Originality/value
Bacterial eps have been used to modify plant cellulose fibre surface and impart desired properties. Eps producing bacteria have been isolated from different habitats such as saline water, soil samples, food wastes and petroleum-contaminated soil. To the best of the authors’ knowledge, bacterial eps cultured from gin trash soil sample for modification of cotton fibres have however not been previously done, hence the originality of the current study.
Details
Keywords
Wiah Wardiningsih, Farhan Aqil Syauqi Pradanta, Ryan Rudy, Resty Mayseptheny Hernawati and Doni Sugiyana
The purpose of this study is to analyse the characteristics of cellulose fibres derived from the pseudo-stems of Curcuma longa and to evaluate the properties of non-woven fabric…
Abstract
Purpose
The purpose of this study is to analyse the characteristics of cellulose fibres derived from the pseudo-stems of Curcuma longa and to evaluate the properties of non-woven fabric produced using these fibres.
Design/methodology/approach
The fibres were extracted via a decortication method. The acquired intrinsic qualities of the fibres were used to assess the feasibility of using them in textile applications. The thermal bonding approach was used for the development of the non-woven fabric, using a hot press machine with low-melt polyester fibre as a binder.
Findings
The mean length of Curcuma longa fibres was determined to be 52.73 cm, with a fineness value of 4.00 tex. The fibres exhibited an uneven cross-sectional morphology, characterized by a diverse range of oval-shaped lumens. The fibre exhibited a tenacity of 1.45 g/denier and an elongation value of 4.30%. The fibres possessed a moisture regain value of 11.30%. The experimental non-woven fabrics had consistent weight and thickness, while exhibiting different properties in terms of tensile strength and air permeability, with Fabric C having the highest tensile strength and the lowest air permeability value.
Originality/value
The features of Curcuma longa fibre, obtained with the decortication process, exhibited suitability for textile applications. Three experimental non-woven fabrics comprising different compositions of Curcuma longa fibre and low-melt polyester fibre were produced. The tensile strength and air permeability properties of these fabrics were influenced by the composition of the fibres.
Details