Search results

This study aims to illustrate the impacts of the motion of circular cylinders on the natural convection flow from variable heated partitions inside the X-shaped cavity filled with Al₂O₃-water nanofluid. A partial layer of a homogeneous/heterogeneous porous medium is located in the top area of the X-shaped cavity.

Three different cases of the porous media including homogeneous, horizontal heterogeneous and vertical heterogeneous porous media were considered. Three different thermal conditions of the embedded circular cylinders including hot, cold and adiabatic conditions are investigated. An incompressible scheme of smoothed particle hydrodynamics (ISPH) method is modified to compute the non-linear partial differential equations of the current problem. Two variable lengths of the left and right sides of the X-shaped cavity have a high-temperature T_h and a low-temperature T_c, respectively. The other wall parts are adiabatic. The numerical simulations are elucidating the dependence of the heat transfer and fluid flow characteristics on lengths of hot/cold source L_h, porous cases, Darcy parameter, thermal conditions of the embedded circular cylinders and solid volume fraction.

Overall, an increment in length of hot/cold source leads to augmentation on the temperature distributions and flow intensity inside the X-shaped cavity. The hot thermal condition of the circular cylinder augments the temperature distributions. The homogeneous porous medium slows down the flow speed in the top porous layer of the X-shaped cavity. The average Nusselt number decreases as L_h increases.

ISPH method simulated the motion of circular cylinders in the X-shaped cavity. The X-shaped cavity is saturated with a partial layer porous medium. It is found that an increase in hot source length augments the temperature and fluid flow. ISPH method can easily handle the motion of cylinders in the X-shaped cavity. Different thermal conditions of cylinders can change the temperature distributions in X-cavity.

A detailed review of the archival literature on: fluid dynamics, heat transfer and shape optimization reveals that the optimal shape of natural convective cavities has not been investigated so far, and of course, its physical features are not understood. A prominent application of cavities cooled by natural convection arises in the miniaturization of electronic packaging where some type of temperature constraint must be applied at the directly heated wall. This contemporary issue has been addressed in the present work in an elegant manner by linking a code on computational fluid dynamics with a shape optimization code. Once the velocity and temperature fields were accurately computed for an initial cavity with a certain heat load, a two‐step optimization procedure was implemented in a methodical fashion. A first optimization sub‐problem transformed a square cavity into a rectangular cavity, while the second optimization sub‐problem sculpted the shape of the upper horizontal insulated wall in order to bring down the maximum wall temperature of the directly heated vertical wall, i.e. the so‐called “hot spot”. A bird's eye inspection of the numerical results revealed that the first optimization sub‐problem produced a significant reduction in area (volume), while raising the maximum wall temperature of the heated vertical wall by a small amount. The second optimization sub‐problem supplied a remarkable decrease in the maximum wall temperature of the heated vertical wall, carrying with it a moderate increase in area (volume). At the end, the optimal shape of the cavity turns out to be a disfigured vertical rectangular cavity in which the upper insulated wall forming a parabolic‐skewed cap.

This study aims to numerically examine the influence of various geometric parameters of a novel W-shaped porous cavity undergoing hybrid nanofluid-based magnetohydrodynamic mixed convection. The W-shaped cavity is modified from the classical trapezoidal cavity by constructing a triangular shape at its bottom. This cavity is isothermally active at the bottom, with different numbers and heights of the triangular peak (or undulation). The heated hybrid nanofluid (Cu–Al₂O₃–H₂O) flow is cooled through the translating top wall. Inclined sidewalls are thermally insulated. To compare the impacts of change in geometric parameters, a square cavity under similar boundary conditions is also simulated. This study is carried out systematically addressing the various influences from a range of parameters like side angles (γ), number (m) and height (λ) of the bottom undulation, Reynolds number (Re), Richardson number (Ri), Darcy number (Da), Hartmann number (Ha), hybrid nanoparticles volume fraction (φ) on the overall thermal performance of the cavity.

Applying the finite volume approach, the transport equations involving multiphysical conditions like porous substance, hybrid nanofluid, magnetic field and shearing force are solved numerically by using a written FORTRAN-based code following the SIMPLE algorithm. The algebraic equations are solved over all the control volumes in an iterative process using the alternate direction implicit scheme and the tri-diagonal matrix algorithm. The converged solution of the iterative process is obtained when the relative error levels satisfy the convergence criterion of 10^–8 and 10^–10 for the maximum residuals and the mass defect, respectively.

It is revealed that an increase in the bottom undulation height always improves the thermal energy transfer despite the reduction of fluid volume. Thermal energy transfer significantly depends on the heating and cooling surface lengths, fluid volume in the cavity and the magnitude of the bottom undulation height of the W-shaped cavity. With the increase in bottom undulation height, effective heating length increases by ∼28%, which leads to a ∼15% reduction in the effective volume of the working fluid and a gain in heat transfer by ∼56.48%. In general, the overall thermal energy transport is improved by increasing Re, Ri and Da; whereas it is suppressed by increasing Ha.

There are many opportunities for future research experimentally or numerically, considering different curvature effects, orientations of the geometry, working fluids, boundary conditions, etc. Furthermore, this study could be extended by considering unsteady flow or turbulent flow.

In many modern systems/processes pertaining to materials processing, continuous casting, food processing, chemical reactors, biomedical applications, etc. fine control in the transport process is a major concern. The findings of this analysis can effectively be useful for other applications for getting more control features in terms of achieving the operational objectives. The approach of the system analysis (considering geometrical size parameters to delve into the underlying transport physics) and the obtained simulated results presented in the work can usefully be applicable to similar thermal systems/devices such as materials processing, thermal mixing, chemical reactors, heat exchangers, etc.

From the well-documented and vast pool of literature survey, it is understood that there exists no such investigation on the considered geometry and study. This study contributes a lot to understanding magnetic field moderated thermofluid flow of a hybrid nanofluid in a porous medium filled W-shaped cavity, in consideration of different geometrical shape parameters (undulation peak numbers at bottom wall, peak heights, side angles and heating and cooling length). Findings brought by this study provide great insights into the design and operation under various ranges of multiphysical thermofluid-flow processing phenomena.

The purpose of this study is to carry out a comprehensive analysis of magneto-hydrodynamics (MHD), nanofluidic flow dynamics and heat transfer as well as thermodynamic irreversibility, within a novel butterfly-shaped cavity. Gaining a thorough understanding of these phenomena will help to facilitate the design and optimization of thermal systems with complex geometries under magnetic fields in diverse applications.

To achieve the objective, the finite element method is used to solve the governing equations of the problem. The effects of various controlling parameters such as butterfly-shaped triangle vertex angle (T), Rayleigh number (Ra), Hartmann number (Ha) and magnetic field inclination angle (γ ) on the hydrothermal performance are analyzed meticulously. By investigating the effects of these parameters, the authors contribute to the existing knowledge by shedding light on their influence on heat and fluid transport within butterfly-shaped cavities.

The major findings of this study reveal that the geometrical shape significantly alters fluid motion, heat transfer and irreversibility production. Maximum heat transfer, as well as entropy generation, occurs when the Rayleigh number reaches its maximum, the Hartmann number is minimized and the angle of the magnetic field is set to 30° or 150°, while the butterfly wings angle or vertex angle is kept at a maximum of 120°. The intensity of the magnetic field significantly controls the heat flow dynamics, with higher magnetic field strength causing a reduction in the flow strength as well as heat transfer. This configuration optimizes the heat transfer characteristics in the system.

Further research can be expanded on this study by examining thermal performance under different curvature effects, orientations, boundary conditions and additional factors. This can be accomplished through numerical simulations or experimental investigations under various multiphysical scenarios.

The geometric configurations explored in this research have practical applications in various engineering fields, including heat exchangers, crystallization processes, microelectronic devices, energy storage systems, mixing processes, food processing, air-conditioning, filtration and more.

This study brings value by exploring a novel geometric configuration comprising the nanofluidic flow, and MHD effect, providing insights and potential innovations in the field of thermal fluid dynamics. The findings contribute a lot toward maximizing thermal performance in diverse fields of applications. The comparison of different hydrothermal behavior and thermodynamic entropy production under the varying geometric configuration adds novelty to this study.

The purpose of this paper is to perform numerical simulations based on the incompressible smoothed particle hydrodynamics (ISPH) method for thermo-diffusion convection in a hexagonal-shaped cavity saturated by a porous medium and suspended by a nano-encapsulated phase change material (NEPCM). Here, the solid particles are inserted into a phase change material to enhance its thermal performance.

Superellipse rotated shapes with variable lengths are embedded inside a hexagonal-shaped cavity. These inner shapes are rotated around their center by a uniform circular velocity and their conditions are positioned at high temperature and concentration. The controlling equations in a non-dimensional form were analyzed by using the ISPH method. At first, the validation of the ISPH results is performed. Afterward, the implications of a fusion temperature, lengths/types of the superellipse shapes, nanoparticles parameter and time parameter on the phase change heat transfer, isotherms, isoconcentration and streamlines were addressed.

The achieved simulations indicated that the excess in the length of an inner superellipse shape augments the temperature, concentration and maximum of the streamlines in a hexagonal-shaped cavity. The largest values of mean Nusselt number are attained at the inner rhombus shape with convex (n = 1.5) and the largest values of mean Sherwood number are attained at the inner rectangle shape with rounded corners (n = 4).

The ISPH method is developed to emulate the influences of the uniform rotation of the novel geometry shapes on heat/mass transport inside a hexagonal-shaped cavity suspended by NEPCM and saturated by porous media.

The purpose of this paper is to study the natural convection and radiation heat transfer inside Nonagon inclined cavity with variable heated source length, which contains a porous medium saturated with nanofluid in the presence of uniform heat generation or absorption under the effect of uniform magnetic field with variable direction. The shape factor of nano particles is taking account for the model of nanofluid.

This study is established in two-dimensional space. The 2D numerical study is effectuated with Comsol Multiphysics based on the on the finite element method. The 2D equation system is exposed on dimensionless form taking into account the boundary conditions.

Results obtained show that the convection heat transfer is ameliorated with the augmentation of heated source length. The convection heat transfer is enhanced by increasing Rayleigh, Darcy numbers and the heated source length; however, it is reduced by rising Hartmann number. The presence of radiation parameter lead to improve the convection heat transfer in the presence of both uniform heat generation/absorption. The average Nusselt number reaches a maximum for an inclination of cavity γ = 45° and a minimum for γ = 60°. Both the increase of the shape factor of nano particles and the solid fraction of nano particles improve the convection heat transfer.

Different studies have been realized to study the heat transfer inside cavity contains porous medium saturated with nanofluid under magnetic field effect. In this work, the Nonagon geometric of cavity studied has never been studied. In addition, the effect of radiation parameter with relation of the shape factor of nanoparticles in the presence of uniform heat generation/absorption on the heat transfer performance have never been investigated. Also, the effect of magnetic field direction with relation of the inclination cavity on heat transfer performance.

This paper aims to present the numerical models and experimental outcomes pertain to the performance of the parabolic dish concentrator system with a modified cavity-type receiver (hemispherical-shaped).

The numerical models were evolved based on two types of boundary conditions; isothermal receiver surface and non-isothermal receiver surface. For validation of the numerical models with experimental results, three statistical terms were used: mean of absolute deviation, R² and root mean square error.

The thermal efficiency of the receiver values obtained using the numerical model with a non-isothermal receiver surface found agreeing well with experimental results. The numerical model with non-isothermal surface boundary condition exhibited more accurate results as compared to that with isothermal surface boundary condition. The receiver heat loss analysis based on the experimental outcomes is also carried out to estimate the contributions of various modes of heat transfer. The losses by radiation, convection and conduction contribute about 27.47%, 70.89% and 1.83%, in the total receiver loss, respectively.

An empirical correlation based on experimental data is also presented to anticipate the effect of studied parameters on the receiver collection efficiency. The anticipations may help to adopt the technology for practical use.

The developed models would help to design and anticipating the performance of the dish concentrator system with a modified cavity receiver that may be used for applications e.g. power generation, water heating, air-conditioning, solar cooking, solar drying, energy storage, etc.

The originality of this manuscript comprising presenting a differential-mathematical analysis/modeling of hemispherical shaped modified cavity receiver with non-uniform surface temperature boundary condition. It can estimate the variation of temperature of heat transfer fluid (water) along with the receiver height, by taking into account the receiver cavity losses by means of radiation and convection modes. The model also considers the radiative heat exchange among the internal ring-surface elements of the cavity.

This paper investigates a numerical treatment to steady mixed convection in a lid-driven square cavity with arc-shaped moving wall or lid. The horizontal walls are thermally insulated. The vertical left wall is kept isothermally at high temperature, while the right arc-shaped moving wall is kept isothermally at low temperature.

Finite difference method in Cartesian coordinates with the upwind scheme is used in numerical solution. The irregular curved boundary has been treated by invoking non-uniform mesh grid with the ability to generate boundary fitted nodes. Jensen’s formulas of Neumann’s boundary condition have derived for the non-uniform mesh grid. The arc-shaped moving wall is considered as a segment of a rotating cylinder; thus, the studied pertinent parameters are the rotational speed of the arc-shaped wall in both aiding and opposing directions ω = −1,000-1,000, the arc-wall radius Ro = 0.5099-1.534 which is governed by its center (X₀, Y₀) = (1.1, 0.5)-(2.45, 0.5) and the Rayleigh number Ra = 10³ − 10⁶.

The results have shown that for low Rayleigh numbers, the rotational speed enhances heat transfer irrespective to the direction of rotation, while for high Rayleigh numbers, the aiding anticlockwise rotation (negative ω) enhances the heat transfer, while the opposing clockwise rotation (positive ω) manifests a retardation effect on the heat transfer. For a motionless arc-wall, its radius is ineffective for aiding heat transfer, while for non-zero arc-shaped wall speed, the heat transfer is an increasing function of its radius.

The arc-shaped moving wall has never been investigated until now. Therefore, the originality of this paper is due to studying the mixed convection in a lid-driven cavity with moving arc-shaped wall and inspecting the effect of its curvature and rotational speed in both directions on the flow and thermal fields.

This paper aims to investigate the conformable fractal approaches of unsteady natural convection in a partial layer porous H-shaped cavity suspended by nano-encapsulated phase change material (NEPCM) by the incompressible smoothed particle hydrodynamics method.

The partial hot sources with variable height L_Hot are in the H-cavity’s sides and center. The performed numerical simulations are obtained at the variations of the following parameters: source of hot length L_Hot = (0.4–1.6), conformable fractal parameter α (0.97–1), fusion temperature θ_f (0.05–0.9), thermal radiation parameter Rd (0–7), Rayleigh number Ra (10³–10⁶), Darcy parameter Da (10⁻² to 10⁻⁵) and Hartmann number Ha (0–80).

The main outcomes showed the implication of hot source length L_Hot, Rayleigh number and fusion temperature in controlling the contours of a heat capacity within H-shaped cavity. The presence of a porous layer in the right zone of H-shaped cavity prevents the nanofluid flow within this area at lower Darcy parameter. An increment in the thermal radiation parameter declines the heat transfer and changes the heat capacity contours within H-shaped cavity. The velocity field is strongly enhanced by an augmentation on Rayleigh number. Increasing the Hartmann number shrinks the velocity field within H-shaped cavity.

The novelty of this work is solving the conformable fractal approaches of unsteady natural convection in a partial layer porous H-shaped cavity suspended by NEPCM.

The purpose of this paper is to examine numerically the magnetohydrodynamic (MHD) free convection and thermal radiation heat transfer of single walled carbon nanotubes-water nanofluid within T-inverted shaped corrugated cavity comprising porous media including uniform heat source/sink for solar energy power plants applications.

The two-dimensional numerical simulation is performed by drawing on Comsol Multiphysics program, based on the finite element process.

The important results obtained show that increasing numbers of Rayleigh and Darcy and the parameter of radiation enhance the flow of convection heat. Furthermore, by increasing the corrugation height, the convection flow increases, but it decreases with the multiplication of the corrugation height. The use of a flat cavity provides better output than a corrugated cavity.

The role of surface corrugation parameters on the efficiency of free convection and heat transfer of thermal radiation within the porous media containing the T-inverted corrugated cavity including uniform heat source/sink under the impact of Lorentz forces has never been explored. A contrast is also established between a flat cavity and a corrugated one.