Search results

This paper aims to present the analytical investigation on an unsteady magneto-convective rotation of an electrically conducting non-Newtonian Casson hybrid nanoliquid past a vertical porous plate. The effects of thermal radiation, heat source/sink and hydrodynamic slip phenomenon are also taken into account. Ethylene glycol (EG) is adopted as a base Casson fluid. The Casson fluid model is accounted for to describe the rheological characteristics of non-Newtonian fluid. EG with copper and alumina nanoparticles is envisaged as a non-Newtonian Casson hybrid nanoliquid. The copper-alumina-ethylene glycol hybrid nanoliquid is considered as the regenerative coolant.

The perturbation method is implemented to develop the analytical solution of the modeled equations. Acquired solutions are used to calculate the shear stresses and the rate of heat transfer in terms of amplitudes and phase angles. Numerical results are figured out and tabled to inspect the physical insights of various emerging parameters on the pertinent flow characteristics.

This exploration discloses that the velocity profiles are strongly diminished by the slip parameter. Centrifugal and Coriolis forces caused by the plate rotation are found to significantly change the entire flow regime. The supplementation of nanoparticles is to lessen the amplitude of the heat transfer rate. A comparative study is carried out to understand the improvement of heat transfer characteristics of Casson hybrid nanoliquid and Casson nanoliquid. However, the Casson hybrid nanoliquid exhibits a lower rate of heat transfer than the usual Casson nanoliquid.

This proposed model would be pertinent in oceanography, meteorology, atmospheric science, power engineering, power and propulsion generation, solar energy transformation, thermoelectric and sensing material processing, tumbler in polymer manufacturing, etc. Motivated by such practical implications, the proposed study has been unfolded.

The novelty of this paper is to examine the simultaneous effects of the magnetic field, Coriolis force, suction/injection, slip condition and thermal radiation on non-Newtonian Casson hybrid nanoliquid flow past an oscillating vertical plate subject to periodically heating in a rotating frame of reference. A numerical comparison is also made with the existing published results under some limiting cases and it is found that the results are in good agreement with them. An in-depth review of the literature and the author’s best understanding find that such aspects of the problem have so far remained unexplored.

The purpose of this study is to analyze an unsteady MHD Darcy flow of nonNewtonian hybrid nanoliquid past an exponentially accelerated vertical plate under the influence of velocity slip, Hall and ion slip effects in a rotating frame of reference. The fluids in the flow domain are assumed to be viscously incompressible electrically conducting. Sodium alginate (SA) has been taken as a base Casson liquid. A strong uniform magnetic field is applied under the assumption of low magnetic Reynolds number. Effect of Hall and ion-slip currents on the flow field is examined. The ramped heating and time-varying concentration at the plate are taken into consideration. First-order homogeneous chemical reaction and heat absorption are also considered. Copper and alumina nanoparticles are dispersed in base fluid sodium alginate to be formed as hybrid nanoliquid.

The model problem is first formulated in terms of partial differential equations (PDEs) with physical conditions. Laplace transform method (LTM) is used on the nondimensional governing equations for their closed-form solution. Based on these results, expressions for nondimensional shear stresses, rate of heat and mass transfer are also determined. Graphical presentations are chalked out to inspect the impacts of physical parameters on the pertinent physical flow characteristics. Numerical values of the shear stresses, rate of heat and mass transfer at the plate are tabulated for various physical parameters.

Numerical exploration reveals that a significant increase in the secondary flow (i.e. crossflow) near the plate is guaranteed with an augmenting in Hall parameter or ion slip parameter. MHD and porosity have an opposite effect on velocity component profiles for both types of nanoliquids. Result addresses that both shear stresses are strongly enhanced by the Casson effect. Also, hybrid nanosuspension in Casson fluid (sodium alginate) exhibits a lower rate of heat transfer than usual nanoliquid.

This model may be pertinent in cooling processes of metallic infinite plate in bath and hybrid magnetohydrodynamic (MHD) generators, metallurgical process, manufacturing dynamics of nanopolymers, magnetic field control of material processing, synthesis of smart polymers, making of paper and polyethylene, casting of metals, etc.

The originality of this study is to obtain an analytical solution of the modeled problem by using the Laplace transform method (LTM). Such an exact solution of nonNewtonian fluid flow, heat and mass transfer is rare in the literature. It is also worth remarking that the influence of Hall and ion slip effects on the flow of nonNewtonian hybrid nanoliquid is still an open question.

The purpose of this study is to provide a numerical investigation of Casson nanofluid along a vertical nonlinear stretching sheet with variable thermal conductivity and viscosity.

The boundary-layer equations are presented in the dimensionless form using proper non-similar transformations. The subsequent non-dimensional nonlinear partial differential equations are solved using the implicit finite difference technique. To linearize the nonlinear terms present in these equations, the quasilinearization technique is used.

The investigation showed graphically the temperature, velocity and nanoparticle volume fraction for particular included physical parameters. It is observed that the velocity profile decreases with an increase in the values of Casson fluid parameter while increases with an increase in the viscosity variation parameter. The temperature profile enhances for large values of velocity variation parameter and thermal conductivity parameter while it reduces for large values of thermal buoyancy parameter. Further, the Nusselt number and skin-friction coefficient are introduced which are helpful in determining the physical aspects of Casson nanofluid flow.

The immediate control of heat transfer in the industrial system is crucial because of increasing energy prices. Recently, nanotechnology is proposed to control the heat transfer phenomenon. Ongoing research in complex nanofluid has been fruitful in various applications such as solar thermal collectors, nuclear reactors, electronic equipment and diesel–electric conductor. A reasonable amount of nanoparticle when added to the base fluid in solar thermal collectors serves to deeper absorption of incident radiation, and hence it upgrades the efficiency of the solar thermal collectors.

The non-similar solution of Casson nanofluid due to a vertical nonlinear stretching sheet with variable viscosity and thermal conductivity is discussed in this work.

This paper aims to numerically investigate the two-dimensional unsteady laminar magnetohydrodynamic bioconvection flow and heat transfer of an electrically conducting non-Newtonian Casson thin film with uniform thickness over a horizontal elastic sheet emerging from a slit in the presence of viscous dissipation. The composite effects of variable heat, mass, nanoparticle volume fraction and gyrotactic micro-organism flux are considered as is hydrodynamic (wall) slip. The Buongiorno nanoscale model is deployed which features Brownian motion and thermophoresis effects. The model studies the manufacturing fluid dynamics of smart magnetic bio-nano-polymer coatings.

The coupled non-linear partial differential boundary-layer equations governing the flow, heat and nano-particle and micro-organism mass transfer are reduced to a set of coupled non-dimensional equations using the appropriate transformations and then solved as an nonlinear boundary value problem with the semi-numerical Liao homotopy analysis method (HAM).Validation with a generalized differential quadrature (GDQ) numerical technique is included.

An increase in velocity slip results in a significant decrement in skin friction coefficient and Sherwood number, whereas it generates a substantial enhancement in Nusselt number and motile micro-organism number density. The computations reveal that the bioconvection Schmidt number decreases the micro-organism concentration and boundary-layer thickness which is attributable to a rise in viscous diffusion rate. Increasing bioconvection Péclet number substantially elevates the temperatures in the regime, thermal boundary layer thickness, nanoparticle concentration values and nano-particle species boundary layer thickness. The computations demonstrate the excellent versatility of HAM and GDQ in solving nonlinear multi-physical nano-bioconvection flows in thermal sciences and furthermore are relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.

The numerical study is valid for two-dimensional, unsteady, laminar Casson film flow with nanoparticles over an elastic sheet in presence of variable heat, mass and nanoparticle volume fraction flux. The film has uniform thickness and flow is transpiring from slit which is fixed at origin.

The study has significant applications in the manufacturing dynamics of nano-bio-polymers and the magnetic field control of materials processing systems. Furthermore, it is relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.

The originality of the study is to address the simultaneous effects of unsteady and variable surface fluxes on Casson nanofluid transport of gyrotactic bio-convection thin film over a stretching sheet in the presence of a transverse magnetic field. Validation of HAM with a GDQ numerical technique is included. The present numerical approaches (HAM and GDQ) offer excellent promise in simulating such multi-physical problems of interest in thermal thin film rheological fluid dynamics.

The purpose of this paper is to discuss a combined similarity-numerical approach that is used to study the unsteady two-dimensional flow of a non-Newtonian nanofluid over a contracting cylinder using Buongiorno’s model and the Casson fluid model that is used to characterize the non-Newtonian fluid behavior.

Similarity transformations are employed to transform the unsteady Navier-Stokes partial differential equations into a system of ordinary differential equations. The transformed equations are then solved numerically by means of the very robust symbolic computer algebra software MATLAB employing the routine bvpc45.

The effect of increasing values of the Casson parameter is to suppress the velocity field (in absolute sense), the temperature and concentration decrease as Casson parameter increase. The heat and mass transfer rates decrease with the increase of unsteadiness parameters and Brownian motion parameter. In addition, they increase as the Casson parameter and the thermophoresis parameter increase.

The problem is relatively original and represents a very important contribution to the field of non-Newtonian nanofluids.

In various kinds of materials processes, heat and mass transfer control in nuclear phenomena, constructing buildings, turbines and electronic circuits, etc., there are numerous problems that cannot be enlightened by uniform wall temperature. To explore such physical phenomena researchers incorporate non-uniform or ramped temperature conditions at the boundary, the purpose of this paper is to achieve the closed-form solution of a time-dependent magnetohydrodynamic (MHD) boundary layer flow with heat and mass transfer of an electrically conducting non-Newtonian Casson fluid toward an infinite vertical plate subject to the ramped temperature and concentration (RTC). The consequences of chemical reaction in the mass equation and thermal radiation in the energy equation are encompassed in this analysis. The flow regime manifests with pertinent physical impacts of the magnetic field, thermal radiation, chemical reaction and heat generation/absorption. A first-order chemical reaction that is proportional to the concentration itself directly is assumed. The Rosseland approximation is adopted to describe the radiative heat flux in the energy equation.

The problem is formulated in terms of partial differential equations with the appropriate physical initial and boundary conditions. To make the governing equations dimensionless, some suitable non-dimensional variables are introduced. The resulting non-dimensional equations are solved analytically by applying the Laplace transform method. The mathematical expressions for skin friction, Nusselt number and Sherwood number are calculated and expressed in closed form. Impacts of various associated physical parameters on the pertinent flow quantities, namely, velocity, temperature and concentration profiles, skin friction, Nusselt number and Sherwood number, are demonstrated and analyzed via graphs and tables.

Graphical analysis reveals that the boundary layer flow and heat and mass transfer attributes are significantly varied for the embedded physical parameters in the case of constant temperature and concentration (CTC) as compared to RTC. It is worthy to note that the fluid velocity is high with CTC and lower for RTC. Also, the fluid velocity declines with the augmentation of the magnetic parameter. Moreover, growth in thermal radiation leads to a declination in the temperature profile.

The proposed model has relevance in numerous engineering and technical procedures including industries related to polymers, area of chemical productions, nuclear energy, electronics and aerodynamics. Encouraged by such applications, the present work is undertaken.

Literature review unveils that sundry studies have been carried out in the presence of uniform wall temperature. Few studies have been conducted by considering non-uniform or ramped wall temperature and concentration. The authors are focused on an analytical investigation of an unsteady MHD boundary layer flow with heat and mass transfer of non-Newtonian Casson fluid past a moving plate subject to the RTC at the plate. Based on the authors’ knowledge, the present study has, so far, not appeared in scientific communications. Obtained analytical solutions are verified by considering particular cases of the published works.

To amend the efficiency of engineering processes and electronic devices, it is very urgent to assess the irreversibility in the term entropy generation (EG). The efficiency of energy transportation in a system can be improved by minimization of the rate of EG. In this context, the aim of the present study is to estimate irreversible losses of an unsteady magnetohydrodynamic (MHD) flow of a viscous incompressible electrically conducting non-Newtonian molybdenum disulfide-polyethylene glycol Casson nanofluid past a moving vertical plate with slip condition under the influence of Hall current, thermal radiation, internal heat generation/absorption and first-order chemical reaction. Molybdenum disulfide (MoS₂) nanoparticles are dispersed in the base fluid polyethylene glycol (PEG) to make Casson nanofluid. Casson fluid model is considered to characterize the rheology of the non-Newtonian fluid, whereas Rosseland approximation is adopted to simulate the thermal radiative heat flux in the energy equation.

The closed-form solutions are obtained for the model equations by using the Laplace transform method (LTM). Graphs and tables are prepared to examine the impact of pertinent flow parameters on the pertinent flow characteristics. The energy efficiency of the system via the Bejan number is studied extensively.

Analysis reveals that Hall current has diminishing behavior on entropy production of the thermal system. Strengthening of the magnetic field declines the velocity components and prop-ups the rate of EG. Adding nanoparticles into the base fluid reduces the EG, whereas there are an optimum volume fraction of nanoparticles for which the EG is minimized. Further, the rate of decay of EG is prominent in molybdenum disulfide-polyethylene glycol in comparison to PEG.

The results of this study would benefit the industrial sector in achieving the maximum heat transfer at the cost of minimum irreversibilities with an optimal choice of embedded thermophysical parameters. In view of this agenda, this study would be adjuvant in powder technology, polymer dynamics, metallurgical process, manufacturing dynamics of nano-polymers, petroleum industries, chemical industries, magnetic field control of material processing, synthesis of smart polymers, etc.

The novelty of this study is to encompass the analytical solution by using the LTM. Such an exact solution of non-Newtonian fluid flow is rare in the literature. Limited research articles are available in the field of EG analysis during the flow of non-Newtonian nanoliquid subject to a strong magnetic field.

The main purpose of this numerical work is to study free convection of Casson fluid in a square differentially heated cavity taking into account the effects of thermal radiation and viscous dissipation.

The cavity is heated from the left vertical wall and cooled from the right vertical wall while horizontal walls are insulated. The governing partial differential equations invoking Rosseland approximation for thermal radiation with corresponding boundary conditions have been solved by finite difference method of the second-order accuracy using dimensionless variables stream function, vorticity and temperature. The governing parameters are Rayleigh number (Ra = 10⁵), Prandtl number (Pr = 0.1, 0.7, 7.0), Casson parameter (γ = 0.1-5.0), radiation parameter (R_d = 0-10), Eckert number (Ec = 0-1.0).

It is found that an increase in Casson parameter leads to the heat transfer enhancement and fluid flow intensification. While a growth of Eckert number illustrates the heat transfer suppression.

The originality of this work is to analyze for the first-time natural convective fluid flow and heat transfer of a Casson fluid within a differentially heated square cavity under the effects of thermal radiation and viscous dissipation. The results would benefit scientists and engineers to become familiar with the flow behavior of such non-Newtonian fluids, and the way to predict the properties of this flow for possibility of using this specific fluid in various engineering and industrial processes, such as chyme movement in intestine, blood flows, lubrication processes with grease and heavy oils, glass blowing, electronic chips, food stuff, slurries, etc.

The study of instability due to the effects of Maxwell–Cattaneo law and internal heat source/sink on Casson dielectric fluid horizontal layer is an open question. Therefore, in this paper, the impact of internal heat generation/absorption on Rayleigh–Bénard convection in a non-Newtonian dielectric fluid with Maxwell–Cattaneo heat flux is investigated. The horizontal layer of the fluid is cooled from the upper boundary, while an isothermal boundary condition is utilized at the lower boundary.

The Casson fluid model is utilized to characterize the non-Newtonian fluid behavior. The horizontal layer of the fluid is cooled from the upper boundary, while an isothermal boundary condition is utilized at the lower boundary. The governing equations are non-dimensionalized using appropriate dimensionless variables and the subsequent equations are solved for the critical Rayleigh number using the normal mode technique (NMT).

Results are presented for two different cases namely dielectric Newtonian fluid (DNF) and dielectric non-Newtonian Casson fluid (DNCF). The effects of Cattaneo number, Casson fluid parameter, heat source/sink parameter on critical Rayleigh number and wavenumber are analyzed in detail. It is found that the value Rayleigh number for non-Newtonian fluid is higher than that of Newtonian fluid; also the heat source aspect decreases the magnitude of the Rayleigh number.

The effect of Maxwell–Cattaneo heat flux and internal heat source/sink on Rayleigh-Bénard convection in Casson dielectric fluid is investigated for the first time.

The purpose of this paper is to examine the interaction effects of a transverse magnetic field and slip effects of Casson fluid with suspended nanoparticles over a nonlinear stretching surface. Mathematical modeling for the law of conservation of mass, momentum, heat and concentration of nanoparticles is executed.

Governing nonlinear partial differential equations are reduced into nonlinear ordinary differential equations and then shooting method is employed for its solution. The slope of the linear regression line of the data points is calculated to measure the rate of increase/decrease in the reduced Nusselt number.

The effects of magnetic parameter (0=M=4), Casson parameter (0.1=β<8), nonlinear stretching parameter (0=n=3) and porosity parameter (0=P=6) on axial velocity are shown graphically. Numerical results were compared with another numerical approach and an excellent agreement was observed. This study reveals the fact that the Brownian motion parameter and boundary layer thickness have a direct relationship with temperature. Also, Brownian motion and thermophoresis contribute to an increase in the thermal boundary layer thickness.

Despite the immense significance and repeated employment of non-Newtonian fluids in industry and science, no attempt has been made up till now to inspect the Casson nanofluid flow with a permeable nonlinear stretching surface.