Search results

The article highlights the importance of the company car as a major motivational tool used by employers when developing their employment policies. Research was carried out in a specific industry to highlight the differences that were perceived by employees in competing companies within a specific market sector. Changes in the Government Tax Laws with regard to “benefit in kind”, have tainted the individuals’ view of what was a key motivational tool. The different variables that employers assume are essential factors are highlighted, whilst closer analysis indicates the differing perceived value to the employee. The differing views are based on the varying levels of needs sustained by employees whilst the examination of the hierarchy of these needs is identified within the target groups selected. A clearer perception of how a major motivational tool can act as a demotivator is highlighted, and the findings are evaluated in the conclusions of the article.

July 21, 1966. Negligence — Contributory negligence — Plaintiff workman crushed by guide car in steelworks — Movement of car without warning after plaintiff discharged from car to repair another vehicle —Car driver's admitted negligence — Plaintiff's assumption that guide car would not be moved — Whether assumption justified — Whether failure to keep a proper look out — Whether contributory negligence. Damages — Quantum — Semi‐paraplegic — Grave injuries to lower part of body — Plaintiff fit for light work and mobile — Proper amount of damages.

This study aims to achieve optimum flow separation control for a road vehicle using a reverse flow fan on rear side.

A full-length reverse flow fan array (fan’s air speed is 50% of the car’s speed) is attached throughout the width of the vehicle at rear edge corner.

The reverse flow fan array positioned at rear edge of car pushes the airflow against the car’s rear window. It creates the recirculation region and alters the pressure distribution. This reduces the lift coefficient by 150%, which becomes the downforce and reduces the drag coefficient by 22%. As the car speed increases, fan speed should also be increased for effective flow control.

This active flow control method for 3D Ahmed car body has been studied computationally at low speed (40 m/s).

This design increases the downforce, thus gives better cornering speed and stability, and decreases the drag which improves fuel efficiency. It can be used for effective flow control of cars (hatchback/sedan). The findings can be applied to the bluff bodies, road vehicles, UAV and helicopter fuselage for flow separation control.

The fan array is attached on car’s rear side, which blows air against the car’s rear window. It alters the pressure distribution and aerodynamics forces favorably. But the existing high-speed fan used in a sports cars sucks the air from bottom and pushes it rearward, which increases both the traction force and drag.

While there has been extensive research on understanding the effects of online reviews on product sales, there is not enough investigation of the inter-relationships between online reviews, online search and product sales. The study attempts to address this gap in the context of the Indian car market.

The research uses text mining and considers six important review features volume, valence, length, deviation of valence, sentiment and readability within the heuristic and systematic model of information processing. Panel data regression is used along with mediation analysis to study the inter-relationships between features of reviews, online search and sales.

The study finds that numerical heuristic features significantly affect sales and online search, numerical systematic feature affects sales and the textual heuristic and systematic features do not affect sales or online search in the Indian car market. Further, online search mediates the association between features of reviews and sales of cars.

Although only car sales data from India is considered in this research, similar relationships between review features, online search and sales could exist for the car market of other countries as well.

This research uncovers the unique role of online search as a mediator between review features and sales, whereas prior literature has considered review features and online search as independent variables that affect sales.

The coupling process between the loading mechanism and the tank car mouth is a crucial step in the tank car loading process. The purpose of this paper is to design a method to accurately measure the pose of the tanker car.

The collected image is first subjected to a gray enhancement operation, and the black parts of the image are extracted using Otsu’s threshold segmentation and morphological processing. The edge pixels are then filtered to remove outliers and noise, and the remaining effective points are used to fit the contour information of the tank car mouth. Using the successfully extracted contour information, the pose information of the tank car mouth in the camera coordinate system is obtained by establishing a binocular projection elliptical cone model, and the pixel position of the real circle center is obtained through the projection section. Finally, the binocular triangulation method is used to determine the position information of the tank car mouth in space.

Experimental results have shown that this method for measuring the position and orientation of the tank car mouth is highly accurate and can meet the requirements for industrial loading accuracy.

A method for extracting the contours of various types of complex tanker mouth is proposed. This method can accurately extract the contour of the tanker mouth when the contour is occluded or disturbed. Based on the binocular elliptic conical model and perspective projection theory, an innovative method for measuring the pose of the tanker mouth is proposed, and according to the space characteristics of the tanker mouth itself, the ambiguity of understanding is removed. This provides a new idea for the automatic loading of ash tank cars.

This paper aims to guide the implementation of noise reduction measures in hoistway and reduce the aerodynamic noise generated by elevator operation, this paper aims to propose an aerodynamic noise analysis method that can solve the flow field in hoistway.

A turbulence-acoustic model solving the flow field in a hoistway and a numerical wind hoistway model of the ultra-high-speed elevator were established by using large eddy simulation (LES) and Curle acoustic theory.

The characteristics of pulsating flow field and aerodynamic noise around ultra-high-speed elevator are analyzed. The asymmetric characteristics of the flow field could be observed using the turbulent kinetic energy and the instantaneous vortexes in the wind hoistway model. Vortex shedding, air flow separation and recombination around the car were the key factors for aerodynamic noise generation. The sound pressure level was approximately linear to the logarithm of car speed. The increase of car deflection angle in a certain range would reduce the peak frequency of wake noise and increase the sound pressure level (SPL) value.

This paper provides important guidance for researches studying the aerodynamic noise in the hoistway and the technical personnel that look for the reduction measures, which greatly improves the shortcomings in the numerical simulation of the aerodynamic noise of the hoistway.

Algorithms are widely used to manage various activities in the gig economy. Online car-hailing platforms, such as Uber and Lyft, are exemplary embodiments of such algorithmic management, where drivers are managed by algorithms for task allocation, work monitoring and performance evaluation. Despite employing substantially, the platforms face the challenge of maintaining and fostering drivers' work engagement. Thus, this study aims to examine how the algorithmic management of online car-hailing platforms affects drivers' work engagement.

Drawing on the transactional theory of stress, the authors examined the effects of algorithmic monitoring and fairness on online car-hailing drivers' work engagement and revealed the mediation effects of challenge-hindrance appraisals. Based on survey data collected from 364 drivers, the authors' hypotheses were examined using partial least squares structural equation modeling (PLS-SEM). The authors also applied path comparison analyses to further compare the effects of algorithmic monitoring and fairness on the two types of appraisals.

This study finds that online car-hailing drivers' challenge-hindrance appraisals mediate the relationship between algorithmic management characteristics and work engagement. Algorithmic monitoring positively affects both challenge and hindrance appraisals in online car-hailing drivers. However, algorithmic fairness promotes challenge appraisal and reduces hindrance appraisal. Consequently, challenge and hindrance appraisals lead to higher and lower work engagement, respectively. Further, the additional path comparison analysis showed that the hindering effect of algorithmic monitoring exceeds its challenging effect, and the challenge-promoting effect of algorithmic fairness is greater than the algorithm's hindrance-reducing effect.

This paper reveals the underlying mechanisms concerning how algorithmic monitoring and fairness affect online car-hailing drivers' work engagement and fills the gap in the research on algorithmic management in the context of online car-hailing platforms. The authors' findings also provide practical guidance for online car-hailing platforms on how to improve the platforms' algorithmic management systems.

This study aims to explore the formation mechanism of aerodynamic noise of a high-speed maglev train and understand the characteristics of dipole and quadrupole sound sources of the maglev train at different speed levels.

Based on large eddy simulation (LES) method and Kirchhoff–Ffowcs Williams and Hawkings (K-FWH) equations, the characteristics of dipole and quadrupole sound sources of maglev trains at different speed levels were simulated and analyzed by constructing reasonable penetrable integral surface.

The spatial disturbance resulting from the separation of the boundary layer in the streamlined area of the tail car is the source of aerodynamic sound of the maglev train. The dipole sources of the train are mainly distributed around the radio terminals of the head and tail cars of the maglev train, the bottom of the arms of the streamlined parts of the head and tail cars and the nose tip area of the streamlined part of the tail car, and the quadrupole sources are mainly distributed in the wake area. When the train runs at three speed levels of 400, 500 and 600 km·h⁻¹, respectively, the radiated energy of quadrupole source is 62.4%, 63.3% and 71.7%, respectively, which exceeds that of dipole sources.

This study can help understand the aerodynamic noise characteristics generated by the high-speed maglev train and provide a reference for the optimization design of its aerodynamic shape.

In this paper, the C80 special coal gondola car was taken as the subject, and the load test data of the car body at the center plate, side bearing and coupler measured on the dedicated line were broken down to generate the random load component spectrums of the car body under five working conditions, namely expansion, bouncing, rolling, torsion and pitching according to the typical motion attitude of the car body.

On the basis of processing the measured load data, the random load component spectrums were equivalently converted into sinusoidal load component spectrums for bench test based on the principle of pseudo-damage equivalence of load. Relying on the fatigue and vibration test bench of the whole railway wagon, by taking each sinusoidal load component spectrum as the simulation target, the time waveform replication (TWR) iteration technology was adopted to create the drive signal of each loading actuator required for the fatigue test of car body on the bench, and the drive signal was corrected based on the equivalence principle of measured stress fatigue damage to obtain the fatigue test loads of car body under various typical working conditions.

The fatigue test results on the test bench were substantially close to the measured test results on the line. According to the results, the relative error between the fatigue damage of the car body on the test bench and the measured damage on the line was within the range of −16.03%–27.14%.

The bench test results basically reproduced the fatigue damage of the key parts of the car body on the line.