Search results

This paper explores how conflicting institutional logics shape the behaviors of macro- and micro-level actors in their use of a calculative practice. Thereby, this paper explains how quantification can undermine the intended purpose of a governance system based on a single number.

The study draws upon the literature on calculative practices and institutional logics to present the case of how a single number—specifically the conversion factor for Atlantic Cod, established by macro-level actors for the purposes of governance within the Norwegian fishing industry—is interpreted and used by micro-level actors in the industry. The study is based on documents, field observations and interviews with fishers, landing facilities, and control authorities.

The use of the conversion factor, while intended to protect fish stock and govern industry actions, does not always align with the institutional logics of micro-level actors. Especially during the winter season, these actors may seek to serve their interests, leading to potential system gaming. The reliance on a single number that overlooks seasonal nuances can motivate unintended behaviors, undermining the governance system’s intentions.

Integrating the literature on calculative practices with an institutional logics perspective, this study offers novel insights into the challenges of using quantification for the governance of complex industries. In particular, the paper reveals that when the logics of macro- and micro-level actors conflict in a single-number governance system, unintended outcomes arise due to a domination of the macro-level logics.

The main purpose of this study resides essentially in the development of a new tool to quantify the biomass in the bioreactor operating under steady state conditions.

Modeling is the most relevant tool for understanding the functioning of some complex processes such as biological wastewater treatment. A steady state model equation of activated sludge model 1 (ASM1) was developed, especially for autotrophic biomass (XBA) and for oxygen uptake rate (OUR). Furthermore, a respirometric measurement, under steady state and endogenous conditions, was used as a new tool for quantifying the viable biomass concentration in the bioreactor.

The developed steady state equations simplified the sensitivity analysis and allowed the autotrophic biomass (XBA) quantification. Indeed, the XBA concentration was approximately 212 mg COD/L and 454 mgCOD/L for SRT, equal to 20 and 40 d, respectively. Under the steady state condition, monitoring of endogenous OUR permitted biomass quantification in the bioreactor. Comparing XBA obtained by the steady state equation and respirometric tool indicated a percentage deviation of about 3 to 13%. Modeling bioreactor using GPS-X showed an excellent agreement between simulation and experimental measurements concerning the XBA evolution.

These results confirmed the importance of respirometric measurements as a simple and available tool for quantifying biomass.

Artificial intelligence (AI) models are demonstrating day by day that they can find long-term solutions to improve wastewater treatment efficiency. Artificial neural networks (ANNs) are one of the most important of these models, and they are increasingly being used to forecast water resource variables. The goal of this study was to create an ANN model to estimate the removal efficiency of biological oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP) and total suspended solids (TSS) at the effluent of various primary and secondary treatment methods in a wastewater treatment plant (WWTP).

The MATLAB App Designer model was used to generate the data set. Various combinations of wastewater quality data, such as temperature(T), TN, TP and hydraulic retention time (HRT) are used as inputs into the ANN to assess the degree of effect of each of these variables on BOD, TN, TP and TSS removal efficiency. Two of the models reflect two different types of primary treatment, while the other nine models represent different types of subsequent treatment. The ANN model’s findings are compared to the MATLAB App Designer model. For evaluating model performance, mean square error (MSE) and coefficient of determination statistics (R2) are utilized as comparative metrics.

For both training and testing, the R values for the ANN models were greater than 0.99. Based on the comparisons, it was discovered that the ANN model can be used to estimate the removal efficiency of BOD, TN, TP and TSS in WWTP and that the ANN model produces very similar and satisfying results to the APPDESIGNER model. The R-value (Correlation coefficient) of 0.9909 and the MSE of 5.962 indicate that the model is accurate. Because of the many benefits of the ANN models used in this study, it has a lot of potential as a general modeling tool for a range of other complicated process systems that are difficult to solve using conventional modeling techniques.

The objective of this study was to develop an ANN model that could be used to estimate the removal efficiency of pollutants such as BOD, TN, TP and TSS at the effluent of various primary and secondary treatment methods in a WWTP. In the future, the ANN could be used to design a new WWTP and forecast the removal efficiency of pollutants.

This paper outlines the development of the principle of materiality in the European accounting framework, from the Modernization Directive (2003/51/EC) to the NFI Directive (2014/95/EU) and on to the proposals for a Corporate Sustainability Reporting (CSR) Directive (2021/0104 (COD)). The authors highlight how the requirements for corporate reporting in terms of sustainability matters have changed, underlining the main issues that require further attention by practitioners, researchers and legislators.

This paper is based upon a historic analysis of European Union (EU) regulations in the field of non-financial and sustainability reporting and how these have changed over time. A conceptual comparison of different reporting concepts is presented, and changes in their relevance to the EU accounting framework are discussed as part of the historic analysis. Implications from corporate practice are derived from previous empirical findings from the EU Commission's consultations.

The proposed change from non-financial to sustainability reporting within the EU affects more than simply the terminology used. It implies that a different understanding is needed of both the purposes of company reporting on sustainability matters and the aims of carrying out such reporting. This change was driven by the need and desire to appropriately interpret the principle of materiality set forth in the NFI Directive. However, the recent redefinition in the shift within the EU Commission's proposals presents considerable challenges–and costs–in practice.

Future research on the conceptualization and operationalization of ecological and social materiality, as well as on the use of this information by different stakeholder groups, is necessary in order to (a) help companies that are applying the reporting requirements in practice, (b) support the increased harmonization of the reports published by these companies and (c) fully assess the costs and benefits associated with the increase in reporting requirements for these companies.

Companies have to establish relevant reporting processes, systems and formats to fulfil the increasing number of reporting requirements.

This paper outlines the historic development of the principle of materiality regarding mandatory non-financial or sustainability reporting within the EU. It outlines a shift in rationales and political priorities as well as in implications for European companies that need to fulfil the reporting requirements. In consequence, it describes appropriate interpretations of this principle of materiality under current and upcoming legislation, enabling users to apply this principle more effectively.

Sex and gender are regarded as critical structural determinants of mental health and mental illness. Mental illness is a complex phenomenon, and risky behaviour and substance use commonly occur simultaneously or subsequent to one another. A gendered vulnerability in biological, environmental, and behavioural risk factors has been registered in the development and escalation of mental illness. Studies have found that women who use drugs experience greater physical and mental health repercussions than men. Women who use drugs present higher rates of depression and anxiety, suicidal tendencies, isolation and general psychological distress. This chapter addresses the most common mental illnesses associated with women who use drugs: depression, anxiety, trauma-related disorders, and eating disorders.

Trade and environment are essential issues closely related to the development of the national economy and the improvement of people’s livelihood in the new era. The Report to the 19th National Congress of the Communist Party of China (CPC) listed the construction of a strong trading power as an important part of building a modern economic system and pollution prevention and treatment as one of the three key battles to win the decisive victory of building a moderately prosperous society in all respects. However, the relationship between trade and environmental pollution is still very controversial in the existing literature, and there is a paucity of literature on the relationship between trade and environmental pollution based on micro data.

This paper merged China’s Firm-Level Pollution Database with China’s Industrial Enterprise Database and China’s industry tariff rates. Additionally, by virtue of the quasi-natural experiment of China’s accession to the World Trade Organization (WTO), a difference in difference (DID) model was constructed to alleviate the endogeneity issue.

According to the results, the trade barrier decrease (trade liberalization) significantly reduces the intensity of SO₂ emissions, a major pollutant of enterprises, as the intensity of SO₂ emissions decreased 2.16% for each unit decrease of the trade barrier. The analysis of the mechanisms shows that the SO₂ emission intensity of enterprises is mainly due to the decrease of enterprises’ pollution emission rather than the decrease of output, and the decrease of enterprises’ pollution emission is mainly caused by the enterprises’ cleaner production process rather than the end treatment of pollution emission. The decrease of coal use intensity is an important mechanism of the decrease of SO₂ emission intensity caused by the decrease of trade barriers. Among the technical effects of the change of the trade barrier affecting enterprises’ pollution emission, biased technical change rather than neutral technical change dominates.

The findings of this paper imply that expanding openness can enhance China’s social welfare not only through the economic growth mechanisms identified in the classical literature, but also through environmental improvements. This provides useful policy insights for promoting the construction of a strong trading power and winning the battle against pollution in the new era.

Changes in food retailing (globalization, concentration) have negative impacts on smaller, “traditional” food retail businesses. Their market share decreasing year by year. The purpose of this study is to examine and compare the financial performances of these businesses under the given circumstances and current economic environment in a Hungarian and a Romanian county.

The study is based on two complete databases, including all companies that behoove retail food activity (considering the NACE cod) in the counties of Hajdu-Bihar (Hungary) and Cluj (Romania). The database analyzed contains the financial statements for five consecutive years for 212 and 690 businesses. Databases were examined by the most typical financial indicators using the multivariate and univariate analysis of variance and the k-medoid cluster analysis methods.

The results of the analysis have shown that there are differences in the number of retail food companies in the case of two counties, both in number and in financial performance. Companies in Hajdú-Bihar county perform better in terms of financial ratios than those in Cluj county. The groups created by k-medoids cluster analysis are relatively well distinguished in the case of Hajdú-Bihar county, while the picture is much more mixed in the case of Kolozs county. However, it is also important to note that the companies analyzed should generally perform better to survive.

Among the limitations of the study, it is important to note that the findings are relevant only to the two counties examined. Another limiting factor is that quite several companies had to be excluded from the analysis due to missing data or outliers.

The study presents for the corporate decision-makers the current performance of the companies of the sector examined in the two counties. The results of the study highlight the business areas of concern in management. The findings show that they need to change this performance to strengthen their market position. We believe that it is not enough to complain about the expansion of the supermarket chains, but they should take appropriate actions to improve their situation. Based on the results of the study, it can be concluded that there is a need to improve the financial efficiency of retail food companies in both counties to survive in the long run. This improvement is essential because retailers can play an important role in smaller settlements and narrower residential environments.

Comparative analysis of retail food companies in similar counties in these two neighboring countries has not been conducted using complex financial analysis. The study revealed the common and/or individual characteristics of these companies.

The purpose of this paper is to identify the components of logistics value and examine their influence on customer satisfaction in e-commerce. This study investigates the moderation effect between those two variables using the overall service level in the different industries of e-commerce.

A total of 592 correctly filled questionnaires from telephone and web interviews (computer-assisted telephone interviews and computer-assisted web interviews) were scrutinized. Hierarchical linear modeling (as a part of a wider group of multilevel modeling studies) was used to verify the dependencies between variables from an organization and industry levels.

The logistics factors indicated and described in the paper differently affect the value for the customer. This value is subjective and dynamic. For this reason, the online seller should develop a system to create a sustainable value proposition. It is plausible due to the possibility of choosing the type of delivery, date of collection and change thereof, as well as that of returning the product. Because of all this, the customer decides on the way of the order execution and creates the value chain.

The developed model is aimed at identifying universal relationships that create the customer satisfaction mechanism for the logistics value. However, this may result in other aspects of customer satisfaction being neglected. The authors are aware that the creation of value by a company in e-commerce must be approached in a systematic manner.

The results obtained and the representativeness of the surveyed sample of companies lead to the formulation of implications for business practice. The conclusions of the research definitely indicate a need to build awareness of logistics value and its influence on customer satisfaction through the service level in the industry. Because of the identified components of the logistics value and industry characteristics, managers of online retailers can better run their businesses, increase customer satisfaction, and thus improve their performance.

It is the first study that concerns e-commerce in individual industries, with particular emphasis on logistics and its impact on customer satisfaction.

This paper aims to historicise the contemporary chlorophyll trend through the first academic study of its early marketing in Sweden (1950–1953). Using multimodal critical discourse analysis, it demonstrates how brands used advertisements to convince female consumers of chlorophyll’s necessity to fulfil certain aspirational goals.

In all, 150 advertisements for chlorophyll products were collected from the Swedish Historical Newspaper Archive, as well as 600 additional advertisements for the three most popular products (toothpaste/mouthwash, sanitary towels and soap) from 1940 to 1950 and from 1954 to 1964. Then, multimodal critical discourse analysis was used to investigate how the products were marketed before, during and after the chlorophyll trend, identifying the general themes and linguistic/semiotic structures of the advertisements.

This paper shows how the commercial use of chlorophyll offered a lucrative opportunity for marketers, acting as a “tabula rasa” on which they could use discourses of science, nature, idealised femininity and luxury to draw connections with health, modernity and beauty, despite the product having no real purpose or value.

Viewing this fad from a historical perspective emphasises how brands, marketers and influencers continue to capitalise on the anxieties of female consumers with promises around beauty, hygiene and health. It, thus, offers us critical distance to reflect on contemporary claims about chlorophyll’s health benefits to make informed choices.

The purpose of this paper is to analyze the business models that 3D printer manufacturers apply to commercialize their technologies. The authors investigate these business models and analyze whether there are business model patterns. The paper describes the gestalt of the business model patterns and discusses differences and similarities.

The authors review the literatures on business models and 3D printing technology. The authors apply a componential business model approach and carry out an in-depth analysis of the business models of 48 3D printer manufacturers in Europe and North America. The authors develop a framework focusing on value proposition, value creation and value capture components. Cluster analysis is used to identify business model patterns.

The results indicate that there are two distinct business model patterns in the industry. The authors termed these patterns the “low-cost online business model” and the “technology expert business model.” The results demonstrate that there is a relationship between business model and technology. The identified patterns are independent of age, company size and country of origin.

The empirical results complement and extend existing literature on business models. The authors contribute to the discussion on business models in the context of novel technology. The technology seems to influence the gestalt of the business model. The sample is limited to European and North American companies and the analysis is based on secondary data.

This is the first empirical study on the business models of 3D printer manufacturers. The authors apply an original mixed-methods approach and develop a framework that can function as a starting point for future research. 3D printer manufacturers can use the identified business model patterns as blueprints to reduce the risk of failure or as a starting point for business model innovation.