Search results

The effects of carbon fiber reinforced polymer (CFRP) reinforcement form, adhesive type and pre-crack width on failure mode, shear capacity, deflection response, CFRP strain response and crack patterns of strengthened specimens were investigated.

This paper presents a geopolymer adhesive that matches the performance requirements of CFRP adhesive, which is applied to pre-cracked beams reinforced with CFRP strips.

For specimens with varying structural properties, two failure modes, the CFRP-concrete interface substrate failure and the fracture failure of CFRP, are observed. Moreover, the shear capacity, ultimate deflection and bending stiffness of the U-shaped CFRP-strengthened beams are enhanced in comparison to the complete-wrapping CFRP-strengthened beams. With an increase in pre-crack width, the increase in shear capacity of RC beams shear-strengthened with CFRP strips is less than that of non-cracked beams, resulting in a limited influence on the stiffness of CFRP-strengthened beams. The comparison of experimental results showed that the proposed finite element model (FEM) effectively evaluated the mechanical characteristics of CFRP-strengthened RC beams.

Taking into consideration the reinforcement effect and the concept of environmental protection, the geopolymer adhesive reinforcement scheme is preferable to applying epoxy resin to the CFRP-strengthened RC beams.

Advanced fibre-reinforced polymer (FRP) composites have been increasingly used over the past two decades for strengthening, upgrading and restoring degraded civil engineering infrastructure. Substantial experimental investigations have been conducted in recent years to understand the compressive behaviour of FRP-confined concrete columns. A considerable number of confinement models to predict the compressive behaviour of FRP-strengthened concrete columns have been developed from the results of these experimental investigations. The purpose of this paper is to present a comprehensive review of experimental investigations and theoretical models of circular and non-circular concrete columns confined with FRP reinforcement.

The paper reviews previous experimental test results on circular and non-circular concrete columns confined with FRP reinforcement under concentric and eccentric loading conditions and highlights the behaviour and mechanics of FRP confinement in these columns. The paper also reviews existing confinement models for concrete columns confined with FRP composites in both circular and non-circular sections.

This paper demonstrates that the performance and effectiveness of FRP confinement in concrete columns have been extensively investigated and proven effective in enhancing the structural performance and ductility of strengthened columns. The strength and ductility enhancement depend on the number of FRP layers, concrete compressive strength, corner radius for non-circular columns and intensity of load eccentricity for eccentrically loaded columns. The impact of existing theoretical models and directions for future research are also presented.

Potential researchers will gain insight into existing experimental and theoretical studies and future research directions.

This paper aims to analyze the performance of reinforced concrete (RC) beams strengthened in shear with carbon fiber-reinforced polymer (CFRP) sheets subjected to four-point bending.

ANSYS software is used to build six models. In addition, SOILD65, LINK180, SHELL181 and SOLID185 elements are used, respectively, to model concrete, steel reinforcement, polymer and steel plate support. A comparative study between the nonlinear finite element and analytical models, including the ACI 440.2 R-08 and FIB14 models as well as experimental data, is also carried out.

The comparative study of the nonlinear finite element results with analytical models shows that the difference between the predicted load capacity ranges from 4.44%–24.49% in the case of the ACI 440.2 R-08 model, while the difference for FIB14 code ranges from 2.69%–26.03%. It is clear that there is a good agreement between the nonlinear finite element analysis (NLFEA) results and the different expected CFRP codes.

This model can be used to explore the behavior and predict the RC beams strengthened in shear with different CFRP properties. They could be used as a numerical platform in contrast to expensive and time-consuming experimental tests.

On the basis of the results, a good match is found between the model results and the experimental data at all stages of loading the tested samples. Load capacities as well as load deflection curves are also presented. It is concluded that the differences between the loads at failure ranged from 0.09%–6.16% and 0.56%–4.98%, comparing with experimental study. In addition, the increase in compressive strength produces an increase in the ultimate load capacity of the beam. The difference in the ultimate load capacity was less than 30% when compared with the American Concrete Institute and FIB14 codes.

In this paper, to obtain shear and bending performance of carbon fiber-reinforced polymer (CFRP)-strengthened beams bonded by geopolymers, the effects of impregnated adhesive types, strengthened scheme, CFRP layer and pre-cracked width are investigated, and the performance of CFRP-strengthened beams is validated by the establishment of Finite Element Models (FEMs).

In this paper, static loading test and finite element analysis of epoxy-CFRP-strengthened (ECS) and geopolymer-CFRP-strengthened (GCS) were carried out, and the bearing capacity and stiffness were compared, the results show that GCS reinforced concrete (RC) beam is feasible and effective.

The bearing capacity, crack distribution and development, load–deflection curves of GCS RC beams with different pre-crack widths were investigated. The reinforcement effect of geopolymer achieves the same as epoxy, effectively improving the ultimate bearing capacity of the beam, with a maximum increase rate of 28.9%. The failure mode of CFRP is broken in the yield failure stage of GCS RC beam with reasonable strengthening form, and the utilization rate of CFRP is improved. CFRP-strengthened layers, pre-cracked widths significantly affect the mechanical properties, and deformation properties of the strengthened beams.

Compared with ECS RC beams, the bearing capacity and stiffness of GCS RC beams are similar to or even better, indicating that GCS RC beam is feasible and effective. It is a new method for CFRP-strengthened beams, which not only conforms to the concept of national ecological civilization construction, but also provides an economical, environmentally friendly and excellent performance solution for structural reinforcement.

Building elements that are damaged by fire are often strengthened by fiber wrapping techniques. Self-compacting concrete (SCC) is an advanced building material that is widely used in construction due to its ability to flow and pass through congested reinforcement and fill the required areas easily without compaction. The aim of the research work is to examine the flexural behavior of SCC subjected to elevated temperature. This research work examines the effect of natural air cooling (AC) and water cooling (WC) on flexural behavior of M20, M30, M40 and M50 grade fire-affected retro-fitted SCC. The results of the investigation will enable the designers to choose the appropriate repair technique for improving the service life of structures.

In this study, an attempt has been made to evaluate the flexural behavior of fire exposed reinforced SCC beams retrofitted with laminates of carbon fiber reinforced polymer (CFRP), basalt fiber reinforced polymer (BFRP) and glass fiber reinforced polymer (GFRP). Beam specimens were cast with M20, M30, M40 and M50 grades of SCC and heated to 925ºC using an electrical furnace for 60 min duration following ISO 834 standard fire curve. The heated SCC beams were cooled by either natural air or water spraying.

The reduction in the ultimate load carrying capacity of heated beams was about 42% and 55% for M50 grade specimens that were cooled by air and water, respectively, in comparison with the reference specimens. The increase in the ultimate load was 54%, 38% and 27% for the specimens retrofitted with CFRP, BFRP and GFRP, respectively, compared with the fire-affected specimens cooled by natural air. Water-cooled specimens had shown higher level of damage than the air-cooled specimens. The specimens wrapped with carbon fiber could able to improve the flexural strength than basalt and glass fiber wrapping.

SCC, being a high performance concrete, is essential to evaluate the performance under fire conditions. This research work provides the flexural behavior and physical characteristics of SCC subjected to elevated temperature as per ISO rate of heating. In addition attempt has been made to enhance the flexural strength of fire-exposed SCC with wrapping using different fibers. The experimental data will enable the engineers to choose the appropriate material for retrofitting.

The effects of failure mode and strain conditions of CFRP, concrete and stirrups on the shear capacity of reinforced beams bonded by geopolymer and epoxy are studied. In addition, a prediction model of the ultimate bearing capacity of CFRP-shear-strengthened beams is proposed, which considers adhesive performance parameters adhesive performance parameter ßE and FRP width parameter ßw.

This paper presents an experimental study on ultimate bearing capacity of CFRP-shear-strengthened pre-cracked beams with geopolymer and epoxy resin, which considers parameters such as impregnated adhesives types and CFRP-strengthened scheme.

The failure modes of CFRP-strengthened beams bonded by geopolymer are the combination of the CFRP-concrete interface substrate failure and fracture failure of CFRP, and that of epoxy is the local substrate failures with small area. The ultimate load of CFRP-strengthened beams is directly affected by the failure modes. The ultimate bearing capacity of CFRP-strengthened beams with geopolymer is 91.4% of that of epoxy resin. Compared with ultimate bearing capacity of CFRP-strengthened beams with U-shaped, that of complete-wrapping increases by 2.5%. Moreover, the stirrup peak strain is reduced by more than 30% in CFRP-strengthened beams bonded with geopolymer and epoxy resin in comparison with the unstrengthened beam. The existing prediction model cannot accurately predict the CFRP shear capacity contribution of strengthened beams with different CFRP-strengthened schemes and adhesive properties. The estimated results are much lower than the test data, and the deviation is much larger than 20%.

Geopolymer alternative to epoxy as an adhesive is feasible and effective for CFRP reinforcement. Furthermore, the accuracy is improved by introducing parameters about adhesive properties based on the existing prediction model. The estimated results are in excellent agreement with the test data, and the deviation is controlled within −12.80%, and the model is suitable for predicting the shear capacity of FRP-strengthened beams with ßf = 90° in shear capacity database.

Covering a fiber-reinforced concrete column (fiber reinforced plastic (FRP)) improves the performance of the column primarily. The purpose of this paper is to investigate the behavior of small FRP concrete columns that are subject to axial pressure loading, in order to study the effect of many parameters on the effectiveness of FRP couplings on circular and square concrete columns.

These parameters include the shape of the browser (circular and square), whole core and cavity, square radius of square columns, concrete strength (low strength, normal and high), type of FRP (carbon and glass) and number of FRP (1–3) layers. The effective fibrillation failure strain was investigated and the effect of effective lateral occlusion pressure.

The results of the test showed that the FRP-coated columns improved significantly the final conditions of both the circular and square samples compared to the unrestricted columns; however, improvement of square samples was not as prominent as improvement in circular samples. The results indicated that many parameters significantly affected the behavior of FRP-confined columns. A new model for predicting compressive force and the corresponding strain of FRP is presented. A good relationship is obtained between the proposed equations and the current experimental results.

The average hoop strain in FRP wraps at rupture in FRP-confined concrete specimens can be much lower than that given by tensile coupon tests, meaning the theoretical assumption that the FRP-confined concrete cylinder ruptures when the FRP material tensile strength attained at its maximum is not suitable. Based on this observation, the effective peak strength and corresponding strain formula for FRP concrete confined columns must be based on the effective hoop rupture strain composite materials.

Presents an overview and discusses the applications of fibre reinforced polymer (FRP) sheets and plates in the strengthening of concrete structures. An insight may be obtained from the discussions made to enhance the use of these techniques for productive use. In addition, selected case studies have been furnished where FRP materials have been used for repairing/retrofitting, emphasizing the application of different types of FRP materials in strengthening concrete structures. Concludes that the use of FRP material is rapidly gaining pace and replacing the traditional steel or metal based materials due to its enhanced properties and cost effectiveness.

This paper presents an experimental investigation on the effect of indirect fire on axially loaded CFRP retrofitted columns. Tests were performed on 28 half scale CFRP retrofitted columns, coated with proposed heat insulating covers (two specimens were cast for each type). Twelve materials - known for their low coefficients of thermal conductivities- were used in the mixes of these protective covers on CFRP. Commercially available fire protective material was subjected to the same tests also. All protected columns were exposed to elevated temperature tests following ASTM (E119-95a) fire test curve 900°C for half an hour, while an axial load is applied to simulate working load conditions.

Thermal distribution results along columns cross sections- for different insulating covers- at different stages of the fire test- were compared to evaluate the efficiency of the proposed heat protecting mixes.

Post fire tests, all columns were loaded up to failure. Hence, the reduction in their load capacity due to fire exposure is calculated.

Throughout these comparisons, it is concluded that the most of the suggested insulating mixes acted efficiently to protect CFRP strengthened sections during fire. Temperature was significantly reduced at CFRP level -below the protective covers. It ranged between 100-120°C, for most of the mixes. Thus, enhancing significantly the fire resistance for CFRP retrofitted columns. Reduction in failure load capacity -due to fire exposure- was limited to 10-20% for most of the protected specimens. Even for the insulating mixes that resulted in lowest - post fire- residual strength, CFRP layer was highly damaged, but the reinforced concrete section was slightly affected, which still makes the damage repairable.

When Boeing was finalising the design of the 747, which first flew in early 1969, discussions began in Europe to consider the design and construction of a short/medium range large capacity European airliner.