Search results

Higher energy conversion efficiency of internal combustion engine can be achieved with optimal control of unsteady in-cylinder flow fields inside a direct-injection (DI) engine. However, it remains a daunting task to predict the nonlinear and transient in-cylinder flow motion because they are highly complex which change both in space and time. Recently, machine learning methods have demonstrated great promises to infer relatively simple temporal flow field development. This paper aims to feature a physics-guided machine learning approach to realize high accuracy and generalization prediction for complex swirl-induced flow field motions.

To achieve high-fidelity time-series prediction of unsteady engine flow fields, this work features an automated machine learning framework with the following objectives: (1) The spatiotemporal physical constraint of the flow field structure is transferred to machine learning structure. (2) The ML inputs and targets are efficiently designed that ensure high model convergence with limited sets of experiments. (3) The prediction results are optimized by ensemble learning mechanism within the automated machine learning framework.

The proposed data-driven framework is proven effective in different time periods and different extent of unsteadiness of the flow dynamics, and the predicted flow fields are highly similar to the target field under various complex flow patterns. Among the described framework designs, the utilization of spatial flow field structure is the featured improvement to the time-series flow field prediction process.

The proposed flow field prediction framework could be generalized to different crank angle periods, cycles and swirl ratio conditions, which could greatly promote real-time flow control and reduce experiments on in-cylinder flow field measurement and diagnostics.

Diagnosing brain tumors is a process that demands a significant amount of time and is heavily dependent on the proficiency and accumulated knowledge of radiologists. Over the traditional methods, deep learning approaches have gained popularity in automating the diagnosis of brain tumors, offering the potential for more accurate and efficient results. Notably, attention-based models have emerged as an advanced, dynamically refining and amplifying model feature to further elevate diagnostic capabilities. However, the specific impact of using channel, spatial or combined attention methods of the convolutional block attention module (CBAM) for brain tumor classification has not been fully investigated.

To selectively emphasize relevant features while suppressing noise, ResNet50 coupled with the CBAM (ResNet50-CBAM) was used for the classification of brain tumors in this research.

The ResNet50-CBAM outperformed existing deep learning classification methods like convolutional neural network (CNN), ResNet-CBAM achieved a superior performance of 99.43%, 99.01%, 98.7% and 99.25% in accuracy, recall, precision and AUC, respectively, when compared to the existing classification methods using the same dataset.

Since ResNet-CBAM fusion can capture the spatial context while enhancing feature representation, it can be integrated into the brain classification software platforms for physicians toward enhanced clinical decision-making and improved brain tumor classification.

This research has not been published anywhere else.

The main issue in the mass customization of apparel products is how to efficiently produce products of various sizes. A parametric pattern-making system is one of the notable ways to rectify this issue, but there is a lack of information on the parametric design itself and its application to the apparel industry. This study compares and analyzes three types of parametric clothing pattern CAD (P-CAD) software currently in use to identify the characteristics of each, and suggest a basic guideline for efficient and adaptable P-CAD software in the apparel industry.

This study compared three different types of P-CAD software with different characteristics: SuperALPHA: PLUS(as known as YUKA), GRAFIS and Seamly2D. The authors analyzed the types and management methodologies of each software, according to the three essential components that refer to previous studies about parametric design systems: entities, constraints and parameters.

The results demonstrated the advantages and disadvantages of methodology in terms of three essential components of each software. Based on the results, the authors proposed five strategies for P-CAD development that can be applied to the mass customization of clothing.

This study is meaningful in that it consolidates and organizes information about P-CAD software that has previously been scattered. The framework used in this study has an academic value suggesting guidelines to analyze P-CAD systems.

Industry 4.0 is exacerbating the need for offsite construction (OSC) adoption, and this rapid transformation is pushing the boundaries of construction skills towards extensive modernisation. The adoption of this modern production strategy by the construction industry would redefine the position of OSC. This study aims to examine whether the existing skills are capable of satisfying the needs of different OSC types.

A critical literature review evaluated the impact of transformative technology on OSC skills. An existing industry standard OSC skill classification was used as the basis to develop a master list that recognises emerging and diminishing OSC skills. The master list recognises 67 OSC skills under six skill categories: managers, professionals, technicians and trade workers, clerical and administrative workers, machinery operators and drivers and labourers. The skills data was extracted from a series of 13 case studies using document reviews and semi-structured interviews with project stakeholders.

The multiple case study evaluation recognised 13 redundant skills and 16 emerging OSC skills such as architects with building information modelling and design for manufacture and assembly knowledge, architects specialised in design and logistics integration, advanced OSC technical skills, factory operators, OSC estimators, technicians for three dimensional visualisation and computer numeric control operators. Interview findings assessed the current state and future directions for OSC skills development. Findings indicate that the prevailing skills are not adequate to readily relocate construction activities from onsite to offsite.

To the best of the authors’ knowledge, this research is one of the first studies that recognises the major differences in skill requirements for non-volumetric and volumetric OSC types.

Monitoring of the quality of precast concrete (PC) components is crucial for the success of prefabricated construction projects. Currently, quality monitoring of PC components during the construction phase is predominantly done manually, resulting in low efficiency and hindering the progress of intelligent construction. This paper presents an intelligent inspection method for assessing the appearance quality of PC components, utilizing an enhanced you look only once (YOLO) model and multi-source data. The aim of this research is to achieve automated management of the appearance quality of precast components in the prefabricated construction process through digital means.

The paper begins by establishing an improved YOLO model and an image dataset for evaluating appearance quality. Through object detection in the images, a preliminary and efficient assessment of the precast components' appearance quality is achieved. Moreover, the detection results are mapped onto the point cloud for high-precision quality inspection. In the case of precast components with quality defects, precise quality inspection is conducted by combining the three-dimensional model data obtained from forward design conversion with the captured point cloud data through registration. Additionally, the paper proposes a framework for an automated inspection platform dedicated to assessing appearance quality in prefabricated buildings, encompassing the platform's hardware network.

The improved YOLO model achieved a best mean average precision of 85.02% on the VOC2007 dataset, surpassing the performance of most similar models. After targeted training, the model exhibits excellent recognition capabilities for the four common appearance quality defects. When mapped onto the point cloud, the accuracy of quality inspection based on point cloud data and forward design is within 0.1 mm. The appearance quality inspection platform enables feedback and optimization of quality issues.

The proposed method in this study enables high-precision, visualized and automated detection of the appearance quality of PC components. It effectively meets the demand for quality inspection of precast components on construction sites of prefabricated buildings, providing technological support for the development of intelligent construction. The design of the appearance quality inspection platform's logic and framework facilitates the integration of the method, laying the foundation for efficient quality management in the future.

This study has mainly aimed to compare and contrast two completely different image processing algorithms that are very adaptive for detecting prostate cancer using wearable Internet of Things (IoT) devices. Cancer in these modern times is still considered as one of the most dreaded disease, which is continuously pestering the mankind over a past few decades. According to Indian Council of Medical Research, India alone registers about 11.5 lakh cancer related cases every year and closely up to 8 lakh people die with cancer related issues each year. Earlier the incidence of prostate cancer was commonly seen in men aged above 60 years, but a recent study has revealed that this type of cancer has been on rise even in men between the age groups of 35 and 60 years as well. These findings make it even more necessary to prioritize the research on diagnosing the prostate cancer at an early stage, so that the patients can be cured and can lead a normal life.

The research focuses on two types of feature extraction algorithms, namely, scale invariant feature transform (SIFT) and gray level co-occurrence matrix (GLCM) that are commonly used in medical image processing, in an attempt to discover and improve the gap present in the potential detection of prostate cancer in medical IoT. Later the results obtained by these two strategies are classified separately using a machine learning based classification model called multi-class support vector machine (SVM). Owing to the advantage of better tissue discrimination and contrast resolution, magnetic resonance imaging images have been considered for this study. The classification results obtained for both the SIFT as well as GLCM methods are then compared to check, which feature extraction strategy provides the most accurate results for diagnosing the prostate cancer.

The potential of both the models has been evaluated in terms of three aspects, namely, accuracy, sensitivity and specificity. Each model’s result was checked against diversified ranges of training and test data set. It was found that the SIFT-multiclass SVM model achieved a highest performance rate of 99.9451% accuracy, 100% sensitivity and 99% specificity at 40:60 ratio of the training and testing data set.

The SIFT-multi SVM versus GLCM-multi SVM based comparison has been introduced for the first time to perceive the best model to be used for the accurate diagnosis of prostate cancer. The performance of the classification for each of the feature extraction strategies is enumerated in terms of accuracy, sensitivity and specificity.

Pervasive analytics act as a prominent role in computer-aided prediction of non-communicating diseases. In the early stage, arrhythmia diagnosis detection helps prevent the cause of death suddenly owing to heart failure or heart stroke. The arrhythmia scope can be identified by electrocardiogram (ECG) report.

The ECG report has been used extensively by several clinical experts. However, diagnosis accuracy has been dependent on clinical experience. For the prediction methods of computer-aided heart disease, both accuracy and sensitivity metrics play a remarkable part. Hence, the existing research contributions have optimized the machine-learning approaches to have a great significance in computer-aided methods, which perform predictive analysis of arrhythmia detection.

In reference to this, this paper determined a regression heuristics by tridimensional optimum features of ECG reports to perform pervasive analytics for computer-aided arrhythmia prediction. The intent of these reports is arrhythmia detection. From an empirical outcome, it has been envisioned that the project model of this contribution is more optimal and added a more advantage when compared to existing or contemporary approaches.

In reference to this, this paper determined a regression heuristics by tridimensional optimum features of ECG reports to perform pervasive analytics for computer-aided arrhythmia prediction. The intent of these reports is arrhythmia detection. From an empirical outcome, it has been envisioned that the project model of this contribution is more optimal and added a more advantage when compared to existing or contemporary approaches.

This paper aims to provide a literature review on the cloud-based platforms for the education sectors. The several aspects of cloud computing adoption in education, remote/distance learning and the application of cloud-based design and manufacturing (CBDM) have been studied and theorised.

A four-step methodology was adopted to analyse and categorise the papers obtained through various search engines. Out of 429 research articles, 72 papers were shortlisted for the detailed analysis.

Many factors that influence cloud computing technology adoption in the education sector have been identified in this paper. The research findings on several research items have been tabulated and discussed. Based on the theoretical research done on cloud computing for education, cloud computing for remote/distance learning and CBDM, cloud computing could enhance the educational systems in mainly developing countries and improve the scope for remote/distance learning.

This study is limited to papers published only in the past decade from 2011 to 2020. Besides, this review was unable to include journal articles published in different languages. Nevertheless, for the effective teaching and learning process, this paper could help understand the importance and improve the process of adopting cloud computing concepts in educational universities and platforms.

This study is a novel one as a research review constituting cloud computing applications in education and extended for remote/distance learning and CBDM, which have not been studied in the existing knowledge base.

Feature extraction from 3D datasets is a current problem. Machine learning is an important tool for classification of complex 3D datasets. Machine learning classification techniques are widely used in various fields, such as text classification, pattern recognition, medical disease analysis, etc. The aim of this study is to apply the most popular classification and regression methods to determine the best classification and regression method based on the geodesics.

The feature vector is determined by the unit normal vector and the unit principal vector at each point of the 3D surface along with the point coordinates themselves. Moreover, different examples are compared according to the classification methods in terms of accuracy and the regression algorithms in terms of R-squared value.

Several surface examples are analyzed for the feature vector using classification (31 methods) and regression (23 methods) machine learning algorithms. In addition, two ensemble methods XGBoost and LightGBM are used for classification and regression. Also, the scores for each surface example are compared.

To the best of the author’s knowledge, this is the first study to analyze datasets based on geodesics using machine learning algorithms for classification and regression.

This study aims to discuss the state-of-the-art digital factory (DF) development combining digital twins (DTs), sensing devices, laser additive manufacturing (LAM) and subtractive manufacturing (SM) processes. The current shortcomings and outlook of the DF also have been highlighted. A DF is a state-of-the-art manufacturing facility that uses innovative technologies, including automation, artificial intelligence (AI), the Internet of Things, additive manufacturing (AM), SM, hybrid manufacturing (HM), sensors for real-time feedback and control, and a DT, to streamline and improve manufacturing operations.

This study presents a novel perspective on DF development using laser-based AM, SM, sensors and DTs. Recent developments in laser-based AM, SM, sensors and DTs have been compiled. This study has been developed using systematic reviews and meta-analyses (PRISMA) guidelines, discussing literature on the DTs for laser-based AM, particularly laser powder bed fusion and direct energy deposition, in-situ monitoring and control equipment, SM and HM. The principal goal of this study is to highlight the aspects of DF and its development using existing techniques.

A comprehensive literature review finds a substantial lack of complete techniques that incorporate cyber-physical systems, advanced data analytics, AI, standardized interoperability, human–machine cooperation and scalable adaptability. The suggested DF effectively fills this void by integrating cyber-physical system components, including DT, AM, SM and sensors into the manufacturing process. Using sophisticated data analytics and AI algorithms, the DF facilitates real-time data analysis, predictive maintenance, quality control and optimal resource allocation. In addition, the suggested DF ensures interoperability between diverse devices and systems by emphasizing standardized communication protocols and interfaces. The modular and adaptable architecture of the DF enables scalability and adaptation, allowing for rapid reaction to market conditions.

Based on the need of DF, this review presents a comprehensive approach to DF development using DTs, sensing devices, LAM and SM processes and provides current progress in this domain.