Search results

This paper aims to investigate the reciprocal nonlinear relationship between corporate social responsibility (CSR) and firm performance (FP).

The authors used a sample of 814 European firms over the period 2008–2017. The Panel Smooth Transition Regression (PSTR) model was performed as an econometric approach.

Firstly, results show a threshold effect in the CSR–FP relationships within the two directions. More specifically, the authors found that firms are more likely to engage in CSR by surpassing a threshold of 1.231% for return on assets (ROA) and 0.821% for Tobin’s Q ratio. Secondly, the authors also found that the impact of CSR on FP is positive and significant only if the environment, social and governance score surpasses the threshold of 56.780% when the dependent variable is ROA and 41.02% when Tobin’s Q ratio measures performance.

A significant part of the literature supports the linear relationship between CSR and FP from the unique direction (CSR → FP). This study comes to fill this gap by assessing the possible nonlinear relationship. In addition, this nonlinear relationship is tested under the two directions. Therefore, defining the threshold of FP that allows companies to engage in CSR, on the one hand, and the threshold of engagement in CSR that improves FP, on the other hand, could be an exciting topic.

To get the full benefit from CSR effects, firms should be with better financial performance to be socially responsible.

To the best of our knowledge, few studies have explored the nonlinear relationship between CSR and FP. In addition, this study raises the question of whether this relation is causal. The authors assess the two nonlinear relationships between CSR ? FP and FP ? CSR by determining the optimal thresholds.

本文旨在探究企業社會責任 (以下簡稱企社責) 與公司業績之間的相互非線 性關係。

研究所採用的樣本為814間歐洲公司, 涵蓋期為2008年至2017年。研究人 員使用縱橫平滑轉換模型、作為經濟計量方法和工具去進行研究。

研究結果顯示、在有關的兩個方向內, 企社責與公司業績之間的關聯上是 存在著閾值效應的。更具體地說, 研究人員發現, 若企業的資產報酬率超過1.231%的 水平, 以及托賓的Q比率 (Tobin’s Q Ratio) 0.821%的水平的話, 它們會更願意承擔企 社責。其次, 研究結果亦顯示, 企社責對企業的業績會產生積極的影響; 另外, 只有 當資產報酬率是因變數、而環境、社會和公司治理的分數 (ESGS) 超過56.780%, 以 及當托賓的Q比率用來測量績效、而數值為41.02%時, 企社責對企業的業績所產生的 影響會較為顯著。

過去的學術文獻、大部份都是以唯一的方向 (企社責 ->公司業績) 去確認 企社責與企業業績之間的線性關係。本研究評估了兩者之間可能存在的非線性關係; 而且, 這非線性關係是在有關的兩個方向下而進行測試的; 因此, 本研究一方面給可 讓公司以企社責的精神和理念去營運的企業業績的閾值下了定義; 另一方面, 又給參 與企社責為公司帶來業績的改善的閾值下了定義。這均為令人興奮的課題。

企業若想取得因參與企社責而帶來的完全好處, 它們必須擁有更佳 的財務績效、以能盡其社會責任。

盡我們所知, 探究企社責與企業業績之間的非線性關係的研究實在不 多; 而且, 本研究對這兩者的關係是否是因果關係提出了質疑; 就此, 我們藉著釐定 最佳的相對閾值、來評估企社責 ->企業業績與企業業績 ->企社責之間的兩個非線性的 關係。

This study aims to explore the challenges faced by the tourism and hospitality industry following the COVID-19 pandemic and to propose effective strategies for recovery and resilience of this sector.

The study analysed the challenges encountered by the tourism and hospitality industry post-pandemic and identified key strategies for overcoming these challenges. The study utilised the modified Delphi method to finalise the challenges and employed the Best-Worst Method (BWM) to rank these challenges. Additionally, solution strategies are ranked using the Criteria Importance Through Intercriteria Correlation (CRITIC) method.

The study identified significant challenges faced by the tourism and hospitality industry, highlighting the lack of health and hygiene facilities as the foremost concern, followed by increased operational costs. Moreover, it revealed that attracting millennial travellers emerged as the top priority strategy to mitigate the impact of COVID-19 on this industry.

This research contributes to understanding the challenges faced by the tourism and hospitality industry in the wake of the COVID-19 pandemic. It offers valuable insights into practical strategies for recovery. The findings provide beneficial recommendations for policymakers aiming to revive and support these industries.

The authors construct two time-varying political connection (PC) indexes to measure a firm's political tendencies toward ruling and opposing parties and analyze whether a firm with ruling party tendencies obtains better bank loan contracts compared to the contracts obtained by a firm with opposing party tendencies and a firm with fixed PC tendencies.

Linguistic text mining is used to construct the two time-varying PC indexes from news sources that reflect the tone and frequencies of characteristic texts to determine a firm's tendencies to favor the ruling or opposing parties.

The results show that varying PC firms connected to the ruling party receive preferential loan contracts when their political tendencies increase but varying PC firms connected to the opposition party do not. In contrast, fixed PC firms gain similar benefits only when the connection is determined in the presidential election year but not in other years. Firms supporting two parties receive minimal financial rewards in terms of loan terms.

In past studies, once a firm is identified as having a connection with a political party, it is assumed to have PC throughout the sample period (i.e. fixed PC firms). The authors lift this assumption and examine how varying PC affect bank loan contracts. The two time-varying PC indexes can identify a firm's more immediate party tendencies and more precise effects of a firm's party tendencies on bank loan contracts.

We explore the impact of equity liquidity on a firm’s dynamic leverage adjustments and the moderating impacts of leverage deviation and target instability on the link between equity liquidity and dynamic leverage in the UK market.

In applying the two-step system GMM, we estimate our model by exploring suitable instruments for the dynamic variable(s), i.e. lagged values of the dynamic term(s).

Our analyses document that a firm’s equity liquidity has a positive impact on the speed of adjustment (SOA) of its leverage ratio back to the target ratio in the UK market. We also demonstrate that the positive relationship between liquidity and SOA is more pronounced for firms whose current position is relatively close to their target leverage ratio and whose target ratio is relatively stable.

This study provides important implications for both firms’ managers and investors. Particularly, firms’ managers who wish to increase the leverage SOA to enhance firms’ value need to give great attention to their equity liquidity. Investors who want to evaluate firms’ performance could also consider their equity liquidity and leverage SOA.

We are the first to enrich the literature on leverage adjustments by identifying equity liquidity as a new determinant of SOA in a single developed country with many differences in the structure and development of capital markets, ownership concentration and institutional characteristics. We also provide new empirical evidence of the joint effect of equity liquidity, leverage deviation and target instability on leverage SOA.

Know your customer (KYC), accounting standards, issuance, clearing, and trade settlement became the major barrier to implement accounting, accountability and assurance process in supply chain finance (SCF). Blockchain technology features have the potential to solve accounting problems. This research focuses on exploring how blockchain technology provides solutions to overcome the barriers of accounting process in SCF. The benefits, opportunities, costs and risks related to blockchain adoption are also explored.

Multi-case study and qualitative methods are used with a framework based on blockchain role to overcome the accounting process barriers. Ten blockchain projects in SCF and 29 interviews of participants as a unit of analysis are considered.

The findings indicate that blockchain technology offers solutions to solve accounting, accountability and assurance problems in SCF. Validity, verification, smart contracts, automation and enduring data on trade transactions potentially solve those barriers. However, it is also necessary to consider costs such as implementation, technology, education and integration costs. Then there are possible risks such as regulatory compliance, operational, code development and scalability risk. This finding reflects the current status of blockchain technology roles in SCF.

This study unveils blockchain's SCF accounting potential, emphasizing multi-case method limitations and future research prospects. Diverse contexts challenge findings' applicability, warranting cross-industry studies for deeper insights. Addressing selection bias and integrating quantitative measures can enhance understanding of blockchain's accounting impact.

Accounting professionals can get an idea of the future direction and impact of blockchain technology on accounting, accountability and assurance processes.

This study provides initial findings on the potential, costs and risks of blockchain that is beneficial for parties involved in SCF, especially for banks and insurance underwriters. In addition, the findings also provide direction for the contribution of blockchain technology to accounting theory in the future.

Rapid innovation and developments in personal electronic technology have encouraged users to change users' devices more frequently than ever, which has resulted in creating a massive increase in the amount of electronic waste. The study focuses on identifying the barriers to closed-loop supply chain (CLSC) in the electronic industry.

A framework for analyzing the relationships among CLSC adoption barriers is designed. The authors adopted the decision-making trial and evaluation laboratory (DEMATEL) technique to determine the critical barriers of electronic CLSC from the opinion of experts in the field.

The outcome from the analysis suggests that cost barriers, financial barrier, process barriers and supplier-side barriers are the main causal factors that prevent the adoption and implementation of e-waste CLSC. The causal relationship indicates that financial barrier is the most influential factor, while phycological barrier is the most flexible barrier to the adoption of e-waste CLSC.

This study is restricted to CLSC adoption barriers in the electronic industry by evaluating 36 sub-barriers grouped into 8 main dimensions related to different members of the supply chain.

Closed-loop adoption barriers have been proposed to understand the crucial barriers to implementation of CLSC in the electronic industry. The cause-and-effect relationship indicates the critical factors to be improved to increase adoption of e-waste CLSC, helping managers and regulatory bodies to mitigate the problem areas.

This study contributes to the literature on CLSC by adopting a multi-criteria decision-making (MCDM) technique which captures the critical barriers of e-waste CLSC adoption in Indian scenario.

The aim of the present work is to develop a method to find the preventive measures for COVID-19 and their priorities. These preventive measures are prioritized according to the expert opinion.

An integrated method using the Kano model and Fuzzy-AHP is used to achieve the study objectives. First, the preventive measures are identified according to the expert. Next, the Kano model is used to determine the different Kano categories for remedial activities that are identified by the World Health Organization (WHO) and other medical authorities. Finally, Fuzzy-AHP is applied to determine the weights of these activities and assign the priorities according to their impact.

It is observed that the activity Avoid Travelling is the most important classification or category with the highest weight as compared to the other activities and sub-activities. It is also noticed that the category packed food items get the lowest weight and is the least important classification or category. In this work, two different approaches, designed for different purposes, provide similar results and verify each other.

Research contributing to the classification and prioritization of preventive activities using Kano and Fuzzy-AHP methods is not available. In the critical time of COVID-19, when governments are obliged to deal with many infected patients and a high number of deaths, one can focus on different preventive activities according to their classification, weights and ranks.

The construction industry contributes to economic development by providing physical equipment and infrastructures. However, it also generates some undesirable outputs such as waste and environmental pollution, especially in developing countries. Due to the importance of the green supply chain management (GSCM) philosophy, for solving these problems, the current study aims to evaluate the drivers of GSCM adoption in the construction industry of Iran.

This research uses a descriptive and practical methodology. The participated experts in the study include senior managers of the construction department in Rasht municipality who had relevant academic education and suitable experiences in urban and industrial construction. The experts took part in both qualitative and quantitative phases of the research, namely verification of the drivers extracted from literature and ranking them in ascending order. In the quantitative phase, Step-Wise Weight Assessment Ratio Analysis (SWARA) as a new multi-criterion decision-making (MCDM) method is used to evaluate the drivers of GSCM adoption using MATLAB software.

The results show that environmental management systems, green product design and innovational capability with weights of 0.347, 0.218 and 0.143 are the most significant sub-drivers, respectively. The less important factor is an investment in environmental technology.

This study evaluated the motivational factors of GSCM in the construction industry. The findings help governments, companies and green supply chain (GSC) managers to improve their knowledge about GSCM and make the best decisions to decrease environmental pollution.

In comparison to other industries, the construction industry is one of the most dangerous industries. Behavior-based safety (BBS) is a common and useful technique for risk indicator processing. Almost all studies are based on the BBS checklist, but very few of them focus on the increasing dangers faced by construction workers and the important factors that lead to accidents. This research represents a risk spatiotemporal analysis and visual tracking approach based on BBS and Building Information Modeling (BIM).

After the literature review, a BBS checklist was developed. Then a survey was conducted based on the BBS checklist and the temporal evolution of risks has been completed. After that, managing the risk with the automatic rule checking (ARC) system using BIM was conducted simultaneously to develop a framework by conducting a case study.

Based on the grey clustering analysis, this work provides a temporal evolution analysis approach for dynamic analyzing BBS risk. According to the grey relational analysis (GRA) data, the main key factor of risk was the missing guardrail/handrail system. After that, a case study was performed and the system automatically warn in the preconstruction phase that the barrier is missing as the system benefits.

A systematic framework has been provided for risk analysis through which high health and safety performance outcomes can be achieved on construction projects. This study will assist design engineers in addressing the potential danger to employees during the preconstruction stage and monitoring dynamic changes in risk on any construction site.

Lean manufacturing (LM) concepts have been widely adopted in diverse industrial sectors. However, no literature review focusing on case studies describing LM implementation is available. Case studies represent the actual implementation and provide secondary data for further analysis. This study aims to review the same to understand the pathways of LM implementation. In addition, it aims to analyse other related review questions, such as how implementing LM impacts manufacturing capabilities and the maturity level of manufacturing organisations that implemented LM, to name a few.

A literature review of case studies that discuss the implementation of LM during the last decade (from 2010 to 2020) is carried out. These studies were synthesised, and content analyses were performed to reveal critical insights.

The implementation pattern of LM significantly varies across manufacturing organisations. The findings show simultaneous improvement in manufacturing capabilities. Towards the end of the last decade, organisations implemented LM with radio frequency identification, e-kanban, simulation, etc.

Reviewing the case studies documenting LM implementation to comprehend the various nuances is a novel attempt. Furthermore, potential future research directions are identified for advancing the research in the domain of LM.