Search results
11 – 20 of 684Mark E. Heaton, Massimo Rogante, Adél Len and David Denieffe
The purpose of this paper is to determine the nano‐sized characteristics of SU‐8 polymer micro‐electromechanical systems airflow metrology turbines samples. These microturbines…
Abstract
Purpose
The purpose of this paper is to determine the nano‐sized characteristics of SU‐8 polymer micro‐electromechanical systems airflow metrology turbines samples. These microturbines were made to be the first using axial airflow for low air pressure response. This polymer may be affected during curing by UV and heat baking, as well as confined heat from laser ablation. Defects in the resin matrix may influence the material quality and hence the final turbine performance.
Design/methodology/approach
Small angle neutron scattering investigations were performed using the instrumentation of the Budapest Research Reactor.
Findings
The average sizes of the voids/cracks in the resin matrix of the turbines were determined and allowed the viability of making smaller even thinner rotor blades for higher spin and electrical output capability to be considered.
Originality/value
The obtained results have advanced the industrial applicability of the adopted technique in the considered sector of polymer analysis.
Nan Cao and Sai On Cheung
Voluntary participation (VP) has been identified as one of the characterizing features of mediation. This study aims to examine the value of VP in construction dispute mediation…
Abstract
Purpose
Voluntary participation (VP) has been identified as one of the characterizing features of mediation. This study aims to examine the value of VP in construction dispute mediation from two perspectives. Firstly, is VP a prerequisite of successful construction mediation. Secondly, does power asymmetry (PA) between the contracting parties marginalize the value of VP in fostering the use of mediation to resolve construction disputes.
Design/methodology/approach
Constructs of VP, PA and prerequisites of successful mediation were first developed. Principal component factor analysis was performed on data collected from the construction dispute resolution community to explore the underlying structure of the constructs. The relationships between the constructs were tested by structural equation modelling.
Findings
VP is found to be an important attribute of successful mediation. PA is also found to be inherent in construction contracting. This study identified three forms of PA: Resource, Information and Expectation. Moreover, this study found no conclusive empirical evidence to support that PA would marginalize the value of VP in fostering an attempt to construction dispute mediation. It is suggested that VP shall remain one of characterizing features of mediation.
Practical implications
The users, mediators and the judiciary should be aware of the importance of VP in mediation, irrespective of the use of mediation is contractual or court-encouraged. Although the presence of PA between the disputing parties, through participating voluntarily and ensuring the mediation process is flexible and fair, the chance of achieving a settlement would be enhanced.
Originality/value
VP has been viewed as one of the fundamentals of mediation. This study empirically supported this design concept. Furthermore, PA in construction contracting can be expressed as disparities in resource, information and expectation. Their existence presents no significant barrier to attempt of mediation. The flexible approach of mediation has been instrumental in overcoming the paradox between VP and PA. This study affirms the positive value of VP in fostering the use of construction dispute mediation.
Details
Keywords
Sangita Choudhary, Tapan Kumar Panda and Abhishek Behl
Amid increasing frequency of disaster across the globe, humanitarian supply chain (HSC) has gained significant attention in recent times. This work aims to contribute towards…
Abstract
Purpose
Amid increasing frequency of disaster across the globe, humanitarian supply chain (HSC) has gained significant attention in recent times. This work aims to contribute towards improving the decision-making capabilities of relief organisations by offering more comprehensive understanding of the critical success factors (CSFs) concerning HSC. Hence, the current work attempts to classify CSFs as cause-and-effect factors and explore their relative importance in the stated significance.
Design/methodology/approach
Current work takes an explorative and deductive approach. It uses literature and experts' input to identify the CSFs for HSC and to develop a structural model for assessing these factors. Intuitionistic fuzzy DEMATEL (IF-D) is employed for modelling and analysing the cause-effect linkages among the CSFs. IF-D method is chosen as it is robust to vagueness of data and small samples.
Findings
The findings indicate that “motivated and committed employees” is the most influencing causal factor followed by “IT infrastructure”, and among effect factors, “physical network” carries the most significance followed by “anticipation capabilities.”
Practical implications
Relief organisations and stakeholders at various levels may put more emphasis on cause group factors with more influence on most critical effect factors to build more efficient and effective HSC to execute more impactful relief programs.
Originality/value
Current work explores the cause–effect relationships among the CSFs concerning HSC by implementing IF-D, which can be considered as the original contribution.
Details
Keywords
Sarthak Dhingra, Rakesh Raut, Angappa Gunasekaran, B. Koteswara Rao Naik and Venkateshwarlu Masuna
This paper aims to discover and analyze the challenges hampering blockchain technology’s (BT’s) implementation in the Indian health-care sector. A total of 18 challenges have been…
Abstract
Purpose
This paper aims to discover and analyze the challenges hampering blockchain technology’s (BT’s) implementation in the Indian health-care sector. A total of 18 challenges have been prioritized and modeled based on an extensive literature search and professional views.
Design/methodology/approach
An integrated multi-criteria decision-making approach has been used in two phases. Best worst method (BWM) is used in the first phase to prioritize the challenges with sensitivity analysis to validate the findings and eliminate a few challenges. In the second phase, interpretive structural modeling is applied to the remaining 15 challenges to obtain relative relationships among them with cross-impact matrix multiplication applied to classification analysis for their categorization.
Findings
The study’s results reveal that limited knowledge and expertise, cost and risk involved, technical issues, lack of clear regulations, resistance to change and lack of top management support are the top-ranked or high-intensity challenges according to the BWM. Interpretive structural modelling findings suggest that the lack of government initiatives has been driving other challenges with the highest driving power.
Research limitations/implications
This work has been conducted in the Indian context, so careful generalization of the results is needed.
Practical implications
This work will give health-care stakeholders a better perspective regarding blockchain’s adoption. It will help health-care stakeholders, service providers, researchers and policymakers get a glimpse of the strategies for eradicating mentioned challenges. The analysis will help reduce the challenges’ impact on blockchain’s adoption in the Indian health-care sector.
Originality/value
The adoption of BT is a novel concept, especially in developing countries such as India. This is one of the few works addressing the challenges to BT adoption in the Indian health-care sector.
Details
Keywords
Roslina Ab Wahid and Peck-Leong Tan
The purpose of the study is to identify the perceived lack of certain core knowledge, skills and attributes in external quality auditors (EQAs) that contributes to an audit…
Abstract
Purpose
The purpose of the study is to identify the perceived lack of certain core knowledge, skills and attributes in external quality auditors (EQAs) that contributes to an audit process that does not add value for client organizations. This paper describes the development of a competency requirement framework for quality management system (QMS) EQAs that would improve their capability and audit performance.
Design/methodology/approach
A review of relevant international literature on auditor competence and education, clients' expectations on external auditors, explicit and implicit expectations based on ISO 9001:2015 and ISO 19011:2018, and current auditor capability was conducted to obtain insights into the present situation and requirements of the environment. A survey questionnaire was then utilized in the collection of data from 19 heads of certification and technical reviewers of accredited certification bodies (CBs) in Malaysia. Univariate and bivariate analysis were used in analyzing the data from respondents.
Findings
The overall results show that the most important components of knowledge for EQAs to possess are quality management principles, system and standards; risk management; and business process and operations management. In terms of skills, the most important skills for auditors are auditing and report writing and critical/analytical thinking, followed by communication/interpersonal/people/ICT and team management. Attributes such as integrity, being ethical, professional and objective are found to be most important in EQAs to be effective and add value to the audits. Based on the results, the competency requirement framework of EQAs was developed.
Originality/value
This paper presents the knowledge, skills, attitudes and experience needed by EQAs identified by the CBs which is then developed into a competency requirements framework for future auditor training. The resulting framework from the study can be used by accreditation bodies, CBs and training organizations to evaluate and improve the auditors' competence and audit performance in the future.
Details
Keywords
Mingnan Jiang, Yang Gao, Mingwei Jin and Sitong Liu
The purpose of this study is to explore a sustainable hierarchical framework for the business environment in smart cities. However, this hierarchical framework must consider…
Abstract
Purpose
The purpose of this study is to explore a sustainable hierarchical framework for the business environment in smart cities. However, this hierarchical framework must consider unnecessary attributes and interrelationships between criteria to capture the difference between smart cities and traditional cities.
Design/methodology/approach
Hence, the fuzzy set theory is used for screening unnecessary attributes, the decision-making and trial evaluation laboratory (DEMATEL) is applied to manage the complex interrelationships among the aspects and attributes and interpretive structural modeling (ISM) is used to divide the hierarchy and construct a hierarchical theoretical framework. Ultimately, this research is applied to develop a sustainable hierarchical framework of the business environment in smart cities.
Findings
The results show that traditional social problems are still at the core of business environment development in smart cities, new smart opportunities may be discovered, but they are still limited by traditional social factors, the economy is still the main aspect of the business environment and there are still obstacles to solving social problems with smart technologies.
Originality/value
This theoretical hierarchical framework aims to guide smart cities toward sustainability. This study also proposes creating a predictable business environment by improving administrative efficiency, transparency, social mobility and infrastructure services and cultivating new business opportunities with intelligent technology.
Details
Keywords
This paper describes the results of an extensive search into two factors which effect, to a high degree, the efficiency of on‐line information retrieval. These two factors are…
Abstract
This paper describes the results of an extensive search into two factors which effect, to a high degree, the efficiency of on‐line information retrieval. These two factors are firstly the manner by which keywords are chosen as a means of retrieval by the reviewers of the reference work and secondly the degree with which papers with comparable contents are accorded similar keywords. The influence of these two factors on the practical results of on‐line retrieval is shown by the example of two extensive searches: these searches were done manually as well as on‐line. From these two methods it is then possible to compare what is retrieved by the computer and what is in reality available.
AN OVERLAY bearing is a bearing with a precision electroplated overlay of lead‐tin or lead‐indium alloy, 20 to 40µ thick. This lead‐alloy overlay is generally applied to a…
Abstract
AN OVERLAY bearing is a bearing with a precision electroplated overlay of lead‐tin or lead‐indium alloy, 20 to 40µ thick. This lead‐alloy overlay is generally applied to a copper‐lead or lead‐bronze substrate, which is itself bonded to a steel backing. Bearings of this construction are probably the most extensively used type of engine bearings; many millions are manufactured annually. The main functions of the overlay are to provide a seizure‐resistant surface, to increase the tolerance of the bearing for dirt and wear‐debris, and to protect the lead in the underlying copper‐lead or lead‐bronze alloy from corrosion by oxidized oil. When mineral oils are exposed to air oxidation for prolonged periods at elevated temperatures, weak organic acids are formed which can dissolve pure lead. The lead in copper‐lead or lead‐bronze is present as a separate, unalloyed phase, very susceptible to corrosion by weak organic acids. However, it has been known for some time that if lead is alloyed with indium or tin it is not corroded in this way. Most bearing manufacturers incorporate at least 4%w indium or 8%w tin in overlays to make them resistant to corrosion, but precise information on the amounts of alloying element required is not available.
Wang Yu, Gang Chen, Haiyan Yang and Sisi Li
A series of sulfate-based Gemini anionic surfactants were synthesized via etherification, ring opening and sulfation reactions using epichlorohydrin, fatty alcohol, ethylene…
Abstract
Purpose
A series of sulfate-based Gemini anionic surfactants were synthesized via etherification, ring opening and sulfation reactions using epichlorohydrin, fatty alcohol, ethylene glycol and chlorosulfonic acid as the main raw materials. Orthogonal experiments for 1,8-bisalkoxymethylene-3,6-dioxin-1,8-octane disulfate were performed on the sulfation reaction to determine the optimal reaction conditions.
Design/methodology/approach
A series of sulfate-based Gemini anionic surfactants were synthesized via etherification, ring opening and sulfation reactions using epichlorohydrin, fatty alcohol, ethylene glycol and chlorosulfonic acid as the main raw materials. Orthogonal experiments for 1,8-bisalkoxymethylene-3,6-dioxin-1,8-octane disulfate were performed on the sulfation reaction to determine the optimal reaction conditions. The structures of the intermediate and final products were characterized by FT-IR (Fourier transform infrared spectroscopy analysis), 1H-NMR (proton nuclear magnetic resonance spectroscopy) methods. The thermal performance of surfactants was analyzed using thermogravimetric analysis (TGA). The thermogravimetric results showed that the sulfate-based Gemini surfactants had good heat resistance (the thermal decomposition temperature of which was in the range of 140∼170?). The Krafft point, surface tension, foaming, Hydrophile–Lipophile Balance Number (HLB), emulsifying, wetting, and lime-soap dispersing performance were measured by visual observation, hanging drop method, aqueous surfactant solution method and Borghetti–Bergman method, respectively. The results have shown that all the sulfate-based Gemini surfactants had good water solubility and lime-soap dispersing ability. When spacer group was -(CH2)2-, with the increase of the carbon chain length from C12 to C14, the micellar concentration critical micelle concentration and surface tension (CMC) gradually increased from 8.25 × 10–4 mol/L to 8.75 × 10–4 mol/L and 27.5 mN/m to 30.9 mN/m, respectively. Also, the sulfate-based Gemini surfactants with the different length of the spacer group had a different effect on their performance on foaming properties and foam properties, HLB and emulsifying ability and wetting ability.
Findings
In view of the important role of the spacer group and the general use of anionic surfactants in oil fields, this article considers the preparation of a series of sulfate-based Gemini surfactants by changing the spacer group and the chain length of the hydrophobic group and evaluating their surface activity, and finally its Kraffi, on the foam properties, HLB value, emulsifying performance, lime soap dispersing ability etc.
Originality/value
Sulfate-based Gemini surfactants have broad application prospects in the fields of oil and gas exploitation, environmental protection, chemistry and daily chemical industry and so on.
Details
Keywords
Sourabh Kumar and Mukesh Kumar Barua
This research identifies the supply chain performance indices and designs an evaluation framework to assess and compare the Indian petroleum supply chain performance. We presented…
Abstract
Purpose
This research identifies the supply chain performance indices and designs an evaluation framework to assess and compare the Indian petroleum supply chain performance. We presented a case study of three Indian petroleum companies. For this purpose, we identified fifteen performance criteria extracted from previous literature and expert inputs and classified them into four groups.
Design/methodology/approach
A fuzzy technique for order preference by similarity to the ideal solution (TOPSIS) method is employed for evaluating the performance of the Indian petroleum supply chain.
Findings
The design and evaluation framework suggests that the top three performance measurement criteria, the purity of the products, compliance with environmental laws, and new technology adoption. The result findings also indicate that company C contributes to a maximum satisfaction level of 77%. Simultaneously, companies A and B hold satisfaction levels of 72% and 67%.
Practical implications
The managers should ensure that environmental standards, new technology adoption, and quality are significant concerns in the petroleum supply chain. The managers should follow national and international policies to preserve the environment and ensure safety in operational activities.
Originality/value
This paper makes two contributions in the domain of performance measurement of the petroleum supply chain. First, it identifies the prominent supply chain performance indices. Second, it proposes a model to assess and compare the performance of Indian petroleum companies.
Details