Search results

This study aims to investigate the effect of smoking on the income of workers in the Brazilian labor market.

Using data from the 2019 National Health Survey (PNS), we initially address the sample selection bias concerning labor market participation by using the Heckman (1979) method. Subsequently, the decomposition of income between smokers and nonsmokers is analyzed, both on average and across the earnings distribution by employing the procedure of Firpo, Fortin, and Lemieux (2009) - FFL decomposition. Ñopo (2008) technique is also used to obtain more robust estimates.

Overall, the findings indicate an income penalty for smokers in the Brazilian labor market across both the average and all quantiles of the income distribution. Notably, the most significant differentials and income penalties against smokers are observed in the lower quantiles of the distribution. Conversely, in the higher quantiles, there is a tendency toward a smaller magnitude of this gap, with limited evidence of an income penalty associated with this habit.

This study presents an important limitation, which refers to a restriction of the PNS (2019), which does not provide information about some subjective factors that also tend to influence the levels of labor income, such as the level of effort and specific ability of each worker, whether smokers or not, something that could also, in some way, be related to some latent individual predisposition that would influence the choice of smoking.

The relevance of the present study is clear in identifying the heterogeneity of the income gap in favor of nonsmokers, as in the lower quantiles there was a greater magnitude of differentials against smokers and a greater incidence of unexplained penalties in the income of these workers, while in the higher quantiles, there was low magnitude of the differentials and little evidence that there is a penalty in earnings since the worker is a smoker.

Understanding how attributes, consequences and values (A-C-V) influence the predisposition to purchase and buying intention of organic food consumers (OFC) is crucial for its stakeholders. This study aims to (1) investigate whether OFC perceptions of the A-C-V impact their predisposition to purchase and buying intention; (2) examine the mediating effect of predisposition to purchase on the relationship between OFC personal values and their buying intentions and (3) verify whether consumers with distinct levels of organic food-buying intention perceive differently of the A-C-V, predisposition to purchase and consumption frequency.

This quantitative study comprised 307 consumers who filled out a form about their perceptions of organic foods’ A-C-V and their consumption frequency, purchasing predisposition and buying intention. Partial least squares strutural equation modelling (PLS-SEM) tested the hypothetical model that resorted to the means-end chain (MEC) theory (Gutman, 1982). Cluster analysis based on OFC’s buying intentions compared their perceptions of the A-C-V, purchasing predisposition and consumption frequency.

The OFC’s perception of the attributes of these foods impacts the consequences of their consumption and values. Such values positively influence their purchase predisposition and buying intention. Predisposition to purchase measured the relationship between OFC values and purchase intention. Three OFC clusters were identified according to their buying intentions. Such groups perceive the A-C-V singularly and have different purchasing predispositions and consumption frequencies.

OFC values directly influence buying intentions. However, the predisposition to purchase strongly mediates the relationship between values and buying intentions, producing an indirect impact more notable than a direct one. It brings academic and managerial contributions to organic food stakeholders.

This study aims to further the understanding of multi-level analysis in inter-organisational relationships by investigating the interplay of governance, cooperation and coordination in inter-organisational projects (IOPs) on sub-system and project levels.

The authors use the Viable Systems Model as a framework to analyse inter-organisational project governance, cooperation and coordination by adopting a multiple-case study.

The findings illustrate how governance and coordination mechanisms exhibit a filter-down effect on lower sub-systems while cooperation influence is confined within each sub-system. While remarking the importance of specific sub-systems on the overall project performance, the interplay of governance, cooperation and coordination across sub-systems appears to be complex, with governance influencing cooperation and coordination, whereas cooperation and coordination influence each other with an incremental effect.

This study defines two propositions that explain how multiple levels of analysis (project and sub-systems) can support the governance of large inter-organisational projects. The authors elaborate theory on the interplay of inter-organisational project governance, cooperation and coordination.

The simulated scenarios can be used to compute risk premiums per risk class in the portfolio. These can then be used to adjust the policy premiums by accounting for storm risk.

A complete model to analyse and characterise future losses of the property portfolio of an insurance company due to hurricanes is proposed. The model is calibrated by using the loss data of the Fidelidade insurance company property portfolio resulting from Hurricane Leslie, which hit the centre of continental Portugal in October, 2018.

Several scenarios are simulated and risk maps are constructed. The risk map of the company depends on its portfolio, especially its exposure, and provides a Hurricane risk management tool for the insurance company.

A statistical model is considered, in which weather data is not required. The authors reconstruct the behaviour of storms through the registered claims and respective losses.

The COVID-19 pandemic has created a significant disruption in the educational systems worldwide. Some institutions opted for emergency remote education due to the need to cancel in-person activities. The aims of this paper were to evaluate the use of asynchronous methodology in health sciences education, determine whether asynchronous methodology was sacrificing overall student satisfaction, and investigate whether satisfaction improved as the program develops.

Initially, there was phase 1 that corresponded to four weeks of activities. Each professor produced a video lesson, and after each video lesson, a weekly educational activity was made available. Next, phase 2 was implemented using the same methodology, however lasting six weeks. Three questionnaires were developed, and a Likert scale was administered to verify the students’ level of satisfaction. Data were analyzed using frequency distributions, mean values, standard deviation and confidence interval. The normality of the sum data (total of the questionnaires) was tested using the Kolmogorov–Smirnov test.

Although the students pointed out that the asynchronous methodology facilitated access to the content and considered this methodology satisfactory, they expressed a reduced level of satisfaction regarding emergency remote education in general when data from the first weeks were compared to those of the previous weeks. It is clear that students became increasingly discouraged and tired over time, which motivated the institution to shift into a combination of synchronous and asynchronous methodology to improve student learning.

Teaching in the field of health care encompasses difficult competencies that sometimes are impossible to be learned remotely, so there is a need to examine and evaluate properly the remote education in this area. With careful planning, educational institutions can evaluate their experiences during the pandemic, allowing those involved to highlight strengths and identify weaknesses to better prepare for future needs to improve remote education.

In the analysis of structures in a fire situation by simplified and analytical methods, one assumption is that the fire resistance time is greater than or equal to the required fire resistance time. Among the methodologies involving the fire resistance time, the most used is the tabular method, which associates fire resistance time values to structural elements based on minimum dimensions of the cross section. The tabular method is widely accepted by the technical-scientific community due to the fact that it is safe and practical. However, its main criticism is that it results in lower fire resistance times than advanced thermal and thermostructural analysis methods. The objective of this study was to evaluate the fire resistance time of reinforced concrete beams and compare it with the required fire resistance time recommended by the tabular method of NBR 15200 (ABNT, 2012).

The fire resistance time and required fire resistance time of reinforced concrete beams were evaluated using, respectively, numerical models developed based on the finite element method and the tabular method of NBR 15200 (ABNT, 2012). The influence of the following parameters was investigated: longitudinal reinforcement cover, characteristic compressive strength of concrete, beam height, longitudinal reinforcement area and arrangement of steel bars.

Among the evaluated parameters, the covering of the longitudinal reinforcement proved to be more relevant for the fire resistance time, justifying that the tabular method of NBR 15200 (ABNT, 2012) being strongly and directly influenced by this parameter. In turn, more resistant concretes, higher beams and higher steel grades have lower fire resistance time values. This is because beams in these conditions have greater resistance capacity at room temperature and, consequently, are subject to external stresses of greater magnitude. In some cases, the fire resistance time was even lower than the required fire resistance time prescribed by NBR 15200 (ABNT, 2012). Both the fire resistance time and the required fire resistance time were not influenced by the arrangement of the longitudinal reinforcements.

The present paper innovates by demonstrating the influence of other important design variables on the required fire resistance time of the NBR 15200 (ABNT, 2012). Among several conclusions, it was found that the load level to which the structural elements are subjected considerably affects their fire resistance time. For this reason, it was recommended that the methods for calculating the required fire resistance time consider the load level. In addition, the article quantifies the security degree of the tabular method and exposes some situations for which the tabular method proved to be unsafe. Moreover, in all the models analyzed, the relationship between the span and the vertical deflection associated with the failure of the beams in a fire situation was determined. With this, a span over average deflection relationship was presented in which beams in fire situations fail.

Small and medium-sized enterprises (SMEs) are fundamental to the socioeconomic development of a country or region. They directly contribute to increasing employment generation and improving income distribution. Despite the importance of SMEs, there are still opportunities for developing works that support and guide SMEs to use digital technologies, especially to digitalize their customer service. Therefore, this work aims to propose drivers containing recommendations for developing and improving the digitalization of customer service in SMEs.

This work uses a qualitative approach to systematize the main SMEs' characteristics and identify the boosting elements of the digitalization of customer service in the scientific literature. To this end, the authors conducted a content analysis of the most influential empirical and theoretical articles on the theme published from 2016 to 2021 in the Scopus database.

This work identified 38 boosting elements of the digitalization of customer service based on the scientific literature. These elements were grouped into six drivers for developing and improving the digitalization of customer service. The drivers contain recommendations that were adapted for SMEs according to their characteristics and based on the experience of the authors of this work.

This work contributes to promoting socioeconomic development, providing important solutions for managers and owners of SMEs to improve their customer service. The proposed drivers support and encourage the use of digital technologies for developing and improving customer service, overcoming the challenges of digitalization in these companies. Thus, SMEs will be able to increase the satisfaction of their customers and improve their competitiveness.

This study proposes a tensegrity-based traction structure with D-bar dual cable units. It is used to connect the airship and the ground to stabilize the airship.

The mathematical models and dynamic models of the D-bar dual cable (hereafter referred to as DD cable) unit of the tensegrity-based traction structure are established. Based on the minimum mass method, the mass of the DD cable unit in the critical state (cable member is yielding, or bar member is buckling or yielding) is analyzed. Then, the tensile strength of the DD cable unit and single cable unit under the same condition is compared using the control variate method. Finally, based on ANSYS dynamic simulation, the stability of the two structures under the same external force disturbance was tested.

Expressions for the minimum mass of the DD cable unit under different failure conditions are solved. Dynamic simulation results show that the capacity of resisting disturbance of the DD cable unit is much better than that of the single cable unit under the same wind speed. So, we find a structure more suitable for the fixed connection of an airship.

This study helps to provide theoretical reference and thinking for the practical application of the traction structure with a D-bar dual cable unit.

The current era of the fourth industrial revolution has attracted significant research on the use of digital technologies in improving construction project delivery. However, less emphasis has been placed on how these digital tools will influence the management of the construction workforce. To this end, using a review of existing works, this chapter explores the fourth industrial revolution and its associated technologies that can positively impact the management of the construction workforce when implemented. Also, the possible challenges that might truncate the successful deployment of digital technologies for effective workforce management were explored. The chapter submitted that implementing workforce management-specific digital platforms and other digital technologies designed for project delivery can aid effective workforce management within construction organisations. Technologies such as cloud computing, the Internet of Things, big data analytics, robotics and automation, and artificial intelligence, among others, offer significant benefits to the effective workforce management of construction organisations. However, several challenges, such as resistance to change due to fear of job loss, cost of investment in digital tools, organisational structure and culture, must be carefully considered as they might affect the successful use of digital tools and by extension, impact the success of workforce management in the organisations.

One of the most marginalized communities in India is the Lesbian, Gay, Bisexual and Transgender (LGBT) community which commonly experiences discrimination. Many studies have countered that the LGBT community faces high discrimination in the banking and financing industry. As a result, this study concentrates on this marginalized community and its acceptance and continuation habit regarding mobile wallets. Consequently, this study has considered continuance intentions as a response to confirm the progress of the mobile-wallet industry. Also, this study tried to study the relationship between behavioral intention (BI) and continuous intention (CI) which is seriously lacks in the library of literature. The research operationalized the stimulus–organism–response (SOR) framework for the conceptual model and surveyed 100 self-proclaimed members of the LGBT community in India. The analysis has been done using the partial least structure (PLS). The findings demonstrate that variables like perceived trust (PT) directly influence the BI. On the other hand, variables like perceived ease of use (PEoU), social influence (SI), and satisfaction (S) doesn’t influence BI of the LGBT Community. The main outcome was a favorable association between BI and CI. It will help the stakeholders to understand how important this new market avenue is and how it can be explored. To ensure safe and secure transactions, a group think tank composed of important parties (financial institutions, mobile-wallet providers, the government, security specialists, etc.) should make recommendations. Mobile-wallet providers will attain benefit from this study’s understanding of user categories and ability to tailor their service offers as per the community.