Search results
1 – 10 of 214Kemal Altıparmak and Turgut Öziş
The purpose of this paper is to present an approach capable of solving Burgers' equation. Diagonal Padé approximation with a factorization scheme is applied to find numerical…
Abstract
Purpose
The purpose of this paper is to present an approach capable of solving Burgers' equation. Diagonal Padé approximation with a factorization scheme is applied to find numerical solutions of the one‐dimensional Burgers' equation by presenting explicit factoring the polynomials of the approximation. The numerical results obtained by this approach, for various values of viscosity, have been compared with the exact solution and are found to be in good agreement with each other.
Design/methodology/approach
In this paper, factorized diagonal Padé approach is applied to solve Burgers' equation. In this method, Burgers' equation is reduced to a system of ordinary differential equations and is solved piecewise analytically to obtain the solution of the problem.
Findings
The results of proposed approach show that when the obtained results are compared to similar methods, this approach gives better accuracy. Also, the graphs with small ν values satisfy the physical properties of the problem; therefore, the approach is promising for nonlinear problems.
Research limitations/implications
The authors' experiments show that the applied method worked fine with Burgers' equation and they hope to extend it to some other nonlinear problems.
Practical implications
The proposed method is easy to implement and the given algorithm is easy to use, even for non experts. The approach is flexible to use high order Padé approximants.
Originality/value
In the approach described in the paper, Padé approximation is calculated in a different manner than the classical approach.
Details
Keywords
The purpose of this paper is to determine both analytically and numerically the kink solutions to a new one-dimensional, viscoelastic generalization of Burgers’ equation, which…
Abstract
Purpose
The purpose of this paper is to determine both analytically and numerically the kink solutions to a new one-dimensional, viscoelastic generalization of Burgers’ equation, which includes a non-linear constitutive law, and the number of kinks as functions of the non-linearity and relaxation parameters.
Design/methodology/approach
An analytical procedure and two explicit finite difference methods based on first-order accurate approximations to the first-order derivatives are used to determine the single- and double-kink solutions.
Findings
It is shown that only two parameters characterize the solution and that the existence of a shock wave requires that the (semi-positive) relaxation parameter be less than unity and the non-linearity parameter be less than two. It is also shown that negative values of the non-linearity parameter result in kinks with a single inflection point and strain and dissipation rates with a single relative minimum and a single, relative maximum, respectively. For non-linearity parameters between one and two, it is shown that the kink has three inflection points that merge into a single one as this parameter approaches one and that the strain and dissipation rates exhibit relative maxima and minima whose magnitudes decrease and increase as the relaxation and nonlinearity coefficients, respectively, are increased. It is also shown that the viscoelastic generalization of the Burgers equation presented here is related to an ϕ8−scalar field.
Originality/value
A new, one-dimensional, viscoelastic generalization of Burgers’ equation, which includes a non-linear constitutive law and relaxation is proposed, and its kink solutions are determined both analytically and numerically. The equation and its solutions are connected with scalar field theories and may be used to both studies the effects of the non-linearity and relaxation and assess the accuracy of numerical methods for first-order, non-linear partial differential equations.
Details
Keywords
The paper aims to compare and clarify the differences and between the two well-known decomposition spectral techniques; the Winer–Chaos expansion (WCE) and the Winer–Hermite…
Abstract
Purpose
The paper aims to compare and clarify the differences and between the two well-known decomposition spectral techniques; the Winer–Chaos expansion (WCE) and the Winer–Hermite expansion (WHE). The details of the two decompositions are outlined. The difficulties arise when using the two techniques are also mentioned along with the convergence orders. The reader can also find a collection of references to understand the two decompositions with their origins. The geometrical Brownian motion is considered as an example for an important process with exact solution for the sake of comparison. The two decompositions are found practical in analysing the SDEs. The WCE is, in general, simpler, while WHE is more efficient as it is the limit of WCE when using infinite number of random variables. The Burgers turbulence is considered as a nonlinear example and WHE is shown to be more efficient in detecting the turbulence. In general, WHE is more efficient especially in case of nonlinear and/or non-Gaussian processes.
Design/methodology/approach
The paper outlined the technical and literature review of the WCE and WHE techniques. Linear and nonlinear processes are compared to outline the comparison along with the convergence of both techniques.
Findings
The paper shows that both decompositions are practical in solving the stochastic differential equations. The WCE is found simpler and WHE is the limit when using infinite number of random variables in WCE. The WHE is more efficient especially in case of nonlinear problems.
Research limitations/implications
Applicable for SDEs with square integrable processes and coefficients satisfying Lipschitz conditions.
Originality/value
This paper fulfils a comparison required by the researchers in the stochastic analysis area. It also introduces a simple efficient technique to model the flow turbulence in the physical domain.
Details
Keywords
The purpose of this paper is to simulate numerical solutions of nonlinear Burgers' equation with two well‐known problems in order to verify the accuracy of the cubic B‐spline…
Abstract
Purpose
The purpose of this paper is to simulate numerical solutions of nonlinear Burgers' equation with two well‐known problems in order to verify the accuracy of the cubic B‐spline differential quadrature methods.
Design/methodology/approach
Cubic B‐spline differential quadrature methods have been used to discretize the Burgers' equation in space and the resultant ordinary equation system is integrated via Runge‐Kutta method of order four in time. Numerical results are compared with each other and some former results by calculating discrete root mean square and maximum error norms in each case. A matrix stability analysis is also performed by determining eigenvalues of the coefficient matrices numerically.
Findings
Numerical results show that differential quadrature methods based on cubic B‐splines generate acceptable solutions of nonlinear Burgers' equation. Constructing hybrid algorithms containing various basis to determine the weighting coefficients for higher order derivative approximations is also possible.
Originality/value
Nonlinear Burgers' equation is solved by cubic B‐spline differential quadrature methods.
Details
Keywords
The purpose of this paper is to develop an efficient numerical scheme for non-linear two-dimensional (2D) parabolic partial differential equations using modified bi-cubic B-spline…
Abstract
Purpose
The purpose of this paper is to develop an efficient numerical scheme for non-linear two-dimensional (2D) parabolic partial differential equations using modified bi-cubic B-spline functions. As a test case, method has been applied successfully to 2D Burgers equations.
Design/methodology/approach
The scheme is based on collocation of modified bi-cubic B-Spline functions. The authors used these functions for space variable and for its derivatives. Collocation form of the partial differential equation results into system of first-order ordinary differential equations (ODEs). The obtained system of ODEs has been solved by strong stability preserving Runge-Kutta method. The computational complexity of the method is O(p log(p)), where p denotes total number of mesh points.
Findings
Obtained numerical solutions are better than those available in literature. Ease of implementation and very small size of computational work are two major advantages of the present method. Moreover, this method provides approximate solutions not only at the grid points but also at any point in the solution domain.
Originality/value
First time, modified bi-cubic B-spline functions have been applied to non-linear 2D parabolic partial differential equations. Efficiency of the proposed method has been confirmed with numerical experiments. The authors conclude that the method provides convergent approximations and handles the equations very well in different cases.
Details
Keywords
Ram Jiwari, Sanjay Kumar and R.C. Mittal
The purpose of this paper is to develop two meshfree algorithms based on multiquadric radial basis functions (RBFs) and differential quadrature (DQ) technique for numerical…
Abstract
Purpose
The purpose of this paper is to develop two meshfree algorithms based on multiquadric radial basis functions (RBFs) and differential quadrature (DQ) technique for numerical simulation and to capture the shocks behavior of Burgers’ type problems.
Design/methodology/approach
The algorithms convert the problems into a system of ordinary differential equations which are solved by the Runge–Kutta method.
Findings
Two meshfree algorithms are developed and their stability is discussed. Numerical experiment is done to check the efficiency of the algorithms, and some shock behaviors of the problems are presented. The proposed algorithms are found to be accurate, simple and fast.
Originality/value
The present algorithms LRBF-DQM and GRBF-DQM are based on radial basis functions, which are new for Burgers’ type problems. It is concluded from the numerical experiments that LRBF-DQM is better than GRBF-DQM. The algorithms give better results than available literature.
Details
Keywords
The purpose of this paper is to determine both analytically and numerically the existence of smooth, cusped and sharp shock wave solutions to a one-dimensional model of…
Abstract
Purpose
The purpose of this paper is to determine both analytically and numerically the existence of smooth, cusped and sharp shock wave solutions to a one-dimensional model of microfluidic droplet ensembles, water flow in unsaturated flows, infiltration, etc., as functions of the powers of the convection and diffusion fluxes and upstream boundary condition; to study numerically the evolution of the wave for two different initial conditions; and to assess the accuracy of several finite difference methods for the solution of the degenerate, nonlinear, advection--diffusion equation that governs the model.
Design/methodology/approach
The theory of ordinary differential equations and several explicit, finite difference methods that use first- and second-order, accurate upwind, central and compact discretizations for the convection terms are used to determine the analytical solution for steadily propagating waves and the evolution of the wave fronts from hyperbolic tangent and piecewise linear initial conditions to steadily propagating waves, respectively. The amplitude and phase errors of the semi-discrete schemes are determined analytically and the accuracy of the discrete methods is assessed.
Findings
For non-zero upstream boundary conditions, it has been found both analytically and numerically that the shock wave is smooth and its steepness increases as the power of the diffusion term is increased and as the upstream boundary value is decreased. For zero upstream boundary conditions, smooth, cusped and sharp shock waves may be encountered depending on the powers of the convection and diffusion terms. For a linear diffusion flux, the shock wave is smooth, whereas, for a quadratic diffusion flux, the wave exhibits a cusped front whose left spatial derivative decreases as the power of the convection term is increased. For higher nonlinear diffusion fluxes, a sharp shock wave is observed. The wave speed decreases as the powers of both the convection and the diffusion terms are increased. The evolution of the solution from hyperbolic tangent and piecewise linear initial conditions shows that the wave back adapts rapidly to its final steady value, whereas the wave front takes much longer, especially for piecewise linear initial conditions, but the steady wave profile and speed are independent of the initial conditions. It is also shown that discretization of the nonlinear diffusion flux plays a more important role in the accuracy of first- and second-order upwind discretizations of the convection term than either a conservative or a non-conservative discretization of the latter. Second-order upwind and compact discretizations of the convection terms are shown to exhibit oscillations at the foot of the wave’s front where the solution is nil but its left spatial derivative is largest. The results obtained with a conservative, centered second--order accurate finite difference method are found to be in good agreement with those of the second-order accurate, central-upwind Kurganov--Tadmor method which is a non-oscillatory high-resolution shock-capturing procedure, but differ greatly from those obtained with a non-conservative, centered, second-order accurate scheme, where the gradients are largest.
Originality/value
A new, one-dimensional model for microfluidic droplet transport, water flow in unsaturated flows, infiltration, etc., that includes high-order convection fluxes and degenerate diffusion, is proposed and studied both analytically and numerically. Its smooth, cusped and sharp shock wave solutions have been determined analytically as functions of the powers of the nonlinear convection and diffusion fluxes and the boundary conditions. These solutions are used to assess the accuracy of several finite difference methods that use different orders of accuracy in space, and different discretizations of the convection and diffusion fluxes, and can be used to assess the accuracy of other numerical procedures for one-dimensional, degenerate, convection--diffusion equations.
Details
Keywords
The purpose of this paper is to both determine the effects of the nonlinearity on the wave dynamics and assess the temporal and spatial accuracy of five finite difference methods…
Abstract
Purpose
The purpose of this paper is to both determine the effects of the nonlinearity on the wave dynamics and assess the temporal and spatial accuracy of five finite difference methods for the solution of the inviscid generalized regularized long-wave (GRLW) equation subject to initial Gaussian conditions.
Design/methodology/approach
Two implicit second- and fourth-order accurate finite difference methods and three Runge-Kutta procedures are introduced. The methods employ a new dependent variable which contains the wave amplitude and its second-order spatial derivative. Numerical experiments are reported for several temporal and spatial step sizes in order to assess their accuracy and the preservation of the first two invariants of the inviscid GRLW equation as functions of the spatial and temporal orders of accuracy, and thus determine the conditions under which grid-independent results are obtained.
Findings
It has been found that the steepening of the wave increase as the nonlinearity exponent is increased and that the accuracy of the fourth-order Runge-Kutta method is comparable to that of a second-order implicit procedure for time steps smaller than 100th, and that only the fourth-order compact method is almost grid-independent if the time step is on the order of 1,000th and more than 5,000 grid points are used, because of the initial steepening of the initial profile, wave breakup and solitary wave propagation.
Originality/value
This is the first study where an accuracy assessment of wave breakup of the inviscid GRLW equation subject to initial Gaussian conditions is reported.
Details
Keywords
Wenjun Cai, Jianlin Wu and Jibao Gu
Innovation has been identified as a critical element to achieve firms' growth. The purpose of this study is to investigate the impact of chief executive officer (CEO) passion on…
Abstract
Purpose
Innovation has been identified as a critical element to achieve firms' growth. The purpose of this study is to investigate the impact of chief executive officer (CEO) passion on firm innovation, including exploratory and exploitative innovation and examine the moderating roles of market and technological turbulence.
Design/methodology/approach
This study adopts the methodology of survey and uses multisource and time-lagged data of 146 firms in China. Seemingly unrelated regression (SUR) is used to test the hypotheses of this study.
Findings
This study finds that CEO passion promotes exploratory and exploitative innovation. Results also indicate that market turbulence strengthens the effect of CEO passion on exploratory and exploitative innovation, whereas technological turbulence weakens such an effect.
Originality/value
CEO passion is an important, positive affect which inspires CEOs to work for firms, but it has not yet received enough attention in the innovation literature. This study contributes to examining the impact of CEO passion on firm innovation and contributes to the contingency under which CEO passion influences firm innovation. Furthermore, this research finds that the moderating effects of market and technological turbulence are different in the relationship between CEO passion and firm innovation.
Details
Keywords
THE subject of turbulence is one of great interest in the field of aerodynamics, and many investigations are in progress in the aerodynamical laboratories of the world on various…
Abstract
THE subject of turbulence is one of great interest in the field of aerodynamics, and many investigations are in progress in the aerodynamical laboratories of the world on various aspects of the subject. The recent international co‐operative measurements inaugurated under the auspices of the National Physical Laboratory of Great Britain have shown that turbulence is a factor of considerable importance in determining the forces acting on bodies in an air stream, and the chief question of the day is whether it is desirable to have large or small turbulence in wind tunnels.