Search results

Recently, there has been a shift toward the embodied energy assessment of buildings. However, the impact of material service life on the life-cycle embodied energy has received little attention. We aimed to address this knowledge gap, particularly in the context of the UAE and investigated the embodied energy associated with the use of concrete and other materials commonly used in residential buildings in the hot desert climate of the UAE.

Using input–output based hybrid analysis, we quantified the life-cycle embodied energy of a villa in the UAE with over 50 years of building life using the average, minimum, and maximum material service life values. Mathematical calculations were performed using MS Excel, and a detailed bill of quantities with >170 building materials and components of the villa were used for investigation.

For the base case, the initial embodied energy was 57% (7390.5 GJ), whereas the recurrent embodied energy was 43% (5,690 GJ) of the life-cycle embodied energy based on average material service life values. The proportion of the recurrent embodied energy with minimum material service life values was increased to 68% of the life-cycle embodied energy, while it dropped to 15% with maximum material service life values.

The findings provide new data to guide building construction in the UAE and show that recurrent embodied energy contributes significantly to life-cycle energy demand. Further, the study of material service life variations provides deeper insights into future building material specifications and management considerations for building maintenance.

Starting with the notion that each building has an overall life cycle, the paper uses building-based and investment-based life cycles to identify likely decision points for renovations, including sustainability enhancements, and identifies patterns in sustainability decisions.

This real estate insights paper considers how commercial real estate and the built environment it creates, owns and manages impacts the sustainability of urban areas and the globe. By combining building-based and investment-based life cycles, it is possible to develop a unique “sustainability enhancement quotient” for individual buildings and the built environment for an urban area over a given time interval.

Using two life cycles allows the identification and likelihood of sustainability decision points. The same life cycles and decision points are used to consider the likely extent of such renovations. This is in addition to continuous consideration of renovations producing economic benefits in the form of lower operating costs and quick return of capital.

Useful for investment decision-making and policy design and implementation.

This is a useful tool for public and private decision making. It is suggested that the sustainability enhancement quotient may be used to design and implement policies and decisions maximising the likelihood of sustainability enhancement in an urban area's built environment.

Provides a framework for more effective sustainability decisions and public policy. The public-private interplay inherent in every building is emphasised throughout.

Original combination of existing tools.

The calculation of buildings’ carbon footprint (CFP) is an important basis for formulating energy-saving and emission-reduction plans for building. As an important building type, there is currently no model that considers the time factor to accurately calculate the CFP of hospital building throughout their life cycle. This paper aims to establish a CFP calculation model that covers the life cycle of hospital building and considers time factor.

On the basis of field and literature research, the basic framework is built using dynamic life cycle assessment (DLCA), and the gray prediction model is used to predict the future value. Finally, a CFP model covering the whole life cycle has been constructed and applied to a hospital building in China.

The results applied to the case show that the CO₂ emission in the operation stage of the hospital building is much higher than that in other stages, and the total CO₂ emission in the dynamic and static analysis operation stage accounts for 83.66% and 79.03%, respectively; the difference of annual average emission of CO₂ reached 28.33%. The research results show that DLCA is more accurate than traditional static life cycle assessment (LCA) when measuring long-term objects such as carbon emissions in the whole life cycle of hospital building.

This research established a carbon emission calculation model that covers the life cycle of hospital building and considered time factor, which enriches the research on carbon emission of hospital building, a special and extensive public building, and dynamically quantifies the resource consumption of hospital building in the life cycle. This paper provided a certain reference for the green design, energy saving, emission reduction and efficient use of hospital building, obviously, the limitation is that this model is only applicable to hospital building.

Crucial transition of the Indian residential building sector into a low-emission economy require an in-depth understanding of the potentials for retrofitting the existing building stock. There are, however, limited studies that have recognised the interdependencies and trade-offs in the embodied energy and life cycle impact assessment of retrofit interventions. This research appraises the life cycle assessment and embodied energy output of a residential building in India to assess the environmental implications of selected retrofit scenarios.

This study utilises a single case study building project in South India to assess the effectiveness and impact of three retrofit scenarios based on life cycle assessment (LCA) and embodied energy (EE) estimates. The LCA was conducted using SimaPro version 9.3 and with background data from Ecoinvent database version 3.81. The EE estimates were calculated using material coefficients from relevant databases in the published literature. Monte Carlo Simulation is then used to allow for uncertainties in the estimates for the scenarios.

The three key findings that materialized from the study are as follows: (1) the retrofitting of Indian residential buildings could achieve up to 20% reduction in the life cycle energy emissions, (2) the modification of the building envelope and upgrading of the building service systems could suffice in providing optimum operational energy savings, if the electricity from the grid is sourced from renewable plants, and (3) the production of LEDs and other building services systems has the highest environmental impacts across a suite of LCA indicators.

The retrofitting of residential buildings in India will lead to better and improved opportunities to meet the commitments in the Paris Climate Change Agreement and will lead to enhanced savings for building owners.

This study aims to leverage the implementation of building information modelling (BIM) in facilities management (FM), and thus the integration of BIM and FM are explored. It looks at identifying the information needed to implement BIM application in FM, to determine the level of implementation of BIMFM as well as to recommend BIMFM application mapping for building life cycle.

This study applied qualitative methodology, upon which a purposive sampling to 16 interviewees were conducted among professionals involved in any BIM, FM, BIMFM projects. Final analysis was conducted using thematical analysis by ATLAS.ti software.

The types of information required to implement BIMFM range from managerial information, commercial information, technical information and all full life cycle data. The implementation of BIMFM is agreed as beneficial, as it builds up efficiency of building performance, able to close gap of loses information, helps to improve FM in terms of data management, mitigates the problems, identifies priority defects and to enhance the FM processes. Respondents also believed that the causes where there is no implementation of BIMFM is in the situations where things are in order and when it becomes very expensive.

This paper has managed to gather the essential elements toward leveraging the implementation of BIMFM in digital construction project which are in the means of information types, the needs of BIMFM implementation and towards the end drawing the BIMFM implementation plan framework that could be used as a reference for the practitioners and industry.

This paper proposes an intact framework for building life cycle energy estimation (LCEE), which includes three major energy sources: embodied, operational and mobile.

A systematic review is conducted to summarize the selected 109 studies published during 2012–2021 related to quantifying building energy consumption and its major estimation methodologies, tools and key influence parameters of three energy sources.

Results show that the method limitations and the variety of potential parameters lead to significant energy estimation errors. An in-depth qualitative discussion is conducted to identify research knowledge gaps and future directions.

With societies and economies developing rapidly across the world, a large amount of energy is consumed at an alarming rate. Unfortunately, its huge environmental impacts have forced many countries to take energy issues as urgent social problems to be solved. Even though the construction industry, as the one of most important carbon contributors, has been constantly and academically active, researchers still have not arrived at a clear consensus for system boundaries of life cycle energy. Besides, there is a significant difference between the actual and estimated values in countless current and advanced energy estimation approaches in the literature.

Energy analysis (EA) within a building information modelling (BIM) enables consistent data integration in central repositories and eases information exchange, reducing rework. However, data loss during information exchange from different BIM uses or disciplines is frequent. Therefore, a holistic approach for different BIM uses enables a coherent life cycle information flow. The life cycle information flow drives the reduction of data loss and model rework and enhances the seamless reuse of information. The latter requires a specification of the EA key performance indicators (KPIs) and integrating those in the process.

The paper presents a set of KPIs extracted from the developed EA process maps and interviews with expert stakeholders. These KPIs stem from the literature review and link to the benefits of EA through industry expert review. The study includes (1) development and validation of EA process maps adjusted to requirements from different stakeholders. (2) KPIs aligned with the EA process map, (3) identification of the drivers that can facilitate life cycle information exchange and (4) opportunities and obstacles for EA within BIM-enabled projects.

This paper depicts a viable alternative for EA process maps and KPIs in a BIM-enabled AEC design industry. The findings of this paper showcase the need for an EA within BIM with these KPIs integrated for a more effective process conforming to the current Open BIM Alliance guidance and contributing towards sustainable life cycle information flow.

The limitation of the research is the challenge of generalising the developed EA process maps; however, it can be adjusted to fit defined organisational use. The findings deduced from the developed EA process map only show KPIs to have the ability to facilitate adequate information flow during EA.

The AEC industry will benefit from the findings of this primary research as the industry will be able to contrast its process maps and KPIs to those developed in the paper.

This paper benefits the societal values in EA for the built environment in the design stages. The subsequent life cycle information flow will help achieve a consistent information set and decarbonised built environment.

The paper offers a practical overview of process maps and KPIs to embed EA into BIM, reducing the information loss and rework needed in the practice of this integration. The applicability of the solution is contrasted by consultation with experts and literature.

The purpose of this study is to examine the application of sustainable building design and operation within a university setting to determine its economic efficacy and potential for further university investment.

This study incorporated a life cycle cost analysis (LCCA), simple payback period and discounted payback period calculations to determine the return on investment, including a sensitivity analysis when comparing the energy use and financial benefits of the sustainable design of a multi-use facility at Toronto Metropolitan University with buildings of similar size and use-type.

It was found that there is a positive business argument for Canadian Universities to consider the use of sustainable design to reduce energy use and greenhouse gas (GHG) emissions. A reasonable payback period and net present value within an institutional context were determined using a life-cycle cost assessment approach.

This study was limited to the measure of only a single location. Certain assumptions regarding energy pricing and interest rates and the related sensitivities were anchored on a single year of time, and the results of this study may be subject to change should those prices or rates become significantly different over time. Considerations for future research include a longitudinal approach combined with a more detailed analysis of the effect of use-type on the variables discussed.

For university administrators, the results of this study may encourage institutions such as universities to approach new building projects through the lens of energy efficiency and environmental sustainability.

GHG emissions are a well-proven contributor to global climate change, and buildings remain a significant source of GHG emissions in Canada due to their winter heating and summer cooling loads. As a result, sustainable building design on university campuses can mitigate this impact by optimizing and reducing energy consumption.

Research related to the economic evaluation of sustainable building design on university campuses is generally limited, and this study represents the first of its kind in regard to an LCCA of a sustainably designed building on a Canadian University campus.

This study aims to quantify and compare the environmental impacts of Marble-stone and Kota-stone flooring options widely used for buildings in India. The study discusses the possibility of carbon sequestration through Bamboo cultivation in India.

The study has followed a standard life cycle assessment (LCA) framework based on ISO 14040 guidelines. Three distinct phases have been compared on midpoint and endpoint assessment categories – raw material, polishing and disposal. Primary data has been collected from the construction site in India, and secondary data has been collected from the Ecoinvent 3.0 database. Previous studies have been referred to discuss and calculate the area of bamboo cultivation required to sequestrate the generated carbon from the flooring.

The study has found that endpoint category damage to resources, and midpoint categories of climate change, metal depletion and agricultural land use are highly impacted in building floorings. The study has also found that the Marble-stone floor generates higher environmental impacts than the Kota-stone floor in most of the midpoint and endpoint impact categories. This difference is significant in the raw material phase due to the different compositions of stones. The study also found that Bamboo has excellent potential to act as a carbon sink and mitigate the generated carbon.

This study excludes human labour, cutting and distribution of floor tiles made of Marble-stone and Kota-stone. The researcher can use the study to evaluate, compare and benchmark the various building flooring options from the environmental perspective. The study aids to the body of knowledge available on the various building flooring options by presenting the LCA or the environmental impacts generated by two flooring options. It is expected that the architects and builders can use these results to develop carbon-neutral buildings. This study provides a methodology for governments, constructors, builders and individuals to evaluate, compare and benchmark the various construction materials from the environmental perspective by computing the environmental impacts throughout the life cycle of the materials.

This study compares two widely used building flooring options using the LCA methodology and evaluates the potential of bamboo cultivation near the buildings for carbon sinks. The study is unique because it shows the environmental impacts of two flooring options and the carbon sequestration method to mitigate/absorb the generated environmental impacts in or around the building itself through bamboo cultivation. This study may set the foundation for carbon-neutral buildings.

The built environment is taking enormous leaps towards its digitalization. Computer-aided tools such as building information modeling (BIM) are found in the forefront of this evolution, playing a critical role in creating the foundations for the upcoming development of smart low-carbon cities. However, the potential of BIM is still untapped – links will need to be created among the available and forthcoming methodologies under one integral operational system. The purpose of this paper is to present an integrated BIM-based life cycle-oriented framework for achieving sustainable constructions at the pre-construction phase. The developed framework represents an example of the approaches that the construction industry will need to adopt to integrate the different tools under an integrated smart city context.

The methodological approach follows the development of four same-volume different-configuration three-dimensional BIM designs, which are coupled with life cycle assessment (LCA) tools for establishing sustainable building design.

The results of this paper indicated that the choice of building design and shape can play a significant role in reducing the embodied energy and embodied carbon of buildings, achieving a reduction of up to 15% compared to a reference building of same volume and gross floor area.

The originality of this paper is found in its approach application by coupling three-dimensional BIM models with LCA data, the use of reinforcement detailing in an nD BIM study and the employment of country-specific LCA databases.