Search results

Occupant behavior can lead to considerable uncertainties in thermal comfort and air quality within buildings. To tackle this challenge, the use of probabilistic controls to simulate occupant behavior has emerged as a potential solution. This study seeks to analyze the performance of free-running households by examining adaptive thermal comfort and CO2 concentration, both crucial variables in indoor air quality. The investigation of indoor environment dynamics caused by the occupants' behavior, especially after the COVID-19 pandemic, became increasingly important. Specifically, it investigates 13 distinct window and shading control strategies in courtyard houses to identify the factors that prompt occupants to interact with shading and windows and determine which control approach effectively minimizes the performance gap.

This paper compares commonly used deterministic and probabilistic control functions and their effects on occupant comfort and indoor air quality in four zones surrounding a courtyard. The zones are differentiated by windows facing the courtyard. The study utilizes the energy management system (EMS) functionality of EnergyPlus within an algorithmic interface called Ladybug Tools. By modifying geometrical dimensions, orientation, window-to-wall ratio (WWR) and window operable fraction, a total of 465 cases are analyzed to identify effective control scenarios. According to the literature, these factors were selected because of their potential significant impact on occupants’ thermal comfort and indoor air quality, in addition to the natural ventilation flow rate. Additionally, the Random Forest algorithm is employed to estimate the individual impact of each control scenario on indoor thermal comfort and air quality metrics, including operative temperature and CO2 concentration.

The findings of the study confirmed that both deterministic and probabilistic window control algorithms were effective in reducing thermal discomfort hours, with reductions of 56.7 and 41.1%, respectively. Deterministic shading controls resulted in a reduction of 18.5%. Implementing the window control strategies led to a significant decrease of 87.8% in indoor CO2 concentration. The sensitivity analysis revealed that outdoor temperature exhibited the strongest positive correlation with indoor operative temperature while showing a negative correlation with indoor CO2 concentration. Furthermore, zone orientation and length were identified as the most influential design variables in achieving the desired performance outcomes.

It’s important to acknowledge the limitations of this study. Firstly, the potential impact of air circulation through the central zone was not considered. Secondly, the investigated control scenarios may have different impacts on air-conditioned buildings, especially when considering energy consumption. Thirdly, the study heavily relied on simulation tools and algorithms, which may limit its real-world applicability. The accuracy of the simulations depends on the quality of the input data and the assumptions made in the models. Fourthly, the case study is hypothetical in nature to be able to compare different control scenarios and their implications. Lastly, the comparative analysis was limited to a specific climate, which may restrict the generalizability of the findings in different climates.

Occupant behavior represents a significant source of uncertainty, particularly during the early stages of design. This study aims to offer a comparative analysis of various deterministic and probabilistic control scenarios that are based on occupant behavior. The study evaluates the effectiveness and validity of these proposed control scenarios, providing valuable insights for design decision-making.

The purpose of this paper is to report on the results of a study carried out to identify and analyse which potential subject areas may have impact on developments in the field of building maintenance (BM). That is, it is intended to contribute to the integration of new approaches so that building maintenance management (BMM) becomes as automated, digital and intelligent or smartness as possible in the near future.

The research approach has resulted in a theory that is essentially based on a qualitative design. The route followed was a literature review, involving the collection, analysis and interpretation of carefully selected information, mostly from recently published records. The data assembled and the empirical experience itself made it possible to present a comprehensive viewpoint and some future outlooks.

Five thematic areas considered as potentially impactful for BM developments have been highlighted, analysed and generically labelled as thematic base words, which are monitoring, automation, digitalisation, intelligence and smart. It is believed that these may be aspects that will lay the groundwork for a much more advanced and integrated agenda, featured by a high-tech vision.

This is thought to be a different way of looking at the problem, as it addresses five current issues together. Trendy technological aspects are quite innovative and advantageous for BMM, providing opportunities not yet widely explored and boosting the paradigm shift.

Building permitting is mostly a manual, labor intensive and time-consuming process. Initiatives for streamlining the process are not always helpful since they often fail to address the core problems within the process. A framework for modeling the permitting process can be useful to identify bottlenecks, core challenges and best practices. Hence, the authors aim to demonstrate and validate a previously suggested workflow for permit process modeling using the permitting process in Israel as a test case.

The authors implement qualitative expert interviews for data acquisition. The collected data are then processed for a qualitative data analysis. The results of the analysis are then validated using a focus group workshop in the field of building permits. In the test case the focus group consisted of Israeli experts.

The authors present a detailed overview of the as-is building permit process in Israel and the existing challenges. Through this test case, the authors found that the framework is applicable in different countries and that it can provide valuable insights into the core problems within the process. In addition, application of the same framework in different countries can provide comparable results that would allow the authors to identify best practices.

The major contribution of this work is the development and validation of a framework for building permitting process modeling which can be used to identify existing challenges and bottlenecks in the process. Implementing a structured and unified approach provides an opportunity to easily compare processes in different countries to identify best practices.

The UAE is among the fastest-growing facilities management (FM) markets globally. Nevertheless, conclusive evidence on this market is scarce in the literature. Therefore, this paper aims to provide an in-depth insight into the FM market in the UAE.

Fourteen interviewees were purposively selected to provide insight into FM status through their field experiences. A SWOT analysis of their answers held place.

Interviewees revealed that the main trends of FM in the UAE include interests in sustainability, integration of technology, health and safety, outsourcing FM, switching to total facilities management (TFM), and performance management systems use. Besides, the quality of the service in the FM market is driven by the real-estate boom, services sophistication, the increasing awareness of FM and focus on the quality of services. Furthermore, the interviews found that the recruitment of poorly skilled labors can threaten the FM market to meet the allocated budget, misperception of FM, the value of money, the lack of continuous follow-up with recent advancements in technologies and the lack of performance measurement models.

This paper highlights the major trends, drivers and threats of the FM market in the UAE, and the implications of its findings can direct FM organizations and researchers in their practices.

Improving buildability of building designs with the aid of buildability assessment is essential because of the effect of designs on construction. Despite the plethora of research into buildability reported over the years, a review of the literature shown a dearth of research into the factors supporting the implementation of buildability assessment. Because buildability assessment has been confirmed to be highly beneficial to construction business, this study aims to investigate the factors supporting the implementation of buildability assessment as a tool for buildability improvement using Nigeria as a representative case.

Survey research method was adopted for the study. Questionnaires were administered to a purposively selected group of architects, engineers, builders and quantity surveyors involved in construction project delivery within client, consulting and contracting organisations in Nigeria. A total of 368 questionnaires were distributed among the sampled participants, out of which, a total of 219 representing 60% were sufficiently filled and returned. Data collected were analysed using inferential and descriptive statistics.

The results revealed owner’s commitment, clients’ awareness of the benefits of conducting buildability assessment on building design, unity amongst different professionals in the construction industry, designers consider buildability important, adequate coordination amongst different design disciplines, adequate channel for co-ordination and communication between designers and constructors at the design stage and adequate support from the government as the top most seven factors supporting buildability assessment implementation in construction sector of Nigeria. Secondly, the results from the research revealed that there is no statistically significant difference in factors supporting buildability assessment implementation in construction between clients and consulting and contracting construction organisations in Nigeria.

The findings provide in-depth insight of the factors supporting the implementation of buildability assessment in construction that can help principal stakeholders in construction to facilitate development of strategies required in supporting the adoption and implementation of buildability assessment tool for buildability improvement.

This paper aims to establish a reliable scale measuring occupants’ levels of environmental trust in their work settings’ indoor air quality and explore the relationship between occupants’ levels of environmental trust and their perceived control over the air quality in their workspace.

The authors conducted occupant surveys concerning indoor air quality in an office building, and collected corresponding indoor air quality measurements. Descriptive statistics and correlation analysis results are reported to reveal occupants’ levels of environmental trust and perceived control.

Results reveal that psychological perceptions of indoor air quality can be quite neutral, even shortly after an extreme wildfire event resulting in very poor air quality in an urban area. Occupants’ sense of trust that their office building could protect them from harmful air outside, and their belief that the building could protect them from seasonal smoky conditions, each correlated positively with employees’ sense of control over the indoor air quality in their personal workspace.

This case study adds to an interdisciplinary understanding for facility managers and organizational leaders concerning a way to measure occupants’ sense of control over the indoor air quality in their building, as well as their environmental trust in terms of how protected they feel from harmful air quality conditions.

From May 2024, Victoria (Australia) will mandatorily raise the minimum house energy rating standards from 6 to 7 stars. However, the latest data shows that only 5.73% of new Victorian houses were designed beyond 7-star. While previous literature indicates the issue’s link to the compliance behaviour of building practitioners in the design phase, the underlying behavioural determinants are rarely explored. This study thus preliminarily examines building practitioners’ compliance behaviour with 7-star Australian house energy ratings and beyond.

Using a widely-applied method to initially examine an under-explored phenomenon, eight expert interviews were conducted with building practitioners, a state-level industry regulator and a leading national building energy policy researcher. The study triangulated the data with government-led research reports.

The experts indicate that most building practitioners involved in mainstream volume projects do not go for 7 stars, mainly due to perceived compliance costs and reliance on standardized designs. In contrast, those who work on custom projects are more willing to go beyond 7-star mostly due to the moral norms for a low-carbon environment. The experts further agree that four behavioural determinants (attitudes towards compliance, subjective norms, perceived behavioural control and personal norms) co-shape building practitioners’ compliance behaviour. Interventions targeting these behavioural determinants are recommended for achieving 7 stars and beyond.

This study demonstrates the behavioural determinants that influence building practitioners’ compliance decisions, and offers insight regarding how far they will go to meet 7 stars. It can facilitate the transition to 7 stars by informing policymakers of customized interventions to trigger behaviour change.

Despite the opportunities of digital twins (DTs) for smart buildings, limited research has been conducted regarding the facility management stage, and this is explained by the high complexity of accurately representing and modelling the physics behind the DTs process. This study thus organises and consolidates the fragmented literature on DTs implementation for smart buildings at the facility management stage by exploring the enablers, applications and challenges and examining the interrelationships amongst them.

A systematic literature review approach is adopted to analyse and synthesise the existing literature relating to the subject topic.

The study revealed six main categories of enablers of DTs for smart building at the facility management stage, namely perception technologies, network technologies, storage technologies, application technologies, knowledge-building and design processes. Three substantial categories of DTs application for smart buildings were revealed at the facility management stage: efficient operation and service monitoring, efficient building energy management and effective smart building maintenance. Subsequently, the top four major challenges were identified as being “lack of a systematic and comprehensive reference model”, “real-time data integration”, “the complexity and uncertainty nature of real-time data” and “real-time data visualisation”. An integrative framework is finally proposed by examining the interactive relationship amongst the enablers, the applications and the challenges.

The findings could guide facility managers/engineers to fairly understand the enablers, applications and challenges when DTs are being implemented to improve smart building performance and achieve user satisfaction at the facility management stage.

This study contributes to the knowledge body on DTs by extending the scope of the existing studies to identify the enablers and applications of DTs for smart buildings at the facility management stage and the specific challenges.

The purpose of this paper is to highlight the regulatory barriers to achieving sustainable buildings in Kosovo. The present paper focuses on regulatory barriers viewed from the perspective of construction industry experts in achieving sustainable buildings.

The present study uses a qualitative research method and semi-structured interviews as a research instrument. The present study interviews around 20 experts in construction and property management, property development, spatial planning and energy management.

The study finds that Kosovo building laws and regulations provide for the materials assessment criteria, but the materials assessment criteria are only for mechanic strength. The study further finds that the sustainability concept is not included and incorporated in Kosovo's urban planning laws and regulations. The study also finds that despite specific clauses mentioning energy performance certificates in the Law on Energy Performance of Buildings in Kosovo, energy performance certificates appears to be not enforced and the nature of the barrier is more organizational rather than regulatory. Finally, the study finds that Kosovo laws are silent as far as green labeling of building materials is concerned.

The implication of the present finding is that policymakers in Kosovo not only should include clear sustainable materials assessment criteria in the law, but also enforce those criteria through testing and inspection mechanisms included in the law and implemented in practice through funding and organizational support. Nonetheless, policymakers in Kosovo should contemplate amending the urban planning laws in Kosovo and include both the term of sustainability at the planning level and conformity guidelines for sustainable design that can be done at the administrative directive level. Further, the clauses in the law do not suffice if the clauses are not accompanied by specific systemic and organizational support in the issuance of energy performance certificates. Policymakers in Kosovo should be proactive in designing clauses that specify green labeling standards for materials; however, these labeling standards should not adversely affect the cost of construction and reduce the demand for real estate.

The study is the first qualitative study about the perception of construction professionals in Kosovo, regarding the regulatory barriers of sustainable buildings in Kosovo.

This study aims to explore the managerial conception of the determinants and barriers of sustainability integration into management control systems (MCS) of manufacturing companies in Sri Lanka. Although existing literature has explored the factors that influence the adoption of specific management controls to handle environmental and social issues, the role of management conception has been underrepresented. Specifically, literature is scarce in identifying contextual and organisational factors that influence corporates beyond mere adoption of controls but to integrate with regular controls, especially in developing countries such as Sri Lanka.

A multiple case study approach has been used to identify the management conception of barriers and enablers for sustainability control integration. The analysis is conducted based on a theoretical framework extending the work of Gond et al. (2012) and George et al. (2016). To obtain an in-depth and multifaceted view, semi-structured interviews were conducted with managers in charge of different functional departments of five manufacturing companies.

The findings identified managers’ perceived factors, such as environmental impact, stakeholder pressure (customer, competitor and regulatory authorities) and top management commitment, showing a clear difference between strongly and weakly integrated companies. Contrary to the literature, domestic regulatory pressure and multinational ownership do not sufficiently drive MCS sustainability integration.

The findings have implications for managers and practitioners to anticipate the potential barriers and determinants of sustainability integration and provide guidance to take proper measures to deal with them when designing and implementing their MCS.

The study adds value to the literature by presenting a theoretical framework based on the triangulation of different theories to recognise the significance of management idea in sustainable integration. Furthermore, because sustainable integration of MCS is a novel idea, this research is one of the earlier attempts to highlight problems from the perspective of developing countries.