Search results

This review scopes evidence on the use of social robots for older adults with depressive symptoms, in the scenario of smart cities, analyzing the age-related depression specificities, investigated contexts and intervention protocols' features.

Studies retrieved from two major databases were selected against inclusion and exclusion criteria. Studies were included if used social robots, included older adults over 60, and reported depressive symptoms measurements, with any type of research design. Papers not published in English, published as an abstract or study protocol, or not peer-reviewed were excluded.

28 relevant studies were included, in which PARO was the most used robot. Most studies included very older adults with neurocognitive disorders living in long-term care facilities. The intervention protocols were heterogeneous regarding the duration, session duration and frequency. Only 35.6% of the studies had a control group. Finally, only 32.1% of the studies showed a significant improvement in depression symptoms.

Despite the potential for using social robots in mental health interventions, in the scenario of smart cities, this review showed that their usefulness and effects in improving depressive symptoms in older adults have low internal and external validity. Future studies should consider factors as planning the intervention based on well-established supported therapies, characteristics and needs of the subjects, and the context in which the subjects are inserted.

We present a critical literature review debating Brazilian research on social and environmental accounting (SEA). The aim of this study is to understand the role of politics in the construction of hegemonies in SEA research in Brazil. In particular, we examine the role of hegemony in relation to the co-option of SEA literature and sustainability in the Brazilian context by the logic of development for economic growth in emerging economies. The methodological approach adopts a post-structural perspective that reflects Laclau and Mouffe’s discourse theory. The study employs a hermeneutical, rhetorical approach to understand and classify 352 Brazilian research articles on SEA. We employ Brown and Fraser’s (2006) categorizations of SEA literature to help in our analysis: the business case, the stakeholder–accountability approach, and the critical case. We argue that the business case is prominent in Brazilian studies. Second-stage analysis suggests that the major themes under discussion include measurement, consulting, and descriptive approach. We argue that these themes illustrate the degree of influence of the hegemonic politics relevant to emerging economics, as these themes predominantly concern economic growth and a capitalist context. This paper discusses trends and practices in the Brazilian literature on SEA and argues that the focus means that SEA avoids critical debates of the role of capitalist logics in an emerging economy concerning sustainability. We urge the Brazilian academy to understand the implications of its reifying agenda and engage, counter-hegemonically, in a social and political agenda beyond the hegemonic support of a particular set of capitalist interests.

This article analyzes the impact of the national culture, the dependence of the sector of activity on human capital, and the multinational character of the firm involved, on the degree of implementation of high performance work practices (HPWPs) in Ibero-American companies.

This quantitative study results from a survey of 614 Ibero-American firms, in 6 different countries. Multiple regressions were performed to test the hypothesis proposed.

HPWPs for employee recruitment and selection have been frequently implemented in Ibero-American countries. Three factors, i.e. national culture, degree of multinationality, and degree of dependence of the sector of activity on human capital, have a strong influence on the degree of implementation of HPWPs in general, at different degrees. For example, recruitment and selection practices are conditioned by the degree of multinationality, individualism, uncertainty avoidance, and power distance, while they are not influenced by masculinity and by the sector of activity.

HR managers must align the design and execution of HPWPs with the national culture, and with the characteristics of the sector of activity, they belong to. Domestic companies should also aspire to achieve the higher standards of multinational companies for specific HPWPs.

This study, to the authors’ best knowledge, is the first to provide insights into the influence of the three factors mentioned above on the degree of implementation of HPWPs in Ibero-American firms, using multiple regression analysis. The authors examine in this article a larger set of HPWPs than does most of the existing empirical literature.

In a pandemic framework (COVID-19), this chapter explores the impact of the global economy and socio-cultures concerning three axes: recreational, tourism, and hospitality. Although we slowly see an economic revival, it is well known that this sector of study is very susceptible to being affected by the context of nations. Following restrictions and measures taken by governments around the world to reduce the number of cases of coronavirus infections, many nations closed their borders, affecting international travel and by 2020 tourism had been reduced to the near cessation of operations due to the imminent fear of this poorly studied disease, and the service sector was negatively affected. It should be added that, according to the World Tourism Organization's projections, a decrease of between 20 and 30% is forecast for 2020 compared to the previous year.

Frugal innovation has gained prominence based on its potential contribution to sustainable development and the new opportunities that it offers to low-income customers. This paper aims to analyse the strategic knowledge transfer practices implemented by an entrepreneurial university for fostering frugal innovations within an emerging economy.

This study adopted a case study methodological approach. The selected case was the University of Campinas (Unicamp), one of the leading universities in Brazil in terms of research quality and technology transfer. The study built upon 14 interviews with key informants and secondary sources of data (official and public documents).

The findings highlight the multidimensional dynamics of frugal innovations arising from university–industry relationships. Key dimensions considered include the internal capabilities of universities to foster frugal innovations and connect them to markets, the surrounding innovation ecosystems in which the university is embedded and the overarching institutional framework.

The analysis of strategic management practices for frugal innovation requires an evolutionary perspective, but the findings lacked sufficient longitudinal information for a formal evaluation. Also, as our empirical analysis is based on an in-depth case study of one university, further validation in other contexts would be necessary.

This study offers new insights regarding the effectiveness of university-business collaboration partnerships for developing frugal innovations in emerging economies. Policymakers should promote societal programs enhancing the active participation of all agents involved in the entrepreneurial and innovation ecosystem. University managers should understand the challenges and the opportunities behind the adoption of an inclusive and societal orientation.

By adopting frugal innovation practices, universities can enhance their contribution of meeting the United Nations’ Sustainable Development Goals.

The literature on frugal innovation has emphasized the importance of networking between different types of firms, NGOs and governments, but the role of universities in frugal innovation remains mostly unexplored. This study addresses this gap by exploring how entrepreneurial universities participate in frugal innovations to meet societal challenges.

Protecting a nation’s heritage is an essential element for sustainable development. Heritage attracts tourism and drives tourist income, as well as bringing wider economic, social and environmental benefits. This study aims to improve understanding of the relationship between heritage protection spending in countries and economic development via tourism revenues via economic logic and the Kuznets curve.

This study applies economic modelling to test for the presence of a Kuznets curve. This study uses rare available matched data on heritage protection spending from UNESCO and on travel and tourism total contribution to gross domestic product (GDP) from the World Travel and Tourism Council.

This paper finds evidence of a negative quadratic relationship between heritage protection spending per capita and tourism GDP per capita, whereby increases in heritage spending initially lead to more tourism income (typically less developed nations), but then tourism spending increases more rapidly for smaller increases heritage spending on top of this initial investment (typically more developed nations). No countries are yet at the stage where they reap high tourism income from much lower levels of heritage spending.

The findings suggest that the future of heritage tourism will be very different to that of today; future tourism is likely to develop significantly through innovations in management approach and advanced technologies to manage the balance between demand and heritage degradation.

The predictive model allows us to plot future possibilities for heritage tourism, which in turn enables more informed decision-making regarding the planning and management of future heritage resources and tourism demand. Tourism heritage institutions and their benefactors should further plan and invest in innovations (such as technologies and management practices) to advanced economically and move along the tourism heritage Kuznets curve.

To the best of the author’s knowledge, this paper formally tests, for the first time, for the presence of a Kuznets curve in the relationship between heritage protection spending and tourism income. It provides original evidence of the value of applying the underlying theory of the Kuznets curve in a tourism context.

遗产保护工作是实现可持续发展的基本要素。作为重要的旅游吸引物, 遗产资源可以推动旅游业增收, 同时也会带来更广泛的经济、社会和环境效益。借由经济学逻辑和库兹涅茨曲线, 本研究开拓性地剖析了国家遗产保护支出和旅游财政收入带来的经济增长之间的关系。

本研究运用经济模型来检验库兹涅茨曲线的存在。研究所用相匹配的遗产保护支出和旅游业对GDP总贡献的珍贵数据分别来自联合国教科文组织和世界旅游理事会。

结果显示人均遗产保护支出与人均旅游GDP之间存在负曲线关系, 即最初增加遗产保护支出会带来相应的旅游收入增长（特别对于欠发达国家而言）, 然而有了最初的投资积累之后, 后续较小幅度的遗产保护支出增长便能带来较大的旅游收入增长（特别对于较发达国家而言）。目前还没有国家达到以较低的遗产支出水平获得高额旅游收入的阶段。

本文首次正式验证了遗产保护支出与旅游收入之间存在库兹涅茨曲线, 由此支持了库兹涅茨曲线基本理论在旅游情境中的应用价值。

研究结果表明, 未来的遗产旅游将与今天截然不同。通过创新管理方法和应用先进技术以协调旅游需求与遗产资源退化之间的关系, 未来的遗产旅游可能会得到显著发展。

通过预测模型, 我们能够描绘出遗产旅游可能的未来, 这反过来又使我们能够就未来遗产资源和遗产旅游需求的规划与管理做出更明智的决策。旅游遗产机构及其赞助者应进一步做好驱动创新的规划和投资（如技术和管理实践）, 以实现经济繁荣, 并使遗产旅游实践沿着库兹涅茨曲线的方向发展。

La protección del patrimonio de una nación es un elemento esencial para el desarrollo sostenible. El patrimonio atrae al turismo e impulsa los ingresos turísticos, además de aportar mayores beneficios económicos, sociales y ambientales. Este estudio realiza una contribución original mediante el análisis de la relación entre el gasto en protección del patrimonio en los países y el desarrollo económico a través de los ingresos del turismo basándose en la lógica económica y la curva de Kuznets.

El estudio aplica modelos económicos para contrastar la presencia de una curva de Kuznets. El estudio utiliza datos combinados disponibles sobre el gasto en protección del patrimonio de la UNESCO y sobre la contribución total de los viajes y el turismo al PIB del Consejo Mundial de Viajes y Turismo.

El trabajo evidencia una relación cuadrática negativa entre el gasto en protección del patrimonio per cápita y el PIB turístico per cápita, de forma que inicialmente, los aumentos en el gasto en patrimonio conducen a más ingresos por turismo (generalmente en naciones menos desarrolladas), pero el gasto turístico aumenta más rápidamente ante pequeños aumentos del gasto en patrimonio además de esta inversión inicial (generalmente en naciones más desarrolladas). Ningún país se encuentra en la etapa donde se alcance altos ingresos por turismo a partir de niveles inferiores de gasto en patrimonio.

Este trabajo prueba formalmente, por primera vez, la presencia de una curva de Kuznets en la relación entre el gasto en protección del patrimonio y los ingresos del turismo. Proporciona evidencia original del valor de aplicar la teoría subyacente de la curva de Kuznets en un contexto turístico.

Los resultados sugieren que el futuro del turismo patrimonial será muy diferente al de hoy; es probable que el turismo futuro se desarrolle significativamente a través de innovaciones en el enfoque de gestión y tecnologías avanzadas para gestionar el equilibrio entre la demanda y la degradación del patrimonio.

El modelo predictivo nos permite trazar las posibilidades futuras para el turismo patrimonial, lo que a su vez permite una toma de decisiones más informada sobre la planificación y gestión de los recursos patrimoniales futuros y la demanda turística. Las instituciones de patrimonio turístico y sus benefactores deben planificar e invertir aún más en innovaciones (como tecnologías y prácticas de gestión) para avanzar económicamente y moverse a lo largo de la curva de Kuznets del patrimonio turístico.

The innovation process demands an interaction between environment agents, knowledge generators and policies of incentive for innovation and not only development by companies. Universities have gradually become the core of the knowledge production system and, therefore, their role regarding innovation has become more important and diversified. This study is aimed at identifying the mechanisms of university–industry (U–I) collaboration, as well as the operationalization steps of the U–I collaboration process.

This study is aimed at identifying, based on a systematic literature review, the mechanisms of university–industry (U–I) collaboration, as well as the operationalization steps of the U–I collaboration process.

The analysis of the 72 selected articles enabled identifying 15 mechanisms of U–I collaboration, proposing a new classification for such mechanisms and developing a framework presenting the operationalization steps of the interaction process.

In this paper, the authors screened nearly 1,500 papers and analyzed in detail 86 papers addressing U–I collaboration, mechanisms of U–I collaboration and operationalization steps of the U–I collaboration process. This paper provides a new classification for such mechanisms and developing a framework presenting the operationalization steps of the interaction process. This research contributes to both theory and practice by highlighting managerial aspects and stimulating academic research on such timely topic.

Higher education institutions (HEIs) offer courses and programmes focusing on sustainability in economics, as courses on sustainable development (SD), which examine the economic, social and environmental dimensions of SD. This paper aims to examine sustainability integration in economics degree programmes.

Through an extensive literature review in Web of Science (WoS) and information search in Google, conducting to 28 relevant case studies, this paper elucidates the emphasis given to sustainability as part of economics degree programmes in HEIs.

The results suggest that, whereas the inclusion of sustainability components in this field is a growing trend, much still needs to be done to ensure that matters related to SD are part of the routine of university students studying economics.

It is worth noting that the literature review conducted in WoS was primarily aimed at assisting in the selection of university case studies. The 28 university case studies scrutinised in this study may lack sufficient representation from numerous developing countries.

This study highlights challenges in integrating the SD into economics degree programmes, suggesting the need for curriculum adjustments as underscoring operational issues, acting as barriers. The inclusion of sustainability in economics programmes must navigate operational issues stemming from packed timetables and busy schedules, requiring innovative solutions.

As far as the authors are aware, this study holds substantial importance in its emphasis on implementing sustainability within HEIs’ economics programmes, assisting in pursuing SD.

The novelty of this study lies in addressing sustainability with the specific economics focus programmes within the HEIs context.

At the end of 2019, the first case of the Corona Virus Disease (COVID-19) was reported in Wuhan city of China. The disease was declared a pandemic without imagining the magnitude of damage currently caused in all branches of the economy. One of the most affected sectors was food and mostly perishable food (PF), which are more susceptible to environmental conditions. Thus, the research examines the effect of the COVID-19 outbreak on Ecuador's perishable food supply chains (PFSCs) during the pandemic. It contributes to new results on the special issue (SI) PFSC response to event risk and uncertainty, such as those that generated the pandemic.

The data used are from primary information sources, which were collected through a questionnaire. The questionnaire was applied to 298 companies belonging to the sector, and later the information was processed through partial least squares structural equation model. The convergent validity, discriminate and robustness tests provide arguments for the suitability of the model. Therefore, the findings are reliable and valid for the adequate measures to improve the PFSC due to a COVID-19 outbreak.

The results show that the perception of personal risk (PPR) produced by COVID-19 has caused the companies of the PFSC to adopt preventive policies (PO) to avoid contagion and guarantee the operation of the companies. In addition, the PPR has been responsible for the alterations in the demand and price (DP) of PF. Next, PO and DP have a significant effect on PFSC, which shows the evidence favouring the malfunction of PFSC operations due to anti-contagion PO, the mismatch of DP. On the contrary, circular economy practices contribute to the excellent performance of the PFSC. Finally, the research suggests some policy implications to consider in improving the PFSC.

This study is the first to be carried out in Ecuador's country on the PFSC; its contribution is unprecedented and makes it a road-map to be considered to guarantee the correct functioning of the PFSCs, and it will provide policymakers with valid elements to design efficient PFSCs that better respond to unforeseen events and uncertainties. Future research will focus on analysing the management of PF consumption in Ecuador during the pandemic.

The purpose of this study is, to compare laser-based additive manufacturing and subtractive methods. Laser-based manufacturing is a widely used, noncontact, advanced manufacturing technique, which can be applied to a very wide range of materials, with particular emphasis on metals. In this paper, the governing principles of both laser-based subtractive of metals (LB-SM) and laser-based powder bed fusion (LB-PBF) of metallic materials are discussed and evaluated in terms of performance and capabilities. Using the principles of both laser-based methods, some new potential hybrid additive manufacturing options are discussed.

Production characteristics, such as surface quality, dimensional accuracy, material range, mechanical properties and applications, are reviewed and discussed. The process parameters for both LB-PBF and LB-SM were identified, and different factors that caused defects in both processes are explored. Advantages, disadvantages and limitations are explained and analyzed to shed light on the process selection for both additive and subtractive processes.

The performance of subtractive and additive processes is highly related to the material properties, such as diffusivity, reflectivity, thermal conductivity as well as laser parameters. LB-PBF has more influential factors affecting the quality of produced parts and is a more complex process. Both LB-SM and LB-PBF are flexible manufacturing methods that can be applied to a wide range of materials; however, they both suffer from low energy efficiency and production rate. These may be useful when producing highly innovative parts detailed, hollow products, such as medical implants.

This paper reviews the literature for both LB-PBF and LB-SM; nevertheless, the main contributions of this paper are twofold. To the best of the authors’ knowledge, this paper is one of the first to discuss the effect of the production process (both additive and subtractive) on the quality of the produced components. Also, some options for the hybrid capability of both LB-PBF and LB-SM are suggested to produce complex components with the desired macro- and microscale features.