Search results

This study aims to apply for the first time in literature a new multi-objective sensor selection and placement optimization methodology based on the multi-objective Lichtenberg algorithm and test the sensors' configuration found in a delamination identification case study.

This work aims to study the damage identification in an aircraft wing using the Lichtenberg and multi-objective Lichtenberg algorithms. The former is used to identify damages, while the last is associated with feature selection techniques to perform the first sensor placement optimization (SPO) methodology with variable sensor number. It is applied aiming for the largest amount of information about using the most used modal metrics in the literature and the smallest sensor number at the same time.

The proposed method was not only able to find a sensor configuration for each sensor number and modal metric but also found one that had full accuracy in identifying delamination location and severity considering triaxial modal displacements and minimal sensor number for all wing sections.

This study demonstrates for the first time in the literature how the most used modal metrics vary with the sensor number for an aircraft wing using a new multi-objective sensor selection and placement optimization methodology based on the multi-objective Lichtenberg algorithm.

The direct torque control (DTC) of induction motor (IM) drive is featured by high ripples in the electromagnetic torque and stator flux profiles because they are controlled by two hysteresis regulators. Furthermore, the machine flux is not directly measurable. Hence, it is better to reconstitute it from the instantaneous electrical equations of the machine. Once the stator flux is estimated, we can guarantee a reliable sensorless DTC control. Thus, the purpose of this research work is to ensure fast response and full reference tracking of the IM under sensorless DTC strategy with desired dynamic behavior and low ripple levels.

In this work, an improved DTC strategy, which is DTC_SVM_3L, is suggested. The first step of the designed approach is to substitute the conventional inverter feeding the motor with a three-level inverter because it guarantees reduced switching losses, improved quality of voltage waveform and low-current total harmonic distortion rate. The second aim of this paper is to make the IM operate at a constant switching frequency by using the nearest three vectors-based space vector modulation (SVM) technique rather than hysteresis controllers. The third objective of this study is to conceive a sliding-mode stator flux observer, which can improve the control performances by using a sensorless algorithm to get an accurate estimation, and consequently, increase the reliability of the system and decrease the cost of using sensors. The stability of the proposed observer is demonstrated based on the Lyapunov theory. To overcome the load change disturbance in the proposed DTC control strategy, this paper exhibits a comparative assessment of four speed regulation methods: classical proportional and integral (PI) regulator, fuzzy logic PI controller, particle swarm optimization PI controller and backstepping regulator. The entire control algorithm was tested under different disturbances such as stator resistance and load torque variations.

It was ascertained that the IM, controlled with three-level inverter, exhibits good performances under the proposed DTC-SVM strategy based on a sliding-mode observer. The robustness of the suggested approach against parameter variations is also proved.

The theoretical development of the proposed control strategy is thoroughly described. Then, simulations using Matlab/Simulink software are launched to investigate the merits of the sensorless DTC-SVM command of three-level inverter-fed IM drive with different speed regulators.

This paper aims to explain how companies in the region of Arab countries respond to the institutional diffusion of a new communication genre like corporate social responsibility (CSR) reports.

Analysis of the features, content and language of CSR reports published by listed companies in the region, to classify the genres of these reports and infer results about ways of companies’ interaction with newly institutionalized genre.

Three distinct genres are identified: “sustainability reports genre,” “professional CSR report genre” and “light CSR report genre.” When companies interact with institutionally diffused genres, they either adopt them and re-enforce their distinctiveness, mix them with elements from other genres so their distinctiveness will be diluted, or produce the old and established genres under the new name so the new genre will lose its distinctiveness.

The proposed classification of CSR report genres and ways of companies’ interaction with new genres are original and open new horizons for research in social and environmental accounting and corporate communication fields.

This research serves to determine causal configurations of corporate social responsibility (CSR) conditions that best influences grassroots football club stakeholders to meet a sponsor's goals through promotional activity.

The research uses a case study of the Essex Alliance League, a local amateur football league in England. Firstly, semi-structured interviews were held with multiple stakeholders to understand the ecosystem of grassroots football. From here, further semi-structured interviews were held with club sponsors to identify the conditions of CSR. This allowed the research to then issue a survey from which results were analysed and discussed using fuzzy set Qualitative Comparative Analysis (fsQCA).

The ecosystem of grassroots football is formed by a myriad of stakeholders operating at a national level, all the way to more local governance structures within which the business-club relationship exists. Sponsors identified three main conditions of CSR: shared values, self-congruity, and happiness. However, following fsQCA, two pathways were found: (1) presence of shared values, and (2) presence of happiness with the absence of self-congruity.

For practitioners, adaptations can be made for clubs to attract and maintain sponsorship as businesses seek to use grassroots sport as a channel for their own CSR objectives. To attract long term sponsorship, club managers are recommended to maintain long-term relationships with business owners especially in relation to personal values, fit, and happiness. As such, the responsibility of the club to ensure its stakeholders engage in promotional activity on behalf of their sponsor will help in maximising the financial value over multiple seasons.

Where fertile ground for academic analysis in grassroots football is present, this research investigates CSR activity at this level of football, where most research is more concerned with professional levels of the game. Furthermore, this research reaches into the sport ecosystem through an understanding of co-created values between organisations in this exchange of shared values to meet common objectives.

The primary objective of this paper is to show a systematic and methodological approach for the digitalization of critical clinical pathways (CPs) within the healthcare domain.

The methodology entails the integration of service design (SD) and action research (AR) methodologies, characterized by iterative phases that systematically alternate between action and reflective processes, fostering cycles of change and learning. Within this framework, stakeholders are engaged through semi-structured interviews, while the existing and envisioned processes are delineated and represented using BPMN 2.0. These methodological steps emphasize the development of an autonomous, patient-centric web application alongside the implementation of an adaptable and patient-oriented scheduling system. Also, business processes simulation is employed to measure key performance indicators of processes and test for potential improvements. This method is implemented in the context of the CP addressing transient loss of consciousness (TLOC), within a publicly funded hospital setting.

The methodology integrating SD and AR enables the detection of pivotal bottlenecks within diagnostic CPs and proposes optimal corrective measures to ensure uninterrupted patient care, all the while advancing the digitalization of diagnostic CP management. This study contributes to theoretical discussions by emphasizing the criticality of process optimization, the transformative potential of digitalization in healthcare and the paramount importance of user-centric design principles, and offers valuable insights into healthcare management implications.

The study’s relevance lies in its ability to enhance healthcare practices without necessitating disruptive and resource-intensive process overhauls. This pragmatic approach aligns with the imperative for healthcare organizations to improve their operations efficiently and cost-effectively, making the study’s findings relevant.

This paper aims to propose and provide an overview of a model analysis that considers the main spatial design attributes that influence and produce the most relevant salutogenic outcomes. These results are essential for a healthy work experience, especially in shared workspaces.

This study departs from the theoretical contributions of the salutogenic approach, principles from supportive design theory, psychosocial supportive design and the environmental demands and resources model. After a scoping literature review covering different fields of workspace design, environmental psychology and evidence-based design of health-care facilities, a conceptual analysis is done on a proposed understanding of work, health and environmental relations to overview spatial attributes that enhance specific salutogenic and well-being-promoting outcomes needed for a healthy work experience.

The model of analysis, as a theoretical element that helps create methodological tools, combined with the application of a post occupancy evaluation, is thought to assist architects, designers, workspace owners and stakeholders in their new designs or to evaluate existing ones.

Studies on defining spatial attributes and their intended salutogenic outcomes have been formally done in health-care facilities. However, applying this idea to shared workspaces is something new and is expected to contribute to their design and evaluation, especially if the notion of environmental demands and resources is complemented.

The review examines the existing literature on blockchain-based small and medium enterprise (SME) finance and highlights its trend, themes, opportunities and challenges. Based on these factors, the authors create a framework for the existing literature on blockchain-based SME financing and lay down future research paths.

The review follows a systematic approach. It includes 53 articles encompassing multiple dimensions of blockchain-based SME finance, including peer-to-peer lending platforms, supply chain finance (SCF), decentralized lending protocols and tokenization of assets. The review critically evaluates these approaches' theoretical underpinnings, empirical evidence and practical implementations.

The review demonstrates that blockchain-based SME finance holds significant promise in addressing the credit gap by leveraging blockchain technology's decentralized and transparent nature. Benefits identified include reduced information asymmetry, improved access to financing, enhanced credit assessment processes and increased financial inclusion. However, the literature acknowledges several challenges and limitations, such as regulatory uncertainties, scalability issues, operational complexities and potential security risks.

The article contributes to the growing knowledge of blockchain-based SME finance by synthesizing and evaluating the existing literature. It also provides a framework for the existing literature in the area and future research paths. The study offers insights for researchers, policymakers and practitioners seeking to understand the potential of blockchain technology in filling the SME credit gap and fostering economic development through improved access to finance for SMEs.

Critiques of international business (IB) have long pointed to the weaknesses in the understanding of context. This has ignited debate on the understanding of institutions and how they “matter” for IB. Yet how institutions matter ultimately depends on how IB applies institutional theory. It is argued that institutional-based research is dominated by a narrow set of approaches, largely overlooking institutional perspectives that account for institutional diversity. This paper aims to forward the argument that IB research should lend greater attention to comparing the topography of institutional configurations by bringing political economy “back in” to the IB domain.

Using principal components analysis and hierarchical cluster analysis, the authors provide IB with a taxonomy of capitalist institutional diversity which defines the landscape of political economies.

The authors show institutional diversity is characterised by a range of capitalist clusters and configuration arrangements, identifying four clusters with distinct modes of capitalism as well as specifying intra-cluster differences to propose nine varieties of capitalism. This paper allows IB scholars to lend closer attention to the institutional context within which firms operate. If the configurations of institutions “matter” for IB scholarship, then clearly, a quantitative blueprint to assess institutional diversity remains central to the momentum of such “institutional turn.”

This paper provides a comprehensive survey of institutional theory, serving as a valuable resource for the application of context within international business. Further, our taxonomy allows international business scholars to utilise a robust framework to examine the diverse institutional context within which firms operate, whilst extending to support the analysis of broader socioeconomic outcomes. This taxonomy therefore allows international business scholars to utilise a robust framework to examine the institutional context within which firms operate.

Administrative processes play a crucial role in various sectors, often contributing to cost overruns and delays. While lean concept has been extensively applied in many industries, there is a recognized need for further research on the integration of lean in administrative processes. To address this research gap, this study aims to systematically analyse the implementation of lean in administrative processes, providing a sector-wise comparison to explore its prospects for the construction industry.

A systematic literature review was conducted by adapting the Preferred Reporting Items for Systematic Reviews and Meta-Analyses method. Eighty-six research papers are subjected to descriptive and content analysis on different tools applied in lean integrated administrative processes in health care, education, public administration and other sectors.

The research study reveals common lean tools irrespective of sector. Moreover, specific tools used for a particular sector are analysed. Out of the various lean tools and techniques, value stream mapping, 5S and Kaizen are highly acknowledged tools in every sector of lean intervention. Furthermore, ECRS is applied explicitly in the education sector. Furthermore, it is noted that Suppliers, Inputs, Process, Outputs and Customers (SIPOC), 5whys, load levelling and control charts are identical to administrative processes in lean health care. Furthermore, Spaghetti charts and Kaikaku are only adapted to administrative processes in the public administration sector, and causal loop diagrams are used explicitly in administrative processes in the construction sector.

This study contributes to research by developing a guideline to design lean intervention for a lean-integrated administrative process in any sector which still needs to be transformed into lean. Hence, this study will be a cornerstone for incorporating lean principles for administrative processes in construction sector.

This study aims to examine the blockchain landscape in supply chain management by drawing insights from academic and industry literature. It identifies the key drivers, categorizes the products involved and highlights the business values achieved by early adopters of blockchain technology within the supply chain domain. Additionally, it explores fingerprinting techniques to establish a robust connection between physical products and the blockchain ledger.

The authors combined the interpretive sensemaking systematic literature review to offer insights into how organizations interpreted their business challenges and adopted blockchain technology in their specific supply chain context; content analysis (using Leximancer automated text mining software) for concept mapping visualization, facilitating the identification of key themes, trends and relationships, and qualitative thematic analysis (NVivo) for data organization, coding and enhancing the depth and efficiency of analysis.

The findings highlight the transformative potential of blockchain technology and offer valuable insights into its implementation in optimizing supply chain operations. Furthermore, it emphasizes the importance of product provenance information to consumers, with blockchain technology offering certainty and increasing customer loyalty toward brands that prioritize transparency.

This research has several limitations that should be acknowledged. First, there is a possibility that some relevant investigations may have been missed or omitted, which could impact the findings. In addition, the limited availability of literature on blockchain adoption in supply chains may restrict the scope of the conclusions. The evolving nature of blockchain adoption in supply chains also poses a limitation. As the technology is in its infancy, the authors expect that a rapidly emerging body of literature will provide more extensive evidence-based general conclusions in the future. Another limitation is the lack of information contrasting academic and industry research, which could have provided more balanced insights into the technology’s advancement. The authors attributed this limitation to the narrow collaborations between academia and industry in the field of blockchain for supply chain management.

Practitioners recognize the potential of blockchain in addressing industry-specific challenges, such as ensuring transparency and data provenance. Understanding the benefits achieved by early adopters can serve as a starting point for companies considering blockchain adoption. Blockchain technology can verify product origin, enable truthful certifications and comply with established standards, reinforcing trust among stakeholders and customers. Thus, implementing blockchain solutions can enhance brand reputation and consumer confidence by ensuring product authenticity and quality. Based on the results, companies can align their strategies and initiatives with their needs and expectations.

In essence, the integration of blockchain technology within supply chain provenance initiatives not only influences economic aspects but also brings substantial social impacts by reinforcing consumer trust, encouraging sustainable and ethical practices, combating product counterfeiting, empowering stakeholders and contributing to a more responsible, transparent and progressive socioeconomic environment.

This study consolidates current knowledge on blockchain’s capacity and identifies the specific drivers and business values associated with early blockchain adoption in supply chain provenance. Furthermore, it underscores the critical role of product fingerprinting techniques in supporting blockchain for supply chain provenance, facilitating more robust and efficient supply chain operations.