Search results

Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.

A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.

Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.

The study was conducted using limited number of volunteers for the wearer trials.

By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.

To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.

This chapter is dedicated to understanding the idea of international as a key notion to the development of globalisation and to promoting the rescaling of spaces and subjects in contemporary higher education. The author discusses the concept of scale as a performative device that activates the capacities of bodies. Instead of seeing scale as a naturalised and hierarchical structure of spatial distribution, the author understands it as an ensemble of discourses and practices that produce scalar effects. Globalisation uses scale to promote the idea that subjects would become ‘international’ by being linked to privileged spaces and bodies in the Global North. In this sense, globalisation is not merely about nodes where certain flows converge. Rather, the author understands it as the political conditions that control and constrain the space for certain flows to occur and not others. Using assemblage analysis, the author presents and analyses three scenes taken from his ethnographic records that have as a guiding line the materialisation of the international. These scenes report the experience of being a Latin American doctoral student attending a congress in the United States, a tense situation experienced at a Chilean university academic event, and the unpretentious manifestation of an elaborate idea of internationality from a personal experience of a trip to India. The results point to three elaborations of the international: an optimistic view of a shared world, a geopolitical internationality and the production of a global corporeality.

At the moment, in terms of both research and commercial products, smart shoe technology and applications seem not to attract the same magnitude of attention compared to smart garments and other smart wearables such as wrist watches and wrist bands. The purpose of this study is to fill this knowledge gap by discussing issues regarding smart shoe sensing technologies, smart shoe sensor placements, factors that affect sensor placements and finally the areas of smart shoe applications.

Through a review of relevant literature, this study first and foremost attempts to explain what constitutes a smart shoe and subsequently discusses the current trends in smart shoe applications. Discussed in this study are relevant sensing technologies, sensor placement and areas of smart shoe applications.

This study outlined 13 important areas of smart shoe applications. It also uncovered that majority of smart shoe functionality are physical activity tracking, health rehabilitation and ambulation assistance for the blind. Also highlighted in this review are some of the bottlenecks of smart shoe development.

To the best of the authors’ knowledge, this is the first comprehensive review paper focused on smart shoe applications, and therefore serves as an apt reference for researchers within the field of smart footwear.

The purpose of this study is to highlight and demonstrate how the study of stress and related responses in construction can best be measured and benchmarked effectively.

A range of perceptual and physiological measures are obtained across different time periods and during different activities in a fieldwork setting. Differences in the empirical results are analysed and implications for future studies of stress discussed.

The results of this study strongly support the use of multiple psychometrics and biosensors whenever biometrics are included in the study of stress. Perceptual, physiological and environmental factors are all shown to act in concert to impact stress. Strong conclusions on the potential drivers of stress should then only be considered when consistent results apply across multiple metrics, time periods and activities.

Stress is an incredibly complex condition. This study demonstrates why many current applications of biosensors to study stress in construction are not up to the task and provides empirical evidence on how future studies can be significantly improved.

To the best of the author’s knowledge, this is the first study to focus explicitly on demonstrating the need for multiple research instruments and settings when studying stress or related conditions in construction.

In recent years, there has been significant interest in adopting XR (extended reality) technologies such as VR (virtual reality) and AR (augmented reality), particularly in retail. However, extending activities through reality-mediation is still mostly believed to offer an inferior experience due to their shortcomings in usability, wearability, graphical fidelity, etc. This study aims to address the research gap by experimentally examining the acceptance of metaverse shopping.

This study conducts a 2 (VR: with vs. without) × 2 (AR: with vs. without) between-subjects laboratory experiment involving 157 participants in simulated daily shopping environments. This study builds a physical brick-and-mortar store at the campus and stocked it with approximately 600 products with accompanying product information and pricing. The XR devices and a 3D laser scanner were used in constructing the three XR shopping conditions.

Results indicate that XR can offer an experience comparable to, or even surpassing, traditional shopping in terms of its instrumental and hedonic aspects, regardless of a slightly reduced perception of usability. AR negatively affected perceived ease of use, while VR significantly increased perceived enjoyment. It is surprising that the lower perceived ease of use appeared to be disconnected from the attitude toward metaverse shopping.

This study provides important experimental evidence on the acceptance of XR shopping, and the finding that low perceived ease of use may not always be detrimental adds to the theory of technology adoption as a whole. Additionally, it provides an important reference point for future randomized controlled studies exploring the effects of technology on adoption.

The purpose of this paper is to understand how those involved in executive pay determination in large publicly quoted UK businesses see the role of diversity within remuneration committees (Remcos) as enabling the input of different perspectives, which can enhance their decision-making and potentially improve pay outcomes.

Qualitative, semi-structured interviews were undertaken with 18 high-profile major-enterprise decision-makers and their advisers, i.e. non-executive directors (NEDs) serving Remcos, institutional investors, executive pay consultants and internal human resources (HR) reward specialists, together with data from three focus groups with 10 further reward management practitioners.

Remco members recognise the benefits of social category/demographic diversity but say the likelihood of increasing this is low, given talent pipeline issues. The widening of value diversity is considered problematic for Remcos’ functioning. Informational diversity is used as a proxy for social category/demographic diversity to improve Remcos’ decision-making on executive pay. While the inclusion of members from wider social networks is recognised as potentially bringing a different informational perspective, the social character of Remcos, reflecting their elite nature and experience of wealth, appears ingrained.

Our original contribution is to extend the application of upper echelons theory in the context of Remco decision-making to explain why members do not welcome widening informational diversity by appointing people from different social networks who lack value similarity. Instead, by drawing views from employees, HR acts as a proxy for social network informational diversity. The elite, upper-echelons nature of Remco appointments remains unchanged and team functioning is not disrupted.

The number of people with special needs, including citizens and military personnel, has increased as a result of terrorist attacks and challenging conditions in Iraq and other countries. With almost 80% of the world’s amputees having below-the-knee amputations, Iraq has become a global leader in the population of amputees. Important components found in lower limb prostheses include the socket, pylon (shank), prosthetic foot and connections.

There are two types of prosthetic feet: articulated and nonarticulated. The solid ankle cushion heel foot is the nonarticulated foot that is most frequently used. The goal of this study is to use a composite filament to create a revolutionary prosthetic foot that will last longer, have better dorsiflexion and be more stable and comfortable for the user. The current study, in addition to pure polylactic acid (PLA) filament, 3D prints test items using a variety of composite filaments, such as PLA/wood, PLA/carbon fiber and PLA/marble, to accomplish this goal. The experimental step entails mechanical testing of the samples, which includes tensile testing and hardness evaluation, and material characterization by scanning electron microscopy-energy dispersive spectrometer analysis. The study also presents a novel design for the nonarticulated foot that was produced with SOLIDWORKS and put through ANSYS analysis. Three types of feet are produced using PLA, PLA/marble and carbon-covered PLA/marble materials. Furthermore, the manufactured prosthetic foot undergoes testing for dorsiflexion and fatigue.

The findings reveal that the newly designed prosthetic foot using carbon fiber-covered PLA/marble material surpasses the PLA and PLA/marble foot in terms of performance, cost-effectiveness and weight.

To the best of the author’s knowledge, this is the first study to use composite filaments not previously used, such as PLA/wood, PLA/carbon fiber and PLA/marble, to design and produce a new prosthetic foot with a longer lifespan, improved dorsiflexion, greater stability and enhanced comfort for the patient. Beside the experimental work, a numerical technique specifically the finite element method, is used to assess the mechanical behavior of the newly designed foot structure.

Developments regarding the use of artificial intelligence (AI) in transportation systems, one of the important stakeholders of tourism, are remarkable. However, no review thus far has provided a comprehensive overview of research on AI in transportation systems.

To fill this gap, this study uses the VOSviewer software to present a bibliometric review of the current scientific literature in the field of AI-related tourism research. The theme of AI in transportation systems was explored in the Web of Science database.

The original search yielded 642 documents, which were then filtered by parameters. For publications related to AI in transportation systems, the most cited documents, leading authors, productive countries, co-occurrence analysis of keywords and bibliographic matching of documents were examined. This report shows that there has been a recent increase in research on AI in transport systems. However, there is only one study on tourism. The country that contributed the most is China with 298 studies. The most used keyword in the documents was intelligent transportation system.

The bibliometric analysis of the existing work provided a valuable and seminal reference for researchers and practitioners in AI-related in transportation system.

This chapter examines the concepts of race and racism, critically reviewing their historical and contemporary applications in everyday life as well as in academic and policy debates. Racism has been extensively researched, with various theories and conceptualisations developed across social science. However, there is a great deal of disagreement regarding its nature, contemporary significance and empirical validation. This chapter examines these and attempts to synthesise some of the common definitions of racism provided in the literature. It explores related concepts and underlying themes pertaining to expressions of race and racism. Furthermore, it unpacks current knowledge about racial issues and discusses recent advances in the conceptual understanding of various forms of racism. It also elucidates the social, political and analytical applications of racism as a concept and the significance of racism in contemporary societies. The chapter concludes by highlighting how racism is a dynamic phenomenon, continuously evolving with the social, political and technological transformations in contemporary societies.