Search results

Construction organizations must maintain a productive workforce without sacrificing their health and safety. The global construction sector loses billions of dollars yearly to poor health and safety practices. This study aims to investigate benefits derivable from using wearable technologies to improve construction health and safety. The study also reports the challenges associated with adopting wearable technologies.

The study adopted a quantitative design, administering close-ended questions to professionals in the Nigerian construction industry. The research data were analysed using descriptive and inferential statistics.

The study found that the critical areas construction organizations can benefit from using WSDs include slips and trips, sensing environmental concerns, collision avoidance, falling from a high level and electrocution. However, key barriers preventing the organizations from adopting wearable technologies are related to cost, technology and human factors.

The time and cost lost to H&S incidents in the Nigerian construction sector can be reduced by implementing the report of this study.

Studies on WSDs have continued to increase in developed countries, but Nigeria is yet to experience a leap in the research area. This study provides insights into the Nigerian reality to provide directions for practice and theory.

Following the imperative for human-centric digital innovation brought by the paradigm of Industry 5.0, the article aims to integrate the dispersed and multi-disciplinary literature on individual risks for workers to define, explain and predict individual risks related to Industry 4.0 technologies.

The paper follows the question, “What is the current knowledge and evidence base concerning risks related to Industry 4.0 technologies, and how can this inform digital innovation management in the manufacturing sector through the lens of the Industry 5.0 paradigm?” and uses the method of systematic literature review to identify and discuss potential risks for individuals associated with digital innovation. N = 51 contributions met the inclusion criteria.

The literature review indicates dominant trends and significant gaps in understanding risks from a human-centric perspective. The paper identifies individual risks, their interplay with different technologies and their antecedents at the social, organizational and individual levels. Despite this, the paper shows how the literature concentrates in studying risks on only a limited number of categories and/or concepts. Moreover, there is a lack of consensus in the theoretical and conceptual frameworks. The paper concludes by illustrating an initial understanding of digital innovation via a human-centered perspective on psychological risks.

Findings yield practical implications. In investing in the adoption, generation or recombination of new digital technologies in organizations, the paper recommends managers ensure to prevent risks at the individual level. Accordingly, the study’s findings can be used as a common starting point for extending the repertoire of managerial practices and interventions and realizing human-centric innovation.

Following the paradigm of Industry 5.0, the paper offers a holistic view of risks that incorporates the central role of the worker as crucial to the success of digital innovation. This human-centric perspective serves to inform the managerial field about important factors in risk management that can result in more effective targeted interventions in risk mitigation approaches. Lastly, it can serve to reinterpret digital innovation management and propose future avenues of research on risk.

This pragmatic research paper aims to unravel the smart vision-based method (SVBM), an AI program to correlate the computer vision (recorded and live videos using mobile and embedded cameras) that aids in manual lifting human pose deduction, analysis and training in the construction sector.

Using a pragmatic approach combined with the literature review, this study discusses the SVBM. The research method includes a literature review followed by a pragmatic approach and lab validation of the acquired data. Adopting the practical approach, the authors of this article developed an SVBM, an AI program to correlate computer vision (recorded and live videos using mobile and embedded cameras).

Results show that SVBM observes the relevant events without additional attachments to the human body and compares them with the standard axis to identify abnormal postures using mobile and other cameras. Angles of critical nodal points are projected through human pose detection and calculating body part movement angles using a novel software program and mobile application. The SVBM demonstrates its ability to data capture and analysis in real-time and offline using videos recorded earlier and is validated for program coding and results repeatability.

Literature review methodology limitations include not keeping in phase with the most updated field knowledge. This limitation is offset by choosing the range for literature review within the last two decades. This literature review may not have captured all published articles because the restriction of database access and search was based only on English. Also, the authors may have omitted fruitful articles hiding in a less popular journal. These limitations are acknowledged. The critical limitation is that the trust, privacy and psychological issues are not addressed in SVBM, which is recognised. However, the benefits of SVBM naturally offset this limitation to being adopted practically.

The theoretical and practical implications include customised and individualistic prediction and preventing most posture-related hazardous behaviours before a critical injury happens. The theoretical implications include mimicking the human pose and lab-based analysis without attaching sensors that naturally alter the working poses. SVBM would help researchers develop more accurate data and theoretical models close to actuals.

By using SVBM, the possibility of early deduction and prevention of musculoskeletal disorders is high; the social implications include the benefits of being a healthier society and health concerned construction sector.

Human pose detection, especially joint angle calculation in a work environment, is crucial to early deduction of muscoloskeletal disorders. Conventional digital technology-based methods to detect pose flaws focus on location information from wearables and laboratory-controlled motion sensors. For the first time, this paper presents novel computer vision (recorded and live videos using mobile and embedded cameras) and digital image-related deep learning methods without attachment to the human body for manual handling pose deduction and analysis of angles, neckline and torso line in an actual construction work environment.

The purpose of this paper investigates dynamic ease distributions of clothes at bust and waist lines with different body surface angle by using a Qualisys three-dimensional motion capture system (3DMCS).

The current method first obtain the specific markers of participants and their clothes along the bust and waist lines through 3DMCS, then using the least square method and four piecewise polynomial fitting participants and their clothes' bust and waist curves. The coordinates of the markers were tracked by the 3DMCS, while the participants under different body surface angle walked on a treadmill calculated the distances of markers coordinates to the participants' bust and waist curves. Finally, the data of samples were analyzed. It was found that the dynamic ease distributions showed different patterns at different body surface angle.

The results revealed the bust convex angle is 26.53 degrees (Specification:X3) and back slope angle is 13.96 degrees (Specification: Y1), the fluctuation of participant ease distributions on bust section was most obvious, and the maximum fluctuation value was ±20 mm and ±25 mm. The ease distributions of participant waist section fluctuated most obviously when the bust convex angle is 28.10 degrees (Specification: X5) and the back slope angle is 13.96 degrees (Specification: Y1), and the maximum fluctuation was ±30 mm and ±20 mm. The bust convex angle has the greatest influence on 1# garment, and the back slope angle has the greatest influence on 2# garment.

Currently, there is little information in the literature about dynamic ease distributions of garment on a different body types. This paper takes different body surface angles as the research objects to analyze the ease distributions of different clothes, the conclusion can provide reference data for 3D garment modeling and improve the authenticity of virtual garment fitting.

The purpose of this paper is to test whether incorporating a 20-week Kundalini yoga programme into a residential home for children improves well-being outcomes.

This is a mixed methods feasibility study. Feasibility was assessed through recruitment and retention rates as well as participants’ self-report perceptions on social inclusion, mental health and well-being and through semi-structured interviews on the benefits of the study. Mutual recovery entailed that children in care (CIC), youth practitioners and management participated together in the Kundalini yoga sessions.

The study initially enrolled 100 per cent of CIC and 97 per cent (29/30) of eligible staff. Attendance was low with an average rate of four sessions per participant (SD=3.7, range 0-13). All the participants reported that the study was personally meaningful and experienced both individual (e.g. feeling more relaxed) and social benefits (e.g. feeling more open and positive). Pre- and post-yoga questionnaires did not show any significant effects. Low attendance was associated with the challenges faced by the children’s workforce (e.g. high levels of stress, low status, profile and pay) and insufficient consultation and early involvement of stakeholders on the study implementation process.

Because of the chosen research approach (i.e. feasibility study) and low attendance rate, the research results may lack generalisability. Therefore, further research with larger samples including a control or comparison group to pilot similar research questions is mandatory.

This study has generated a number of valuable guiding principles and recommendations that might underpin the development of any future intervention for CIC and staff working in children’s homes.

The concept of togetherness and mutuality within residential spaces is discussed in the paper.

The effects of Kundalini yoga have not been reported before in any peer-review publications. This paper fulfils an identified need (i.e. poor outcomes among CIC and residential staff) and shows how movement and creative practices can support the concept of mutual recovery.

Schizophrenia is a serious psychiatric disorder characterized by positive symptoms, negative symptoms and neurocognitive deficits. The aim of this study was to estimate relationships between wellness, yoga and quality of life in patients affected by schizophrenia spectrum disorders. Participants were 30 patients with a diagnosis of schizophrenia in care at the Rehabilitative Psychiatry and Research Villa Chiara Clinic in Mascalucia (Catania, Italy), after that randomly assigned to two groups. The first group followed the experimental treatment with sets of yoga exercises conducted by a yoga trainer and a psychiatrist or a clinical psychologist expert in yoga, while a second control group was treated with usual care. The results revealed a significant difference, before and after treatment, between the experimental group and the control group in quality of life.

The future construction site will be pervasive, context aware and embedded with intelligence. The purpose of this paper is to explore and define the concept of the digital skin of the future smart construction site.

The paper provides a systematic and hierarchical classification of 114 articles from both industry and academia on the digital skin concept and evaluates them. The hierarchical classification is based on application areas relevant to construction, such as augmented reality, building information model-based visualisation, labour tracking, supply chain tracking, safety management, mobile equipment tracking and schedule and progress monitoring. Evaluations of the research papers were conducted based on three pillars: validation of technological feasibility, onsite application and user acceptance testing.

Technologies learned about in the literature review enabled the envisaging of the pervasive construction site of the future. The paper presents scenarios for the future context-aware construction site, including the construction worker, construction procurement management and future real-time safety management systems.

Based on the gaps identified by the review in the body of knowledge and on a broader analysis of technology diffusion, the paper highlights the research challenges to be overcome in the advent of digital skin. The paper recommends that researchers follow a coherent process for smart technology design, development and implementation in order to achieve this vision for the construction industry.

The purpose of this paper is to expand current knowledge about the recent trend of wearable technology to assess both its potential in the work environment and the challenges concerning the utilisation of wearables in the workplace.

After establishing exclusion and inclusion criteria, an independent systematic search of the ACM Digital Library, IEEE Xplore, ScienceDirect and Web of Science databases for relevant studies was performed. Out of a total of 359 articles, 34 met the selection criteria.

This review identifies 23 categories of wearable devices. Further categorisation of the devices based on their utilisation shows they can be used in the work environment for activities including monitoring, augmenting, assisting, delivering and tracking. The review reveals that wearable technology has the potential to increase work efficiency among employees, improve workers’ physical well-being and reduce work-related injuries. However, the review also reveals that technological, social, policy and economic challenges related to the use of wearable devices remain.

Many studies have investigated the benefits of wearable devices for personal use, but information about the use of wearables in the work environment is limited. Further research is required in the fields of technology, social challenges, organisation strategies, policies and economics to enhance the adoption rate of wearable devices in work environments.

Previous studies indicate that occupational stress and injuries are detrimental to employees’ health; this paper analyses the use of wearable devices as an intervention method to monitor or prevent these problems. Introducing a categorisation framework during implementation may help identify which types of device categories are suitable and could be beneficial for specific utilisation purposes, facilitating the adoption of wearable devices in the workplace.

The purpose of this study is to examine the role of videoconferencing technologies for mediating and transforming emotional experiences in virtual context.

Drawing on empirical data of video conferencing experiences, this study identifies different constitutive relations with technology through which actors cope with actual or potential anxieties in virtual meetings. It draws on the phenomenological-existential tradition (Sartre and Merleau-Ponty) and on an interpretive phenomenological analysis (IPA) to conceptualize and illustrate the role of affective affordances in virtual settings.

The study identifies four different body–technology–other relations that provide different action possibilities, both disclosing and concealing, for navigating emotional experiences in virtual encounters of mutual gazing. These findings offer insights into the anatomy of virtual emotions and provide explanations on the nature of Zoom fatigue (interactive exhaustion) and heightened feelings of self-consciousness resulting from video conferencing interactions.

This paper builds on and extends current scholarship on technological affordances, as well as emotions, to suggest that technologies also afford different tactics for navigating emotional experiences. Thus, this paper proposes the notion of affective affordance that can expand current information system (IS) and organization studies (OS) scholarship in important ways. The focus is on videoconference technologies and meetings that have received little research attention and even less so from a perspective on emotions. Importantly, the paper offers nuanced insights that can advance current research discourse on the relationships between technology, human body and emotions.

Breast-cancer-related lymphedema (BCRL) is a negative condition that affects biopsychosocial aspects of patients treated with breast cancer. Yoga has been reported as one of the complementary and alternative approaches used by patients diagnosed with BCRL. The aim of this systematic review was to explore the effectiveness of yoga on BCRL.

A systematic literature was performed by searching existing papers from the electronic scientific databases. Five papers were exclusively examined. Four studies were conducted in women with BCRL, and one study was conducted with women at risk for BCRL.

Four types of yoga were evaluated in relationship with BCRL, namely: the Satyananda Yoga tradition, the modified Hatha yoga, the aerobic yoga training and the Ashtanga-based yoga practices. Four of five included studies reported that decrease in arm volume was not reported for all yoga-type interventions. One study showed no significant evidence that yoga was associated with limb volume change in women at risk of BCRL. Similarly, three studies reported that the change-of-arm-volume measures were not significantly different between the yoga and the control groups or in the same group before and after the yoga program. One quasi-experimental study reported arm volume significantly decreased after attending the yoga program.

This review reported the importance of being aware that yoga is not shown to be an effective strategy for managing or preventing BCRL. However, quality of research methodology, small sample sizes and the limited number of related studies should be acknowledged. Until more rigorous studies are performed, yoga may continue to be used as a complement to traditional therapy under the supervision of certified trainers.