Search results

Sizing system is a fundamental topic in garment fitting. The purpose of this study was to assess the fit of existing police uniforms (shirt, jacket, overcoat and trousers) and develop a sizing system for upper and lower body uniforms of Amhara policemen in Ethiopia.

In total, 35 body dimensions of 889 policemen were taken through a manual anthropometric survey following the procedures in ISO 8559:1989 after each subject was interviewed on issues related to garment fit. The anthropometric data were pre-processed, key body dimensions were identified by principal components analysis and body types were clustered by the agglomerative hierarchical clustering algorithm and verified by the XGBoost classifier in a Python programming environment. The developed size charts were validated statistically using aggregate loss and accommodation rate.

About 44% of the subjects encountered fit problems every time they own new readymade uniforms. Lengths and side seams of shirts, and lengths and waist girths of trousers are the most frequently altered garment sites. Analysis of the anthropometric measurements resulted in 13 and 15 sizes for the upper and lower bodies, respectively. Moreover, the comparison of the developed upper garment size chart with the existing size chart for a shirt showed a considerable difference. This indicates that inappropriate size charts create fit problems.

The study considers the analysis of fit problems and sizing system development in a less researched country. Moreover, the proposed data mining procedure and its application for size chart development is unique and workable.

This study aims to produce textile-like surfaces using fused deposition modelling (FDM) 3D printers and create a garment collection.

Experiments were conducted using different types of materials in FDM 3D printers until the sufficient flexibility was achieved to create textile-like structures. During the research, properties of polylactic acid (PLA), acrylonitrile butadiene styrene (ABS) and thermoplastic polyurethane (TPU) were observed. Geometrical patterns were printed and each of them gave a different result depending on the pattern. Based on the information obtained from the experiments, a garment collection with four total looks was designed inspired by Vivaldi’s “Four Seasons”.

Among the materials used, TPU, a flexible filament, yielded the best results. Because of the rigid properties of PLA and ABS, chain-like structures were printed to create relatively flexible surfaces, but the results were still not successful enough to create a clothing material. Therefore, TPU was preferred for the garment material selection.

In this study, combinations of 3D printed flexible structures and different types of fabrics were used to create a garment collection. It was concluded that, with the right material selection, 3D printing can be used as an alternative method to create a new aesthetic language in fashion design.

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

Exposure to poor indoor air in refurbished buildings is a matter of health concern due to the growing concentrations of various contaminants as a result of building airtightness without amendment of ventilation, or the use of building materials such as glue, paint, thinner and varnishes. Recent studies have been conducted to measure indoor air pollutants and assess the health risks affecting the quality of life, productivity and well-being of human beings. However, limited review studies have been recently conducted to provide an overview of the state of knowledge. This study aims to conduct a scoping review of indoor air quality (IAQ) in the context of refurbished or energy-retrofitted buildings.

A systematic screening process based on the PRISMA protocol was followed to extract relevant articles. Web of Science, Scopus, Google Scholar and PubMed were searched using customised search formulas. Among 276 potentially relevant records, 38 studies were included in the final review covering a period from 2015 to 2022.

Researchers mapped out the measured compounds in the selected studies and found that carbon dioxide (CO₂) (11%) and total volatile organic compounds (11%) were among the most commonly measured contaminants. Two trends of research were found including (1) the impact of ventilative properties on IAQ and (2) the impact of introducing building materials on IAQ.

The contribution of this study lies in summarising evidence on IAQ measurements in refurbished buildings, discussing recent advancements, revealing significant gaps and limitations, identifying the trends of research and drawing conclusions regarding future research directions on the topic.

3D printing has been warmly welcomed by clothing enterprises for its customization capacity in recent years. However, such clothing enterprises have to face the digital transformation challenges brought by 3D printing. Since the business model is a competitive weapon for modern enterprises, there is a research gap between business model innovation and digital transformation challenges for 3D-printing garment enterprises. The aim of the paper is to innovate a new business model for 3D-printing garment enterprises in digital transformation.

A business model innovation canvas (BMIC), a new method for business model innovation, is used to innovate a new 3D-printing clothing enterprises business model in the context of digital transformation. The business model canvas (BMC) method is adopted to illustrate the new business model. The business model ecosystem is used to design the operating architecture and mechanism of the new business model.

First, 3D-printing clothing enterprises are facing digital transformation, and they urgently need to innovate new business models. Second, mass customization and distributed manufacturing are important ways of solving the business model problems faced by 3D-printing clothing enterprises in the process of digital transformation. Third, BMIC has proven to be an effective tool for business model innovation.

The new mass deep customization-distributed manufacturing (MDC-DM) business model is universal. As such, it can provide an important theoretical reference for other scholars to study similar problems. The digital transformation background is taken into account in the process of business model innovation. Therefore, this is the first hybrid research that has been focused on 3D printing, garment enterprises, digital transformation and business model innovation. On the other hand, business model innovation is a type of exploratory research, which means that the MDC-DM business model’s application effect cannot be immediately observed and requires further verification in the future.

The new business model MDC-DM is not only applicable to 3D-printing garment enterprises but also to some other enterprises that are either using or will use 3D printing to enhance their core competitiveness.

A new business model, MDC-DM, is created through BMIC, which allows 3D-printing garment enterprises to meet the challenges of digital transformation. In addition, the original canvas of the MDC-DM business model is designed using BMC. Moreover, the ecosystem of the MDC-DM business model is constructed, and its operation mechanisms are comprehensively designed.

The purpose of this paper is to examine the factors that influence older adults' intention to use virtual fitting room technology during the COVID-19 pandemic based on the extended technology acceptance model (TAM).

An online survey was conducted with a sample of older adults from 60 to 90 years old (n = 819). A structural equation modeling was conducted to test a proposed research model.

The results revealed that older adults' behavioral intentions were positively influenced by perceived usefulness and ease of use, and fear of infection during the pandemic was significantly related to the perceived usefulness. Fit concern was not significantly related to perceived usefulness of virtual fitting room technology.

This research extends the TAM by adding antecedents to perceived usefulness in explaining older adults' adoption of virtual fitting technology.

This study aims to conduct an exploratory research to find out the evolving constructs and variables of digital literacy, as seen by researchers since its inception. This research also includes an empirical study to identify and further analyze the digital literacy dimensions of university students studying fashion design program in Kolkata, India.

The exploratory study is based on a review of extant literature, whereas the empirical study is carried out through a self-assessment survey based on UNESCOs Digital Literacy Global Framework competences after validating their relevance with respect to the fashion and apparel industry. A total of 120 university students studying four years Bachelor of Design (Fashion Design) program were asked to rate their digital literacy competences on a five-point Likert scale, with a self-reported truth response against each statement. The results were analyzed using multivariate statistical tools.

Based on UNESCO competences, it came out that there are eight digital literacy dimensions. ANOVA further confirms that the dimensions requiring higher-order cognition, such as “software management competence” and “digital citizenship competence,” increase with progress in the graduate program. However, lower-order competence dimensions remained unchanged over time.

The research instrument used for this empirical study, its identified dimensions and the fact that higher-order competence dimensions are enhanced with progression in university education may be helpful for similar research in other fashion-related programs.

Despite the potential of virtual fitting rooms (VFRs) to enhance the consumer experience, their adoption is in the preliminary stages. Little is known about inherent reasons why consumers would adopt VFRs. As consumers' attributional processes can be influenced by their enduring chronic traits, this study aims to investigate the influence of chronic regulatory focus on consumers' VFR adoptions via consumers' perceptions of value provided by VFRs. Additionally, the mediating effects of perceived functional and experiential values were examined. Further, the moderating effect of prior VFR experience was tested to allow for variations in consumer experiences.

Data were collected via an online survey of 480 consumers who have at least heard of VFRs via convenience sampling. Established measures were utilized to develop the survey questionnaire. Data were analysed using structural equation modelling to test the main model with mediation effects as well as multi-group comparisons to test the moderating effect.

Empirical results revealed that respective chronic regulatory foci, as preconceived factors that drive consumers' differences in processing, exerted significant influences on consumers' perceptions of VFRs, which, in turn, positively influenced their adoption intention. Also, perceived values mediated the relationship between regulatory foci and consumers' adoption intention. Further, prior VFR experience moderated the relationship between regulatory focus and perceived value.

The paper empirically tested the importance of chronic regulatory foci in understanding consumers' cognitive and affective attributional processes, explaining inherent psychological reasons why consumers would (not) adopt VFRs.

The study examined the personal information management (PIM) challenges encountered by faculty in six universities in Ghana, their information refinding experiences and the perceived role of memory. The study tested the hypothesis that faculty PIM performance will significantly differ when the differences in the influence of personal factors (age, gender and rank) on their memory are considered.

The study was guided by a sample survey design. A questionnaire designed based on themes extracted from earlier interviews was used to collect quantitative data from 235 faculty members from six universities in Ghana. Data analysis was undertaken with a discrete multivariate Generalized Linear Model to investigate how memory intermediates in the relationship between age, gender and rank, and, refinding of stored information.

The paper identified two subfunctions of refinding (Refinding 1 and Refinding 2) associated with self-confidence in information re-finding, and, memory (Memory 1 and Memory 2), associated with the use of complimentary frames to locate previously found and stored information. There were no significant multivariate effects for gender as a stand-alone variable. Males who were aged less than 39 could refind stored information irrespective of the memory class. Older faculty aged 40–49 who possess Memory 1 and senior lecturers who possess Memory 2 performed well in refinding information. There was a statistically significant effect of age and memory; and rank and memory.

This study was limited to faculty in Ghana, whereas the study itself has implications for demographic differences in PIM.

Identifying how memory mediates the role of personal factors in faculty refinding of stored information will be necessary for the efforts to understand and design systems and technologies for enhancing faculty capacity to find/refind stored information.

Understanding how human memory can be augmented by technology is a great PIM strategy, but understanding how human memory and personal factors interplay to affect PIM is more important.

PIM of faculty has been extensively examined in the literature, and limitations of memory has always been identified as a constraint. Human memory has been augmented with technology, although the outcome has been very minimal. This study shows that in addition to technology augmentation, personal factors interplay with human memory to affect PIM. Discrete multivariate Generalized Linear Model applied in this study is an innovative way of addressing the challenges of assimilating statistical methodologies in psychosocial disciplines.

The COVID-19 pandemic has caused significant mortality and morbidity worldwide. However, the role of dietary patterns as a potential risk factor for COVID-19 has not been well established, especially in studies with large samples. Therefore, this study aims to identify and evaluate the association between major dietary patterns and COVID-19 among adults from Iran.

In this cross-sectional study, the authors included 9,189 participants aged 20–70 who participated in the Yazd Health Study (YaHS) and Taghzieh Mardom-e-Yazd study (TAMIZ). They used factor analysis to extract dietary patterns based on a food frequency questionnaire (FFQ). Then, they assessed the relationship between these dietary patterns and the odds of COVID-19.

This study identified two major dietary patterns: “high protein and high fiber” and “transitional”. Participants in the highest tertile of the “high protein and high fiber” dietary pattern, which included vegetables, fruits, dairy and various kinds of meats such as red meat, fish and poultry, had a lower odds of COVID-19 compared with those in the lowest tertile. However, the “transitional” dietary pattern did not affect the risk of COVID-19.

In conclusion, a “high protein, high fiber” diet may lower the odds of COVID-19. This study suggests that dietary patterns may influence the severity and spread of future similar pandemics.