Search results

The purpose of this study is to investigate an objective method of evaluating the tactile comfort of blankets by a method of connecting the mechanical parameters of blankets to subjective evaluation. The two methods are preliminarily investigated as follows: (1) Transformation equations for the fabric hand of suiting, KN‐101‐W for primary hand values and KN‐301‐W for THV, are applied, with the mean and standard deviation applied to these equations replaced with new values for the blanket population. (2) A new prediction equation is constructed for deriving THV directly from the mechanical parameters and thermal properties. The prediction accuracy of method (2) is a little higher than that of (1). The durability of blankets during repeated use and repeated dry cleaning determined by the initial performance of blankets is also investigated.

We predict the compression properties of blankets from the blanket structure and the fiber bending property. This study applies to the theory developed originally for the compressive deformation of carpets by Kimura, Kawabata and Kawai in 1970 to blankets. As a result, we found that the initial compression properties of Mayor and New Mayor blankets could be predicted by the compression theory.

The purpose of this paper is fourfold: to experimentally determine the standby thermal energy losses in various hot water cylinders in both scenarios, without isotherm blanket installation and with isotherm blanket installation; to analytically evaluate the performance of either the geyser, split- or integrated-type ASHP water heaters based on the number of heating up cycles and total electrical energy consumptions over a 24-h period without isotherm blankets and with isotherm blankets installed; to demonstrate the impact of the electrical energy factors of the split- and integrated-type ASHP water heaters under both the scenarios (without and with the isotherm blankets installed); and to use statistical tests (one way ANOVA and multiple comparison procedure tests) to verify whether any significant difference in the standby thermal energy losses occurred for each of the heating devices under both the scenarios.

The methodology was divided into monitoring of the performance of the electrical energy consumptions and ambient conditions of the hot water heating technologies without isotherm blanket installation and with isotherm blanket installation.

The results reveal that the average standby thermal energy loss of the geyser without the installation of an isotherm blanket was 2.5 kWh. And this standby loss can be reduced to over 18.5 per cent by just installing a 40-mm thick isotherm blanket on the tank. The statistical tests show a significant mean difference in the group electrical energy consumed to compensate for the standby losses under both scenarios. In contrast, the average standby thermal energy losses for the split- and integrated-type ASHP water heaters were 1.33 kWh and 0.92 kWh, respectively. There was a reduction of 15.5 per cent and 3.5 per cent in the electrical energy consumed in compensating for standby losses for both the split and integrated types, respectively, but there was no significant mean difference in the standby losses under both scenarios for the two systems. Again, without any loss of generality, the electrical energy factor of both the ASHP water heaters decreased upon installation of the isotherm blanks.

The experiments were conducted only for a 150-L geyser and 150-L split- and integrated-type ASHP water heaters. The category of the different types of ASHP water heaters was limited to one because of the cost implication.

The experiments were not conducted with various hot water storage tanks installed in different positions (roof, inside or outside of a building wall, etc.) so that actual real-life observations could be obtained. The challenges of easy disassembling and deployment of systems and DAS to different positions were also a real concern.

The findings can help homeowners and ESCO in deciding whether to install isotherm blankets on storage tanks of ASHP water heaters on the basis of the impact of standby losses and its potential viability.

The experimental design and methodology are the first of its kind to be conducted in South Africa. The results and interpretation were obtained from original data collected from a set of experiments conducted. The findings also show that the installation of isotherm blanket on an electric geyser can result in a significant mean reduction in the standby losses. In contrast, an installation of the isotherm blankets on the storage tanks of ASHP water heaters can reduce the standby losses, but there exists no significant mean difference.

The purpose of this paper is to analyse the role of ecology-centred accounting for biodiversity in efforts to conserve biodiversity.

The paper examines a case study of biodiversity conservation efforts to restore a degraded blanket bog habitat. The analysis adopts a social nature perspective, which sees the social and the natural as inseparably intertwined in socio-ecological systems: complexes of relations between (human and non-human) actors, being perpetually produced by fluid interactions. Using a theoretical framework from the geography literature, consisting of four mutually constitutive dimensions of relations – territory, scale, network, and place (TSNP) – the analysis examines various forms of accounting for biodiversity that are centred on this blanket bog.

The analysis finds that various forms of ecology-centred accounting for biodiversity have rendered this blanket bog visible and comprehensible in multiple ways, so as to contribute towards making this biodiversity conservation thinkable and possible.

This paper brings theorising from geography, concerning the social nature perspective and the TSNP framework, into the study of accounting for biodiversity. This has enabled a novel analysis that reveals the productive force of ecology-centred accounting for biodiversity, and the role of such accounting in organising the world so as to produce socio-ecological systems that aid biodiversity conservation.

The rate and volume of air exchanged between the bed microclimate and the ambient environment determines in part how much heat is lost from the human body. This study investigated the ventilatory characteristics of infant over‐bedding to determine whether different combinations of bedding items (i.e. sheets, blankets, duvets) and types of tucking (i.e. loosely, firmly and swaddled/firmly tucked) affected microclimate ventilation. Microclimate volumes and air exchange rates were determined and used to calculate the ventilation indices. The presence of a duvet in the bedding combination resulted in lower ventilation indices than when bedding did not include a duvet. The type and combination of blankets did not significantly affect ventilation indices. The type of tucking had a significant effect on ventilation indices only when the assembly did not include a duvet.

The purpose of this paper is to reformulate the governing equations incorporating major variables and parameters for the design a Micro Air Vehicle (MAV), to meet the desired mission and design requirements.

Mathematical models for various spherical and cylindrical Coandă MAV configurations were rederived from first principles, and the performance measures were defined. To verify the theoretical prediction to a certain extent, a computational fluid dynamic (CFD) simulation for a Coandă MAV generic models was performed.

The major variables and parameters of Coandă MAV have been formulated into practical guidelines, which relate the lift (or thrust) produced for certain input variables, particularly the Coandă MAV jet momentum coefficient. The influences of the geometrical parameters are elaborated.

The present analysis on Coandă jet-configured MAV is focused on the lift generation due to the Coandă jet effect through a meticulous analysis. The effects of viscosity, the Coandă jet thickness, the radius of curvature of the surface and the stability of Coandă jet are not considered and will be the subject of the following work.

The results obtained can be used for sizing in the preliminary design of Coandă MAVs.

Physical and mathematical models were developed which can describe the physical phenomena of the flow field near the Coandă MAV surfaces influenced by Coandă jet sheets and for obtaining a relationship between relevant variables and parameters to the lift of practical interest.

The purpose of this paper is to present a novel approach on the process zone characterization for direct feedback regarding the state of vapour, in order to assure a better monitoring, control and understanding of the process.

Different pressure sensors were applied in an experimental vapour phase soldering (VPS) station, where the hardware setup was dedicated to the current experiments. Static and dynamic pressure values were analyzed and correlated with additional thermal measurements.

The results reveal the dynamics of the vapour blanket generation. The correlated measurements show different stages of the process initialization, highlighting better accuracy than sole temperature measurements of saturated vapour identification. It is possible to trace the height of the available saturated vapour blanket with static pressure measurements.

The VPS process may benefit from the more precise saturation detection, giving better control on the heat transfer, enabling more efficient production with the reduction of idle time, and resulting in better soldering quality.

Reducing the idle time of the VPS stations may result in better efficiency and smaller power consumption, reducing the environmental impact of the method.

The presented methods provide a completely novel approach from the aspect of process zone state variables and parameters characterization, focusing on pressure measurements.

SPUN glass, woven into thin blankets, is being used by the Glenn L. Martin Company, Baltimore, in the stretch forming of magnesium sheets as a successful substitute for other, less efficient materials.

The purpose of this study is to quantitatively evaluate five erosion control measures at a residential development area in Louisiana, USA in order to provide Best Management Practices (BMPs) that have been tested in the field with demonstrated cost‐effectiveness.

A total of six testing sites at a nine‐degree slope were used in parallel to study five erosion control measures with one being the control site (no protection). Soil erosion rate was quantified using the erosion bridge method. Soil underlying the study area was analyzed for surface runoff potential. Precipitation was monitored using a Sigma rain gauge. Analysis of variance (ANOVA) and Student Newman‐Keuls Post‐Hoc ANOVA analysis were conducted to evaluate statistical significance of erosion control effectiveness. Ratio of soil erosion rate reduction to cost of each control measure is also analyzed.

All erosion control measures studied were very effective in reducing soil erosion for soils with high runoff potential, ranging from 75 percent to about 100 percent reduction in soil erosion rate. The most effective soil erosion protection was observed by Geojute fabric and Curlex blanket with greater than 90 percent reduction in soil erosion rate. However, after factoring‐in cost, straw bedding was observed to be five times as cost‐effective as Geojute fabric and Curlex blanket. The most cost‐effective measure is temporary seeding using perennial rye grass. For each dollar spent, about 12 tons of soil per acre per year will be prevented from eroding.

The study evaluated erosion control measures in the field with quantitative cost‐effectiveness analyzed. Besides enforcement, providing practical and cost‐effectiveness control measures that have been tested in the field is critical for actual implementation of erosion control measures.

During plasma disruption events in tokamaks, a large amount of magnetic energy is associated to the transfer of plasma current in eddy currents into the passive structures. In the paper, the influence of the in‐vessel design, in terms of magnetic shielding and electrical insulation, on the magnitude and the flow pattern of the eddy currents is investigated.