Search results

This paper presents and investigates a method named M×N‐ary chaotic pulse‐width‐position modulation (CPWPM) which is based on the combination of M‐ary chaotic pulse‐position modulation (CPPM) and N‐ary chaotic pulse‐width modulation (CPWM) in order to provide a better performance in noise‐affected environments as well as improve significantly bit rate.

Analysis of schemes for modulator and demodulator are presented in detail through describing the schemes of the individual methods and their combination. Theoretical evaluation of bit‐error rate (BER) performance in presence of additive white Gaussian noise (AWGN) is provided. Chaotic behavior with tent map in variation of modulation parameters is also investigated. In order to verify the theoretical analyses, numerical simulations are carried out and their results are reported.

Both evaluation and simulation results show that when the number of symbols increases, the bit rate is improved significantly but the BER performance is just slightly worse. This makes M×N‐ary CPWPM become an effective method for chaos‐based digital communication.

Although CPPM, CPWM and M‐ary modulation methods have been described in the literature separately, their combination is presented and investigated for the first time in this paper.

This paper aims to the increasing need for high-speed low-power data transmissions over frequency-selective fading channels has drawn attention to suggest dual-carrier modulation (DCM) for multiband orthogonal frequency division multiplexing (OFDM) transceivers for ultra wideband (UWB) wireless personal area network (WPAN).

Under frequency-selective fading channel conditions, the decoder is not sufficient enough to decode the transmission bits of severely attenuated data tones. Hence, the authors suggest DCM for a multiband OFDM transceiver because of its multiple capability of providing both frequency diversity and coding gain. It also resulted in low bit-error-rate (BER) at a given signal- to-noise ratio when compared to conventional multiband OFDM system. To achieve an optimised BER, DCM transforms four re-ordered bits into two quaternary phase shift keying symbols and further transforms to two 16-quadrature amplitude modulation-like (16-QAM) symbols with a suitable mapping technique, and at the receiver end, they are decoded with maximum likelihood decision rule. After performing the transformation, the outage probability and average BER expressions are derived to analyse the system performance.

DCM is suitable for high data rate transmission and is immune to frequency-selective fading. The outage and BER performance outstands over conventional multiband OFDM transceiver because of the inclusion of DCM mapping.

It is widely used in WPANs such as high definition multimedia interface and wireless universal serial bus.

This paper derives novel closed-form outage probability and a tight upper bound on average BER expressions for DCM-based multiband OFDM UWB transceiver over frequency-selective Nakagami-m fading channels for any arbitrary value of m. For this, moment-generating function of sum of squared, independent and identically distributed (i.i.d.) Nakagami-m random variables are used. Further, the system performance is also validated for the case of exponential decaying power delay profile, and the simulation results are provided to check the accuracy of the derived expressions.

To enhance the performance transmit antenna selection (TAS) of spatial modulation (SM), systems technique needs to be essential. This TAS is an effective technique for reducing the multiple input multiple output (MIMO) systems computational difficulty, and bit error rate (BER) can increase remarkably by various TAS algorithms. But these selection methods cannot provide code gain, so it is essential to join the TAS with external code to obtain cy -ode gain advantages in BER.

In this paper, Bose–Chaudhuri–Hocquenghem (BCH)-Turbo code TC is combined with the orthogonal space time block code system.

In some existing work, the improved BER has been perceived by joining forward error correction code and space time block code (STBC) for MIMO systems provided greater code gain. The proposed work can provide increasing code gain and the effective advantages of the TAS-OSTBC system.

To perform the system analysis, Rayleigh channel is used. In the case with multiple TAS-OSTBC systems, better performance can provide by this new joint of the BCH-Turbo compared to the conventional Turbo code for the Rayleigh fading.

The purpose of this paper is to demonstrate a proficiency for accomplishing optimal CFO and keep down the error among the received and transmitted signal. Orthogonal frequency-division multiplexing (OFDM) is considered as an attractive modulation scheme that could be adopted in wireless communication systems owing to its reliability in opposition to multipath interruptions under different subchannels. Carrier frequency offset (CFO) establishes inter-carrier interference that devastates the orthogonality between the subcarriers and fluctuates the preferred signal and minimizes the effectual signal-to-noise ratio (SNR). This results in corrupted system performance. For sustaining the subcarriers’ orthogonality, timing errors and CFOs have to be approximated and sufficiently compensated for. Single carrier modulation (SCM) is a major feature for efficient OFDM system.

This paper introduces a novel superposition coded modulation-orthogonal frequency-division multiplexing (SCM-OFDM) system with optimal CFO estimation using advanced optimization algorithm. The effectiveness of SCM-OFDM is validated by correlating the transmitted and received signal. Hence, the primary objective of the current research work is to reduce the error among the transmitted and received signal. The received signal involves CFO, which has to be tuned properly to get the signal as closest as possible with transmitted signal. The optimization or tuning of CFO is done by improved grey wolf optimization (GWO) called GWO with self-adaptiveness (GWO-SA). Further, it carries the performance comparison of proposed model with state-of-the-art models with the analysis on bit error rate (BER) and mean square error (MSE), thus validating the system’s performance.

From the analysis, BER of the proposed and conventional schemes for CFO at 0.25 was determined, where the adopted scheme at 10th SNR was 99.6 per cent better than maximum likelihood, 99.6 per cent better than least mean square (LMS), 99.3 per cent better than particle swarm optimization (PSO), 75 per cent better than genetic algorithm (GA) and 25 per cent better than GWO algorithms. Moreover, MSE at 1st SNR, the proposed GWO-SA scheme, is 4.62 per cent better than LMS, 60.1 per cent better than PSO, 37.82 better than GA and 67.85 per cent better than GWO algorithms. Hence, it is confirmed that the performance of SCM-OFDM system with GWO-SA-based CFO estimation outperformed the state-of-the-art techniques.

This paper presents a technique for attaining optimal CFO and to minimize the error among the received and transmitted signal. This is the first work that uses GWO-SA for attaining optimal CFO.

The purpose of this paper is to provide a nondestructive monitoring method based on wireless sensor technology to measure the continuous circumferential film pressure on radial cross-section of water-lubricated bearing, in addition, to study the influence factors to wireless communication.

The unique shaft and wireless equipments are designed, the pressure sensors are installed in right shoulder of shaft, the wireless transmitter is installed at the end of shaft and the sensors are connected with wireless transmitter by data cable. By this way, the film pressure can be obtained via wireless communication. The film pressure of eight grooved water-lubricated rubber bearings with concave staves is measured, the performance evaluation of wireless equipments is conducted and the influence factors to wireless communication is analyzed by Doppler frequency shift theory.

The rupturing and nonuniform water film is observed, the grooves decrease the film pressure of rubber bearing which is in mixed lubricating state. The main influence factor to wireless communication is shaft speed which has greater effect on packet loss rate than that on bit error rate.

By studying the actual continuous water film pressure, the bearing properties can be studied in-depth, and this has significant meaning to the design and application of bearing. Moreover, the study on influence factors to wireless communication can be used for references to other wireless monitoring on rotating machinery.

The continuous water film pressure can be monitored by this method, the lubricating state of bearing working surface cannot be damaged and the signal attenuation can be avoided. Therefore, the measuring accuracy is promoted and the measuring process also becomes convenient and high efficiency.

In order to optimize BER and to substantiate performance measures, initially, the filter bank multicarrier (FBMC) quadrature amplitude modulation (QAM) performance metrics are evaluated with the cyclic prefix-orthogonal frequency division multiplexing (CP-OFDM) system. The efficiency of CP-OFDM, as well as FBMC/QAM that is transmitting over specific fading channels, is evaluated in terms of quality trade-off metrics over bit error rate (BER) as well as modulation order. When compared with the traditional FBMC systems, the proposed FBMC QAM system shows better performance. The performance metrics of FBMC/QAM with the inclusion of multiuser multiple-input-multiple-output (MUMIMO) is validated with worst case channel environment. The performance penalty gap that exists in CP- OFDM is compared with improved FBMC QAM in terms of both BER and OOB radiation measures. The BER trade off comparison between ML and MMSE optimally determine the prominent signal detection model for high performance FBMC QAM system.

The main objective of this research work is to provide perceptions about performance, co-channel interference avoidance as well as about the techniques that are used for minimizing the complexity of the system that is related to FBMC QAM structure for reducing intrinsic interference with higher spectral features as well as maximal likelihood (ML) detector systems.

This research work also looks at the efficiency of multiuser multiple-input-multiple-output (MU-MIMO) FBMC/QAM over nonlinear channels. Furthermore, when compared with OFDM, it also significantly reduces the penalty gap efficiency, thereby enabling the accessibility of the proposed FBMC QAM system from BER as well as implementation point of view. Finally, the signal detection is facilitated by the sub-detector and is achieved on the downlink side by making use of threshold-driven statistical measures that accurately minimize the complexity trade-off measures of the ML detector over modulation order. The computation of the proposed FBMC method’s BER performance measures was carried out through MATLAB simulation environments, as well as efficiency of the suggested work was demonstrated through detailed analyses.

This research work intend to combine the efficient MU-MIMO based transmission scheme with optimal FBMC/QAM for improved QoS over highly nonlinear channels which includes both delay spread and Doppler effects. And optimal signal detection model is facilitated at the downlink side by making use of threshold-driven statistical measures that accurately minimize the complexity trade-off measures of the ML detector over modulation order. The computation of the proposed FBMC method’s BER performance measures was carried out through MATLAB simulation environments, as well as efficiency of the suggested work was demonstrated through detailed analyses.

The suggested work examines the latest developments such as the techniques employed for allocation of power, browser techniques, modern analysis and bandwidth efficiency of nonorthogonal multiple accesses (NOMA) in the network of 5G. Furthermore, the proposed work also illustrates the performance of NOMA when it is combined with various techniques of wireless communication namely network coding, multiple-input multiple-output (MIMO), space-time coding, collective communications, as well as many more. In the case of the MIMO system, the proposed research work specifically deals with a less complex recursive linear minimum mean square error (LMMSE) multiuser detector along with NOMA (MIMO-NOMA); here the multiple-antenna base station (BS) and multiple single-antenna users interact with each other instantaneously. Although LMMSE is a linear detector with a low intricacy, it performs poorly in multiuser identification because of the incompatibility between LMMSE identification and multiuser decoding. Thus, to obtain a desirable iterative identification rate, the proposed research work presents matching constraints among the decoders and identifiers of MIMO-NOMA.

To improve the performance in 5G technologies as well as in cellular communication, the NOMA technique is employed and contemplated as one of the best methodologies for accessing radio. The above-stated technique offers several advantages such as enhanced spectrum performance in contrast to the high-capacity orthogonal multiple access (OMA) approach that is also known as orthogonal frequency division multiple access (OFDMA). Code and power domain are some of the categories of the NOMA technique. The suggested research work mainly concentrates on the technique of NOMA, which is based on the power domain. This approach correspondingly makes use of superposition coding (SC) as well as successive interference cancellation (SIC) at source and recipient. For the fifth-generation applications, the network-level, as well as user-experienced data rate prerequisites, are successfully illustrated by various researchers.

The suggested combined methodology such as MIMO-NOMA demonstrates a synchronized iterative LMMSE system that can accomplish the optimized efficiency of symmetric MIMO NOMA with several users. To transmit the information from sender to the receiver, hybrid methodologies are confined to 2 × 2 as well as 4 × 4 antenna arrays, and thereby parameters such as PAPR, BER, SNR are analyzed and efficiency for various modulation strategies such as BPSK and QAM_j (j should vary from 8,16,32,64) are computed.

The proposed hybrid MIMO-NOMA methodologies are synchronized in terms of iterative process for optimization of LMMSE that can accomplish the optimized efficiency of symmetric for several users under different noisy conditions. From the obtained simulated results, it is found, there are 18%, 23% 16%, and 8% improvement in terms of Bit Error Rate (BER), Least Minimum Mean Squared Error (LMMSE), Peak to Average Power Ratio (PAPR), and capacity of channel respectively for Binary Phase Shift Key (BPSK) and Quadrature Amplitude Modulation (QAM) modulation techniques.

The technique for hiding confidential data in specific digital media by enhancing the graphical contents is known as watermarking. The dissemination of information over a secure channel is essential for multimedia applications. The purpose of this study is to develop a secure communication approach for OFDM system.

This paper exploits a secure communication in the orthogonal frequency division multiplexing (OFDM) system using wavelet-based video watermarking technique. In this work, the Chronological-MS algorithm is used for securing the data communication in the OFDM system. Here, the secret message is embedded in video frames using wavelet transform for hiding sensitive information and the hidden information is transmitted over the OFDM system. The Chronological-MS algorithm is used for selecting the optimal regions in the video for embedding secret message. In embedding phase, wavelet coefficients are obtained by applying wavelet transform on the frame for embedding the secret message. Meanwhile, in extraction phase, the inverse wavelet transform is applied to extract the secret message.

Considering number of frames, the maximum Peak signal-to-noise ratio (PSNR) value is attained by proposed Wavelet + Chronological MS method for Video 2 with value 73.643 dB, respectively. Meanwhile, the minimum mean squared error (MSE) attained by the proposed Wavelet + Chronological MS method is when considering number of frames with MSE values as 0.001 for both Videos 1 and 2. The minimum bit error rate (BER) value is attained by the proposed method with value 0.00009 considering random noise with Video 1. Thus, the proposed Wavelet + Chronological MS have shown better results than the existing techniques.

This work proposes a wavelet-based watermarking method using Chronological-MS, for initiating secured communication over an OFDM. One of the main advantages of wavelets is that they offer a simultaneous localization in time and frequency domain. Hence, the proposed method offers the highly secured data transmission over the OFDM.

The manufacturing of intelligent and secure visual data transmission over the wireless sensor network is key requirement nowadays to many applications. The two-way transmission of image under a wireless channel needed image must compatible along channel characteristics such as band width, energy-efficient, time consumption and security because the image adopts big space under the device of storage and need a long time that easily undergoes cipher attacks. Moreover, Quizzical the problem for the additional time under compression results that, the secondary process of the compression followed through the acquisition consumes more time.

Hence, for resolving these issues, compressive sensing (CS) has emerged, which compressed the image at the time of sensing emerges as a speedy manner that reduces the time consumption and saves bandwidth utilization but fails under secured transmission. Several kinds of research paved path to resolve the security problems under CS through providing security such as the secondary process.

Thus, concerning the above issues, this paper proposed the Corvus corone module two-way image transmission that provides energy efficiency along CS model, secured transmission through a matrix of security under CS such as inbuilt method, which was named as compressed secured matrix and faultless reconstruction along that of eminent random matrix counting under CS.

Experimental outputs shows intelligent module gives energy efficient, secured transmission along lower computational timing also decreased bit error rate.

Watermarking technique is one of the significant methods in which carrier signal hides digital information in the form of watermark to prevent the authenticity of the stakeholders by manipulating different coefficients as watermark in time and frequency domain to sustain trade-off in performance parameters. One challenging component among others is to maintain the robustness, to limit perceptibility with embedding information. Transform domain is more popular to achieve the required results in color image watermarking. Variants of complex Hadamard transform (CHT) have been applied for gray image watermarking, and it has been proved that it has better performance than other orthogonal transforms. This paper is aimed at analyzing the performance of spatio-chromatic complex Hadamard transform (Sp-CHT) that is proposed as an application of color image watermarking in sequency domain (SD).

In this paper, color image watermarking technique is designed and implemented in SD using spatio-chromatic – conjugate symmetric sequency – ordered CHT. The color of a pixel is represented as complex number a*+jb*, where a* and b* are chromatic components of International Commission on Illumination (CIE) La*b* color space. The embedded watermark is almost transparent to human eye although robust against common signal processing attacks.

Based on the results, bit error rate (BER) and peak signal to noise ratio are measured and discussed in comparison of CIE La*b* and hue, saturation and value color model with spatio-chromatic discrete Fourier transform (Sp-DFT), and results are also analyzed with other discrete orthogonal transforms. It is observed from BER that Sp-CHT has 8%–12% better performance than Sp-DFT. Structural similarity index has been measured at different watermark strength and it is observed that presented transform performs better than other transforms.

This work presents the details and comparative analysis of two orthogonal transforms as color image watermarking application using MATLAB software. A finding from this study demonstrates that the Complex Hadamard transform is the competent candidate that can be replaced with DFT in many signal processing applications.