Search results

The purpose of this paper is to investigate the efficacy of bacterial exopolysaccharides (Eps) in reactive black 5 (RB5) textile dye wastewater bioremediation.

The Eps were produced by bacteria isolated from cotton gin trash soils collected from different cotton-growing regions in Kenya for comparison purposes. A broth medium reconstituted using molasses was assessed for its capacity to produce the Eps. RB5 textile dye wastewater was optimized for dye removal under different temperatures, times and molasses concentrations. Dye removal was studied by Lovibond-Day Light Comparator, UV–Vis spectrophotometer and FTIR.

It was found that cotton gin trash soils contained Eps-producing bacteria. Three of the Eps studied were found to have the capacity to remove at least 80% of the dye from the wastewater.

This research did not assess the efficacy of the RB5 dye removal from the wastewater by mixtures of the Eps.

Bioremediation of textile dye wastewater with Eps produced by bacteria cultured from cotton gin trash soil is significant because it will offer an effective and cleaner alternative to the chemical coagulants.

Alternative treatment of textile wastewater with the Eps would result in safer water being released into the water bodies as opposed to the chemically treated wastewater that contains remnant chemicals.

Research on the use of Eps produced by bacteria isolated from cotton gin trash soils for removal of RB5 dye from textile wastewater has not been done before.

In the last few years, environmental issues have become a matter of survival. In this sense, e-waste management is among the major problems since it may be a way of mitigating mineral depletion. In this context, the literature lacks e-waste supply chain studies that systematically map supply chain challenges and risks concerning material recovery.

Given this context, the authors' paper conducted a systematic literature review (SLR) to build a framework to identify the constructs of e-waste supply chain risk management.

The paper revealed the theoretical relationship between important variables to achieve e-waste supply chain risk management via a circular economy (CE) framework. These variables include reverse logistics (RL), closed-loop supply chains (CLSC), supply chain risk management, supply chain resilience and smart cities.

The literature contributions of this paper are as follows: (1) a complete list of the risks of the e-waste supply chains, (2) the techniques being used to identify, assess and mitigate e-waste supply chain risks and (3) the constructs that form the theoretical framework of e-waste supply chain risk management. In addition, the authors' results address important literature gaps identified by researchers and serve as a guide to implementation.

In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.

The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.

The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.

In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.

This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.

This study aims to observe the coloring efficacy of graphite (G) and nano bentonite clay (BCNPs) on the adsorption of Basic Blue 5 dye from residual dye bath solution.

Some factors that affected the adsorption processes were examined and found to have significant impacts on the adsorption capacity such as the initial concentration of G and/or BCNPs (Co: 40–2,320 mg/L), adsorbent bath pH (4–9), shaking time (30–150 min.) and initial dye concentration (40–200 mg/L). The adsorption mechanism of dye by using G and/or BCNPs was studied using two different models (first-pseudo order and second-pseudo order diffusion models). The equilibrium adsorption data for the dye understudy was analyzed by using four different models (Langmuir, Freundlich, Temkin modle and Dubinin–Radushkevich) models.

It has been found that the adsorption kinetics follow rather a pseudo-first-order kinetic model with a determination coefficient (R²) of 0.99117 for G and 0.98665 for BCNPs. The results indicate that the Freundlich model provides the best correlation for G with capacities q_max = 2.33116535 mg/g and R² = 0.99588, while the Langmuir model provides the best correlation for BCNPs with R² = 0.99074. The adsorbent elaborated from BCNPs was found to be efficient and suitable for removing basic dyes rather than G from aqueous solutions due to its availability, good adsorption capability, as well as low-cost preparation.

There is no research limitation for this work. Basic Blue 5 dye graphite (G) and nano bentonite clay (BCNPs) were used.

This work has practical applications for the textile industry. It is concluded that using graphite and nano bentonite clay can be a possible alternative to adsorb residual dye from dye bath solution and can make the process greener.

Socially, it has a good impact on the ecosystem and global community because the residual dye does not contain any carcinogenic materials.

The work is original and contains value-added products for the textile industry and other confederate fields.

The purpose of this study is to investigate the influence of light intensity and sources of carbon and nitrogen on the cultivation of Spirulina maxima.

Cultures were carried out in a modified Zarrouk medium using urea, sodium acetate and glycerol. A Taguchi experimental design was used to evaluate the effect on the production of biocompounds: productivities in biomass, carbohydrates, phycocyanin and biochar were analyzed.

Statistical data analysis revealed that light intensity and sodium acetate concentration were the most important factors, being significant in three of the four response variables studied. The highest productivities in biomass (46.94 mg.L⁻¹.d⁻¹), carbohydrates (6.11 mg.L⁻¹.d⁻¹), phycocyanin (3.62 mg.L⁻¹.d⁻¹) and biochar (22, 48 mg.L⁻¹.d⁻¹) were achieved in experiment 4 of the Taguchi matrix, highlighting as the ideal condition for the production of biomass, carbohydrates and phycocyanin.

Sodium acetate and urea can be considered, respectively, as potential sources of carbon and nitrogen to increase Spirulina maxima productivity. From the results, an optimized cultivation condition for the sustainable production of bioproducts was obtained.

This work focuses on the study of the influence of light intensity and the use of alternative sources of nitrogen and carbon on the growth of Spirulina maxima, as well as on the influence on the productivity of biomass and biocompounds. There are few studies in the literature focused on the phycocyanin production from microalgae, justifying the need to deepen the subject.

This study aims to explore the possibility of using magnetic biochar composite (MBCC) derived from Heglig tree bark (HTB) powder (agricultural solid waste) and cobalt ferrite (CoFe₂O₄, CFO) for oil spill removal from seawater surface.

One-pot co-precipitation route was used to synthesize MBCC. The prepared materials were characterized by X-ray diffraction, scanning electron microscopy-energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy. The densities of the prepared materials were also estimated. Crude, diesel engine and gasoline engine oils were used as seawater pollutant models. The gravimetric oil removal (GOR) method was used for removing oil spills from seawater using MBCC as a sorbent material.

The obtained results revealed that the prepared materials (CFO and MBCC) were able to remove the crude oil and its derivatives from the seawater surface. Besides, when the absorbent amount was 0.01 g, the highest GOR values for crude oil (31.96 ± 1.02 g/g) and diesel engine oil (14.83 ± 0.83 g/g) were obtained using MBCC as an absorbent. For gasoline engine oil, the highest GOR (27.84 ± 0.46 g/g) was attained when CFO was used as an absorbent.

Oil spill removal using MBCC derived from cobalt ferrite and HTB. Using tree bark as biomass (eco-friendly, readily available and low-cost) for magnetic biochar preparation also is a promising method for minimizing agricultural solid wastes (e.g. HTB) and obtaining value-added-products.

The focus of this study was to evaluate the relationship between research publications in the pesticide field, a country’s gross domestic product (GDP) and GDP per capita. The study aims to analyze pesticide use in association with a country’s population and research publications. The purpose of this study is to uncover the country’s contribution to pesticide research and assess the financial resources allocated to it as a percentage of their GDP by exploring these factors.

The Web of Science database was used to retrieve data for the period of 2001–2020. The use of scientometric indicators allowed for the analysis of the collaborative patterns and active performance of countries in pesticide research. Socio-economic analysis was used to determine the contribution of countries toward pesticide research.

This study demonstrated a strong association (0.952%) between a country’s GDP and its research publications in the field of pesticide research. Countries, such as Denmark, Belgium and Australia, have benefited from global collaboration, which has enhanced their research efforts. Despite ranking lower in pesticide utilization, India focused on pesticide research, as indicated by its high publication/GDP per capita ratio (0.26).

Research on pesticides directly impacts agricultural practices, which, in turn, influence the economic production of the agricultural sector. Changes in pesticide usage can have inference for crop yields, food price and, eventually, the GDP. Comparative analysis can assist in evaluating the efficiency of regulatory policies in balancing ecological concerns with economic interests. Changes in regulations may impact both pesticide usage and economic outcomes.

This study aims to identify the bioactive compounds in the Onion (Allium burdickii [A.B]) bulb using Raman and Fourier transform infrared spectroscopy (FTIR) spectroscopy. It assessed the extraction conditions of bioactive compounds from A.B. while evaluating the best extraction conditions.

The research opted for an experimental qualitative approach. It examined the extraction conditions of A.B., namely, temperature (°C), time (min) and mass-to-liquor ratio (M:R) using ultraviolet-visible spectrophotometry. Identification of bioactive compounds present in the dye was performed using Raman spectroscopy and the validation of the results was done by FTIR spectroscopy.

The study determined the best extraction conditions (time, temperature, M:R) for A.B bulb. The study confirmed the presence of bioactive compounds.

The limitation was quantification of bioactive compounds in A.B bulb.

The findings prove that the A.B. bulb can provide a sustainable source of bioactive compounds (functionalized compounds). The study provides suitable extraction conditions for A.B. and further elaborates on the techniques for identifying bioactive compounds in A.B. bulb extracts.

The study provides A.B. as a source of bioactive compounds and a clean dye for textile coloration.

To the best of the authors’ knowledge, there is no documented study on the qualitative analysis of bioactive compounds in A.B using Raman and FTIR. Therefore, the study fulfils the identified need to ascertain alternative procedures for the analysis of bioactive compounds.

The host–guest molecules are often used in various fields and applications. This paper aims to discuss the role of host–guest complexes in the textile industry, focusing on calixarenes as a potential adsorbent for hazardous dyes. The paper begins with an introduction to nanotechnology and its many uses, including textiles.

The risks associated with the utilisation of dyes and its adverse effects on the environment are then also highlighted. This paper also discusses the structure and characteristics of calixarenes and their potential use as an adsorbent to extract toxic metals from aqueous solutions. The paper also explains the molecular structure of calixarenes, especially the ability of its upper and lower rims, which can be altered to yield derivatives with various selectivities for diverse guest ions and small molecules. In addition, the application of various host–guest molecules in the textiles industry to extract dyes also had been discussed.

In conclusion, the paper highlights the essential in establishing a systematic review on the significance of selective adsorbents, such as calixarenes, to isolate particular targets from diverse matrices in the textile industry.

Only discussing several applications for several host–guest molecules.

The paper concisely describes various host–guest molecule applications in the textile industry, with each molecule being elaborated upon in detail.

The purpose of this study is to investigate the physical, ultraviolet (UV), colour appearance and colour fastness properties of selected fabrics dyed with natural dyes from Daboya and Ntonso communities of Ghana. The study further highlights the rich cultural heritage of traditional dyeing from these two communities. Craftsmen in West Africa especially Ghana, have sustained the traditional dyeing methods to produce textile products for consumers.

In this study, two sample fabrics were purchased from craftsmen at Ntonso and Daboya communities in Ghana. These fabrics were analysed at the laboratory under standard test methods for their physical, UV, colour appearance and colour fastness properties.

Results showed that all the sample fabrics have good UV shielding performance (ratings above 50+). Daboya sample fabrics (dyed with indigo dyes) produced more colour stains than the sample fabrics from Ntonso (dyed with black “kuntunkuni” dyes). The K/S_sum value or colour yield reduced after washing but that alternatively increased the calculated ultraviolet protection factor.

Findings from this study exposed the unique UV performance of dyed traditional fabrics (using natural dyes) from Ntonso and Daboya communities in Ghana. This inspires and enforces the need for craftsmen to improve their production cycle to produce these fabrics in different sizes which provides the necessary UV shielding abilities for consumers in the wake of climate changes.

This study demonstrated that the natural dyeing process at the two communities produced relatively good UV and colour fastness properties of the sample fabrics. These eco-friendly dyeing practices have survived over time to maintain and promote the concept of sustainability within the textile and fashion industry in Ghana.